[    0.000000] Linux version 2.6.16-rc1-mm2-4 (mattia@inferi) (gcc version 4.0.3 20051201 (prerelease) (Debian 4.0.2-5)) #11 PREEMPT Wed Jan 25 16:14:11 CET 2006
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[    0.000000]  BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000c0000 - 00000000000d0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d8000 - 00000000000e0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000000fef0000 (usable)
[    0.000000]  BIOS-e820: 000000000fef0000 - 000000000feff000 (ACPI data)
[    0.000000]  BIOS-e820: 000000000feff000 - 000000000ff00000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000000ff00000 - 000000000ff80000 (usable)
[    0.000000]  BIOS-e820: 000000000ff80000 - 0000000010000000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
[    0.000000] 255MB LOWMEM available.
[    0.000000] On node 0 totalpages: 65408
[    0.000000]   DMA zone: 4096 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 0 pages, LIFO batch:0
[    0.000000]   Normal zone: 61312 pages, LIFO batch:15
[    0.000000]   HighMem zone: 0 pages, LIFO batch:0
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f6cd0
[    0.000000] ACPI: RSDT (v001 SONY   C0       0x20010809 PTL  0x00000000) @ 0x0fefa88f
[    0.000000] ACPI: FADT (v001   SONY       C0 0x20010809 PTL  0x01000000) @ 0x0fefef64
[    0.000000] ACPI: BOOT (v001   SONY       C0 0x20010809 PTL  0x00000001) @ 0x0fefefd8
[    0.000000] ACPI: DSDT (v001   SONY       C0 0x20010809 PTL  0x0100000d) @ 0x00000000
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:ef800000)
[    0.000000] Detected 994.266 MHz processor.
[   12.410522] Built 1 zonelists
[   12.410527] Local APIC disabled by BIOS -- reenabling.
[   12.410532] Found and enabled local APIC!
[   12.410538] mapped APIC to ffffd000 (fee00000)
[   12.410544] Enabling fast FPU save and restore... done.
[   12.410549] Enabling unmasked SIMD FPU exception support... done.
[   12.410555] Initializing CPU#0
[   12.410568] Kernel command line: root=/dev/hda1 ro vga=extended video=radeonfb:800x600-32@60 fbcon=font:Acorn8x8 lapic resume=/dev/hda2
[   12.411135] CPU 0 irqstacks, hard=c0418000 soft=c0419000
[   12.411143] PID hash table entries: 1024 (order: 10, 16384 bytes)
[   12.817018] Console: colour VGA+ 80x50
[   12.818471] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[   12.819128] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[   12.833814] Memory: 255104k/261632k available (2073k kernel code, 5908k reserved, 916k data, 152k init, 0k highmem)
[   12.833862] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   12.910722] Calibrating delay using timer specific routine.. 1989.93 BogoMIPS (lpj=3979867)
[   12.910873] Mount-cache hash table entries: 512
[   12.911086] CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
[   12.911100] CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
[   12.911116] CPU: L1 I cache: 16K, L1 D cache: 16K
[   12.911189] CPU: L2 cache: 512K
[   12.911230] CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000
[   12.911241] Intel machine check architecture supported.
[   12.911286] Intel machine check reporting enabled on CPU#0.
[   12.911340] mtrr: v2.0 (20020519)
[   12.911386] CPU: Intel(R) Pentium(R) III Mobile CPU      1000MHz stepping 01
[   12.911492] Checking 'hlt' instruction... OK.
