* CONFIG_X86_ES7000=y, CONFIG_X86_GENERICARCH=n, CONFIG_ACPI=y build broken
@ 2007-06-12 19:13 Roland Dreier
2007-06-13 17:37 ` Vivek Goyal
0 siblings, 1 reply; 9+ messages in thread
From: Roland Dreier @ 2007-06-12 19:13 UTC (permalink / raw)
To: linux-kernel, Natalie.Protasevich, Vivek Goyal; +Cc: akpm
(sending to Vivek since he seems to be one of the last people to touch
this code)
For some strange reason I found myself compiling a kernel with
CONFIG_X86_ES7000 and CONFIG_ACPI set and CONFIG_X86_GENERICARCH not
set. It died with
arch/i386/kernel/built-in.o: In function `acpi_parse_madt':
boot.c:(.init.text+0x68b7): undefined reference to `acpi_madt_oem_check'
arch/i386/kernel/built-in.o: In function `get_smp_config':
(.init.text+0x9f98): undefined reference to `mps_oem_check'
arch/i386/kernel/built-in.o: In function `connect_bsp_APIC':
(.init.text+0xa340): undefined reference to `enable_apic_mode'
arch/i386/kernel/built-in.o: In function `connect_bsp_APIC':
(.init.text+0xa370): undefined reference to `enable_apic_mode'
this seems to be because eg acpi_madt_oem_check() and mps_oem_check()
are defined in arch/i386/mach-generic/es7000.c, but arch/i386/Makefile
only goes into mach-generic if CONFIG_X86_GENERICARCH is set.
I didn't track down why enable_apic_mode is broken yet.
No patch because I don't understand how this subarch stuff is supposed
to build :(
- R.
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: CONFIG_X86_ES7000=y, CONFIG_X86_GENERICARCH=n, CONFIG_ACPI=y build broken
2007-06-12 19:13 CONFIG_X86_ES7000=y, CONFIG_X86_GENERICARCH=n, CONFIG_ACPI=y build broken Roland Dreier
@ 2007-06-13 17:37 ` Vivek Goyal
2007-06-13 20:39 ` Roland Dreier
0 siblings, 1 reply; 9+ messages in thread
From: Vivek Goyal @ 2007-06-13 17:37 UTC (permalink / raw)
To: Roland Dreier; +Cc: linux-kernel, Natalie.Protasevich, akpm
On Tue, Jun 12, 2007 at 12:13:50PM -0700, Roland Dreier wrote:
> (sending to Vivek since he seems to be one of the last people to touch
> this code)
>
> For some strange reason I found myself compiling a kernel with
> CONFIG_X86_ES7000 and CONFIG_ACPI set and CONFIG_X86_GENERICARCH not
> set. It died with
>
> arch/i386/kernel/built-in.o: In function `acpi_parse_madt':
> boot.c:(.init.text+0x68b7): undefined reference to `acpi_madt_oem_check'
> arch/i386/kernel/built-in.o: In function `get_smp_config':
> (.init.text+0x9f98): undefined reference to `mps_oem_check'
> arch/i386/kernel/built-in.o: In function `connect_bsp_APIC':
> (.init.text+0xa340): undefined reference to `enable_apic_mode'
> arch/i386/kernel/built-in.o: In function `connect_bsp_APIC':
> (.init.text+0xa370): undefined reference to `enable_apic_mode'
>
> this seems to be because eg acpi_madt_oem_check() and mps_oem_check()
> are defined in arch/i386/mach-generic/es7000.c, but arch/i386/Makefile
> only goes into mach-generic if CONFIG_X86_GENERICARCH is set.
> I didn't track down why enable_apic_mode is broken yet.
>
Hi Roland,
Can you please try the attached patch? I have compiled it with CONFIG_ES7000=y
and CONFIG_X86_GENERICARCH=n. But don't have any ES7000 machine to test it.
I have compiled and booted the kernel on my machine with CONFIG_X86_GENERICARCH=y.
Subarch build procedure is not straightforward and this patch adds to the
misery. Please suggest if there is a better way of handling things.
o Commit 1833d6bc72893265f22addd79cf52e6987496e0f broke the build if
compiled with CONFIG_ES7000=y and CONFIG_X86_GENERICARCH=n
o Fix the build issue. Provided the definitions of missing functions.
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
---
linux-2.6.22-rc4-git4-vivek/arch/i386/mach-es7000/es7000plat.c | 48 ++++++++++
linux-2.6.22-rc4-git4-vivek/include/asm-i386/mach-es7000/mach_apic.h | 4
linux-2.6.22-rc4-git4-vivek/include/asm-i386/mach-es7000/mach_mpparse.h | 6 +
3 files changed, 58 insertions(+)
diff -puN arch/i386/mach-es7000/es7000plat.c~i386-es7000-build-breakage-fix arch/i386/mach-es7000/es7000plat.c
--- linux-2.6.22-rc4-git4/arch/i386/mach-es7000/es7000plat.c~i386-es7000-build-breakage-fix 2007-06-13 22:52:14.000000000 +0530
+++ linux-2.6.22-rc4-git4-vivek/arch/i386/mach-es7000/es7000plat.c 2007-06-13 22:53:03.000000000 +0530
@@ -40,6 +40,7 @@
#include <asm/smp.h>
#include <asm/apicdef.h>
#include "es7000.h"
+#include <mach_mpparse.h>
/*
* ES7000 Globals
@@ -174,6 +175,53 @@ find_unisys_acpi_oem_table(unsigned long
}
#endif
+/*
+ * This file also gets compiled if CONFIG_X86_GENERICARCH is set. Generic
+ * arch already has got following function definitions (asm-generic/es7000.c)
+ * hence no need to define these for that case.
