From: Jeff Garzik <jgarzik@pobox.com>
To: Andrew Morton <akpm@osdl.org>, Linus Torvalds <torvalds@osdl.org>
Cc: linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [git patches] 2.6.x libata updates
Date: Wed, 9 Nov 2005 01:54:29 -0500 [thread overview]
Message-ID: <20051109065429.GA16794@havoc.gtf.org> (raw)
Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
to receive the following minor updates, and a fix:
drivers/scsi/ahci.c | 4 ++--
drivers/scsi/ata_piix.c | 3 +--
drivers/scsi/libata-core.c | 11 +++++------
drivers/scsi/libata-scsi.c | 9 +++++----
drivers/scsi/pdc_adma.c | 3 +--
drivers/scsi/sata_mv.c | 4 ++--
drivers/scsi/sata_nv.c | 3 +--
drivers/scsi/sata_promise.c | 4 ++--
drivers/scsi/sata_qstor.c | 3 +--
drivers/scsi/sata_sil.c | 3 +--
drivers/scsi/sata_sil24.c | 4 ++--
drivers/scsi/sata_sis.c | 3 +--
drivers/scsi/sata_svw.c | 3 +--
drivers/scsi/sata_sx4.c | 4 ++--
drivers/scsi/sata_uli.c | 3 +--
drivers/scsi/sata_via.c | 3 +--
drivers/scsi/sata_vsc.c | 3 +--
include/linux/libata.h | 6 +++---
18 files changed, 33 insertions(+), 43 deletions(-)
Albert Lee:
libata: if condition fix for ata_dev_identify()
Jeff Garzik:
[libata] eliminate use of drivers/scsi/scsi.h compatibility header/defines
Merge branch 'master'
Randy Dunlap:
libata kernel-doc fixes
diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
index 4612312..10c470e 100644
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -42,8 +42,8 @@
#include <linux/sched.h>
#include <linux/dma-mapping.h>
#include <linux/device.h>
-#include "scsi.h"
#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
#include <linux/libata.h>
#include <asm/io.h>
@@ -196,7 +196,7 @@ static u8 ahci_check_status(struct ata_p
static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc);
static void ahci_remove_one (struct pci_dev *pdev);
-static Scsi_Host_Template ahci_sht = {
+static struct scsi_host_template ahci_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
index 7f8aa1b..a1bd8d9 100644
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -46,7 +46,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
-#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
@@ -128,7 +127,7 @@ static struct pci_driver piix_pci_driver
.remove = ata_pci_remove_one,
};
-static Scsi_Host_Template piix_sht = {
+static struct scsi_host_template piix_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 1c1a7ca..a74b407 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -51,8 +51,8 @@
#include <linux/jiffies.h>
#include <linux/scatterlist.h>
#include <scsi/scsi.h>
-#include "scsi.h"
#include "scsi_priv.h"
+#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#include <asm/io.h>
@@ -1144,7 +1144,7 @@ retry:
* ATA software reset (SRST, the default) does not appear
* to have this problem.
*/
- if ((using_edd) && (qc->tf.command == ATA_CMD_ID_ATA)) {
+ if ((using_edd) && (dev->class == ATA_DEV_ATA)) {
u8 err = qc->tf.feature;
if (err & ATA_ABORTED) {
dev->class = ATA_DEV_ATAPI;
@@ -2713,7 +2713,7 @@ static int ata_sg_setup(struct ata_queue
/**
* ata_poll_qc_complete - turn irq back on and finish qc
* @qc: Command to complete
- * @drv_stat: ATA status register content
+ * @err_mask: ATA status register content
*
* LOCKING:
* None. (grabs host lock)
@@ -2747,7 +2747,6 @@ static unsigned long ata_pio_poll(struct
u8 status;
unsigned int poll_state = HSM_ST_UNKNOWN;
unsigned int reg_state = HSM_ST_UNKNOWN;
- const unsigned int tmout_state = HSM_ST_TMOUT;
switch (ap->hsm_task_state) {
case HSM_ST:
@@ -2768,7 +2767,7 @@ static unsigned long ata_pio_poll(struct
status = ata_chk_status(ap);
if (status & ATA_BUSY) {
if (time_after(jiffies, ap->pio_task_timeout)) {
- ap->hsm_task_state = tmout_state;
+ ap->hsm_task_state = HSM_ST_TMOUT;
return 0;
}
ap->hsm_task_state = poll_state;
@@ -3478,7 +3477,7 @@ void ata_qc_free(struct ata_queued_cmd *
/**
* ata_qc_complete - Complete an active ATA command
* @qc: Command to complete
- * @drv_stat: ATA Status register contents
+ * @err_mask: ATA Status register contents
*
* Indicate to the mid and upper layers that an ATA
* command has completed, with either an ok or not-ok status.