[   12.929066]  tbxface-0111 [02] load_tables           : ACPI Tables successfully acquired
[   12.941047] Parsing all Control Methods:
[   12.941593] Table [DSDT](id 0005) - 555 Objects with 54 Devices 191 Methods 21 Regions
[   12.941685] ACPI Namespace successfully loaded at root c044b278
[   12.975432] evxfevnt-0090 [03] enable                : Transition to ACPI mode successful
[   13.083137] NET: Registered protocol family 16
[   13.083210] ACPI: bus type pci registered
[   13.086771] PCI: PCI BIOS revision 2.10 entry at 0xfd9aa, last bus=2
[   13.086822] PCI: Using configuration type 1
[   13.087094] ACPI: Subsystem revision 20060113
[   13.089056] evgpeblk-0933 [06] ev_create_gpe_block   : GPE 00 to 0F [_GPE] 2 regs on int 0x9
[   13.089201] evgpeblk-0933 [06] ev_create_gpe_block   : GPE 10 to 1F [_GPE] 2 regs on int 0x9
[   13.090767] evgpeblk-1029 [05] ev_initialize_gpe_bloc: Found 6 Wake, Enabled 0 Runtime GPEs in this block
[   13.091647] evgpeblk-1029 [05] ev_initialize_gpe_bloc: Found 1 Wake, Enabled 0 Runtime GPEs in this block
[   13.097051] Completing Region/Field/Buffer/Package initialization:..............................................................
[   13.104249] Initialized 20/21 Regions 0/0 Fields 25/25 Buffers 17/27 Packages (564 nodes)
[   13.104338] Executing all Device _STA and_INI methods:..........................................................
[   13.114485] 58 Devices found containing: 3 _STA, 3 _INI methods
[   13.114606] ACPI: Interpreter enabled
[   13.114648] ACPI: Using PIC for interrupt routing
[   13.116505] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   13.116551] PCI: Probing PCI hardware (bus 00)
[   13.154760] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[   13.154809] PCI quirk: region 1180-11bf claimed by ICH4 GPIO
[   13.154895] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[   13.155139] Boot video device is 0000:01:00.0
[   13.155380] PCI: Transparent bridge - 0000:00:1e.0
[   13.155500] PCI: Bus #03 (-#06) may be hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
[   13.155609] PCI: Bus #07 (-#0a) may be hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
[   13.155696] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   13.173776] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[   13.176781] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
[   13.184021] ACPI: Embedded Controller [EC0] (gpe 28) interrupt mode.
[   13.228438] ACPI: PCI Interrupt Link [LNKA] (IRQs *9)
[   13.229860] pci_link-0238 [09] pci_link_check_current: Resource isn't an IRQ
[   13.229968] ACPI: PCI Interrupt Link [LNKB] (IRQs 9) *0, disabled.
[   13.231454] pci_link-0238 [09] pci_link_check_current: Resource isn't an IRQ
[   13.231561] ACPI: PCI Interrupt Link [LNKC] (IRQs 9) *0, disabled.
[   13.233238] ACPI: PCI Interrupt Link [LNKD] (IRQs *9)
[   13.234884] ACPI: PCI Interrupt Link [LNKE] (IRQs *9)
[   13.236503] pci_link-0238 [09] pci_link_check_current: Resource isn't an IRQ
[   13.236610] ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0
[   13.238057] pci_link-0238 [09] pci_link_check_current: Resource isn't an IRQ
[   13.238165] ACPI: PCI Interrupt Link [LNKG] (IRQs 9) *0, disabled.
[   13.239663] pci_link-0238 [09] pci_link_check_current: Resource isn't an IRQ
[   13.239771] ACPI: PCI Interrupt Link [LNKH] (IRQs 9) *0, disabled.
