From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755403AbXFTN6d (ORCPT ); Wed, 20 Jun 2007 09:58:33 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1750842AbXFTN60 (ORCPT ); Wed, 20 Jun 2007 09:58:26 -0400 Received: from viefep18-int.chello.at ([213.46.255.22]:7708 "EHLO viefep14-int.chello.at" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1750888AbXFTN6Y convert rfc822-to-8bit (ORCPT ); Wed, 20 Jun 2007 09:58:24 -0400 Date: Wed, 20 Jun 2007 15:58:21 +0200 From: Carlo Wood To: Wang Zhenyu Cc: Linus Torvalds , Dave Jones , linux-kernel@vger.kernel.org, eric@anholt.net, lethal@linux-sh.org, y-goto@jp.fujitsu.com Subject: Re: 2.6.22-rc5 regression Message-ID: <20070620135821.GA5524@alinoe.com> Mail-Followup-To: Carlo Wood , Wang Zhenyu , Linus Torvalds , Dave Jones , linux-kernel@vger.kernel.org, eric@anholt.net, lethal@linux-sh.org, y-goto@jp.fujitsu.com References: <20070617214905.GA6207@alinoe.com> <20070618181225.GB8054@alinoe.com> <20070618195415.GA7481@alinoe.com> <20070618225009.GE13538@alinoe.com> <20070619233716.GA5779@alinoe.com> <20070620011521.GB2856@zhen-devel.sh.intel.com> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8BIT In-Reply-To: <20070620011521.GB2856@zhen-devel.sh.intel.com> User-Agent: Mutt/1.5.13 (2006-08-11) Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org On Wed, Jun 20, 2007 at 09:15:21AM +0800, Wang Zhenyu wrote: > Carlo, pls try a kernel param of "pci=nommconf" to see if that could > fix your hang. This does not fix the problem. Prestine 2.6.22-rc5 with param pci=nommconf results in: ^MPress any key to continue. ^MPress any key to continue. ^MPress any key to continue. ^[[H^[[J GNU GRUB version 0.97 (635K lower / 2095680K upper memory) ^[[m^[[4;2H+-------------------------------------------------------------------------+^[[5;2H|^[[5;76H|^[[6;2H|^[[6;76H|^[[7;2H|^[[7;76H|^[[8;2H|^[[8;76H|^[[9;2H|^[[9;76H|^[[10;2H|^[[10;76H|^[[11;2H|^[[11;76H|^[[12;2H|^[[12;76H|^[[13;2H|^[[13;76H|^[[14;2H|^[[14;76H|^[[15;2H|^[[15;76H|^[[16;2H|^[[16;76H|^[[17;2H+-------------------------------------------------------------------------+^[[m Use the ^ and v keys to select which entry is highlighted. Press enter to boot the selected OS, 'e' to edit the commands before booting, or 'c' for a command-line.^[[5;78H ^[[m^[[7m^[[5;3H Debian GNU/Linux, kernel 2.6.22-rc5-agp0-188e1f81ba31af1b65a2f3611df4> ^[[5;75H^[[m^[[m^[[6;3H Debian GNU/Linux, kernel 2.6.22-rc5-agp0-188e1f81ba31af1b65a2f3611df4> ^[[6;75H^[[m^[[m^[[7;3H Debian GNU/Linux, kernel 2.6.22-rc5-agp0-188e1f81ba31af1b65a2f3611df4> ^[[7;75H^[[m^[[m^[[8;3H Debian GNU/Linux, kernel 2.6.22-rc5-master-188e1f81ba31af1b65a2f3611d> ^[[8;75H^[[m^[[m^[[9;3H Debian GNU/Linux, kernel 2.6.22-rc5-master-188e1f81ba31af1b65a2f3611d> ^[[9;75H^[[m^[[m^[[10;3H Debian GNU/Linux, kernel 2.6.22-rc5-master-188e1f81ba31af1b65a2f3611d> ^[[10;75H^[[m^[[m^[[11;3H Debian GNU/Linux, kernel 2.6.22-rc4-hikaru-amd64 ^[[11;75H^[[m^[[m^[[12;3H Debian GNU/Linux, kernel 2.6.22-rc4-hikaru-amd64 (single-user mode) ^[[12;75H^[[m^[[m^[[13;3H Debian GNU/Linux, kernel 2.6.22-rc4-hikaru-amd64 (serial console) ^[[13;75H^[[m^[[m^[[14;3H Debian GNU/Linux, kernel 2.6.22-rc2-bisect-2c8307f63dd5caaf7ff8ad5118> ^[[14;75H^[[m^[[m^[[15;3H Debian GNU/Linux, kernel 2.6.22-rc2-bisect-2c8307f63dd5caaf7ff8ad5118> ^[[15;75H^[[m^[[m^[[16;3H Debian GNU/Linux, kernel 2.6.22-rc2-bisect-2c8307f63dd5caaf7ff8ad5118> ^[[16;75H^[[m^[[16;78Hv^[[5;75H^[[23;4H The highlighted entry will be booted automatically in 5 seconds. ^[[5;75H^[[23;4H The highlighted entry will be booted automatically in 4 seconds. ^[[5;75H^[[23;4H ^[[5;75H^[[m^[[5;3H Debian GNU/Linux, kernel 2.6.22-rc5-agp0-188e1f81ba31af1b65a2f3611df4> ^[[5;75H^[[m^[[m^[[7m^[[6;3H Debian GNU/Linux, kernel 2.6.22-rc5-agp0-188e1f81ba31af1b65a2f3611df4> ^[[6;75H^[[m^[[m^[[6;3H Debian GNU/Linux, kernel 2.6.22-rc5-agp0-188e1f81ba31af1b65a2f3611df4> ^[[6;75H^[[m^[[m^[[7m^[[7;3H Debian GNU/Linux, kernel 2.6.22-rc5-agp0-188e1f81ba31af1b65a2f3611df4> ^[[7;75H^[[m^[[m^[[7;3H Debian GNU/Linux, kernel 2.6.22-rc5-agp0-188e1f81ba31af1b65a2f3611df4> ^[[7;75H^[[m^[[m^[[7m^[[8;3H Debian GNU/Linux, kernel 2.! 