+ */
+#ifndef CONFIG_X86_GENERICARCH
+void es7000_sw_apic(void);
+void __init enable_apic_mode(void)
+{
+ es7000_sw_apic();
+ return;
+}
+
+__init int mps_oem_check(struct mp_config_table *mpc, char *oem,
+ char *productid)
+{
+ if (mpc->mpc_oemptr) {
+ struct mp_config_oemtable *oem_table =
+ (struct mp_config_oemtable *)mpc->mpc_oemptr;
+ if (!strncmp(oem, "UNISYS", 6))
+ return parse_unisys_oem((char *)oem_table);
+ }
+ return 0;
+}
+#ifdef CONFIG_ACPI
+/* Hook from generic ACPI tables.c */
+int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+ unsigned long oem_addr;
+ if (!find_unisys_acpi_oem_table(&oem_addr)) {
+ if (es7000_check_dsdt())
+ return parse_unisys_oem((char *)oem_addr);
+ else {
+ setup_unisys();
+ return 1;
+ }
+ }
+ return 0;
+}
+#else
+int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+ return 0;
+}
+#endif
+#endif /* COFIG_X86_GENERICARCH */
+
static void
es7000_spin(int n)
{
diff -puN include/asm-i386/mach-es7000/mach_apic.h~i386-es7000-build-breakage-fix include/asm-i386/mach-es7000/mach_apic.h
--- linux-2.6.22-rc4-git4/include/asm-i386/mach-es7000/mach_apic.h~i386-es7000-build-breakage-fix 2007-06-13 22:52:14.000000000 +0530
+++ linux-2.6.22-rc4-git4-vivek/include/asm-i386/mach-es7000/mach_apic.h 2007-06-13 22:52:14.000000000 +0530
@@ -73,6 +73,10 @@ static inline void init_apic_ldr(void)
apic_write_around(APIC_LDR, val);
}
+#ifndef CONFIG_X86_GENERICARCH
+extern void enable_apic_mode(void);
+#endif
+
extern int apic_version [MAX_APICS];
static inline void setup_apic_routing(void)
{
diff -puN include/asm-i386/mach-es7000/mach_mpparse.h~i386-es7000-build-breakage-fix include/asm-i386/mach-es7000/mach_mpparse.h
--- linux-2.6.22-rc4-git4/include/asm-i386/mach-es7000/mach_mpparse.h~i386-es7000-build-breakage-fix 2007-06-13 22:52:14.000000000 +0530
+++ linux-2.6.22-rc4-git4-vivek/include/asm-i386/mach-es7000/mach_mpparse.h 2007-06-13 22:52:14.000000000 +0530
@@ -18,6 +18,12 @@ extern int parse_unisys_oem (char *oempt
extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
extern void setup_unisys(void);
+#ifndef CONFIG_X86_GENERICARCH
+extern int acpi_madt_oem_check(char *oem_id, char *oem_table_id);
+extern int mps_oem_check(struct mp_config_table *mpc, char *oem,
+ char *productid);
+#endif
+
#ifdef CONFIG_ACPI
static inline int es7000_check_dsdt(void)
_
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: CONFIG_X86_ES7000=y, CONFIG_X86_GENERICARCH=n, CONFIG_ACPI=y build broken
2007-06-13 17:37 ` Vivek Goyal
@ 2007-06-13 20:39 ` Roland Dreier
2007-06-15 15:57 ` Vivek Goyal
0 siblings, 1 reply; 9+ messages in thread
From: Roland Dreier @ 2007-06-13 20:39 UTC (permalink / raw)
To: vgoyal; +Cc: linux-kernel, Natalie.Protasevich, akpm
> Can you please try the attached patch? I have compiled it with CONFIG_ES7000=y
> and CONFIG_X86_GENERICARCH=n. But don't have any ES7000 machine to test it.
I actually don't have anything remotely like ES7000 iether. I just
found the problem while tracking down another randconfig failure.
> Subarch build procedure is not straightforward and this patch adds to the
> misery. Please suggest if there is a better way of handling things.
> +/*
> + * This file also gets compiled if CONFIG_X86_GENERICARCH is set. Generic
> + * arch already has got following function definitions (asm-generic/es7000.c)
> + * hence no need to define these for that case.
> + */
> +#ifndef CONFIG_X86_GENERICARCH
Seems it would be cleaner to figure out some way to build es7000.c for
if CONFIG_X86_ES7000 is set? Or just move them here all the time?
