From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S965043AbVLNXiL (ORCPT ); Wed, 14 Dec 2005 18:38:11 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S965060AbVLNXiL (ORCPT ); Wed, 14 Dec 2005 18:38:11 -0500 Received: from e32.co.us.ibm.com ([32.97.110.150]:64431 "EHLO e32.co.us.ibm.com") by vger.kernel.org with ESMTP id S965043AbVLNXiJ (ORCPT ); Wed, 14 Dec 2005 18:38:09 -0500 Date: Wed, 14 Dec 2005 17:37:05 -0600 From: Jon Mason To: Muli Ben-Yehuda Cc: Linux-Kernel , muli@il.ibm.com, jgarzik@pobox.com Subject: Re: 2.6.15-rc5-mm2 does not boot on AMD64 with sata_sil Message-ID: <20051214233705.GA22464@us.ibm.com> References: <20051213103156.GD23695@granada.merseine.nu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20051213103156.GD23695@granada.merseine.nu> User-Agent: Mutt/1.5.11 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org I regressed only the sata_sil driver changes in the git-libata-all.patch, and my system now find the SATA disks. While not the final solution, it's a quick fix. Jeff, I'll be happy to test any fixes or debug drivers. Thanks, Jon On Tue, Dec 13, 2005 at 12:31:56PM +0200, Muli Ben-Yehuda wrote: > My dual AMD64 no longer boots with 2.6.15-rc5-mm2 because it can't > find its disks. 2.6.15-rc5-gitX works fine. Boot logs and lscpi > attached. > > Interesting parts of the diff between vanillalog and mmlog (trying > pci=routeirq and pci=noacpi didn't help): > > @@ -84,6 +87,11 @@ > usbcore: registered new driver hub > PCI: Using ACPI for IRQ routing > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report > +PCI: Cannot allocate resource region 0 of device 0000:01:02.0 > +PCI: Cannot allocate resource region 1 of device 0000:01:02.0 > +PCI: Cannot allocate resource region 2 of device 0000:01:02.0 > +PCI: Cannot allocate resource region 3 of device 0000:01:02.0 > +PCI: Cannot allocate resource region 4 of device 0000:01:02.0 > agpgart: Detected AMD 8151 AGP Bridge rev B3 > agpgart: AGP aperture is 256M @ 0xe0000000 > PCI-DMA: Disabling IOMMU. > @@ -164,28 +175,21 @@ > Uniform CD-ROM driver Revision: 3.20 > GSI 17 sharing vector 0xB1 and IRQ 17 > ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 17 (level, low) -> IRQ 177 > -ata1: SATA max UDMA/100 cmd 0xFFFFC20000006080 ctl 0xFFFFC2000000608A bmdma 0x7ata2: SATA max UDMA/100 cmd 0xFFFFC200000060C0 ctl 0xFFFFC200000060CA bmdma 0x7ata1: no device found (phy stat 00000000) > +ata1: SATA max UDMA/100 cmd 0xFFFFC20000006080 ctl 0xFFFFC2000000608A bmdma 0x7ata2: SATA max UDMA/100 cmd 0xFFFFC200000060C0 ctl 0xFFFFC200000060CA bmdma 0x7ata1: SATA link down (SStatus 0) > scsi0 : sata_sil > -ata2: dev 0 ATA-7, max UDMA/133, 156312576 sectors: LBA > -ata2: dev 0 configured for UDMA/100 > +ata2: SATA link up 1.5 Gbps (SStatus 113) > +ata2: dev 0 not supported, ignoring > scsi1 : sata_sil > - Vendor: ATA Model: Maxtor 6Y080M0 Rev: YAR5 > - Type: Direct-Access ANSI SCSI revision: 05 > -SCSI device sda: 156312576 512-byte hdwr sectors (80032 MB) > -SCSI device sda: drive cache: write back > -SCSI device sda: 156312576 512-byte hdwr sectors (80032 MB) > -SCSI device sda: drive cache: write back > - sda: sda1 sda2 > -sd 1:0:0:0: Attached scsi disk sda > -Fusion MPT base driver 3.03.04 > +Fusion MPT base driver 3.03.05 > Copyright (c) 1999-2005 LSI Logic Corporation > -Fusion MPT SPI Host driver 3.03.04 > +Fusion MPT SPI Host driver 3.03.05 > GSI 18 sharing vector 0xB9 and IRQ 18 > ACPI: PCI Interrupt 0000:01:03.2[C] -> GSI 16 (level, low) -> IRQ 185 > ehci_hcd 0000:01:03.2: EHCI Host Controller > ehci_hcd 0000:01:03.2: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:01:03.2: irq 185, io mem 0xf9550000 > ehci_hcd 0000:01:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > +usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 5 ports detected > GSI 19 sharing vector 0xC1 and IRQ 19 > > > Cheers, > Muli > -- > Muli Ben-Yehuda > http://www.mulix.org | http://mulix.livejournal.com/ > > ;; welcome, muli, to the one true editor! > Bootdata ok (command line is root=/dev/sda2 selinux=0 console=ttyS1,19200n8) > Linux version 2.6.15-rc5-mm2 (muli@rhun) (gcc version 3.4.1) #3 SMP Tue Dec 135BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) > BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 00000000dff60000 (usable) > BIOS-e820: 00000000dff60000 - 00000000dff72000 (ACPI data) > BIOS-e820: 00000000dff72000 - 00000000dff80000 (ACPI NVS) > BIOS-e820: 00000000dff80000 - 00000000e0000000 (reserved) > BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved) > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) > SRAT: PXM 0 -> APIC 0 -> Node 0 > SRAT: PXM 1 -> APIC 1 -> Node 1 > SRAT: Node 0 PXM 0 0-a0000 > SRAT: Node 0 PXM 0 0-e0000000 > Bootmem setup node 0 0000000000000000-00000000dff60000 > ACPI: PM-Timer IO Port: 0x8008 > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > Processor #0 15:5 APIC version 16 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > Processor #1 15:5 APIC version 16 > ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 > ACPI: IOAPIC (id[0x03] address[0xf9220000] gsi_base[24]) > IOAPIC[1]: apic_id 3, version 17, address 0xf9220000, GSI 24-27 > ACPI: IOAPIC (id[0x04] address[0xf9230000] gsi_base[28]) > IOAPIC[2]: apic_id 4, version 17, address 0xf9230000, GSI 28-31 > ACPI: IOAPIC (id[0x05] address[0xf9200000] gsi_base[32]) > IOAPIC[3]: apic_id 5, version 17, address 0xf9200000, GSI 32-35 > ACPI: IOAPIC (id[0x06] address[0xf9210000] gsi_base[36]) > IOAPIC[4]: apic_id 6, version 17, address 0xf9210000, GSI 36-39 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) > Setting APIC routing to flat > DMI present. > Using ACPI (MADT) for SMP configuration information > Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000) > Checking aperture... > CPU 0: aperture @ e0000000 size 256 MB > CPU 1: aperture @ e0000000 size 256 MB > Built 1 zonelists > Initializing CPU#0 > Kernel command line: root=/dev/sda2 selinux=0 console=ttyS1,19200n8 > PID hash table entries: 4096 (order: 12, 131072 bytes) > time.c: Using 3.579545 MHz PM timer. > time.c: Detected 2393.242 MHz processor. > Console: colour VGA+ 80x25 > Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) > Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) > Memory: 3606672k/3669376k available (3311k kernel code, 62308k reserved, 1441k)Calibrating delay using timer specific routine.. 