6.22-rc5 -master-188e1f81ba31af1b65a2f3611d> ^[[8;75H^[[m^[[m^[[8;3H Debian GNU/Linux, kernel 2.6.22-rc5-master-188e1f81ba31af1b65a2f3611d> ^[[8;75H^[[m^[[m^[[7m^[[9;3H Debian GNU/Linux, kernel 2.6.22-rc5-master-188e1f81ba31af1b65a2f3611d> ^[[9;75H^[[m^[[m^[[9;3H Debian GNU/Linux, kernel 2.6.22-rc5-master-188e1f81ba31af1b65a2f3611d> ^[[9;75H^[[m^[[m^[[7m^[[10;3H Debian GNU/Linux, kernel 2.6.22-rc5-master-188e1f81ba31af1b65a2f3611d> ^[[10;75H^[[m^[[H^[[J Booting 'Debian GNU/Linux, kernel 2.6.22-rc5-master-188e1f81ba31af1b65a2f3611 df4c670b092bbac-amd64 (serial console)' root (hd0,0) Filesystem type is ext2fs, partition type 0xfd kernel /vmlinuz-2.6.22-rc5-master-188e1f81ba31af1b65a2f3611df4c670b092bbac-amd 64 root=/dev/md2 ro pci=nommconf console=tty0 console=ttyS0,38400n8 [Linux-bzImage, setup=0x1e00, size=0x17ac68] initrd /initrd.img-2.6.22-rc5-master-188e1f81ba31af1b65a2f3611df4c670b092bbac- amd64 [Linux-initrd @ 0x379e6000, 0x60989e bytes] savedefault Linux version 2.6.22-rc5-master-188e1f81ba31af1b65a2f3611df4c670b092bbac-amd64 (carlo@hikaru) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Sun Jun 17 18:45:05 CEST 2007 Command line: root=/dev/md2 ro pci=nommconf console=tty0 console=ttyS0,38400n8 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ff90000 (usable) BIOS-e820: 000000007ff90000 - 000000007ff9e000 (ACPI data) BIOS-e820: 000000007ff9e000 - 000000007ffe0000 (ACPI NVS) BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000180000000 (usable) end_pfn_map = 1572864 DMI 2.4 present. ACPI: RSDP 000FAE40, 0024 (r2 ACPIAM) ACPI: XSDT 7FF90100, 0054 (r1 ˙˙˙˙˙˙ ˙˙˙˙˙˙˙˙ 3000709 MSFT 97) ACPI: FACP 7FF90290, 00F4 (r3 MSTEST OEMFACP 3000709 MSFT 97) ACPI: DSDT 7FF905C0, 8E7D (r1 A0483 A0483035 35 INTL 20060113) ACPI: FACS 7FF9E000, 0040 ACPI: APIC 7FF90390, 006C (r1 MSTEST OEMAPIC 3000709 MSFT 97) ACPI: MCFG 7FF90400, 003C (r1 MSTEST OEMMCFG 3000709 MSFT 97) ACPI: SLIC 7FF90440, 0176 (r1 ˙˙˙˙˙˙ ˙˙˙˙˙˙˙˙ 3000709 MSFT 97) ACPI: OEMB 7FF9E040, 007B (r1 MSTEST AMI_OEM 3000709 MSFT 97) ACPI: HPET 7FF99440, 0038 (r1 MSTEST OEMHPET 3000709 MSFT 97) No NUMA configuration found Faking a node at 0000000000000000-0000000180000000 Bootmem setup node 0 0000000000000000-0000000180000000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1572864 early_node_map[3] active PFN ranges 0: 0 -> 158 0: 256 -> 524176 0: 1048576 -> 1572864 ACPI: PM-Timer IO Port: 0x808 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled) Processor #3 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled) Processor #2 ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Setting APIC routing to flat ACPI: HPET id: 0x8086a202 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information swsusp: Registered nosave memory region: 000000000009e000 - 000000000009f000 swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000 swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000 swsusp: Registered nosave memory region: 000000007ff90000 - 000000007ff9e000 swsusp: Registered nosave memory region: 000000007ff9e000 - 000000007ffe0000 swsusp: Registered nosave memory region: 000000007ffe0000 - 0000000080000000 swsusp: Registered nosave memory region: 0000000080000000 - 00000000fee00000 swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee01000 swsusp: Registered nosave memory region: 00000000fee01000 - 00000000ffb00000 swsusp: Registered nosave