> --- linux-2.6.22-rc4-git4/include/asm-i386/mach-es7000/mach_mpparse.h~i386-es7000-build-breakage-fix 2007-06-13 22:52:14.000000000 +0530
> +++ linux-2.6.22-rc4-git4-vivek/include/asm-i386/mach-es7000/mach_mpparse.h 2007-06-13 22:52:14.000000000 +0530
> @@ -18,6 +18,12 @@ extern int parse_unisys_oem (char *oempt
> extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
> extern void setup_unisys(void);
>
> +#ifndef CONFIG_X86_GENERICARCH
> +extern int acpi_madt_oem_check(char *oem_id, char *oem_table_id);
> +extern int mps_oem_check(struct mp_config_table *mpc, char *oem,
> + char *productid);
> +#endif
It seems that this #ifndef is not needed -- even if there is another
declaration of these functions that is visible, the signatures should
match so it should be OK.
- R.
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: CONFIG_X86_ES7000=y, CONFIG_X86_GENERICARCH=n, CONFIG_ACPI=y build broken
2007-06-13 20:39 ` Roland Dreier
@ 2007-06-15 15:57 ` Vivek Goyal
0 siblings, 0 replies; 9+ messages in thread
From: Vivek Goyal @ 2007-06-15 15:57 UTC (permalink / raw)
To: Roland Dreier; +Cc: linux-kernel, Natalie.Protasevich, akpm
On Wed, Jun 13, 2007 at 01:39:29PM -0700, Roland Dreier wrote:
> > Can you please try the attached patch? I have compiled it with CONFIG_ES7000=y
> > and CONFIG_X86_GENERICARCH=n. But don't have any ES7000 machine to test it.
>
> I actually don't have anything remotely like ES7000 iether. I just
> found the problem while tracking down another randconfig failure.
>
> > Subarch build procedure is not straightforward and this patch adds to the
> > misery. Please suggest if there is a better way of handling things.
>
> > +/*
> > + * This file also gets compiled if CONFIG_X86_GENERICARCH is set. Generic
> > + * arch already has got following function definitions (asm-generic/es7000.c)
> > + * hence no need to define these for that case.
> > + */
> > +#ifndef CONFIG_X86_GENERICARCH
>
> Seems it would be cleaner to figure out some way to build es7000.c for
> if CONFIG_X86_ES7000 is set? Or just move them here all the time?
>
> > --- linux-2.6.22-rc4-git4/include/asm-i386/mach-es7000/mach_mpparse.h~i386-es7000-build-breakage-fix 2007-06-13 22:52:14.000000000 +0530
> > +++ linux-2.6.22-rc4-git4-vivek/include/asm-i386/mach-es7000/mach_mpparse.h 2007-06-13 22:52:14.000000000 +0530
> > @@ -18,6 +18,12 @@ extern int parse_unisys_oem (char *oempt
> > extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
> > extern void setup_unisys(void);
> >
> > +#ifndef CONFIG_X86_GENERICARCH
> > +extern int acpi_madt_oem_check(char *oem_id, char *oem_table_id);
> > +extern int mps_oem_check(struct mp_config_table *mpc, char *oem,
> > + char *productid);
> > +#endif
>
> It seems that this #ifndef is not needed -- even if there is another
> declaration of these functions that is visible, the signatures should
> match so it should be OK.
>
Compiler does throw warning as one set of functions is static and
other is not.
arch/i386/mach-generic/es7000.c:37: warning: static declaration of 'mps_oem_check' follows non-static declaration
include/asm/mach-es7000/mach_mpparse.h:23: warning: previous declaration of 'mps_oem_check' was here
arch/i386/mach-generic/es7000.c:50: warning: static declaration of 'acpi_madt_oem_check' follows non-static declaration
include/asm/mach-es7000/mach_mpparse.h:21: warning: previous declaration of 'acpi_madt_oem_check' was here
Thanks
Vivek
^ permalink raw reply [flat|nested] 9+ messages in thread
* RE: CONFIG_X86_ES7000=y, CONFIG_X86_GENERICARCH=n, CONFIG_ACPI=y build broken
[not found] <19D0D50E9B1D0A40A9F0323DBFA04ACC023B0EBD@USRV-EXCH4.na.uis.unisys.com>
@ 2007-06-17 14:34 ` Natalie Protasevich
0 siblings, 0 replies; 9+ messages in thread
From: Natalie Protasevich @ 2007-06-17 14:34 UTC (permalink / raw)
To: vgoyal, linux-kernel, rdreier, akpm
> On Wed, Jun 13, 2007 at 01:39:29PM -0700, Roland Dreier wrote:
> > > Can you please try the attached patch? I have compiled it with
> CONFIG_ES7000=y
> > > and CONFIG_X86_GENERICARCH=n. But don't have any ES7000 machine to
> test it.
> >
> > I actually don't have anything remotely like ES7000 iether. I just
> > found the problem while tracking down another randconfig failure.
> >
> > > Subarch build procedure is not straightforward and this patch adds
> to the
> > > misery. Please suggest if there is a better way of handling things.
> >
> > > +/*
> > > + * This file also gets compiled if CONFIG_X86_GENERICARCH is set.
> Generic
> > > + * arch already has got following function definitions
> (asm-generic/es7000.c)
> > > + * hence no need to define these for that case.
