From: Frank van Maarseveen <frankvm@frankvm.com>
To: linux-kernel@vger.kernel.org
Subject: 2.6.20*: PATA DMA timeout, hangs (2)
Date: Mon, 12 Mar 2007 12:24:14 +0100 [thread overview]
Message-ID: <20070312112414.GA12265@janus> (raw)
In-Reply-To: <20070312085447.GA10955@janus>
On Mon, Mar 12, 2007 at 09:54:47AM +0100, Frank van Maarseveen wrote:
>
> 2.6.19 is ok, 2.6.20.[12] hangs from the moment DMA is turned on (hdparm
> -d 1 /dev/hda):
>
> hda: dma_timer_expiry: dma status == 0x20
> hda: DMA timeout retry
> hda: timeout waiting for DMA
> hda: status error: status=0x58 {
> DriveReady
> SeekComplete
> DataRequest
> }
I have a totally different PATA based system (P4 HT) with similar symptoms
except that it seem to recover by switching DMA off during boot after
5 errors:
hda: dma_timer_expiry: dma status == 0x20
hda: DMA timeout retry
hda: timeout waiting for DMA
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hda: drive not ready for command
hda: dma_timer_expiry: dma status == 0x20
hda: DMA timeout retry
hda: timeout waiting for DMA
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hda: drive not ready for command
hda: dma_timer_expiry: dma status == 0x20
hda: DMA timeout retry
hda: timeout waiting for DMA
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hda: drive not ready for command
hda: dma_timer_expiry: dma status == 0x20
hda: DMA timeout retry
hda: timeout waiting for DMA
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hda: drive not ready for command
hda: dma_timer_expiry: dma status == 0x20
hda: DMA timeout retry
hda: timeout waiting for DMA
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hda: drive not ready for command
So in this case it doesn't hang but is not really usable either.
lspci:
00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
00:01.0 PCI bridge: Intel Corporation 82865G/PE/P PCI to AGP Controller (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)
02:00.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet Controller (rev 05)
This system has SATA but there's only one PATA disk
--
Frank
next prev parent reply other threads:[~2007-03-12 11:24 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-03-12 8:54 2.6.20*: PATA DMA timeout, hangs Frank van Maarseveen
2007-03-12 11:24 ` Frank van Maarseveen [this message]
2007-03-12 12:07 ` 2.6.20*: PATA DMA timeout, hangs (2) Alistair John Strachan
2007-03-12 13:25 ` Frank van Maarseveen
2007-03-12 13:52 ` Alistair John Strachan
2007-03-19 8:22 ` Tejun Heo
2007-03-12 12:21 ` Bartlomiej Zolnierkiewicz
2007-03-12 12:40 ` Frank van Maarseveen
2007-03-12 20:40 ` Bartlomiej Zolnierkiewicz
2007-03-13 9:19 ` Frank van Maarseveen
2007-03-13 11:04 ` Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070312112414.GA12265@janus \
--to=frankvm@frankvm.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).