From: Ingo Molnar <mingo@elte.hu>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-kernel@vger.kernel.org,
Rusty Russell <rusty@rustcorp.com.au>,
Zachary Amsden <zach@vmware.com>,
Arjan van de Ven <arjan@infradead.org>,
Adrian Bunk <bunk@stusta.de>
Subject: [patch] paravirt: isolate module ops
Date: Sat, 6 Jan 2007 01:07:15 +0100 [thread overview]
Message-ID: <20070106000715.GA6688@elte.hu> (raw)
Subject: [patch] paravirt: isolate module ops
From: Ingo Molnar <mingo@elte.hu>
only export those operations to modules that have been available to them
historically: irq disable/enable, io-delay, udelay, etc.
this isolates that functionality from other paravirtualization
functionality that modules have no business messing with.
boot and build tested with CONFIG_PARAVIRT=y.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
arch/i386/kernel/paravirt.c | 41 +++++++++++++++++++++++++++
include/asm-i386/delay.h | 4 +-
include/asm-i386/paravirt.h | 65 ++++++++++++++++++++++----------------------
3 files changed, 75 insertions(+), 35 deletions(-)
Index: linux/arch/i386/kernel/paravirt.c
===================================================================
--- linux.orig/arch/i386/kernel/paravirt.c
+++ linux/arch/i386/kernel/paravirt.c
@@ -492,6 +492,7 @@ struct paravirt_ops paravirt_ops = {
.patch = native_patch,
.banner = default_banner,
+
.arch_setup = native_nop,
.memory_setup = machine_specific_memory_setup,
.get_wallclock = native_get_wallclock,
@@ -566,4 +567,42 @@ struct paravirt_ops paravirt_ops = {
.irq_enable_sysexit = native_irq_enable_sysexit,
.iret = native_iret,
};
-EXPORT_SYMBOL(paravirt_ops);
+
+/*
+ * These are exported to modules:
+ */
+struct paravirt_ops paravirt_mod_ops = {
+ .name = "bare hardware",
+ .paravirt_enabled = 0,
+ .kernel_rpl = 0,
+
+ .patch = native_patch,
+ .banner = default_banner,
+
+ .save_fl = native_save_fl,
+ .restore_fl = native_restore_fl,
+ .irq_disable = native_irq_disable,
+ .irq_enable = native_irq_enable,
+
+ .cpuid = native_cpuid,
+
+ .read_msr = native_read_msr,
+ .write_msr = native_write_msr,
+
+ .read_tsc = native_read_tsc,
+ .read_pmc = native_read_pmc,
+
+ .io_delay = native_io_delay,
+ .const_udelay = __const_udelay,
+
+#ifdef CONFIG_X86_LOCAL_APIC
+ .apic_write = native_apic_write,
+ .apic_write_atomic = native_apic_write_atomic,
+ .apic_read = native_apic_read,
+#endif
+
+ .flush_tlb_user = native_flush_tlb,
+ .flush_tlb_kernel = native_flush_tlb_global,
+ .flush_tlb_single = native_flush_tlb_single,
+};
+EXPORT_SYMBOL(paravirt_mod_ops);
Index: linux/include/asm-i386/delay.h
===================================================================
--- linux.orig/include/asm-i386/delay.h
+++ linux/include/asm-i386/delay.h
@@ -17,9 +17,9 @@ extern void __const_udelay(unsigned long
extern void __delay(unsigned long loops);
#if defined(CONFIG_PARAVIRT) && !defined(USE_REAL_TIME_DELAY)
-#define udelay(n) paravirt_ops.const_udelay((n) * 0x10c7ul)
+#define udelay(n) paravirt_mod_ops.const_udelay((n) * 0x10c7ul)
-#define ndelay(n) paravirt_ops.const_udelay((n) * 5ul)
+#define ndelay(n) paravirt_mod_ops.const_udelay((n) * 5ul)
#else /* !PARAVIRT || USE_REAL_TIME_DELAY */
Index: linux/include/asm-i386/paravirt.h
===================================================================
--- linux.orig/include/asm-i386/paravirt.h
+++ linux/include/asm-i386/paravirt.h
@@ -151,8 +151,9 @@ struct paravirt_ops
__attribute__((__section__(".paravirtprobe"))) = fn
extern struct paravirt_ops paravirt_ops;