[   13.240543] Linux Plug and Play Support v0.97 (c) Adam Belay
[   13.240684] PCI: Using ACPI for IRQ routing
[   13.240728] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   13.245914] PCI: Bridge: 0000:00:01.0
[   13.245959]   IO window: 3000-3fff
[   13.246003]   MEM window: d0100000-d01fffff
[   13.246046]   PREFETCH window: d8000000-dfffffff
[   13.246108] PCI: Bus 3, cardbus bridge: 0000:02:05.0
[   13.246151]   IO window: 00004400-000044ff
[   13.246195]   IO window: 00004800-000048ff
[   13.246238]   PREFETCH window: 20000000-21ffffff
[   13.246283]   MEM window: 24000000-25ffffff
[   13.246326] PCI: Bus 7, cardbus bridge: 0000:02:05.1
[   13.246369]   IO window: 00004c00-00004cff
[   13.246413]   IO window: 00001400-000014ff
[   13.246473]   PREFETCH window: 22000000-23ffffff
[   13.246517]   MEM window: 26000000-27ffffff
[   13.246560] PCI: Bridge: 0000:00:1e.0
[   13.246602]   IO window: 4000-4fff
[   13.246647]   MEM window: d0200000-d02fffff
[   13.246690]   PREFETCH window: 20000000-23ffffff
[   13.246748] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   13.248087] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 9
[   13.248135] PCI: setting IRQ 9 as level-triggered
[   13.248140] ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKF] -> GSI 9 (level, low) -> IRQ 9
[   13.248255] PCI: Setting latency timer of device 0000:02:05.0 to 64
[   13.249554] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 9
[   13.249599] ACPI: PCI Interrupt 0000:02:05.1[B] -> Link [LNKG] -> GSI 9 (level, low) -> IRQ 9
[   13.249714] PCI: Setting latency timer of device 0000:02:05.1 to 64
[   13.249807] Simple Boot Flag at 0x36 set to 0x1
[   13.249919] speedstep: frequency transition measured seems out of range (0 nSec), falling back to a safe one of 500000 nSec.
[   13.251300] Initializing Cryptographic API
[   13.251350] io scheduler noop registered
[   13.251427] io scheduler anticipatory registered
[   13.251503] io scheduler deadline registered
[   13.251591] io scheduler cfq registered
[   13.251880] acpi_bus-0201 [01] bus_set_power         : Device is not power manageable
[   13.253411] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
[   13.253458] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
[   13.262095] radeonfb: Retrieved PLL infos from BIOS
[   13.262142] radeonfb: Reference=27.00 MHz (RefDiv=60) Memory=166.00 Mhz, System=166.00 MHz
[   13.262195] radeonfb: PLL min 12000 max 35000
[   14.197262] Non-DDC laptop panel detected
[   15.192430] radeonfb: Monitor 1 type LCD found
[   15.192473] radeonfb: Monitor 2 type no found
[   15.192521] radeonfb: panel ID string: Samsung LTN150P1-L02    
[   15.192566] radeonfb: detected LVDS panel size from BIOS: 1400x1050
[   15.192611] radeondb: BIOS provided dividers will be used
[   15.428232] radeonfb: Dynamic Clock Power Management enabled
[   15.700014] Console: switching to colour frame buffer device 100x75
[   15.700876] radeonfb (0000:01:00.0): ATI Radeon LY 
[   15.703422] ACPI: AC Adapter [ACAD] (on-line)
[   15.712433] ACPI: Battery Slot [BAT1] (battery present)
[   15.714762] ACPI: Battery Slot [BAT2] (battery absent)
[   15.714885] ACPI: Lid Switch [LID]
[   15.714972] ACPI: Power Button (CM) [PWRB]
[   15.715318] ACPI: CPU0 (power states: C1[C1] C2[C2])
[   15.722466] ACPI: Thermal Zone [ATF0] (32 C)
[   15.722599] isapnp: Scanning for PnP cards...
[   16.076144] isapnp: No Plug & Play device found
[   16.112827] PNP: No PS/2 controller found. Probing ports directly.
[   16.114760] serio: i8042 AUX port at 0x60,0x64 irq 12
[   16.114951] serio: i8042 KBD port at 0x60,0x64 irq 1
[   16.115213] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   16.115378] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   16.115615] ICH3M: IDE controller at PCI slot 0000:00:1f.1
[   16.115730] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[   16.115850]  pci_irq-0384 [02] pci_irq_derive        : Unable to derive IRQ for device 0000:00:1f.1
[   16.116049] ACPI: PCI Interrupt 0000:00:1f.1[A]: no GSI
[   16.116171] ICH3M: chipset revision 1
[   16.116246] ICH3M: not 100% native mode: will probe irqs later
[   16.116366]     ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
[   16.116542]     ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:pio, hdd:pio
[   16.116712] Probing IDE interface ide0...
