From: Martin Schwidefsky <schwidefsky@de.ibm.com>
To: akpm@osdl.org, heiko.carstens@de.ibm.com, linux-kernel@vger.kernel.org
Subject: [patch 4/12] s390: external call performance.
Date: Mon, 11 Jul 2005 18:33:54 +0200 [thread overview]
Message-ID: <20050711163354.GD10822@localhost.localdomain> (raw)
[patch 4/12] s390: external call performance.
From: Heiko Carstens <heiko.carstens@de.ibm.com>
The kernel uses the SIGP external call order code to signal other
CPUs. When running with dedicated CPUs external calls don't get
delivered immediately but within a fixed polling invervall. This
can lead to delays where the system appears to do nothing. Replace
the SIGP external call order with the SIGP emergency call order
since this one gets delivered immediately.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
diffstat:
arch/s390/kernel/head.S | 2 +-
arch/s390/kernel/head64.S | 2 +-
arch/s390/kernel/s390_ext.c | 16 ++++++++++------
arch/s390/kernel/smp.c | 10 +++++-----
4 files changed, 17 insertions(+), 13 deletions(-)
diff -urpN linux-2.6/arch/s390/kernel/head64.S linux-2.6-patched/arch/s390/kernel/head64.S
--- linux-2.6/arch/s390/kernel/head64.S 2005-07-11 17:37:42.000000000 +0200
+++ linux-2.6-patched/arch/s390/kernel/head64.S 2005-07-11 17:37:44.000000000 +0200
@@ -762,7 +762,7 @@ _stext: basr %r13,0
# check control registers
stctg %c0,%c15,0(%r15)
- oi 6(%r15),0x20 # enable sigp external interrupts
+ oi 6(%r15),0x40 # enable sigp emergency signal
oi 4(%r15),0x10 # switch on low address proctection
lctlg %c0,%c15,0(%r15)
diff -urpN linux-2.6/arch/s390/kernel/head.S linux-2.6-patched/arch/s390/kernel/head.S
--- linux-2.6/arch/s390/kernel/head.S 2005-07-11 17:37:26.000000000 +0200
+++ linux-2.6-patched/arch/s390/kernel/head.S 2005-07-11 17:37:44.000000000 +0200
@@ -765,7 +765,7 @@ _stext: basr %r13,0
# check control registers
stctl %c0,%c15,0(%r15)
- oi 2(%r15),0x20 # enable sigp external interrupts
+ oi 2(%r15),0x40 # enable sigp emergency signal
oi 0(%r15),0x10 # switch on low address protection
lctl %c0,%c15,0(%r15)
diff -urpN linux-2.6/arch/s390/kernel/s390_ext.c linux-2.6-patched/arch/s390/kernel/s390_ext.c
--- linux-2.6/arch/s390/kernel/s390_ext.c 2005-06-17 21:48:29.000000000 +0200
+++ linux-2.6-patched/arch/s390/kernel/s390_ext.c 2005-07-11 17:37:44.000000000 +0200
@@ -19,7 +19,6 @@
#include <asm/irq.h>
/*
- * Simple hash strategy: index = code & 0xff;
* ext_int_hash[index] is the start of the list for all external interrupts
* that hash to this index. With the current set of external interrupts
* (0x1202 external call, 0x1004 cpu timer, 0x2401 hwc console, 0x4000
@@ -27,6 +26,11 @@
*/
ext_int_info_t *ext_int_hash[256] = { 0, };
+static inline int ext_hash(__u16 code)
+{
+ return (code + (code >> 9)) & 0xff;
+}
+
int register_external_interrupt(__u16 code, ext_int_handler_t handler)
{
ext_int_info_t *p;
@@ -37,7 +41,7 @@ int register_external_interrupt(__u16 co
return -ENOMEM;
p->code = code;
p->handler = handler;
- index = code & 0xff;
+ index = ext_hash(code);
p->next = ext_int_hash[index];
ext_int_hash[index] = p;
return 0;
@@ -52,7 +56,7 @@ int register_early_external_interrupt(__
return -EINVAL;
p->code = code;
p->handler = handler;
- index = code & 0xff;
+ index = ext_hash(code);
p->next = ext_int_hash[index];
ext_int_hash[index] = p;
return 0;
@@ -63,7 +67,7 @@ int unregister_external_interrupt(__u16
ext_int_info_t *p, *q;
int index;
- index = code & 0xff;
+ index = ext_hash(code);
q = NULL;
p = ext_int_hash[index];
while (p != NULL) {
@@ -90,7 +94,7 @@ int unregister_early_external_interrupt(
if (p == NULL || p->code != code || p->handler != handler)
return -EINVAL;
- index = code & 0xff;
+ index = ext_hash(code);
q = ext_int_hash[index];
if (p != q) {
while (q != NULL) {
@@ -120,7 +124,7 @@ void do_extint(struct pt_regs *regs, uns
*/
account_ticks(regs);
kstat_cpu(smp_processor_id()).irqs[EXTERNAL_INTERRUPT]++;
- index = code & 0xff;
+ index = ext_hash(code);
for (p = ext_int_hash[index]; p; p = p->next) {
if (likely(p->code == code)) {
if (likely(p->handler))
diff -urpN linux-2.6/arch/s390/kernel/smp.c linux-2.6-patched/arch/s390/kernel/smp.c
--- linux-2.6/arch/s390/kernel/smp.c 2005-07-11 17:37:26.000000000 +0200
+++ linux-2.6-patched/arch/s390/kernel/smp.c 2005-07-11 17:37:44.000000000 +0200
@@ -375,7 +375,7 @@ static void smp_ext_bitcall(int cpu, ec_
* Set signaling bit in lowcore of target cpu and kick it
*/
set_bit(sig, (unsigned long *) &lowcore_ptr[cpu]->ext_call_fast);
- while(signal_processor(cpu, sigp_external_call) == sigp_busy)
+ while(signal_processor(cpu, sigp_emergency_signal) == sigp_busy)
udelay(10);
}
@@ -394,7 +394,7 @@ static void smp_ext_bitcall_others(ec_bi
* Set signaling bit in lowcore of target cpu and kick it
*/
set_bit(sig, (unsigned long *) &lowcore_ptr[cpu]->ext_call_fast);
- while (signal_processor(cpu, sigp_external_call) == sigp_busy)
+ while (signal_processor(cpu, sigp_emergency_signal) == sigp_busy)
udelay(10);
}
}
@@ -751,9 +751,9 @@ void __init smp_prepare_cpus(unsigned in
unsigned int cpu;
int i;
- /* request the 0x1202 external interrupt */
- if (register_external_interrupt(0x1202, do_ext_call_interrupt) != 0)
- panic("Couldn't request external interrupt 0x1202");
+ /* request the 0x1201 emergency signal external interrupt */
+ if (register_external_interrupt(0x1201, do_ext_call_interrupt) != 0)
+ panic("Couldn't request external interrupt 0x1201");
smp_check_cpus(max_cpus);
memset(lowcore_ptr,0,sizeof(lowcore_ptr));
/*
reply other threads:[~2005-07-11 16:37 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050711163354.GD10822@localhost.localdomain \
--to=schwidefsky@de.ibm.com \
--cc=akpm@osdl.org \
--cc=heiko.carstens@de.ibm.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).