memory region: 00000000ffb00000 - 0000000100000000 Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000) SMP: Allowing 4 CPUs, 0 hotplug CPUs PERCPU: Allocating 37768 bytes of per cpu data Built 1 zonelists. Total pages: 1025869 Kernel command line: root=/dev/md2 ro pci=nommconf console=tty0 console=ttyS0,38400n8 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 time.c: Detected 2666.664 MHz processor. Console: colour VGA+ 80x25 Checking aperture... PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing software IO TLB between 0x1059000 - 0x5059000 Memory: 4030964k/6291456k available (2015k kernel code, 162500k reserved, 947k data, 296k init) Calibrating delay using timer specific routine.. 5336.90 BogoMIPS (lpj=10673812) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L3 cache: 4096K CPU 0/0 -> Node 0 using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) SMP alternatives: switching to UP code ACPI: Core revision 20070126 Using local APIC timer interrupts. result 16666638 Detected 16.666 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/4 APIC 0x3 Initializing CPU#1 Calibrating delay using timer specific routine.. 5333.36 BogoMIPS (lpj=10666736) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L3 cache: 4096K CPU 1/3 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU1: Thermal monitoring enabled (TM2) Intel(R) Core(TM)2 Quad CPU @ 2.66GHz stepping 07 checking TSC synchronization [CPU#0 -> CPU#1]: passed. SMP alternatives: switching to SMP code Booting processor 2/4 APIC 0x1 Initializing CPU#2 Calibrating delay using timer specific routine.. 5333.48 BogoMIPS (lpj=10666973) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L3 cache: 4096K CPU 2/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU2: Thermal monitoring enabled (TM2) Intel(R) Core(TM)2 Quad CPU @ 2.66GHz stepping 07 checking TSC synchronization [CPU#0 -> CPU#2]: passed. SMP alternatives: switching to SMP code Booting processor 3/4 APIC 0x2 Initializing CPU#3 Calibrating delay using timer specific routine.. 5333.54 BogoMIPS (lpj=10667095) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L3 cache: 4096K CPU 3/2 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU3: Thermal monitoring enabled (TM2) Intel(R) Core(TM)2 Quad CPU @ 2.66GHz stepping 07 checking TSC synchronization [CPU#0 -> CPU#3]: passed. Brought up 4 CPUs migration_cost=3361 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 0480-04bf claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NET: Registered protocol family 8 NET: Registered protocol family 20 PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz ACPI: RTC can wake from S4 pnp: 00:01: iomem range 0xfed14000-0xfed19fff has been reserved pnp: 00:07: ioport range 0x290-0x297 has been reserved pnp: 00:08: iomem range 0xffafe000-0xffb0cbff could not be reserved pnp: 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved pnp: 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved pnp: 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved pnp: 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved pnp: 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved pnp: 00:0d: iomem range 0xe0000000-0xefffffff has been reserved pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved pnp: 00:0e: iomem range 0xc0000-0xcffff has been reserved pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved pnp: 00:0e: iomem range 0x100000-0x7fffffff could not be reserved PCI: Bridge: 0000:00:01.0 IO window: a000-afff MEM window: f8800000-fe8fffff Time: tsc clocksource has been installed. PREFETCH window: bfe00000-dfdfffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: dfe00000-dfefffff PCI: Bridge: 0000:00:1c.5 IO window: b000-bfff MEM window: fe900000-fe9fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: c000-cfff MEM window: fea00000-feafffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17 NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 12582912 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 6182k freed audit: initializing netlink socket (disabled) audit(1182347467.492:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) assign_interrupt_mode Found MSI capability assign_interrupt_mode Found MSI capability assign_interrupt_mode Found MSI capability Real Time Clock Driver v1.12ac Linux agpgart interface v0.102 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 input: AT Translated Set 2 keyboard as /class/input/input0 Freeing unused kernel memory: 296k freed Loading, please wait... Begin: Loading essential drivers... ... Done. Begin: Running /scripts/init-premount ... ACPI Warning (tbutils-0158): Incorrect checksum in table [OEMB] - F5, should be F4 [20070126] ACPI: SSDT 7FF9E0C0, 0208 (r1 AMI CPU1PM 1 INTL 20060113) ACPI: SSDT 7FF9E2D0, 013A (r1 AMI CPU2PM 1 INTL 20060113) ACPI: SSDT 7FF9E410, 013A (r1 AMI CPU3PM 1 INTL 20060113) ACPI: SSDT 7FF9E550, 013A (r1 AMI CPU4PM 1 INTL 20060113) USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected SCSI subsystem initialized ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000e080 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d800 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d880 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000dc00 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfebff400 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 4 ports detected usb 4-2: new low speed USB device using uhci_hcd and address 2 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 6 ports detected usb 4-2: device descriptor read/all, error -71 ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 21 (level, low) -> IRQ 21 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[feaff800-feafffff] Max Packet=[2048] IR/IT contexts=[4/8] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 usb 4-2: new low speed USB device using uhci_hcd and address 4 usb 4-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: Microsoft Microsoft Wireless Intellimouse Explorer® 1.0A as /class/input/input1 input: USB HID v1.10 Mouse [Microsoft Microsoft Wireless Intellimouse Explorer® 1.0A] on usb-0000:00:1d.1-2 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 cmd 0xffffc2000144a900 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 0 ata2: SATA max UDMA/133 cmd 0xffffc2000144a980 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 0 ata3: SATA max UDMA/133 cmd 0xffffc2000144aa00 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 0 ata4: SATA max UDMA/133 cmd 0xffffc2000144aa80 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 0 ata5: SATA max UDMA/133 cmd 0xffffc2000144ab00 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 0 ata6: SATA max UDMA/133 cmd 0xffffc2000144ab80 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 0 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ata_hpa_resize 1: sectors = 145226112, hpa_sectors = 145226112 ata1.00: ATA-7: WDC WD740ADFD-00NLR1, 20.07P20, max UDMA/133 ata1.00: 145226112 sectors, multi 0: LBA48 NCQ (depth 31/32) ata1.00: ata_hpa_resize 1: sectors = 145226112, hpa_sectors = 145226112 ata1.00: configured for UDMA/133 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ata_hpa_resize 1: sectors = 145226112, hpa_sectors = 145226112 ata2.00: ATA-7: WDC WD740ADFD-00NLR1, 20.07P20, max UDMA/133 ata2.00: 145226112 sectors, multi 0: LBA48 NCQ (depth 31/32) ata2.00: ata_hpa_resize 1: sectors = 145226112, hpa_sectors = 145226112 ata2.00: configured for UDMA/133 ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ata_hpa_resize 1: sectors = 145226112, hpa_sectors = 145226112 ata3.00: ATA-7: WDC WD740ADFD-00NLR1, 20.07P20, max UDMA/133 ata3.00: 145226112 sectors, multi 0: LBA48 NCQ (depth 31/32) ata3.00: ata_hpa_resize 1: sectors = 145226112, hpa_sectors = 145226112 ata3.00: configured for UDMA/133 ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625142448 ata4.