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index eb604b0..bb30fcd 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -37,9 +37,9 @@
#include <linux/blkdev.h>
#include <linux/spinlock.h>
#include <scsi/scsi.h>
-#include "scsi.h"
#include <scsi/scsi_host.h>
#include <scsi/scsi_device.h>
+#include <scsi/scsi_request.h>
#include <linux/libata.h>
#include <linux/hdreg.h>
#include <asm/uaccess.h>
@@ -131,7 +131,7 @@ int ata_std_bios_param(struct scsi_devic
/**
* ata_cmd_ioctl - Handler for HDIO_DRIVE_CMD ioctl
- * @dev: Device to whom we are issuing command
+ * @scsidev: Device to which we are issuing command
* @arg: User provided data for issuing command
*
* LOCKING:
@@ -217,7 +217,7 @@ error:
/**
* ata_task_ioctl - Handler for HDIO_DRIVE_TASK ioctl
- * @dev: Device to whom we are issuing command
+ * @scsidev: Device to which we are issuing command
* @arg: User provided data for issuing command
*
* LOCKING:
@@ -416,6 +416,7 @@ void ata_dump_status(unsigned id, struct
/**
* ata_to_sense_error - convert ATA error to SCSI error
+ * @id: ATA device number
* @drv_stat: value contained in ATA status register
* @drv_err: value contained in ATA error register
* @sk: the sense key we'll fill out
@@ -2231,7 +2232,7 @@ ata_scsi_map_proto(u8 byte1)
/**
* ata_scsi_pass_thru - convert ATA pass-thru CDB to taskfile
* @qc: command structure to be initialized
- * @cmd: SCSI command to convert
+ * @scsicmd: SCSI command to convert
*
* Handles either 12 or 16-byte versions of the CDB.
*
diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c
index a50588c..78b4ff1 100644
--- a/drivers/scsi/pdc_adma.c
+++ b/drivers/scsi/pdc_adma.c
@@ -41,7 +41,6 @@
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/device.h>
-#include "scsi.h"
#include <scsi/scsi_host.h>
#include <asm/io.h>
#include <linux/libata.h>
@@ -139,7 +138,7 @@ static u8 adma_bmdma_status(struct ata_p
static void adma_irq_clear(struct ata_port *ap);
static void adma_eng_timeout(struct ata_port *ap);
-static Scsi_Host_Template adma_ata_sht = {
+static struct scsi_host_template adma_ata_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c
index 0f469e3..93d5523 100644
--- a/drivers/scsi/sata_mv.c
+++ b/drivers/scsi/sata_mv.c
@@ -30,8 +30,8 @@
#include <linux/sched.h>
#include <linux/dma-mapping.h>
#include <linux/device.h>
-#include "scsi.h"
#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
#include <linux/libata.h>
#include <asm/io.h>
@@ -270,7 +270,7 @@ static irqreturn_t mv_interrupt(int irq,
static void mv_eng_timeout(struct ata_port *ap);
static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
-static Scsi_Host_Template mv_sht = {
+static struct scsi_host_template mv_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c
index d573888..37a4fae 100644
--- a/drivers/scsi/sata_nv.c
+++ b/drivers/scsi/sata_nv.c
@@ -62,7 +62,6 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/device.h>
-#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
@@ -219,7 +218,7 @@ static struct pci_driver nv_pci_driver =
.remove = ata_pci_remove_one,
};
-static Scsi_Host_Template nv_sht = {
+static struct scsi_host_template nv_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c
index b41c977..9edc9d9 100644
--- a/drivers/scsi/sata_promise.c
+++ b/drivers/scsi/sata_promise.c
@@ -39,8 +39,8 @@
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/device.h>
-#include "scsi.h"
#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
#include <linux/libata.h>
#include <asm/io.h>
#include "sata_promise.h"
@@ -94,7 +94,7 @@ static void pdc_irq_clear(struct ata_por
static int pdc_qc_issue_prot(struct ata_queued_cmd *qc);
-static Scsi_Host_Template pdc_ata_sht = {
+static struct scsi_host_template pdc_ata_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c