4796.16 BogoMIPS (lpj=9592329)Mount-cache hash table entries: 256 > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 1024K (64 bytes/line) > CPU 0(1) -> Node 0 -> Core 0 > mtrr: v2.0 (20020519) > Using local APIC timer interrupts. > Detected 12.464 MHz APIC timer. > Booting processor 1/2 APIC 0x1 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 4786.72 BogoMIPS (lpj=9573445)CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 1024K (64 bytes/line) > CPU 1(1) -> Node 0 -> Core 0 > AMD Opteron(tm) Processor 250 stepping 0a > CPU 1: Syncing TSC to CPU 0. > CPU 1: synchronized TSC with CPU 0 (last diff -20 cycles, maxerr 1228 cycles) > Brought up 2 CPUs > Disabling vsyscall due to use of PM timer > time.c: Using PM based timekeeping. > testing NMI watchdog ... CPU#1: NMI appears to be stuck (19->19)! > migration_cost=866 > NET: Registered protocol family 16 > ACPI: bus type pci registered > PCI: Using configuration type 1 > ACPI: Subsystem revision 20050916 > ACPI: Interpreter enabled > ACPI: Using IOAPIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (0000:00) > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 *5 10 11) > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 10 11) *9 > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 *10 11) > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 10 *11) > ACPI: PCI Root Bridge [PCI1] (0000:08) > SCSI subsystem initialized > usbcore: registered new driver usbfs > usbcore: registered new driver hub > PCI: Using ACPI for IRQ routing > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report > PCI: Cannot allocate resource region 0 of device 0000:01:02.0 > PCI: Cannot allocate resource region 1 of device 0000:01:02.0 > PCI: Cannot allocate resource region 2 of device 0000:01:02.0 > PCI: Cannot allocate resource region 3 of device 0000:01:02.0 > PCI: Cannot allocate resource region 4 of device 0000:01:02.0 > agpgart: Detected AMD 8151 AGP Bridge rev B3 > agpgart: AGP aperture is 256M @ 0xe0000000 > PCI-DMA: Disabling IOMMU. > PCI: Bridge: 0000:00:06.0 > IO window: 2000-2fff > MEM window: f9500000-f95fffff > PREFETCH window: f9000000-f90fffff > PCI: Bridge: 0000:00:0a.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:0b.0 > IO window: disabled. > MEM window: f9600000-f96fffff > PREFETCH window: disabled. > PCI: Failed to allocate mem resource #6:20000@f8000000 for 0000:09:00.0 > PCI: Bridge: 0000:08:01.0 > IO window: disabled. > MEM window: f8000000-f8ffffff > PREFETCH window: f0000000-f7ffffff > PCI: Bridge: 0000:08:03.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:08:04.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ > Total HugeTLB memory allocated, 0 > Installing knfsd (copyright (C) 1996 okir@monad.swb.de). > io scheduler noop registered > io scheduler deadline registered > io scheduler cfq registered > PCI: MSI quirk detected. pci_msi_quirk set. > PCI: MSI quirk detected. pci_msi_quirk set. > PCI: MSI quirk detected. pci_msi_quirk set. > PCI: MSI quirk detected. pci_msi_quirk set. > ACPI: Power Button (FF) [PWRF] > ACPI: Sleep Button (FF) [SLPF] > ACPI: Power Button (CM) [PWRB] > Real Time Clock Driver v1.12 > hw_random: AMD768 system management I/O registers at 0x8000. > hw_random hardware driver 1.0.0 loaded > Linux agpgart interface v0.101 (c) Dave Jones > serio: i8042 AUX port at 0x60,0x64 irq 12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > mice: PS/2 mouse device common for all mice > FDC 0 is a National Semiconductor PC87306 > input: AT Translated Set 2 keyboard as /class/input/input0 > RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize > loop: loaded (max 8 devices) > Intel(R) PRO/1000 Network Driver - version 6.1.16-k2 > Copyright (c) 1999-2005 Intel Corporation. > e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI > e100: Copyright(c) 1999-2005 Intel Corporation > tg3.c:v3.44 (Dec 6, 2005) > GSI 16 sharing vector 0xA9 and IRQ 16 > ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 28 (level, low) -> IRQ 169 > eth0: Tigon3 [partno(none) rev 1002 PHY(5703)] (PCIX:100MHz:64-bit) 10/100/100100:0d:60:53:1f:cf > eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] > eth0: dma_rwctrl[769f4000] > forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.47. > tun: Universal TUN/TAP device driver, 1.6 > tun: (C) 1999-2004 Max Krasnyansky > netconsole: not configured, aborting > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > AMD8111: IDE controller at PCI slot 0000:00:07.1 > AMD8111: chipset revision 3 > AMD8111: not 100% native mode: will probe irqs later > AMD8111: 0000:00:07.1 (rev 03) UDMA133 controller > ide0: BM-DMA at 0x1460-0x1467, BIOS settings: hda:pio, hdb:pio > ide1: BM-DMA at 0x1468-0x146f, BIOS settings: hdc:DMA, hdd:pio > hdc: LITE-ON LTR-48327S, ATAPI CD/DVD-ROM drive > ide1 at 0x170-0x177,0x376 on irq 15 > hdc: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) > Uniform CD-ROM driver Revision: 3.20 > GSI 17 sharing vector 0xB1 and IRQ 17 > ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 17 (level, low) -> IRQ 177 > ata1: SATA max UDMA/100 cmd 0xFFFFC20000006080 ctl 0xFFFFC2000000608A bmdma 0x7ata2: SATA max UDMA/100 cmd 0xFFFFC200000060C0 ctl 0xFFFFC200000060CA bmdma 0x7ata1: SATA link down (SStatus 0) > scsi0 : sata_sil > ata2: SATA link up 1.5 Gbps (SStatus 113) > ata2: dev 0 not supported, ignoring > scsi1 : sata_sil > Fusion MPT base driver 3.03.05 > Copyright (c) 1999-2005 LSI Logic Corporation > Fusion MPT SPI Host driver 3.03.05 > GSI 18 sharing vector 0xB9 and IRQ 18 > ACPI: PCI Interrupt 0000:01:03.2[C] -> GSI 16 (level, low) -> IRQ 185 > ehci_hcd 0000:01:03.2: EHCI Host Controller > ehci_hcd 0000:01:03.2: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:01:03.2: irq 185, io mem 0xf9550000 > ehci_hcd 