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133 ata4.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32) ata4.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625142448 ata4.00: configured for UDMA/133 ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata5.00: ATAPI: LITE-ON DVDRW LH-20A1S, 9L02, max UDMA/100 ata5.00: configured for UDMA/100 ata6: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA WDC WD740ADFD-00 20.0 PQ: 0 ANSI: 5 scsi 1:0:0:0: Direct-Access ATA WDC WD740ADFD-00 20.0 PQ: 0 ANSI: 5 scsi 2:0:0:0: Direct-Access ATA WDC WD740ADFD-00 20.0 PQ: 0 ANSI: 5 scsi 3:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 scsi 4:0:0:0: CD-ROM LITE-ON DVDRW LH-20A1S 9L02 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 145226112 512-byte hardware sectors (74356 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 145226112 512-byte hardware sectors (74356 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 > sd 0:0:0:0: [sda] Attached SCSI disk sd 1:0:0:0: [sdb] 145226112 512-byte hardware sectors (74356 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 145226112 512-byte hardware sectors (74356 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 > sd 1:0:0:0: [sdb] Attached SCSI disk sd 2:0:0:0: [sdc] 145226112 512-byte hardware sectors (74356 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdc] 145226112 512-byte hardware sectors (74356 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 > sd 2:0:0:0: [sdc] Attached SCSI disk sd 3:0:0:0: [sdd] 625142448 512-byte hardware sectors (320073 MB) sd 3:0:0:0: [sdd] Write Protect is off sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdd] 625142448 512-byte hardware sectors (320073 MB) sd 3:0:0:0: [sdd] Write Protect is off sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdd: sdd1 sdd2 sdd3 sd 3:0:0:0: [sdd] Attached SCSI disk sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 sd 2:0:0:0: Attached scsi generic sg2 type 0 sd 3:0:0:0: Attached scsi generic sg3 type 0 sr 4:0:0:0: Attached scsi generic sg4 type 5 Done. Begin: Mounting root file system... ... Begin: Running /scripts/local-top ... Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Begin: Loading Mmd: raid1 personality registered for level 1 D modules ... raid5: automatically using best checksumming function: generic_sse Success: loaded module raid1. generic_sse: 9514.000 MB/sec raid5: using function: generic_sse (9514.000 MB/sec) raid6: int64x1 2500 MB/s raid6: int64x2 3018 MB/s raid6: int64x4 2883 MB/s raid6: int64x8 1930 MB/s raid6: sse2x1 4191 MB/s raid6: sse2x2 5469 MB/s raid6: sse2x4 7920 MB/s raid6: using algorithm sse2x4 (7920 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 Success: loaded module raid456. Done. Begin: Amd: md0 stopped. ssembling all MD arrays ... md: bind md: bind md: bind raid1: raid set md0 active with 3 out of 3 mirrors mdadm: /dev/md0 md: md1 stopped. has been started with 3 drives. md: bind md: bind md: bind raid5: device sda2 operational as raid disk 0 raid5: device sdc2 operational as raid disk 2 raid5: device sdb2 operational as raid disk 1 raid5: allocated 3212kB for md1 raid5: raid level 5 set md1 active with 3 out of 3 devices, algorithm 2 RAID5 conf printout: --- rd:3 wd:3 disk 0, o:1, dev:sda2 disk 1, o:1, dev:sdb2 disk 2, o:1, dev:sdc2 mdadm: /dev/md1 md: md2 stopped. has been started with 3 drives. md: bind md: bind md: bind raid5: device sda3 