index 65502c1..d274ab2 100644
--- a/drivers/scsi/sata_qstor.c
+++ b/drivers/scsi/sata_qstor.c
@@ -36,7 +36,6 @@
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/device.h>
-#include "scsi.h"
#include <scsi/scsi_host.h>
#include <asm/io.h>
#include <linux/libata.h>
@@ -128,7 +127,7 @@ static u8 qs_bmdma_status(struct ata_por
static void qs_irq_clear(struct ata_port *ap);
static void qs_eng_timeout(struct ata_port *ap);
-static Scsi_Host_Template qs_ata_sht = {
+static struct scsi_host_template qs_ata_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c
index 435f7e0..d0e3c3c 100644
--- a/drivers/scsi/sata_sil.c
+++ b/drivers/scsi/sata_sil.c
@@ -42,7 +42,6 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/device.h>
-#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
@@ -131,7 +130,7 @@ static struct pci_driver sil_pci_driver
.remove = ata_pci_remove_one,
};
-static Scsi_Host_Template sil_sht = {
+static struct scsi_host_template sil_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c
index e6c8e89..4682a50 100644
--- a/drivers/scsi/sata_sil24.c
+++ b/drivers/scsi/sata_sil24.c
@@ -37,7 +37,7 @@
#include <linux/dma-mapping.h>
#include <linux/device.h>
#include <scsi/scsi_host.h>
-#include "scsi.h"
+#include <scsi/scsi_cmnd.h>
#include <linux/libata.h>
#include <asm/io.h>
@@ -255,7 +255,7 @@ static struct pci_driver sil24_pci_drive
.remove = ata_pci_remove_one, /* safe? */
};
-static Scsi_Host_Template sil24_sht = {
+static struct scsi_host_template sil24_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c
index 42288be..42d7c4e 100644
--- a/drivers/scsi/sata_sis.c
+++ b/drivers/scsi/sata_sis.c
@@ -39,7 +39,6 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/device.h>
-#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
@@ -83,7 +82,7 @@ static struct pci_driver sis_pci_driver
.remove = ata_pci_remove_one,
};
-static Scsi_Host_Template sis_sht = {
+static struct scsi_host_template sis_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c
index db615ff..9895d1c 100644
--- a/drivers/scsi/sata_svw.c
+++ b/drivers/scsi/sata_svw.c
@@ -45,7 +45,6 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/device.h>
-#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
@@ -284,7 +283,7 @@ static int k2_sata_proc_info(struct Scsi
#endif /* CONFIG_PPC_OF */
-static Scsi_Host_Template k2_sata_sht = {
+static struct scsi_host_template k2_sata_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c
index f859bbd..d5a3878 100644
--- a/drivers/scsi/sata_sx4.c
+++ b/drivers/scsi/sata_sx4.c
@@ -39,8 +39,8 @@
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/device.h>
-#include "scsi.h"
#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
#include <linux/libata.h>
#include <asm/io.h>
#include "sata_promise.h"
@@ -177,7 +177,7 @@ static void pdc20621_irq_clear(struct at
static int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc);
-static Scsi_Host_Template pdc_sata_sht = {
+static struct scsi_host_template pdc_sata_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c
index a5e245c..cf0baaa 100644
--- a/drivers/scsi/sata_uli.c
+++ b/drivers/scsi/sata_uli.c
@@ -33,7 +33,6 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/device.h>
-#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
@@ -71,7 +70,7 @@ static struct pci_driver uli_pci_driver
.remove = ata_pci_remove_one,
};
-static Scsi_Host_Template uli_sht = {
+static struct scsi_host_template uli_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c
index b3ecdbe..ab19d2b 100644
--- a/drivers/scsi/sata_via.c
+++ b/drivers/scsi/sata_via.c
@@ -42,7 +42,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
-#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#include <asm/io.h>