0000:01:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 5 ports detected > GSI 19 sharing vector 0xC1 and IRQ 19 > ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 18 (level, low) -> IRQ 193 > ohci_hcd 0000:01:03.0: OHCI Host Controller > ohci_hcd 0000:01:03.0: new USB bus registered, assigned bus number 2 > ohci_hcd 0000:01:03.0: irq 193, io mem 0xf9530000 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 3 ports detected > GSI 20 sharing vector 0xC9 and IRQ 20 > ACPI: PCI Interrupt 0000:01:03.1[B] -> GSI 19 (level, low) -> IRQ 201 > ohci_hcd 0000:01:03.1: OHCI Host Controller > ohci_hcd 0000:01:03.1: new USB bus registered, assigned bus number 3 > ohci_hcd 0000:01:03.1: irq 201, io mem 0xf9540000 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > USB Universal Host Controller Interface driver v2.3 > usbcore: registered new driver usblp > /home/muli/w/iommu/dma_ops/mm/drivers/usb/class/usblp.c: v0.13: USB Printer DerInitializing USB Mass Storage driver... > usbcore: registered new driver usb-storage > USB Mass Storage support registered. > usbcore: registered new driver usbhid > /home/muli/w/iommu/dma_ops/mm/drivers/usb/input/hid-core.c: v2.6:USB HID core rdevice-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com > Intel 810 + AC97 Audio, version 1.01, 11:43:14 Dec 13 2005 > ACPI: PCI Interrupt 0000:00:07.5[B] -> GSI 17 (level, low) -> IRQ 177 > i810: AMD-8111 IOHub found at IO 0x1400 and 0x1000, MEM 0x0000 and 0x0000, IRQ7i810_audio: Audio Controller supports 6 channels. > i810_audio: Defaulting to base 2 channel mode. > i810_audio: Resetting connection 0 > ac97_codec: AC97 codec, id: ALG96 (Unknown) > i810_audio: only 48Khz playback available. > i810_audio: AC'97 codec 0 Unable to map surround DAC's (or DAC's not present),2oprofile: using NMI interrupt. > NET: Registered protocol family 2 > IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) > TCP established hash table entries: 262144 (order: 10, 4194304 bytes) > TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > TCP: Hash tables configured (established 262144 bind 65536) > TCP reno registered > TCP bic registered > NET: Registered protocol family 1 > NET: Registered protocol family 10 > IPv6 over IPv4 tunneling driver > NET: Registered protocol family 17 > powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.60.0) > powernow-k8: MP systems not supported by PSB BIOS structure > powernow-k8: MP systems not supported by PSB BIOS structure > Root-NFS: No NFS server available, giving up. > VFS: Unable to mount root fs via NFS, trying floppy. > VFS: Insert root floppy and press ENTER > Bootdata ok (command line is root=/dev/sda2 selinux=0 console=ttyS1,19200n8) > Linux version 2.6.15-rc5 (muli@rhun) (gcc version 3.4.1) #1 SMP Tue Dec 13 11:5BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) > BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 00000000dff60000 (usable) > BIOS-e820: 00000000dff60000 - 00000000dff72000 (ACPI data) > BIOS-e820: 00000000dff72000 - 00000000dff80000 (ACPI NVS) > BIOS-e820: 00000000dff80000 - 00000000e0000000 (reserved) > BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved) > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) > SRAT: PXM 0 -> APIC 0 -> Node 0 > SRAT: PXM 1 -> APIC 1 -> Node 1 > SRAT: Node 0 PXM 0 0-a0000 > SRAT: Node 0 PXM 0 0-e0000000 > Bootmem setup node 0 0000000000000000-00000000dff60000 > ACPI: PM-Timer IO Port: 0x8008 > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > Processor #0 15:5 APIC version 16 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > Processor #1 15:5 APIC version 16 > ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 > ACPI: IOAPIC (id[0x03] address[0xf9220000] gsi_base[24]) > IOAPIC[1]: apic_id 3, version 17, address 0xf9220000, GSI 24-27 > ACPI: IOAPIC (id[0x04] address[0xf9230000] gsi_base[28]) > IOAPIC[2]: apic_id 4, version 17, address 0xf9230000, GSI 28-31 > ACPI: IOAPIC (id[0x05] address[0xf9200000] gsi_base[32]) > IOAPIC[3]: apic_id 5, version 17, address 0xf9200000, GSI 32-35 > ACPI: IOAPIC (id[0x06] address[0xf9210000] gsi_base[36]) > IOAPIC[4]: apic_id 6, version 17, address 0xf9210000, GSI 36-39 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) > Setting APIC routing to flat > Using ACPI (MADT) for SMP configuration information > Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000) > Checking aperture... > CPU 0: aperture @ e0000000 size 256 MB > CPU 1: aperture @ e0000000 size 256 MB > Built 1 zonelists > Kernel command line: root=/dev/sda2 selinux=0 console=ttyS1,19200n8 > Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 131072 bytes) > time.c: Using 3.579545 MHz PM timer. > time.c: Detected 2393.249 MHz processor. > Console: colour VGA+ 80x25 > Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) > Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) > Memory: 3606736k/3669376k available (3220k kernel code, 62244k reserved, 1400k)Calibrating delay using timer specific routine.. 4795.95 BogoMIPS (lpj=9591905)Mount-cache hash table entries: 256 > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 1024K (64 bytes/line) > CPU 0(1) -> Node 0 -> Core 0 > mtrr: v2.0 (20020519) > Using local APIC timer interrupts. > Detected 12.464 MHz APIC timer. > Booting processor 1/2 APIC 0x1 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 4786.72 BogoMIPS (lpj=9573444)CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 1024K (64 bytes/line) > CPU 1(1) -> Node 0 -> Core 0 > AMD Opteron(tm) Processor 250 stepping 0a > CPU 1: Syncing TSC to CPU 0. > CPU 1: synchronized TSC with CPU 0 (last diff -9 cycles, maxerr 1225 cycles) > Brought up 2 CPUs > Disabling vsyscall due to use of PM timer > time.c: Using PM based timekeeping. > testing NMI watchdog ... OK. > NET: Registered protocol family 16 > ACPI: bus type pci registered > PCI: Using configuration type 1 > ACPI: Subsystem revision 20050902 > ACPI: Interpreter enabled > ACPI: Using IOAPIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (0000:00) > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 *5 10 11) > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 10 11) *9 > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 *10 11) > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 10 *11) > ACPI: PCI Root Bridge [PCI1] (0000:08) > SCSI subsystem initialized > usbcore: registered new driver usbfs > usbcore: registered new driver hub > PCI: Using ACPI for IRQ routing > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report > agpgart: Detected AMD 8151 AGP Bridge rev B3 > agpgart: AGP aperture is 256M @ 0xe0000000 > PCI-DMA: Disabling IOMMU. > PCI: Bridge: 0000:00:06.0 > IO window: 2000-2fff > MEM window: f9500000-f95fffff > PREFETCH window: f9000000-f90fffff > PCI: Bridge: 0000:00:0a.