operational as raid disk 0 raid5: device sdc3 operational as raid disk 2 raid5: device sdb3 operational as raid disk 1 raid5: allocated 3212kB for md2 raid5: raid level 5 set md2 active with 3 out of 3 devices, algorithm 2 RAID5 conf printout: --- rd:3 wd:3 disk 0, o:1, dev:sda3 disk 1, o:1, dev:sdb3 disk 2, o:1, dev:sdc3 mdadm: /dev/md2 md: md3 stopped. has been started with 3 drives. md: bind md: bind md: bind raid5: device sda5 operational as raid disk 0 raid5: device sdc5 operational as raid disk 2 raid5: device sdb5 operational as raid disk 1 raid5: allocated 3212kB for md3 raid5: raid level 5 set md3 active with 3 out of 3 devices, algorithm 2 RAID5 conf printout: --- rd:3 wd:3 disk 0, o:1, dev:sda5 disk 1, o:1, dev:sdb5 disk 2, o:1, dev:sdc5 mdadm: /dev/md3 md: md4 stopped. has been started with 3 drives. md: bind md: bind md: bind raid5: device sda6 operational as raid disk 0 raid5: device sdc6 operational as raid disk 2 raid5: device sdb6 operational as raid disk 1 raid5: allocated 3212kB for md4 raid5: raid level 5 set md4 active with 3 out of 3 devices, algorithm 2 RAID5 conf printout: --- rd:3 wd:3 disk 0, o:1, dev:sda6 disk 1, o:1, dev:sdb6 disk 2, o:1, dev:sdc6 mdadm: /dev/md4 md: md5 stopped. has been started with 3 drives. md: bind md: bind md: bind raid5: device sda7 operational as raid disk 0 raid5: device sdc7 operational as raid disk 2 raid5: device sdb7 operational as raid disk 1 raid5: allocated 3212kB for md5 raid5: raid level 5 set md5 active with 3 out of 3 devices, algorithm 2 RAID5 conf printout: --- rd:3 wd:3 disk 0, o:1, dev:sda7 disk 1, o:1, dev:sdb7 disk 2, o:1, dev:sdc7 mdadm: /dev/md5 md: md6 stopped. has been started with 3 drives. md: bind md: bind md: bind raid5: device sda8 operational as raid disk 0 raid5: device sdc8 operational as raid disk 2 raid5: device sdb8 operational as raid disk 1 raid5: allocated 3212kB for md6 raid5: raid level 5 set md6 active with 3 out of 3 devices, algorithm 2 RAID5 conf printout: --- rd:3 wd:3 disk 0, o:1, dev:sda8 disk 1, o:1, dev:sdb8 disk 2, o:1, dev:sdc8 mdadm: /dev/md6 md: md7 stopped. has been started with 3 drives. md: bind md: bind md: bind raid5: device sda9 operational as raid disk 0 raid5: device sdc9 operational as raid disk 2 raid5: device sdb9 operational as raid disk 1 raid5: allocated 3212kB for md7 raid5: raid level 5 set md7 active with 3 out of 3 devices, algorithm 2 RAID5 conf printout: --- rd:3 wd:3 disk 0, o:1, dev:sda9 disk 1, o:1, dev:sdb9 disk 2, o:1, dev:sdc9 mdadm: /dev/md7 md: md8 stopped. has been started with 3 drives. md: bind md: bind md: bind raid5: device sda10 operational as raid disk 0 raid5: device sdc10 operational as raid disk 2 raid5: device sdb10 operational as raid disk 1 raid5: allocated 3212kB for md8 raid5: raid level 5 set md8 active with 3 out of 3 devices, algorithm 2 RAID5 conf printout: --- rd:3 wd:3 disk 0, o:1, dev:sda10 disk 1, o:1, dev:sdb10 disk 2, o:1, dev:sdc10 mdadm: /dev/md8 has been started with 3 drives. Success: assembled all arrays. Done. Begin: Executing udevtrigger again ... Done. Done. Begin: Running /scripts/local-premount ... kinit: name_to_dAttempting manual resume ev_t(/dev/md1) = md1(9,1) kinit: trying to resume from /dev/md1 kinit: No resume image, doing normal boot... kjournald starting. Commit interval 5 seconds Done. EXT3-fs: mounted filesystem with ordered data mode. Begin: Running /scripts/local-bottom ... Done. Done. Begin: Running /scripts/init-bottom ... Done. Mount failed for selinuxfs on /selinux: No such device ^MINIT: version 2.86 booting^M Starting the hotplug events dispatcher: udevd. Synthesizing the initial hotplug events...done. Waiting for /dev to be fully populated...agpgart: Detected an Intel 965G Chipset. and then hangs. -- Carlo Wood