+extern struct paravirt_ops paravirt_mod_ops;
-#define paravirt_enabled() (paravirt_ops.paravirt_enabled)
+#define paravirt_enabled() (paravirt_mod_ops.paravirt_enabled)
static inline void load_esp0(struct tss_struct *tss,
struct thread_struct *thread)
@@ -180,7 +181,7 @@ static inline void do_time_init(void)
static inline void __cpuid(unsigned int *eax, unsigned int *ebx,
unsigned int *ecx, unsigned int *edx)
{
- paravirt_ops.cpuid(eax, ebx, ecx, edx);
+ paravirt_mod_ops.cpuid(eax, ebx, ecx, edx);
}
/*
@@ -219,52 +220,52 @@ static inline void halt(void)
#define rdmsr(msr,val1,val2) do { \
int _err; \
- u64 _l = paravirt_ops.read_msr(msr,&_err); \
+ u64 _l = paravirt_mod_ops.read_msr(msr,&_err); \
val1 = (u32)_l; \
val2 = _l >> 32; \
} while(0)
#define wrmsr(msr,val1,val2) do { \
u64 _l = ((u64)(val2) << 32) | (val1); \
- paravirt_ops.write_msr((msr), _l); \
+ paravirt_mod_ops.write_msr((msr), _l); \
} while(0)
#define rdmsrl(msr,val) do { \
int _err; \
- val = paravirt_ops.read_msr((msr),&_err); \
+ val = paravirt_mod_ops.read_msr((msr),&_err); \
} while(0)
-#define wrmsrl(msr,val) (paravirt_ops.write_msr((msr),(val)))
+#define wrmsrl(msr,val) (paravirt_mod_ops.write_msr((msr),(val)))
#define wrmsr_safe(msr,a,b) ({ \
u64 _l = ((u64)(b) << 32) | (a); \
- paravirt_ops.write_msr((msr),_l); \
+ paravirt_mod_ops.write_msr((msr),_l); \
})
/* rdmsr with exception handling */
#define rdmsr_safe(msr,a,b) ({ \
int _err; \
- u64 _l = paravirt_ops.read_msr(msr,&_err); \
+ u64 _l = paravirt_mod_ops.read_msr(msr,&_err); \
(*a) = (u32)_l; \
(*b) = _l >> 32; \
_err; })
#define rdtsc(low,high) do { \
- u64 _l = paravirt_ops.read_tsc(); \
+ u64 _l = paravirt_mod_ops.read_tsc(); \
low = (u32)_l; \
high = _l >> 32; \
} while(0)
#define rdtscl(low) do { \
- u64 _l = paravirt_ops.read_tsc(); \
+ u64 _l = paravirt_mod_ops.read_tsc(); \
low = (int)_l; \
} while(0)
-#define rdtscll(val) (val = paravirt_ops.read_tsc())
+#define rdtscll(val) (val = paravirt_mod_ops.read_tsc())
#define write_tsc(val1,val2) wrmsr(0x10, val1, val2)
#define rdpmc(counter,low,high) do { \
- u64 _l = paravirt_ops.read_pmc(); \
+ u64 _l = paravirt_mod_ops.read_pmc(); \
low = (u32)_l; \
high = _l >> 32; \
} while(0)
@@ -287,11 +288,11 @@ static inline void halt(void)
/* The paravirtualized I/O functions */
static inline void slow_down_io(void) {
- paravirt_ops.io_delay();
+ paravirt_mod_ops.io_delay();
#ifdef REALLY_SLOW_IO
- paravirt_ops.io_delay();
- paravirt_ops.io_delay();
- paravirt_ops.io_delay();
+ paravirt_mod_ops.io_delay();
+ paravirt_mod_ops.io_delay();
+ paravirt_mod_ops.io_delay();
#endif
}
@@ -301,24 +302,24 @@ static inline void slow_down_io(void) {
*/
static inline void apic_write(unsigned long reg, unsigned long v)
{
- paravirt_ops.apic_write(reg,v);
+ paravirt_mod_ops.apic_write(reg,v);
}
static inline void apic_write_atomic(unsigned long reg, unsigned long v)
{
- paravirt_ops.apic_write_atomic(reg,v);
+ paravirt_mod_ops.apic_write_atomic(reg,v);
}
static inline unsigned long apic_read(unsigned long reg)
{
- return paravirt_ops.apic_read(reg);
+ return paravirt_mod_ops.apic_read(reg);
}
#endif
-#define __flush_tlb() paravirt_ops.flush_tlb_user()
-#define __flush_tlb_global() paravirt_ops.flush_tlb_kernel()
-#define __flush_tlb_single(addr) paravirt_ops.flush_tlb_single(addr)
+#define __flush_tlb() paravirt_mod_ops.flush_tlb_user()
+#define __flush_tlb_global() paravirt_mod_ops.flush_tlb_kernel()
+#define __flush_tlb_single(addr) paravirt_mod_ops.flush_tlb_single(addr)