> > > + */
> > > +#ifndef CONFIG_X86_GENERICARCH
> >
> > Seems it would be cleaner to figure out some way to build es7000.c for
> > if CONFIG_X86_ES7000 is set? Or just move them here all the time?
> >
> > > ---
> linux-2.6.22-rc4-git4/include/asm-i386/mach-es7000/mach_mpparse.h~i386-e
> s7000-build-breakage-fix 2007-06-13 22:52:14.000000000 +0530
> > > +++
> linux-2.6.22-rc4-git4-vivek/include/asm-i386/mach-es7000/mach_mpparse.h
> 2007-06-13 22:52:14.000000000 +0530
> > > @@ -18,6 +18,12 @@ extern int parse_unisys_oem (char *oempt
> > > extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
> > > extern void setup_unisys(void);
> > >
> > > +#ifndef CONFIG_X86_GENERICARCH
> > > +extern int acpi_madt_oem_check(char *oem_id, char *oem_table_id);
> > > +extern int mps_oem_check(struct mp_config_table *mpc, char *oem,
> > > + char *productid);
> > > +#endif
> >
> > It seems that this #ifndef is not needed -- even if there is another
> > declaration of these functions that is visible, the signatures should
> > match so it should be OK.
> >
>
> Compiler does throw warning as one set of functions is static and
> other is not.
>
> arch/i386/mach-generic/es7000.c:37: warning: static declaration of
> 'mps_oem_check' follows non-static declaration
> include/asm/mach-es7000/mach_mpparse.h:23: warning: previous declaration
> of 'mps_oem_check' was here
> arch/i386/mach-generic/es7000.c:50: warning: static declaration of
> 'acpi_madt_oem_check' follows non-static declaration
> include/asm/mach-es7000/mach_mpparse.h:21: warning: previous declaration
> of 'acpi_madt_oem_check' was here
Here is the patch that does work - but... I do have warnings that I
haven't noticed initially when compile for ES7000 case:
...
CC arch/i386/kernel/acpi/boot.o
include/asm-i386/mach-es7000/mach_mpparse.h:56: warning:
'mps_oem_check' defined but not used
CC arch/i386/kernel/mpparse.o
...
include/asm-i386/mach-es7000/mach_mpparse.h:35: warning:
'acpi_madt_oem_check' defined but not used
CC arch/i386/kernel/apic.o
...
CC arch/i386/kernel/nmi.o
I'm afraid I will have to do something ugly or ifdef to get rid of
this warning, so I guess I'd rather take yours, Vivec :) since it
compiles and runs cleanly.
Thanks!
--Natalie
---------------------------------------------------------------------------------
diff -Naur linux-2.6/arch/i386/mach-es7000/es7000plat.c
linux-2.6-mod/arch/i386/mach-es7000/es7000plat.c---
linux-2.6/arch/i386/mach-es7000/es7000plat.c 2007-06-12
21:16:15.000000000 -0700
+++ linux-2.6-mod/arch/i386/mach-es7000/es7000plat.c 2007-06-17
06:56:49.000000000 -0700
@@ -277,3 +277,11 @@
return;
}
}
+
+void __init
+enable_apic_mode(void)
+{
+ es7000_sw_apic();
+ return;
+}
+
diff -Naur linux-2.6/arch/i386/mach-generic/es7000.c
linux-2.6-mod/arch/i386/mach-generic/es7000.c
--- linux-2.6/arch/i386/mach-generic/es7000.c 2007-06-12
21:16:15.000000000 -0700
+++ linux-2.6-mod/arch/i386/mach-generic/es7000.c 2007-06-17
06:57:20.000000000 -0700
@@ -26,44 +26,6 @@
}
extern void es7000_sw_apic(void);
-static void __init enable_apic_mode(void)
-{
- es7000_sw_apic();
- return;
-}
-
-static __init int mps_oem_check(struct mp_config_table *mpc, char *oem,
- char *productid)
-{
- if (mpc->mpc_oemptr) {
- struct mp_config_oemtable *oem_table =
- (struct mp_config_oemtable *)mpc->mpc_oemptr;
- if (!strncmp(oem, "UNISYS", 6))
- return parse_unisys_oem((char *)oem_table);
- }
- return 0;
-}
-
-#ifdef CONFIG_ACPI
-/* Hook from generic ACPI tables.c */
-static int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
- unsigned long oem_addr;
- if (!find_unisys_acpi_oem_table(&oem_addr)) {
- if (es7000_check_dsdt())
- return parse_unisys_oem((char *)oem_addr);
- else {
- setup_unisys();
- return 1;
- }
- }
- return 0;
-}
-#else
-static int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
- return 0;
-}
-#endif
+extern void enable_apic_mode(void);
struct genapic apic_es7000 = APIC_INIT("es7000", probe_es7000); diff
-Naur linux-2.6/include/asm-i386/mach-es7000/mach_apic.h
linux-2.6-mod/include/asm-i386/mach-es7000/mach_apic.h
--- linux-2.6/include/asm-i386/mach-es7000/mach_apic.h 2007-06-12
21:16:18.000000000 -0700
+++ linux-2.6-mod/include/asm-i386/mach-es7000/mach_apic.h
2007-06-17 06:51:48.000000000 -0700
@@ -199,4 +199,6 @@
return cpuid_apic >> index_msb;
}
+extern void enable_apic_mode(void);