[   16.126748] hda: FUJITSU MHV2080AH, ATA DISK drive
[   16.138085] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[   16.144008] Probing IDE interface ide1...
[   16.154339] Probing IDE interface ide1...
[   16.164642] hda: max request size: 128KiB
[   16.170849] hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
[   16.176942] hda: cache flushes supported
[   16.182989]  hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
[   16.190007] mice: PS/2 mouse device common for all mice
[   16.196091] NET: Registered protocol family 2
[   16.203089] input: AT Translated Set 2 keyboard as /class/input/input0
[   16.209339] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[   16.215706] TCP established hash table entries: 16384 (order: 4, 65536 bytes)
[   16.222074] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[   16.228457] TCP: Hash tables configured (established 16384 bind 16384)
[   16.234774] TCP reno registered
[   16.241210] TCP bic registered
[   16.247513] NET: Registered protocol family 1
[   16.253823] NET: Registered protocol family 17
[   16.260092] Using IPI Shortcut mode
[   16.295333] ACPI wakeup devices: 
[   16.301587] PWRB USB1 USB2 USB3 CRD0 CRD1  LAN  EC0 COMA MODE 
[   16.308019] ACPI: (supports S0 S3 S4 S5)
[   16.315008] ReiserFS: hda1: found reiserfs format "3.6" with standard journal
[   16.321676] Time: tsc clocksource has been installed.
[   16.327942] TSC clocksource: 994266 khz, rating=300 mult=4218493 shift=22
[   16.335692] check_periodic_interval: short interval! 751599 ns.
[   16.341946] 		bad calibration or timers may be broken.
[   16.348804] check_periodic_interval: short interval! 13123774 ns.
[   16.355035] 		bad calibration or timers may be broken.
[   16.361340] ReiserFS: hda1: using ordered data mode
[   16.367772] ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   16.383013] ReiserFS: hda1: checking transaction log (hda1)
[   16.390031] check_periodic_interval: short interval! 41260308 ns.
[   16.396555] 		bad calibration or timers may be broken.
[   16.403377] ReiserFS: hda1: Using r5 hash to sort names
[   16.409877] VFS: Mounted root (reiserfs filesystem) readonly.
[   16.416543] Freeing unused kernel memory: 152k freed
[   16.423208] check_periodic_interval: short interval! 33206471 ns.
[   16.429595] 		bad calibration or timers may be broken.
[   16.437094] check_periodic_interval: short interval! 13897048 ns.
[   16.443497] 		bad calibration or timers may be broken.
[   16.450426] check_periodic_interval: short interval! 13346943 ns.
[   16.456807] 		bad calibration or timers may be broken.
[   16.464487] check_periodic_interval: short interval! 14072404 ns.
[   16.470921] 		bad calibration or timers may be broken.
[   16.478931] check_periodic_interval: short interval! 14457901 ns.
[   16.485454] 		bad calibration or timers may be broken.
[   16.492877] check_periodic_interval: short interval! 13959022 ns.
[   16.499432] 		bad calibration or timers may be broken.
[   16.508801] check_periodic_interval: short interval! 15935332 ns.
[   16.515424] 		bad calibration or timers may be broken.
[   18.094914] Linux agpgart interface v0.101 (c) Dave Jones
[   18.111366] agpgart: Detected an Intel 830M Chipset.