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:0b.0 > IO window: disabled. > MEM window: f9600000-f96fffff > PREFETCH window: disabled. > PCI: Failed to allocate mem resource #6:20000@f8000000 for 0000:09:00.0 > PCI: Bridge: 0000:08:01.0 > IO window: disabled. > MEM window: f8000000-f8ffffff > PREFETCH window: f0000000-f7ffffff > PCI: Bridge: 0000:08:03.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:08:04.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ > Total HugeTLB memory allocated, 0 > Installing knfsd (copyright (C) 1996 okir@monad.swb.de). > io scheduler noop registered > io scheduler deadline registered > io scheduler cfq registered > PCI: MSI quirk detected. pci_msi_quirk set. > PCI: MSI quirk detected. pci_msi_quirk set. > PCI: MSI quirk detected. pci_msi_quirk set. > PCI: MSI quirk detected. pci_msi_quirk set. > ACPI: Power Button (FF) [PWRF] > ACPI: Sleep Button (FF) [SLPF] > ACPI: Power Button (CM) [PWRB] > Real Time Clock Driver v1.12 > hw_random: AMD768 system management I/O registers at 0x8000. > hw_random hardware driver 1.0.0 loaded > Linux agpgart interface v0.101 (c) Dave Jones > serio: i8042 AUX port at 0x60,0x64 irq 12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > FDC 0 is a National Semiconductor PC87306 > RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize > loop: loaded (max 8 devices) > Intel(R) PRO/1000 Network Driver - version 6.1.16-k2 > Copyright (c) 1999-2005 Intel Corporation. > e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI > e100: Copyright(c) 1999-2005 Intel Corporation > tg3.c:v3.44 (Dec 6, 2005) > GSI 16 sharing vector 0xA9 and IRQ 16 > ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 28 (level, low) -> IRQ 169 > eth0: Tigon3 [partno(none) rev 1002 PHY(5703)] (PCIX:100MHz:64-bit) 10/100/100feth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] > eth0: dma_rwctrl[769f4000] > forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.47. > tun: Universal TUN/TAP device driver, 1.6 > tun: (C) 1999-2004 Max Krasnyansky > netconsole: not configured, aborting > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > AMD8111: IDE controller at PCI slot 0000:00:07.1 > AMD8111: chipset revision 3 > AMD8111: not 100% native mode: will probe irqs later > AMD8111: 0000:00:07.1 (rev 03) UDMA133 controller > ide0: BM-DMA at 0x1460-0x1467, BIOS settings: hda:pio, hdb:pio > ide1: BM-DMA at 0x1468-0x146f, BIOS settings: hdc:DMA, hdd:pio > hdc: LITE-ON LTR-48327S, ATAPI CD/DVD-ROM drive > ide1 at 0x170-0x177,0x376 on irq 15 > hdc: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) > Uniform CD-ROM driver Revision: 3.20 > GSI 17 sharing vector 0xB1 and IRQ 17 > ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 17 (level, low) -> IRQ 177 > ata1: SATA max UDMA/100 cmd 0xFFFFC20000006080 ctl 0xFFFFC2000000608A bmdma 0x7ata2: SATA max UDMA/100 cmd 0xFFFFC200000060C0 ctl 0xFFFFC200000060CA bmdma 0x7ata1: no device found (phy stat 00000000) > scsi0 : sata_sil > ata2: dev 0 ATA-7, max UDMA/133, 156312576 sectors: LBA > ata2: dev 0 configured for UDMA/100 > scsi1 : sata_sil > Vendor: ATA Model: Maxtor 6Y080M0 Rev: YAR5 > Type: Direct-Access ANSI SCSI revision: 05 > SCSI device sda: 156312576 512-byte hdwr sectors (80032 MB) > SCSI device sda: drive cache: write back > SCSI device sda: 156312576 512-byte hdwr sectors (80032 MB) > SCSI device sda: drive cache: write back > sda: sda1 sda2 > sd 1:0:0:0: Attached scsi disk sda > Fusion MPT base driver 3.03.04 > Copyright (c) 1999-2005 LSI Logic Corporation > Fusion MPT SPI Host driver 3.03.04 > GSI 18 sharing vector 0xB9 and IRQ 18 > ACPI: PCI Interrupt 0000:01:03.2[C] -> GSI 16 (level, low) -> IRQ 185 > ehci_hcd 0000:01:03.2: EHCI Host Controller > ehci_hcd 0000:01:03.2: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:01:03.2: irq 185, io mem 0xf9550000 > ehci_hcd 0000:01:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 5 ports detected > GSI 19 sharing vector 0xC1 and IRQ 19 > ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 18 (level, low) -> IRQ 193 > ohci_hcd 0000:01:03.0: OHCI Host Controller > ohci_hcd 0000:01:03.0: new USB bus registered, assigned bus number 2 > ohci_hcd 0000:01:03.0: irq 193, io mem 0xf9530000 > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 3 ports detected > GSI 20 sharing vector 0xC9 and IRQ 20 > ACPI: PCI Interrupt 0000:01:03.1[B] -> GSI 19 (level, low) -> IRQ 201 > ohci_hcd 0000:01:03.1: OHCI Host Controller > ohci_hcd 0000:01:03.1: new USB bus registered, assigned bus number 3 > ohci_hcd 0000:01:03.1: irq 201, io mem 0xf9540000 > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > USB Universal Host Controller Interface driver v2.3 > usbcore: registered new driver usblp > /home/muli/kernel/hg/drivers/usb/class/usblp.c: v0.13: USB Printer Device ClasrInitializing USB Mass Storage driver... > usbcore: registered new driver usb-storage > USB Mass Storage support registered. > usbcore: registered new driver usbhid > /home/muli/kernel/hg/drivers/usb/input/hid-core.c: v2.6:USB HID core driver > mice: PS/2 mouse device common for all mice > device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com > input: AT Translated Set 2 keyboard as /class/input/input0 > Intel 810 + AC97 Audio, version 1.01, 11:24:59 Dec 13 2005 > ACPI: PCI Interrupt 0000:00:07.5[B] -> GSI 17 (level, low) -> IRQ 177 > i810: AMD-8111 IOHub