* [PATCH] Remove include/asm-arm/hardware/linkup-l1110.h
@ 2005-11-08 18:14 Alexey Dobriyan
0 siblings, 0 replies; 2+ messages in thread
From: Alexey Dobriyan @ 2005-11-08 18:14 UTC (permalink / raw)
To: Russell King; +Cc: Domen Puncer, linux-kernel, Andrew Morton
From: Domen Puncer <domen@coderock.org>
Remove nowhere referenced file ("grep linkup-l1110 -r ." didn't find anything).
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Index: linux-kj/include/asm-arm/hardware/linkup-l1110.h
===================================================================
--- linux-kj.orig/include/asm-arm/hardware/linkup-l1110.h 2005-11-08 20:47:23.000000000 +0300
+++ /dev/null 1970-01-01 00:00:00.000000000 +0000
@@ -1,48 +0,0 @@
-/*
-*
-* Definitions for H3600 Handheld Computer
-*
-* Copyright 2001 Compaq Computer Corporation.
-*
-* Use consistent with the GNU GPL is permitted,
-* provided that this copyright notice is
-* preserved in its entirety in all copies and derived works.
-*
-* COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
-* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
-* FITNESS FOR ANY PARTICULAR PURPOSE.
-*
-* Author: Jamey Hicks.
-*
-*/
-
-/* LinkUp Systems PCCard/CompactFlash Interface for SA-1100 */
-
-/* PC Card Status Register */
-#define LINKUP_PRS_S1 (1 << 0) /* voltage control bits S1-S4 */
-#define LINKUP_PRS_S2 (1 << 1)
-#define LINKUP_PRS_S3 (1 << 2)
-#define LINKUP_PRS_S4 (1 << 3)
-#define LINKUP_PRS_BVD1 (1 << 4)
-#define LINKUP_PRS_BVD2 (1 << 5)
-#define LINKUP_PRS_VS1 (1 << 6)
-#define LINKUP_PRS_VS2 (1 << 7)
-#define LINKUP_PRS_RDY (1 << 8)
-#define LINKUP_PRS_CD1 (1 << 9)
-#define LINKUP_PRS_CD2 (1 << 10)
-
-/* PC Card Command Register */
-#define LINKUP_PRC_S1 (1 << 0)
-#define LINKUP_PRC_S2 (1 << 1)
-#define LINKUP_PRC_S3 (1 << 2)
-#define LINKUP_PRC_S4 (1 << 3)
-#define LINKUP_PRC_RESET (1 << 4)
-#define LINKUP_PRC_APOE (1 << 5) /* Auto Power Off Enable: clears S1-S4 when either nCD goes high */
-#define LINKUP_PRC_CFE (1 << 6) /* CompactFlash mode Enable: addresses A[10:0] only, A[25:11] high */
-#define LINKUP_PRC_SOE (1 << 7) /* signal output driver enable */
-#define LINKUP_PRC_SSP (1 << 8) /* sock select polarity: 0 for socket 0, 1 for socket 1 */
-#define LINKUP_PRC_MBZ (1 << 15) /* must be zero */
-
-struct linkup_l1110 {
- volatile short prc;
-};
^ permalink raw reply [flat|nested] 2+ messages in thread
* [PATCH] Remove include/asm-arm/hardware/linkup-l1110.h
@ 2005-09-14 20:43 Alexey Dobriyan
0 siblings, 0 replies; 2+ messages in thread
From: Alexey Dobriyan @ 2005-09-14 20:43 UTC (permalink / raw)
To: Russell King; +Cc: Domen Puncer, linux-kernel
From: Domen Puncer <domen@coderock.org>
Remove nowhere referenced file (grep "linkup-l1110" didn't find
anything).
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
---
include/asm-arm/hardware/linkup-l1110.h | 48 --------------------------------
1 files changed, 48 deletions(-)
--- a/include/asm-arm/hardware/linkup-l1110.h 2005-09-15 00:36:56.000000000 +0400
+++ /dev/null 1970-01-01 00:00:00.000000000 +0000
@@ -1,48 +0,0 @@
-/*
-*
-* Definitions for H3600 Handheld Computer
-*
-* Copyright 2001 Compaq Computer Corporation.
-*
-* Use consistent with the GNU GPL is permitted,
-* provided that this copyright notice is
-* preserved in its entirety in all copies and derived works.
-*
-* COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
-* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
-* FITNESS FOR ANY PARTICULAR PURPOSE.
-*
-* Author: Jamey Hicks.
-*
-*/
-
-/* LinkUp Systems PCCard/CompactFlash Interface for SA-1100 */
-
-/* PC Card Status Register */
-#define LINKUP_PRS_S1 (1 << 0) /* voltage control bits S1-S4 */
-#define LINKUP_PRS_S2 (1 << 1)
-#define LINKUP_PRS_S3 (1 << 2)
-#define LINKUP_PRS_S4 (1 << 3)
-#define LINKUP_PRS_BVD1 (1 << 4)
-#define LINKUP_PRS_BVD2 (1 << 5)
-#define LINKUP_PRS_VS1 (1 << 6)
-#define LINKUP_PRS_VS2 (1 << 7)
-#define LINKUP_PRS_RDY (1 << 8)
-#define LINKUP_PRS_CD1 (1 << 9)
-#define LINKUP_PRS_CD2 (1 << 10)
-
-/* PC Card Command Register */
-#define LINKUP_PRC_S1 (1 << 0)
-#define LINKUP_PRC_S2 (1 << 1)
-#define LINKUP_PRC_S3 (1 << 2)
-#define LINKUP_PRC_S4 (1 << 3)
-#define LINKUP_PRC_RESET (1 << 4)
-#define LINKUP_PRC_APOE (1 << 5) /* Auto Power Off Enable: clears S1-S4 when either nCD goes high */
-#define LINKUP_PRC_CFE (1 << 6) /* CompactFlash mode Enable: addresses A[10:0] only, A[25:11] high */
-#define LINKUP_PRC_SOE (1 << 7) /* signal output driver enable */
-#define LINKUP_PRC_SSP (1 << 8) /* sock select polarity: 0 for socket 0, 1 for socket 1 */
-#define LINKUP_PRC_MBZ (1 << 15) /* must be zero */
-
-struct linkup_l1110 {
- volatile short prc;
-};
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2005-11-08 18:00 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-11-08 18:14 [PATCH] Remove include/asm-arm/hardware/linkup-l1110.h Alexey Dobriyan
-- strict thread matches above, loose matches on Subject: below --
2005-09-14 20:43 Alexey Dobriyan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).