From: Dominik Karall <dominik.karall@gmx.net>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.6.17-mm2 (NULL pointer dereference)
Date: Sun, 25 Jun 2006 20:11:36 +0200 [thread overview]
Message-ID: <200606252011.36602.dominik.karall@gmx.net> (raw)
In-Reply-To: <20060625101840.4f90da21.akpm@osdl.org>
On Sunday, 25. June 2006 19:18, Andrew Morton wrote:
> On Sun, 25 Jun 2006 18:25:26 +0200
>
> Dominik Karall <dominik.karall@gmx.net> wrote:
> > On Saturday, 24. June 2006 15:19, Andrew Morton wrote:
> > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2
> > >.6.1 7/2.6.17-mm2/
> >
> > hi!
> >
> > I got this error with 2.6.17-mm1 too, I took a picture with my
> > mobile, hope it's readable:
> > http://stud4.tuwien.ac.at/~e0227135/kernel/060625_180209.jpg
>
> hm, that's new. We do seem to be getting a few sysfs/kobject
> crashes in there.
>
> Do you actually have the bttv hardware present?
Yes, the bttv hardware is present. You can find my lspci output and
the .config file which I used for that kernel at:
http://stud4.tuwien.ac.at/~e0227135/kernel/
hth,
dominik
next prev parent reply other threads:[~2006-06-25 18:11 UTC|newest]
Thread overview: 80+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-06-24 13:19 2.6.17-mm2 Andrew Morton
2006-06-24 15:53 ` 2.6.17-mm2 Rafael J. Wysocki
2006-06-24 17:20 ` 2.6.17-mm2 Dave Jones
2006-06-24 21:34 ` 2.6.17-mm2 Andrew Morton
2006-06-25 8:51 ` 2.6.17-mm2 Rafael J. Wysocki
2006-06-25 10:22 ` 2.6.17-mm2 Andrew Morton
2006-06-25 15:16 ` 2.6.17-mm2 Andrew Morton
2006-06-25 18:23 ` 2.6.17-mm2 Sam Ravnborg
2006-06-25 18:40 ` 2.6.17-mm2 Andrew Morton
2006-06-25 21:21 ` 2.6.17-mm2 Sam Ravnborg
2006-06-30 7:38 ` 2.6.17-mm2 Randy.Dunlap
2006-07-02 10:11 ` 2.6.17-mm2 Russell King
2006-07-02 18:42 ` 2.6.17-mm2 Randy.Dunlap
2006-07-02 18:47 ` 2.6.17-mm2 Arjan van de Ven
2006-07-02 18:47 ` 2.6.17-mm2 Sam Ravnborg
2006-07-03 5:50 ` 2.6.17-mm2 Randy.Dunlap
2006-07-03 13:49 ` 2.6.17-mm2 Russell King
2006-06-25 19:19 ` 2.6.17-mm2 Rafael J. Wysocki
2006-06-26 20:13 ` 2.6.17-mm2 Chandra Seetharaman
2006-06-24 19:41 ` 2.6.17-mm2 Dominik Karall
2006-06-24 21:43 ` 2.6.17-mm2 Andrew Morton
2006-06-25 6:06 ` 2.6.17-mm2 Reuben Farrelly
2006-06-25 9:37 ` 2.6.17-mm2 Barry K. Nathan
2006-06-25 10:29 ` 2.6.17-mm2 Reuben Farrelly
2006-06-25 11:19 ` 2.6.17-mm2 Michal Piotrowski
2006-06-25 11:40 ` 2.6.17-mm2 Andrew Morton
2006-06-25 12:18 ` 2.6.17-mm2 Michal Piotrowski
2006-06-25 16:25 ` 2.6.17-mm2 (NULL pointer dereference) Dominik Karall
2006-06-25 17:18 ` Andrew Morton
2006-06-25 18:11 ` Dominik Karall [this message]
2006-06-25 16:47 ` 2.6.17-mm2: no QLA3YYY_NAPI help text Adrian Bunk
2006-06-25 19:32 ` 2.6.17-mm2: BLK_CPQ_CISS_DA=m error Adrian Bunk
2006-06-26 0:41 ` Vivek Goyal
2006-06-25 23:13 ` [-mm patch] make drivers/scsi/pata_it821x.c:it821x_passthru_dev_select() static Adrian Bunk
2006-06-25 23:27 ` Alan Cox
2006-06-27 1:03 ` Jeff Garzik
2006-06-25 23:13 ` [-mm patch] fs/cifs/cifsproto.h: remove #ifdef around small_smb_init_no_tc() prototype Adrian Bunk
2006-06-26 4:05 ` Steven French
2006-06-26 15:17 ` [-mm patch] drivers/scsi/arcmsr/: cleanups Adrian Bunk
2006-06-26 20:27 ` [-mm patch] drivers/md/raid5.c: remove an unused variable Adrian Bunk
2006-06-26 21:41 ` 2.6.17-mm2 hrtimer code wedges at boot? Valdis.Kletnieks
2006-06-26 22:50 ` Valdis.Kletnieks
2006-06-26 23:02 ` john stultz
2006-06-26 23:27 ` Thomas Gleixner
2006-06-27 2:12 ` Valdis.Kletnieks
2006-06-27 5:54 ` Thomas Gleixner
2006-06-27 10:16 ` Roman Zippel
2006-06-27 16:43 ` Valdis.Kletnieks
2006-06-27 17:10 ` Roman Zippel
2006-06-27 17:23 ` Roman Zippel
2006-06-27 19:07 ` Valdis.Kletnieks
2006-06-28 0:07 ` john stultz
2006-06-28 10:35 ` Roman Zippel
2006-06-28 11:44 ` Roman Zippel
2006-06-29 23:07 ` Valdis.Kletnieks
2006-06-30 19:26 ` john stultz
2006-06-30 21:04 ` Valdis.Kletnieks
2006-07-03 1:13 ` Roman Zippel
2006-07-03 1:56 ` Daniel Walker
2006-07-03 2:20 ` Valdis.Kletnieks
2006-07-03 20:08 ` john stultz
2006-07-03 19:59 ` john stultz
2006-07-04 22:21 ` Valdis.Kletnieks
2006-07-05 4:29 ` Valdis.Kletnieks
2006-07-06 0:37 ` Roman Zippel
2006-07-06 0:56 ` john stultz
2006-07-06 6:38 ` Valdis.Kletnieks
2006-07-06 0:51 ` john stultz
2006-07-06 1:12 ` john stultz
2006-07-06 5:43 ` john stultz
2006-07-06 20:33 ` Roman Zippel
2006-07-06 22:05 ` john stultz
2006-07-07 23:16 ` Roman Zippel
2006-07-08 20:02 ` [PATCH] adjust clock for lost ticks Roman Zippel
2006-07-09 21:25 ` john stultz
2006-06-28 23:41 ` 2.6.17-mm2 hrtimer code wedges at boot? john stultz
2006-06-29 11:24 ` Roman Zippel
2006-06-28 16:54 ` [-mm patch] include/asm-i386/acpi.h should #include <asm/processor.h> Adrian Bunk
2006-06-28 16:54 ` [-mm patch] fix sgivwfb compile Adrian Bunk
2006-06-28 16:54 ` [-mm patch] arch/i386/mach-visws/setup.c: remove dummy function calls Adrian Bunk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200606252011.36602.dominik.karall@gmx.net \
--to=dominik.karall@gmx.net \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).