found at IO 0x1400 and 0x1000, MEM 0x0000 and 0x0000, IRQ7input: PS/2 Generic Mouse as /class/input/input1 > i810_audio: Audio Controller supports 6 channels. > i810_audio: Defaulting to base 2 channel mode. > i810_audio: Resetting connection 0 > ac97_codec: AC97 codec, id: ALG96 (Unknown) > i810_audio: only 48Khz playback available. > i810_audio: AC'97 codec 0 Unable to map surround DAC's (or DAC's not present),2oprofile: using NMI interrupt. > NET: Registered protocol family 2 > IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) > TCP established hash table entries: 262144 (order: 10, 4194304 bytes) > TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > TCP: Hash tables configured (established 262144 bind 65536) > TCP reno registered > TCP bic registered > NET: Registered protocol family 1 > NET: Registered protocol family 10 > IPv6 over IPv4 tunneling driver > NET: Registered protocol family 17 > powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.50.4) > powernow-k8: MP systems not supported by PSB BIOS structure > powernow-k8: MP systems not supported by PSB BIOS structure > ReiserFS: sda2: found reiserfs format "3.6" with standard journal > 0000:00:06.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8111 PCI (rev 07) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=69 > I/O behind bridge: 00002000-00002fff > Memory behind bridge: f9500000-f95fffff > Prefetchable memory behind bridge: fff00000-000fffff > BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > Capabilities: [c0] #08 [0086] > Capabilities: [f0] #08 [8000] > 00: 22 10 60 74 17 00 30 02 07 00 04 06 00 40 01 00 > 10: 00 00 00 00 00 00 00 00 00 01 01 45 20 20 00 02 > 20: 50 f9 50 f9 f0 ff 00 00 00 00 00 00 14 10 b7 02 > 30: 00 00 00 00 c0 00 00 00 00 00 00 00 ff 00 06 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 04 06 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 14 10 b7 02 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 08 f0 86 00 20 00 00 00 d0 00 00 00 22 00 01 00 > d0: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 0d 00 00 00 0d 00 00 00 18 00 00 00 00 00 > f0: 08 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 > > 0000:00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-8111 LPC (rev 05) > Subsystem: IBM: Unknown device 02b7 > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > 00: 22 10 68 74 0f 00 20 02 05 00 01 06 00 00 80 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 b7 02 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 40: 80 30 07 b1 01 00 00 82 2f 00 00 01 00 00 00 c0 > 50: 00 00 00 00 8d 71 00 00 4e 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 14 10 b7 02 01 81 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 0000:00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-8111 IDE (rev 03) (prog-if 8a [Master SecP PriP]) > Subsystem: IBM: Unknown device 02b7 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 > Region 4: I/O ports at 1460 [size=16] > 00: 22 10 69 74 05 00 00 02 03 8a 01 01 00 40 00 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 61 14 00 00 00 00 00 00 00 00 00 00 14 10 b7 02 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00 > 40: 43 f0 00 00 00 00 00 00 5e 20 5e 5e a2 00 20 ff > 50: 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 14 10 b7 02 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 0000:00:07.2 SMBus: Advanced Micro Devices [AMD] AMD-8111 SMBus 2.0 (rev 02) > Subsystem: IBM: Unknown device 02b7 > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Interrupt: pin D routed to IRQ 19 > Region 0: I/O ports at 1440 [size=32] > 00: 22 10 6a 74 01 00 00 02 02 00 05 0c 00 40 00 00 > 10: 41 14 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 b7 02 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 04 00 00 > 40: 02 00 05 0c 14 10 b7 02 06 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 0000:00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-8111 ACPI (rev 05) > Subsystem: IBM: Unknown device 02b7 > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 00: 22 10 6b 74 00 00 80 02 05 00 80 06 00 40 00 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 b7 02 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 40: 80 b1 09 07 00 00 00 00 20 04 40 00 00 00 00 00 > 50: 01 81 00 00 0f 00 95 ba 01 80 00 00 00 00 00 00 > 60: 00 00 80 06 13 00 00 00 00 00 00 00 00 00 00 00 > 70: 06 29 4b d5 0c 00 00 00 00 00 00 00 14 10 b7 02 > 80: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 fe 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: b3 31 5c 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 0000:00:07.5 Multimedia audio controller: Advanced Micro Devices [AMD] AMD-8111 AC97 Audio (rev 03) > Subsystem: IBM: Unknown device 02b7 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 > Interrupt: pin B routed to IRQ 17 > Region 0: I/O ports at 1000 [size=256] > Region 1: I/O ports at 1400 [size=64] > 00: 22 10 6d 74 05 00 00 02 03 00 01 04 00 40 00 00 > 10: 01 10 00 00 01 14 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 b7 02 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 09 02 00 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 0000:00:0a.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 > Bus: primary=00, secondary=02, subordinate=02, sec-latency=64 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fff00000-000fffff > Prefetchable memory behind bridge: 00000000fff00000-0000000000000000 > BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > Capabilities: [a0] Capabilities: [b8] #08 [8000] > Capabilities: [c0] #08 [004a] > 00: 22 10 50 74 17 01 30 02 12 00 04 06 00 40 81 00 > 10: 00 00 00 00 00 00 00 00 00 02 02 40 f1 01 20 02 > 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 a0 00 00 00 00 00 00 00 ff 00 07 00 > 40: 04 00 1f 00 01 00 00 00 02 0d 00 00 01 2c 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 07 b8 c3 00 50 00 03 00 0e 00 ff ff 02 00 ff ff > b0: 00 00 00 00 00 00 00 00 08 c0 00 80 00 00 00 03 > c0: 08 00 4a 00 20 00 11 11 20 00 00 00 22 04 35 00 > d0: 02 00 35 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 11 00 00 00 12 00 00 00 14 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 0000:00:0a.