static inline void set_pte(pte_t *ptep, pte_t pteval)
{
@@ -397,7 +398,7 @@ static inline unsigned long __raw_local_
"call *%1;"
"popl %%edx; popl %%ecx",
PARAVIRT_SAVE_FLAGS, CLBR_NONE)
- : "=a"(f): "m"(paravirt_ops.save_fl)
+ : "=a"(f): "m"(paravirt_mod_ops.save_fl)
: "memory", "cc");
return f;
}
@@ -408,7 +409,7 @@ static inline void raw_local_irq_restore
"call *%1;"
"popl %%edx; popl %%ecx",
PARAVIRT_RESTORE_FLAGS, CLBR_EAX)
- : "=a"(f) : "m" (paravirt_ops.restore_fl), "0"(f)
+ : "=a"(f) : "m" (paravirt_mod_ops.restore_fl), "0"(f)
: "memory", "cc");
}
@@ -418,7 +419,7 @@ static inline void raw_local_irq_disable
"call *%0;"
"popl %%edx; popl %%ecx",
PARAVIRT_IRQ_DISABLE, CLBR_EAX)
- : : "m" (paravirt_ops.irq_disable)
+ : : "m" (paravirt_mod_ops.irq_disable)
: "memory", "eax", "cc");
}
@@ -428,7 +429,7 @@ static inline void raw_local_irq_enable(
"call *%0;"
"popl %%edx; popl %%ecx",
PARAVIRT_IRQ_ENABLE, CLBR_EAX)
- : : "m" (paravirt_ops.irq_enable)
+ : : "m" (paravirt_mod_ops.irq_enable)
: "memory", "eax", "cc");
}
@@ -443,19 +444,19 @@ static inline unsigned long __raw_local_
PARAVIRT_SAVE_FLAGS_IRQ_DISABLE,
CLBR_NONE)
: "=a"(f)
- : "m" (paravirt_ops.save_fl),
- "m" (paravirt_ops.irq_disable)
+ : "m" (paravirt_mod_ops.save_fl),
+ "m" (paravirt_mod_ops.irq_disable)
: "memory", "cc");
return f;
}
#define CLI_STRING paravirt_alt("pushl %%ecx; pushl %%edx;" \
- "call *paravirt_ops+%c[irq_disable];" \
+ "call *paravirt_mod_ops+%c[irq_disable];" \
"popl %%edx; popl %%ecx", \
PARAVIRT_IRQ_DISABLE, CLBR_EAX)
#define STI_STRING paravirt_alt("pushl %%ecx; pushl %%edx;" \
- "call *paravirt_ops+%c[irq_enable];" \
+ "call *paravirt_mod_ops+%c[irq_enable];" \
"popl %%edx; popl %%ecx", \
PARAVIRT_IRQ_ENABLE, CLBR_EAX)
#define CLI_STI_CLOBBERS , "%eax"
@@ -484,13 +485,13 @@ static inline unsigned long __raw_local_
#define DISABLE_INTERRUPTS(clobbers) \
PARA_PATCH(PARAVIRT_IRQ_DISABLE, clobbers, \
pushl %ecx; pushl %edx; \
- call *paravirt_ops+PARAVIRT_irq_disable; \
+ call *paravirt_mod_ops+PARAVIRT_irq_disable; \
popl %edx; popl %ecx) \
#define ENABLE_INTERRUPTS(clobbers) \
PARA_PATCH(PARAVIRT_IRQ_ENABLE, clobbers, \
pushl %ecx; pushl %edx; \
- call *%cs:paravirt_ops+PARAVIRT_irq_enable; \
+ call *%cs:paravirt_mod_ops+PARAVIRT_irq_enable; \
popl %edx; popl %ecx)
#define ENABLE_INTERRUPTS_SYSEXIT \
next reply other threads:[~2007-01-06 0:11 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-01-06 0:07 Ingo Molnar [this message]
2007-01-06 0:31 ` [patch] paravirt: isolate module ops Zachary Amsden
2007-01-06 6:25 ` Rusty Russell
2007-01-06 7:08 ` Ingo Molnar
2007-01-06 7:12 ` Ingo Molnar
2007-01-06 17:42 ` Rusty Russell
2007-01-06 18:32 ` Ingo Molnar
2007-01-06 20:55 ` Zachary Amsden
2007-01-07 1:09 ` Rusty Russell
2007-01-07 14:07 ` Zachary Amsden
2007-01-06 7:14 ` Ingo Molnar
2007-01-06 9:50 ` Zachary Amsden
2007-01-06 10:52 ` Arjan van de Ven
2007-01-06 16:18 ` Rusty Russell
2007-01-06 19:31 ` Christoph Hellwig
2007-01-07 5:35 ` Rusty Russell
2007-01-07 18:39 ` Christoph Hellwig
2007-01-07 18:43 ` Ingo Molnar
2007-01-08 0:54 ` Dave Airlie
2007-01-06 1:02 ` Zachary Amsden
2007-01-06 2:07 ` Arjan van de Ven
2007-01-06 4:41 ` Zachary Amsden
2007-01-06 5:34 ` Rusty Russell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070106000715.GA6688@elte.hu \
--to=mingo@elte.hu \
--cc=akpm@osdl.org \
--cc=arjan@infradead.org \
--cc=bunk@stusta.de \
--cc=linux-kernel@vger.kernel.org \
--cc=rusty@rustcorp.com.au \
--cc=zach@vmware.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).