@@ -90,7 +89,7 @@ static struct pci_driver svia_pci_driver
.remove = ata_pci_remove_one,
};
-static Scsi_Host_Template svia_sht = {
+static struct scsi_host_template svia_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c
index bb84ba0..ce8a2fd 100644
--- a/drivers/scsi/sata_vsc.c
+++ b/drivers/scsi/sata_vsc.c
@@ -43,7 +43,6 @@
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/device.h>
-#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
@@ -219,7 +218,7 @@ static irqreturn_t vsc_sata_interrupt (i
}
-static Scsi_Host_Template vsc_sata_sht = {
+static struct scsi_host_template vsc_sata_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
diff --git a/include/linux/libata.h b/include/linux/libata.h
index dcd17e7..6f07522 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -214,7 +214,7 @@ struct ata_probe_ent {
struct list_head node;
struct device *dev;
const struct ata_port_operations *port_ops;
- Scsi_Host_Template *sht;
+ struct scsi_host_template *sht;
struct ata_ioports port[ATA_MAX_PORTS];
unsigned int n_ports;
unsigned int hard_port_no;
@@ -398,7 +398,7 @@ struct ata_port_operations {
};
struct ata_port_info {
- Scsi_Host_Template *sht;
+ struct scsi_host_template *sht;
unsigned long host_flags;
unsigned long pio_mask;
unsigned long mwdma_mask;
@@ -433,7 +433,7 @@ extern void ata_pci_remove_one (struct p
#endif /* CONFIG_PCI */
extern int ata_device_add(const struct ata_probe_ent *ent);
extern void ata_host_set_remove(struct ata_host_set *host_set);
-extern int ata_scsi_detect(Scsi_Host_Template *sht);
+extern int ata_scsi_detect(struct scsi_host_template *sht);
extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg);
extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *));
extern int ata_scsi_error(struct Scsi_Host *host);
next reply other threads:[~2005-11-09 6:54 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-11-09 6:54 Jeff Garzik [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-01-18 2:15 [git patches] 2.6.x libata updates Jeff Garzik
2006-01-18 2:33 ` Andrew Morton
2006-01-18 5:18 ` Jeff Garzik
2006-01-03 16:43 Jeff Garzik
2006-01-03 16:51 ` Bartlomiej Zolnierkiewicz
2006-01-03 16:56 ` Jeff Garzik
2006-01-03 17:32 ` Alan Cox
2006-01-03 17:43 ` Jeff Garzik
2006-01-03 18:35 ` Bartlomiej Zolnierkiewicz
2006-01-03 18:50 ` Alan Cox
2006-01-04 14:02 ` Alan Cox
2005-11-11 16:23 Jeff Garzik
2005-10-29 18:22 Jeff Garzik
2005-10-29 19:14 ` Andrew Morton
2005-10-29 19:20 ` Jeff Garzik
2005-10-29 19:37 ` Linus Torvalds
2005-10-29 20:09 ` Al Viro
2005-10-29 20:16 ` Jeff Garzik
2005-10-29 20:18 ` Nicolas Pitre
2005-10-29 21:01 ` Linus Torvalds
2005-10-30 15:46 ` Nicolas Pitre
2005-10-29 22:21 ` Andrew Morton
2005-10-29 22:30 ` Linus Torvalds
2005-10-30 0:55 ` Tony Luck
2005-10-30 2:28 ` Horst von Brand
2005-10-30 12:44 ` Rob Landley
2005-10-30 22:36 ` Linus Torvalds
2005-10-30 23:31 ` Rob Landley
2005-10-31 0:58 ` Linus Torvalds
2005-10-31 2:35 ` Rob Landley
2005-10-31 7:46 ` Junio C Hamano
2005-10-31 8:10 ` David Lang
2005-10-31 8:28 ` David Lang
2005-10-31 9:00 ` Junio C Hamano
2005-10-31 9:13 ` David Lang
2005-10-31 9:34 ` Rob Landley
2005-10-31 11:45 ` Giuseppe Bilotta
2005-10-31 17:49 ` David Lang
2005-10-31 18:06 ` Giuseppe Bilotta
2005-10-31 2:52 ` Rob Landley
2005-11-10 0:36 ` Matthias Urlichs
2005-10-30 23:59 ` Rob Landley
2005-10-31 0:16 ` Randy.Dunlap
2005-10-30 13:11 ` Pavel Machek
2005-10-31 3:55 ` David Lang
2005-10-28 0:49 Jeff Garzik
2005-10-28 16:08 ` Linus Torvalds
2005-08-29 0:25 Jeff Garzik
2005-06-28 16:59 Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20051109065429.GA16794@havoc.gtf.org \
--to=jgarzik@pobox.com \
--cc=akpm@osdl.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).