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC (rev 01) (prog-if 10 [IO-APIC]) > Subsystem: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > Region 0: Memory at f9220000 (64-bit, non-prefetchable) [size=4K] > 00: 22 10 51 74 06 00 00 02 01 10 00 08 00 00 00 00 > 10: 04 00 22 f9 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 22 10 51 74 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 40: 00 00 00 00 03 00 00 00 04 00 22 f9 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 0000:00:0b.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 > Bus: primary=00, secondary=03, subordinate=03, sec-latency=64 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: f9600000-f96fffff > Prefetchable memory behind bridge: 00000000fff00000-0000000000000000 > BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > Capabilities: [a0] Capabilities: [b8] #08 [8000] > 00: 22 10 50 74 17 01 30 02 12 00 04 06 00 40 81 00 > 10: 00 00 00 00 00 00 00 00 00 03 03 40 f1 01 20 02 > 20: 60 f9 60 f9 f1 ff 01 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 a0 00 00 00 00 00 00 00 ff 00 07 00 > 40: 04 00 1f 00 01 00 00 00 00 00 00 00 01 2c 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 07 b8 83 00 58 00 03 00 0e 00 ff ff 02 00 ff ff > b0: 00 00 00 00 00 00 00 00 08 00 00 80 00 00 00 04 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 0000:00:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC (rev 01) (prog-if 10 [IO-APIC]) > Subsystem: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > Region 0: Memory at f9230000 (64-bit, non-prefetchable) [size=4K] > 00: 22 10 51 74 06 00 00 02 01 10 00 08 00 00 00 00 > 10: 04 00 23 f9 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 22 10 51 74 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 40: 00 00 00 00 03 00 00 00 04 00 23 f9 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Capabilities: [80] #08 [2101] > Capabilities: [a0] #08 [2101] > Capabilities: [c0] #08 [2101] > 00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 > 40: 01 01 05 00 04 04 01 00 01 01 01 00 01 01 01 00 > 50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00 > 60: 10 00 01 00 e4 02 00 00 00 c8 00 0f 1c 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 08 a0 01 21 20 00 11 11 22 05 75 80 02 00 00 00 > 90: 56 04 51 02 00 08 ff 00 07 00 00 00 00 00 00 00 > a0: 08 c0 01 21 20 00 11 11 22 05 75 80 02 00 00 00 > b0: 13 56 13 04 00 00 00 00 03 00 00 00 00 00 00 00 > c0: 08 00 01 21 20 00 11 11 22 04 75 80 02 00 00 00 > d0: 56 04 51 02 00 00 07 00 07 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 40: 03 00 00 00 00 00 ff 00 00 00 00 01 01 00 00 00 > 50: 00 00 00 01 02 00 00 00 00 00 00 01 03 00 00 00 > 60: 00 00 00 01 04 00 00 00 00 00 00 01 05 00 00 00 > 70: 00 00 00 01 06 00 00 00 00 00 00 01 07 00 00 00 > 80: 03 22 f9 00 20 6f f9 00 00 00 00 00 00 00 00 00 > 90: 03 00 f8 00 00 21 f9 00 03 00 e0 00 00 ff f7 00 > a0: 03 c0 fe 00 20 c0 fe 00 03 0a 00 00 00 0b 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 23 00 00 00 20 20 00 00 13 f0 ff 01 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 03 02 00 07 03 00 08 ff 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 40: 01 00 00 00 00 00 00 00 01 20 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 de e0 0f 00 00 00 00 00 de e0 0f 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 55 00 00 00 00 00 00 00 42 35 82 13 21 0b 10 00 > 90: 00 8c 33 08 08 0a 7b 0e 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 8e d6 50 be 66 00 00 00 c5 34 0c 02 40 00 40 0c > c0: 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: b6 d6 1e 5c 5e e1 8f 9f 78 25 36 ad 9e c2 1d 37 > e0: df f4 9e ff cd 60 eb 5f c5 0d 9d d6 c7 93 bf 37 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 00: 22 10 03 11 00 00 00 00 00 00 00 06 00 00 80 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 40: ff 3b 00 00 44 00 40 02 00 00 00 00 00 00 00 00 > 50: f8 ff ff ff ff 00 00 00 00 00 02 00 40 44 1c 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 11 01 02 51 11 80 00 50 00 38 00 08 1b 22 00 00 > 80: 00 00 07 23 13 21 13 00 00 00 00 00 00 00 00 00 > 90: 07 00 00 00 70 00 00 00 00 d0 37 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 3f 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 07 07 e2 04 00 00 00 00 00 25 00 00 > e0: 00 00 00 00 20 0d 59 00 1b 01 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 0000:00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Capabilities: [80] #08 [2101] > Capabilities: [a0] #08 [2101] > Capabilities: [c0] #08 [2101] > 00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 > 40: 04 04 01 00 01 01 05 00 01 01 01 00 01 01 01 00 > 50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00 > 60: 11 00 01 00 e4 00 00 00 00 c8 00 0f 04 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 08 a0 01 21 d0 00 11 77 22 00 75 80 02 00 00 00 > 90: 02 30 10 06 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 08 c0 01 21 20 00 11 11 22 05 75 80 02 00 00 00 > b0: 13 56 13 04 00 00 00 00 03 00 00 00 00 00 00 00 > c0: 08 00 01 21 d0 00 11 77 22 00 75 80 02 00 00 00 > d0: 26 16 00 01 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 0000:00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 40: 03 00 00 00 00 00 ff 00 00 00 00 01 01 00 00 00 > 50: 00 00 00 01 02 00 00 00 00 00 00 01 03 00 00 00 > 60: 00 00 00 01 04 00 00 00 00 00 00 01 05 00 00 00 > 70: 00 00 00 01 06 00 00 00 00 00 00 01 07 00 00 00 > 80: 03 22 f9 00 20 6f f9 00 00 00 00 00 00 00 00 00 > 90: 03 00 f8 00 00 21 f9 00 03 00 e0 00 00 ff f7 00 > a0: 03 c0 fe 00 20 c0 fe 00 03 0a 00 00 00 0b 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 23 00 00 00 20 20 00 00 13 f0 ff 01 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 03 02 00 07 03 00 08 ff 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 0000:00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 08 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 62 