[   18.133361] agpgart: AGP aperture is 256M @ 0xe0000000
[   18.150469] usbcore: registered new driver usbfs
[   18.157395] usbcore: registered new driver hub
[   18.177002] USB Universal Host Controller Interface driver v3.0
[   18.183960] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
[   18.191260] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   18.191268] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   18.198506] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   18.205596] uhci_hcd 0000:00:1d.0: irq 9, io base 0x00001800
[   18.212709] usb usb1: configuration #1 chosen from 1 choice
[   18.221127] hub 1-0:1.0: USB hub found
[   18.228084] hub 1-0:1.0: 2 ports detected
[   18.348201] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
[   18.355094] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
[   18.362024] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   18.362031] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   18.368958] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   18.375987] uhci_hcd 0000:00:1d.1: irq 9, io base 0x00001820
[   18.382972] usb usb2: configuration #1 chosen from 1 choice
[   18.389918] hub 2-0:1.0: USB hub found
[   18.396769] hub 2-0:1.0: 2 ports detected
[   18.508091] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
[   18.514993] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
[   18.522196] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   18.522204] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   18.529129] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[   18.536053] uhci_hcd 0000:00:1d.2: irq 9, io base 0x00001840
[   18.543061] usb usb3: configuration #1 chosen from 1 choice
[   18.549987] hub 3-0:1.0: USB hub found
[   18.556835] hub 3-0:1.0: 2 ports detected
[   18.669785] PCI: Enabling device 0000:00:1f.5 (0000 -> 0001)
[   18.678203] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
[   18.684999] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
[   18.691910] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[   18.782185] usb 2-1: new low speed USB device using uhci_hcd and address 2
[   18.967436] usb 2-1: configuration #1 chosen from 1 choice
[   19.061656] hw_random hardware driver 1.0.0 loaded
[   19.217866] usb 3-1: new full speed USB device using uhci_hcd and address 2
[   19.265818] intel8x0_measure_ac97_clock: measured 55491 usecs
[   19.272935] intel8x0: clocking to 48000
[   19.402275] usb 3-1: configuration #1 chosen from 1 choice
[   19.644085] e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
[   19.721917] input: Logitech USB Mouse as /class/input/input1
[   19.729407] input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.1-1
[   19.736752] usbcore: registered new driver usbhid
[   19.743975] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[   20.150646] e100: Copyright(c) 1999-2005 Intel Corporation
[   20.158073] acpi_bus-0201 [01] bus_set_power         : Device is not power manageable
[   20.167022] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9
[   20.174308] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 9 (level, low) -> IRQ 9
[   20.203916] e100: eth0: e100_probe: addr 0xd0204000, irq 9, MAC addr 08:00:46:26:50:59
[   20.318740] ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKF] -> GSI 9 (level, low) -> IRQ 9
[   20.326185] Yenta: CardBus bridge found at 0000:02:05.0 [104d:80e7]
[   20.366384] SCSI subsystem initialized
[   20.386600] Initializing USB Mass Storage driver...
[   20.395040] scsi0 : SCSI emulation for USB Mass Storage devices
[   20.402616] usb-storage: device found at 2
[   20.402620] usb-storage: waiting for device to settle before scanning
[   20.402638] usbcore: registered new driver usb-storage
[   20.410002] USB Mass Storage support registered.
[   20.442816] Yenta: ISA IRQ mask 0x0cb8, PCI irq 9
[   20.450162] Socket status: 30000006
[   20.457470] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
[   20.464947] cs: IO port probe 0x4000-0x4fff: clean.
[   20.472668] pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
[   20.480039] pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x23ffffff
[   20.491777] ACPI: PCI Interrupt 0000:02:05.1[B] -> Link [LNKG] -> GSI 9 (level, low) -> IRQ 9
[   20.499356] Yenta: CardBus bridge found at 0000:02:05.1 [104d:80e7]
[   20.591299] Yenta: ISA IRQ mask 0x0cb8, PCI irq 9
[   20.598762] Socket status: 30000006
[   20.606081] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
[   20.613455] cs: IO port probe 0x4000-0x4fff: clean.