+
#endif /* __ASM_MACH_APIC_H */ diff -Naur
linux-2.6/include/asm-i386/mach-es7000/mach_mpparse.h
linux-2.6-mod/include/asm-i386/mach-es7000/mach_mpparse.h
--- linux-2.6/include/asm-i386/mach-es7000/mach_mpparse.h
2007-06-12 21:16:18.000000000 -0700
+++ linux-2.6-mod/include/asm-i386/mach-es7000/mach_mpparse.h
2007-06-17 06:54:54.000000000 -0700
@@ -29,6 +29,38 @@
return 1;
return 0;
}
+
+/* Hook from generic ACPI tables.c */
+static int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+ unsigned long oem_addr;
+ if (!find_unisys_acpi_oem_table(&oem_addr)) {
+ if (es7000_check_dsdt())
+ return parse_unisys_oem((char *)oem_addr);
+ else {
+ setup_unisys();
+ return 1;
+ }
+ }
#endif
+static __init int mps_oem_check(struct mp_config_table *mpc, char *oem,
+ char *productid)
+{
+ if (mpc->mpc_oemptr) {
+ struct mp_config_oemtable *oem_table =
+ (struct mp_config_oemtable *)mpc->mpc_oemptr;
+ if (!strncmp(oem, "UNISYS", 6))
+ return parse_unisys_oem((char *)oem_table);
+ }
+ return 0;
+}
+
#endif /* __ASM_MACH_MPPARSE_H */
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: CONFIG_X86_ES7000=y, CONFIG_X86_GENERICARCH=n, CONFIG_ACPI=y build broken
2007-06-15 15:29 ` Vivek Goyal
@ 2007-06-15 17:27 ` Natalie Protasevich
0 siblings, 0 replies; 9+ messages in thread
From: Natalie Protasevich @ 2007-06-15 17:27 UTC (permalink / raw)
To: vgoyal; +Cc: linux-kernel, rdreier, akpm
On 6/15/07, Vivek Goyal <vgoyal@in.ibm.com> wrote:
> On Wed, Jun 13, 2007 at 03:22:55PM -0700, Natalie Protasevich wrote:
> [..]
> > >Seems it would be cleaner to figure out some way to build es7000.c for
> > >if CONFIG_X86_ES7000 is set? Or just move them here all the time?
> > >
> > > > ---
> > >linux-2.6.22-rc4-git4/include/asm-i386/mach-es7000/mach_mpparse.h~i386-e
> > >s7000-build-breakage-fix 2007-06-13 22:52:14.000000000 +0530
> > > > +++
> > >linux-2.6.22-rc4-git4-vivek/include/asm-i386/mach-es7000/mach_mpparse.h
> > >2007-06-13 22:52:14.000000000 +0530
> > > > @@ -18,6 +18,12 @@ extern int parse_unisys_oem (char *oempt
> > > > extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
> > > > extern void setup_unisys(void);
> > > >
> > > > +#ifndef CONFIG_X86_GENERICARCH
> > > > +extern int acpi_madt_oem_check(char *oem_id, char *oem_table_id);
> > > > +extern int mps_oem_check(struct mp_config_table *mpc, char *oem,
> > > > + char *productid);
> > > > +#endif
> > >
> > >It seems that this #ifndef is not needed -- even if there is another
> > >declaration of these functions that is visible, the signatures should
> > >match so it should be OK.
> >
> > I just finished my test builds with and without GENERIC, so I can
> > suggest just move all functions to arch/i386/mach-es7000/es7000plat.c
> > - es7000_sw_apic() ,es7000_enable_apic_mode(),acpi_madt_oem_check(),
> > mps_oem_check() and make them non-static - from
> > arch/i386/mach-generic/es7000.c
>
> I think this will also break with CONFIG_X86_GENERIC=y. The moment you
> make es7000 specific acpi_madt_oem_check() non static, It will conflict
> with generic definition present in mach-generic/probe.c. That function is
> a generic function designed to probe for underlying subarch.
I am not sure why it needs to be static, since the genapic structure
in include/asm-i386/ just being a switch table for the corresponding
functions of the right type. It compiles for me, and i just need to
extern those in include/asm/mach-es7000/mach_apic.h:
...
extern void es7000_sw_apic(void);
extern void __init enable_apic_mode(void);
extern __init int mps_oem_check(struct mp_config_table *mpc, char
*oem, char *productid);
extern int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id);
...
or do this in mach_mpparse.h - wherever I removed them from. I
apologize again, will make a descent patch shortly just so we can look
closer and evaluate possible approach.
Regards,
--Natalie
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: CONFIG_X86_ES7000=y, CONFIG_X86_GENERICARCH=n, CONFIG_ACPI=y build broken
2007-06-13 22:22 ` Natalie Protasevich
@ 2007-06-15 15:29 ` Vivek Goyal
2007-06-15 17:27 ` Natalie Protasevich
0 siblings, 1 reply; 9+ messages in thread
From: Vivek Goyal @ 2007-06-15 15:29 UTC (permalink / raw)
To: Natalie Protasevich; +Cc: linux-kernel, rdreier, akpm
On Wed, Jun 13, 2007 at 03:22:55PM -0700, Natalie Protasevich wrote:
[..]
> >Seems it would be cleaner to figure out some way to build es7000.c for
> >if CONFIG_X86_ES7000 is set? Or just move them here all the time?
> >
> > > ---
> >linux-2.6.22-rc4-git4/include/asm-i386/mach-es7000/mach_mpparse.h~i386-e
> >s7000-build-breakage-fix 2007-06-13 22:52:14.000000000 +0530
> > > +++
> >linux-2.6.22-rc4-git4-vivek/include/asm-i386/mach-es7000/mach_mpparse.h
> >2007-06-13 22:52:14.000000000 +0530
> > > @@ -18,6 +18,12 @@ extern int parse_unisys_oem (char *oempt
> > > extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
> > > extern void setup_unisys(void);
> > >
> > > +#ifndef CONFIG_X86_GENERICARCH
> > > +extern int acpi_madt_oem_check(char *oem_id, char *oem_table_id);
> > > +extern int mps_oem_check(struct mp_config_table *mpc, char *oem,
> > > + char *productid);
> > > +#endif
> >
> >It seems that this #ifndef is not needed -- even if there is another
> >declaration of these functions that is visible, the signatures should
> >match so it should be OK.
>
> I just finished my test builds with and without GENERIC, so I can
> suggest just move all functions to arch/i386/mach-es7000/es7000plat.c
> - es7000_sw_apic() ,es7000_enable_apic_mode(),acpi_madt_oem_check(),
> mps_oem_check() and make them non-static - from
> arch/i386/mach-generic/es7000.c
I think this will also break with CONFIG_X86_GENERIC=y. The moment you
make es7000 specific acpi_madt_oem_check() non static, It will conflict
with generic definition present in mach-generic/probe.c. That function is
a generic function designed to probe for underlying subarch.
Thanks
Vivek
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: CONFIG_X86_ES7000=y, CONFIG_X86_GENERICARCH=n, CONFIG_ACPI=y build broken
[not found] <19D0D50E9B1D0A40A9F0323DBFA04ACC023B0EB9@USRV-EXCH4.na.uis.unisys.com>
@ 2007-06-13 22:22 ` Natalie Protasevich
2007-06-15 15:29 ` Vivek Goyal
0 siblings, 1 reply; 9+ messages in thread
From: Natalie Protasevich @ 2007-06-13 22:22 UTC (permalink / raw)
To: linux-kernel, rdreier, akpm, vgoyal
> > Can you please try the attached patch? I have compiled it with
> CONFIG_ES7000=y
> > and CONFIG_X86_GENERICARCH=n. But don't have any ES7000 machine to
> test it.
>
> I actually don't have anything remotely like ES7000 iether. I just
> found the problem while tracking down another randconfig failure.
>
> > Subarch build procedure is not straightforward and this patch adds to
> the
> > misery. Please suggest if there is a better way of handling things.
>
> > +/*
> > + * This file also gets compiled if CONFIG_X86_GENERICARCH is set.
> Generic
> > + * arch already has got following function definitions
> (asm-generic/es7000.c)
> > + * hence no need to define these for that case.
> > + */
> > +#ifndef CONFIG_X86_GENERICARCH
>
> Seems it would be cleaner to figure out some way to build es7000.c for
> if CONFIG_X86_ES7000 is set? Or just move them here all the time?
>
> > ---
> linux-2.6.22-rc4-git4/include/asm-i386/mach-es7000/mach_mpparse.h~i386-e
> s7000-build-breakage-fix 2007-06-13 22:52:14.000000000 +0530
> > +++
> linux-2.6.22-rc4-git4-vivek/include/asm-i386/mach-es7000/mach_mpparse.h
> 2007-06-13 22:52:14.000000000 +0530
> > @@ -18,6 +18,12 @@ extern int parse_unisys_oem (char *oempt
> > extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
> > extern void setup_unisys(void);
> >
> > +#ifndef CONFIG_X86_GENERICARCH
> > +extern int acpi_madt_oem_check(char *oem_id, char *oem_table_id);
> > +extern int mps_oem_check(struct mp_config_table *mpc, char *oem,
> > + char *productid);
> > +#endif
>
> It seems that this #ifndef is not needed -- even if there is another
> declaration of these functions that is visible, the signatures should
> match so it should be OK.
I just finished my test builds with and without GENERIC, so I can
suggest just move all functions to arch/i386/mach-es7000/es7000plat.c
- es7000_sw_apic() ,es7000_enable_apic_mode(),acpi_madt_oem_check(),
mps_oem_check() and make them non-static - from
arch/i386/mach-generic/es7000.c and I think I externed couple things
in asm/mach-es7000/mach_apic.h. So the file
arch/i386/mach-generic/es7000.c looks very simple:
/* * APIC driver for the Unisys ES7000 chipset.
*/
#define APIC_DEFINITION 1
#include <linux/threads.h>
#include <linux/cpumask.h>
#include <asm/smp.h>
#include <asm/mpspec.h>
#include <asm/genapic.h>
#include <asm/fixmap.h>
#include <asm/apicdef.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/smp.h>
#include <linux/init.h>
#include <asm/mach-es7000/mach_apicdef.h>
#include <asm/mach-es7000/mach_apic.h>
#include <asm/mach-es7000/mach_ipi.h>
#include <asm/mach-es7000/mach_mpparse.h>
#include <asm/mach-es7000/mach_wakecpu.h>
static int probe_es7000(void)
{
/* probed later in mptable/ACPI hooks */
return 0;
}
struct genapic apic_es7000 = APIC_INIT("es7000", probe_es7000);
and no ifdefs. Sorry for this skimpy description without actual patch...
I can send a patch later on, or you guys can try it yourselves :)
sorry have such a tight time this afternoon, only can back to my
computer after 7-8 pm...
Regards,
--Natalie
^ permalink raw reply [flat|nested] 9+ messages in thread
* RE: CONFIG_X86_ES7000=y, CONFIG_X86_GENERICARCH=n, CONFIG_ACPI=y build broken
[not found] ` <32209efe0706131107w157fd59bk22f1fe62e4d1c733@mail.gmail.com>
@ 2007-06-13 18:53 ` Natalie Protasevich
0 siblings, 0 replies; 9+ messages in thread
From: Natalie Protasevich @ 2007-06-13 18:53 UTC (permalink / raw)
To: linux-kernel
> From: Vivek Goyal [mailto:vgoyal@in.ibm.com]
> Sent: Wednesday, June 13, 2007 11:38 AM
> To: Roland Dreier
> Cc: linux-kernel@vger.kernel.org; Protasevich, Natalie;
> akpm@linux-foundation.org
> Subject: Re: CONFIG_X86_ES7000=y, CONFIG_X86_GENERICARCH=n,
> CONFIG_ACPI=y build broken
>
> On Tue, Jun 12, 2007 at 12:13:50PM -0700, Roland Dreier wrote:
> > (sending to Vivek since he seems to be one of the last people to touch
> > this code)
> >
> > For some strange reason I found myself compiling a kernel with
> > CONFIG_X86_ES7000 and CONFIG_ACPI set and CONFIG_X86_GENERICARCH not
> > set. It died with
> >
> > arch/i386/kernel/built-in.o: In function `acpi_parse_madt':
> > boot.c:(.init.text+0x68b7): undefined reference to
> `acpi_madt_oem_check'
> > arch/i386/kernel/built-in.o: In function `get_smp_config':
> > (.init.text+0x9f98): undefined reference to `mps_oem_check'
> > arch/i386/kernel/built-in.o: In function `connect_bsp_APIC':
> > (.init.text+0xa340): undefined reference to `enable_apic_mode'
> > arch/i386/kernel/built-in.o: In function `connect_bsp_APIC':
> > (.init.text+0xa370): undefined reference to `enable_apic_mode'
> >
> > this seems to be because eg acpi_madt_oem_check() and mps_oem_check()
> > are defined in arch/i386/mach-generic/es7000.c, but arch/i386/Makefile
> > only goes into mach-generic if CONFIG_X86_GENERICARCH is set.
> > I didn't track down why enable_apic_mode is broken yet.
> >
>
Vivek,
I also have a patch that seems to work... I did remove the functions
from mach-generic/es7000.c and added them same place you did, so the
code is not duplicated and I didn't have to make any ifdefs.
As soon as your patch works though I think it's fine.
Thanks,
--Natalie
> Hi Roland,
>
> Can you please try the attached patch? I have compiled it with
> CONFIG_ES7000=y
> and CONFIG_X86_GENERICARCH=n. But don't have any ES7000 machine to test
> it.
>
> I have compiled and booted the kernel on my machine with
> CONFIG_X86_GENERICARCH=y.
>
> Subarch build procedure is not straightforward and this patch adds to
> the
> misery. Please suggest if there is a better way of handling things.
>
>
>
> o Commit 1833d6bc72893265f22addd79cf52e6987496e0f broke the build if
> compiled with CONFIG_ES7000=y and CONFIG_X86_GENERICARCH=n
>
> o Fix the build issue. Provided the definitions of missing functions.
>
>
> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
> ---
>
> linux-2.6.22-rc4-git4-vivek/arch/i386/mach-es7000/es7000plat.c
> | 48 ++++++++++
> linux-2.6.22-rc4-git4-vivek/include/asm-i386/mach-es7000/mach_apic.h
> | 4
> linux-2.6.22-rc4-git4-vivek/include/asm-i386/mach-es7000/mach_mpparse.h
> | 6 +
> 3 files changed, 58 insertions(+)
>
> diff -puN
> arch/i386/mach-es7000/es7000plat.c~i386-es7000-build-breakage-fix
> arch/i386/mach-es7000/es7000plat.c
> ---
> linux-2.6.22-rc4-git4/arch/i386/mach-es7000/es7000plat.c~i386-es7000-bui
> ld-breakage-fix 2007-06-13 22:52:14.000000000 +0530
> +++ linux-2.6.22-rc4-git4-vivek/arch/i386/mach-es7000/es7000plat.c
> 2007-06-13 22:53:03.000000000 +0530
> @@ -40,6 +40,7 @@
> #include <asm/smp.h>
> #include <asm/apicdef.h>
> #include "es7000.h"
> +#include <mach_mpparse.h>
>
> /*
> * ES7000 Globals
> @@ -174,6 +175,53 @@ find_unisys_acpi_oem_table(unsigned long
> }
> #endif
>
> +/*
> + * This file also gets compiled if CONFIG_X86_GENERICARCH is set.
> Generic
> + * arch already has got following function definitions
> (asm-generic/es7000.c)
> + * hence no need to define these for that case.
> + */
> +#ifndef CONFIG_X86_GENERICARCH
> +void es7000_sw_apic(void);
> +void __init enable_apic_mode(void)
> +{
> + es7000_sw_apic();
> + return;
> +}
> +
> +__init int mps_oem_check(struct mp_config_table *mpc, char *oem,
> + char *productid)
> +{
> + if (mpc->mpc_oemptr) {
> + struct mp_config_oemtable *oem_table =
> + (struct mp_config_oemtable *)mpc->mpc_oemptr;
> + if (!strncmp(oem, "UNISYS", 6))
> + return parse_unisys_oem((char *)oem_table);
> + }
> + return 0;
> +}
> +#ifdef CONFIG_ACPI
> +/* Hook from generic ACPI tables.c */
> +int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
> +{
> + unsigned long oem_addr;
> + if (!find_unisys_acpi_oem_table(&oem_addr)) {
> + if (es7000_check_dsdt())
> + return parse_unisys_oem((char *)oem_addr);
> + else {
> + setup_unisys();
> + return 1;
> + }
> + }
> + return 0;
> +}
> +#else
> +int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
> +{
> + return 0;
> +}
> +#endif
> +#endif /* COFIG_X86_GENERICARCH */
> +
> static void
> es7000_spin(int n)
> {
> diff -puN
> include/asm-i386/mach-es7000/mach_apic.h~i386-es7000-build-breakage-fix
> include/asm-i386/mach-es7000/mach_apic.h
> ---
> linux-2.6.22-rc4-git4/include/asm-i386/mach-es7000/mach_apic.h~i386-es70
> 00-build-breakage-fix 2007-06-13 22:52:14.000000000 +0530
> +++ linux-2.6.22-rc4-git4-vivek/include/asm-i386/mach-es7000/mach_apic.h
> 2007-06-13 22:52:14.000000000 +0530
> @@ -73,6 +73,10 @@ static inline void init_apic_ldr(void)
> apic_write_around(APIC_LDR, val);
> }
>
> +#ifndef CONFIG_X86_GENERICARCH
> +extern void enable_apic_mode(void);
> +#endif
> +
> extern int apic_version [MAX_APICS];
> static inline void setup_apic_routing(void)
> {
> diff -puN
> include/asm-i386/mach-es7000/mach_mpparse.h~i386-es7000-build-breakage-f
> ix include/asm-i386/mach-es7000/mach_mpparse.h
> ---
> linux-2.6.22-rc4-git4/include/asm-i386/mach-es7000/mach_mpparse.h~i386-e
> s7000-build-breakage-fix 2007-06-13 22:52:14.000000000 +0530
> +++
> linux-2.6.22-rc4-git4-vivek/include/asm-i386/mach-es7000/mach_mpparse.h
> 2007-06-13 22:52:14.000000000 +0530
> @@ -18,6 +18,12 @@ extern int parse_unisys_oem (char *oempt
> extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
> extern void setup_unisys(void);
>
> +#ifndef CONFIG_X86_GENERICARCH
> +extern int acpi_madt_oem_check(char *oem_id, char *oem_table_id);
> +extern int mps_oem_check(struct mp_config_table *mpc, char *oem,
> + char *productid);
> +#endif
> +
> #ifdef CONFIG_ACPI
>
> static inline int es7000_check_dsdt(void)
> _
>
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2007-06-17 14:35 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-06-12 19:13 CONFIG_X86_ES7000=y, CONFIG_X86_GENERICARCH=n, CONFIG_ACPI=y build broken Roland Dreier
2007-06-13 17:37 ` Vivek Goyal
2007-06-13 20:39 ` Roland Dreier
2007-06-15 15:57 ` Vivek Goyal
[not found] <19D0D50E9B1D0A40A9F0323DBFA04ACC023B0EB8@USRV-EXCH4.na.uis.unisys.com>
[not found] ` <32209efe0706131107w157fd59bk22f1fe62e4d1c733@mail.gmail.com>
2007-06-13 18:53 ` Natalie Protasevich
[not found] <19D0D50E9B1D0A40A9F0323DBFA04ACC023B0EB9@USRV-EXCH4.na.uis.unisys.com>
2007-06-13 22:22 ` Natalie Protasevich
2007-06-15 15:29 ` Vivek Goyal
2007-06-15 17:27 ` Natalie Protasevich
[not found] <19D0D50E9B1D0A40A9F0323DBFA04ACC023B0EBD@USRV-EXCH4.na.uis.unisys.com>
2007-06-17 14:34 ` Natalie Protasevich
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).