43 56 be 66 00 00 00 55 af 00 00 09 00 40 10 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 51 ff e2 ae c3 88 b6 82 06 0d e9 6e 35 d8 00 d1 > e0: 49 7f fb cc 53 d2 b6 ff 82 85 e5 3a 54 fb 84 ea > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 0000:00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 00: 22 10 03 11 00 00 00 00 00 00 00 06 00 00 80 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 40: ff 3b 00 00 44 00 40 02 00 00 00 00 00 00 00 00 > 50: f8 7b 00 00 fa 00 00 00 00 00 02 00 80 00 20 10 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 11 01 02 51 11 80 00 50 00 38 00 08 1b 22 00 00 > 80: 00 00 07 23 13 21 13 00 00 00 00 00 00 00 00 00 > 90: 07 00 00 00 70 00 00 00 00 d0 37 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 3e 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 07 07 e2 04 00 00 00 00 00 25 25 00 > e0: 00 00 00 00 20 0c 59 00 1b 01 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 0000:01:02.0 IDE interface: Silicon Image, Inc. (formerly CMD Technology Inc) SiI 3512 [SATALink/SATARaid] Serial ATA Controller (rev 01) (prog-if 85 [Master SecO PriO]) > Subsystem: IBM: Unknown device 3512 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64, cache line size 10 > Interrupt: pin A routed to IRQ 17 > Region 0: I/O ports at 2020 [size=8] > Region 1: I/O ports at 2014 [size=4] > Region 2: I/O ports at 2018 [size=8] > Region 3: I/O ports at 2010 [size=4] > Region 4: I/O ports at 2000 [size=16] > Region 5: Memory at f9520000 (32-bit, non-prefetchable) [size=512] > Capabilities: [60] Power Management version 2 > Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=2 PME- > 00: 95 10 12 35 07 00 b0 02 01 85 01 01 10 40 00 00 > 10: 21 20 00 00 15 20 00 00 19 20 00 00 11 20 00 00 > 20: 01 20 00 00 00 00 52 f9 00 00 00 00 14 10 12 35 > 30: 00 00 00 00 60 00 00 00 00 00 00 00 09 01 00 00 > 40: 02 00 00 00 97 dd d2 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 01 00 22 06 00 40 00 64 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 60 00 00 00 cd de > 80: 22 00 00 00 03 00 00 00 00 00 00 00 67 9d 76 1d > 90: 00 00 00 08 ff ff 00 00 00 00 00 08 ff 00 00 00 > a0: 01 21 15 65 dd 62 dd 62 92 43 92 43 09 40 09 40 > b0: 01 21 15 65 dd 62 dd 62 92 43 92 43 09 40 09 40 > c0: 84 01 00 00 13 01 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 0000:01:03.0 USB Controller: NEC Corporation USB (rev 43) (prog-if 10 [OHCI]) > Subsystem: IBM: Unknown device 02b7 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 (250ns min, 10500ns max), cache line size 10 > Interrupt: pin A routed to IRQ 18 > Region 0: Memory at f9530000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > 00: 33 10 35 00 16 00 10 02 43 10 03 0c 10 40 80 00 > 10: 00 00 53 f9 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 b7 02 > 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 01 2a > 40: 01 00 02 7e 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 05 33 b0 6c 20 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 0000:01:03.1 USB Controller: NEC Corporation USB (rev 43) (prog-if 10 [OHCI]) > Subsystem: IBM: Unknown device 02b7 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 (250ns min, 10500ns max), cache line size 10 > Interrupt: pin B routed to IRQ 19 > Region 0: Memory at f9540000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > 00: 33 10 35 00 16 00 10 02 43 10 03 0c 10 40 00 00 > 10: 00 00 54 f9 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 b7 02 > 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 02 01 2a > 40: 01 00 02 7e 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 0000:01:03.2 USB Controller: NEC Corporation USB 2.0 (rev 04) (prog-if 20 [EHCI]) > Subsystem: IBM: Unknown device 02b7 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 132 (4000ns min, 8500ns max), cache line size 10 > Interrupt: pin C routed to IRQ 16 > Region 0: Memory at f9550000 (32-bit, non-prefetchable) [size=256] > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > 00: 33 10 e0 00 16 00 10 02 04 20 03 0c 10 84 00 00 > 10: 00 00 55 f9 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 b7 02 > 30: 00 00 00 00 40 00 00 00 00 00 00 00 05 03 10 22 > 40: 01 00 02 7e 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 20 20 3f 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 05 33 b0 6c 20 00 00 00 01 00 00 00 00 00 08 c0 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 0000:01:04.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI]) > Subsystem: IBM: Unknown device 02b7 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 (500ns min, 1000ns max), cache line size 10 > Interrupt: pin A routed to IRQ 19 > Region 0: Memory at f9570000 (32-bit, non-prefetchable) [size=2K] > Region 1: Memory at f9560000 (32-bit, non-prefetchable) [size=16K] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME+ > 00: 4c 10 23 80 16 00 10 02 00 10 00 0c 10 40 00 00 > 10: 00 00 57 f9 00 00 56 f9 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 b7 02 > 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 02 04 > 40: 00 00 00 00 01 00 02 7e 00 80 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 00 > f0: 10 00 00 00 82 10 00 00 14 10 b7 02 00 00 00 00 > > 0000:03:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5703X Gigabit Ethernet (rev 02) > Subsystem: IBM: Unknown device 026f > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 (16000ns min), cache line size 10 > Interrupt: pin A routed to IRQ 28 > Region 0: Memory at f9600000 (64-bit, non-prefetchable) [size=64K] > Capabilities: [40] PCI-X non-bridge device. > Command: DPERE- ERO- RBC=2 OST=0 > Status: Bus=3 Dev=2 Func=1 64bit+ 133MHz+ SCD- USC-, DC=simple, DMMRBC=2, DMOST=0, DMCRS=1, RSCEM- Capabilities: [48] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=1 PME- > Capabilities: [50] Vital Product Data > Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable- > Address: 0260d4c6cb641f4c Data: b315 > 00: e4 14 a7 16 06 00 b0 02 02 00 00 02 10 40 00 00 > 10: 04 00 60 f9 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 6f 02 > 30: 00 