[   20.621547] pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
[   20.628965] pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x23ffffff
[   20.734449]   Vendor: Sony      Model: MSC-U02           Rev: 1.00
[   20.742514]   Type:   Direct-Access                      ANSI SCSI revision: 00
[   20.756973] usb-storage: device scan complete
[   20.782320] SCSI device sda: 7904 512-byte hdwr sectors (4 MB)
[   20.790561] sda: Write Protect is off
[   20.800389] sda: Mode Sense: 00 6a 10 00
[   20.800396] sda: assuming drive cache: write through
[   20.816778] SCSI device sda: 7904 512-byte hdwr sectors (4 MB)
[   20.853999] sda: Write Protect is off
[   20.861556] sda: Mode Sense: 00 6a 10 00
[   20.861561] sda: assuming drive cache: write through
[   20.869093]  sda: sda1
[   20.882927] sd 0:0:0:0: Attached scsi removable disk sda
[   21.162635] Adding 248996k swap on /dev/hda2.  Priority:-1 extents:1 across:248996k
[   21.389737] input: PC Speaker as /class/input/input2
[   21.490267] sonypi: Sony Programmable I/O Controller Driver v1.26.
[   21.502423] sonypi: detected type2 model, verbose = 0, fnkeyinit = off, camera = off, compat = off, mask = 0xffffffff, useinput = on, acpi = on
[   21.515559] sonypi: enabled at irq=11, port1=0x1080, port2=0x1084
[   21.522146] sonypi: device allocated minor is 63
[   21.543452] input: Sony Vaio Jogdial as /class/input/input3
[   21.583406] input: Sony Vaio Keys as /class/input/input4
[   21.639976] tun: Universal TUN/TAP device driver, 1.6
[   21.646600] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   21.674601] ACPI Sony Notebook Control Driver v0.2 successfully installed
[   21.700436] Real Time Clock Driver v1.12ac
[   21.746219] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2548b1, caps: 0x804753/0x0
[   21.761542] input: SynPS/2 Synaptics TouchPad as /class/input/input5
[   21.788856] do_settimeofday() was called!
[   21.807042] do_settimeofday() was called!
[   21.983237] ReiserFS: hda3: found reiserfs format "3.6" with standard journal
[   22.003447] ReiserFS: hda3: using ordered data mode
[   22.009893] ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   22.024781] ReiserFS: hda3: checking transaction log (hda3)
[   22.031922] ReiserFS: hda3: Using r5 hash to sort names
[   22.061283] SGI XFS with ACLs, security attributes, no debug enabled
[   22.086044] XFS mounting filesystem hda6
[   22.096956] Ending clean XFS mount for filesystem: hda6
[   22.767135] do_settimeofday() was called!
[   32.135988] TSC: Marked unstable
[   32.142337]  <c0103c43> show_trace+0x13/0x20   <c0103c6e> dump_stack+0x1e/0x20
[   32.148756]  <c0108c17> mark_tsc_unstable+0x27/0x40   <c010908b> time_cpufreq_notifier+0x19b/0x1b0
[   32.161524]  <c01290fd> notifier_call_chain+0x2d/0x50   <c029d35c> cpufreq_notify_transition+0x13c/0x170
[   32.174549]  <c010d940> speedstep_target+0xd0/0xe0   <c029cf57> __cpufreq_driver_target+0x77/0x80
[   32.181252]  <d12035ee> do_dbs_timer+0x13e/0x200 [cpufreq_ondemand]   <c012c49a> run_workqueue+0x9a/0x140
[   32.194713]  <c012c737> worker_thread+0x107/0x140   <c012fd89> kthread+0xd9/0xe0
[   32.201583]  <c0101005> kernel_thread_helper+0x5/0x10  
[   43.612000] Time: acpi_pm clocksource has been installed.
[   45.876000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   46.128000] ip_conntrack version 2.4 (2044 buckets, 16352 max) - 232 bytes per conntrack
[   46.504000] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[   48.336000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).