00 00 00 40 00 00 00 00 00 00 00 05 01 40 00 > 40: 07 48 08 00 11 03 43 04 01 50 02 c0 00 20 00 64 > 50: 03 58 44 00 f5 71 4e 18 05 00 86 00 4c 1f 64 cb > 60: c6 d4 60 02 15 b3 00 00 98 00 02 10 00 40 9f 76 > 70: e2 10 00 00 a6 00 00 80 4c 5b 03 00 00 00 00 00 > 80: 00 00 00 00 02 37 98 90 34 00 13 04 82 10 08 00 > 90: 09 97 00 01 01 00 00 00 00 00 00 00 6e 01 00 00 > a0: 00 00 00 00 a6 00 00 00 00 00 00 00 aa 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 0000:08:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-8151 System Controller (rev 14) > Subsystem: IBM: Unknown device 02b7 > Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M] > Capabilities: [a0] AGP version 3.0 > Status: RQ=32 Iso- ArqSz=0 Cal=2 SBA+ ITACoh+ GART64- HTrans- 64bit+ FW+ AGP3+ Rate=x4,x8 > Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate= > Capabilities: [c0] #08 [0060] > 00: 22 10 54 74 02 00 10 02 14 00 00 06 00 00 00 00 > 10: 08 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 b7 02 > 30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 > 40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 0b 00 19 00 0b 00 19 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 02 c0 30 00 3b 0b 00 1f 00 02 00 00 00 00 00 00 > b0: 00 01 00 00 00 0f 01 00 00 00 00 00 00 00 00 00 > c0: 08 00 60 00 20 00 11 11 20 00 00 00 22 05 35 00 > d0: 02 02 35 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 08 08 0d 00 08 08 0e 00 0f 0f 15 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 0000:08:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8151 AGP Bridge (rev 14) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 99 > Bus: primary=08, secondary=09, subordinate=0d, sec-latency=68 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: f8000000-f8ffffff > Prefetchable memory behind bridge: f0000000-f7ffffff > BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- > 00: 22 10 55 74 07 00 20 02 14 00 04 06 00 63 01 00 > 10: 00 00 00 00 00 00 00 00 08 09 0d 44 f1 01 20 22 > 20: 00 f8 f0 f8 00 f0 f0 f7 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 0c 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 0000:08:03.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 > Bus: primary=08, secondary=0e, subordinate=12, sec-latency=64 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fff00000-000fffff > Prefetchable memory behind bridge: 00000000fff00000-0000000000000000 > BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > Capabilities: [a0] Capabilities: [b8] #08 [8000] > Capabilities: [c0] #08 [0043] > 00: 22 10 50 74 17 01 30 02 12 00 04 06 00 40 81 00 > 10: 00 00 00 00 00 00 00 00 08 0e 12 40 f1 01 20 22 > 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 a0 00 00 00 00 00 00 00 ff 00 07 00 > 40: 04 00 1f 00 01 00 00 00 02 0b 00 00 01 2c 00 00 > 50: 00 00 03 00 00 00 05 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 07 b8 83 00 18 08 03 00 0e 00 ff ff 02 00 ff ff > b0: 00 00 00 00 00 00 00 00 08 c0 00 80 00 00 00 05 > c0: 08 00 43 00 20 00 11 00 d0 00 00 77 22 02 35 00 > d0: 02 00 35 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 0f 00 00 00 0d 00 00 00 15 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 0000:08:03.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC (rev 01) (prog-if 10 [IO-APIC]) > Subsystem: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > Region 0: Memory at f9200000 (64-bit, non-prefetchable) [size=4K] > 00: 22 10 51 74 06 00 00 02 01 10 00 08 00 00 00 00 > 10: 04 00 20 f9 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 22 10 51 74 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 40: 00 00 00 00 03 00 00 00 04 00 20 f9 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 0000:08:04.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 > Bus: primary=08, secondary=13, subordinate=17, sec-latency=64 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fff00000-000fffff > Prefetchable memory behind bridge: 00000000fff00000-0000000000000000 > BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > Capabilities: [a0] Capabilities: [b8] #08 [8000] > 00: 22 10 50 74 17 01 30 02 12 00 04 06 00 40 81 00 > 10: 00 00 00 00 00 00 00 00 08 13 17 40 f1 01 20 22 > 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 a0 00 00 00 00 00 00 00 ff 00 07 00 > 40: 04 00 1f 00 01 00 00 00 00 00 00 00 01 2c 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 07 b8 83 00 20 08 03 00 0e 00 ff ff 02 00 ff ff > b0: 00 00 00 00 00 00 00 00 08 00 00 80 00 00 00 06 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 0000:08:04.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC (rev 01) (prog-if 10 [IO-APIC]) > Subsystem: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > Region 0: Memory at f9210000 (64-bit, non-prefetchable) [size=4K] > 00: 22 10 51 74 06 00 00 02 01 10 00 08 00 00 00 00 > 10: 04 00 21 f9 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 22 10 51 74 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 40: 00 00 00 00 03 00 00 00 04 00 21 f9 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 0000:09:00.0 VGA compatible controller: nVidia Corporation NV36GL [Quadro FX 1100] (rev a1) (prog-if 00 [VGA]) > Subsystem: nVidia Corporation: Unknown device 01da > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 (1250ns min, 250ns max) > Interrupt: pin A routed to IRQ 16 > Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=16M] > Region 1: Memory at f0000000 (32-bit, prefetchable) [size=128M] > Capabilities: [60] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [44] AGP version 3.0 > Status: RQ=32 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8 > Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate= > 00: de 10 4e 03 07 00 b0 02 a1 00 00 03 00 40 00 00 > 10: 00 00 00 f8 08 00 00 f0 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 de 10 da 01 > 30: 00 00 00 00 60 00 00 00 00 00 00 00 05 01 05 01 > 40: de 10 da 01 02 00 30 00 1b 0e 00 1f 00 00 00 00 > 50: 01 00 00 00 01 00 00 00 ce d6 23 00 0f 00 00 00 > 60: 01 44 02 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >