Hi. On Thursday 21 June 2007 08:09:26 Rafael J. Wysocki wrote: > Hi, > > On Tuesday, 19 June 2007 23:33, Rafael J. Wysocki wrote: > > On Tuesday, 19 June 2007 13:18, Nigel Cunningham wrote: > > > Hi all > > > > > > Here's what I have after today's work. > > > > > > I haven't yet been able to test on x86, but can confirm that it works okay on > > > x86_64. I'm currently working towards testing it on my old Omnibook. My P4 > > > desktop won't resume from suspend to ram at all, and hasn't produced any > > > beeps. > > > > > > I needed to move the BEEP invocation to after the data segment is reloaded, > > > so that the test could access the variable. That was pretty tricky to find - > > > no oops or anything bad prior, it just didn't beep when expected. > > > > > > A couple of notes: > > > > > > - I'd like to put the BEEP macro somewhere that can be shared by x86 32 and > > > 64. If that's a good idea, any suggestions on where? Nothing occurs to me > > > straight off. > > > > I don't know either. I think Andi is the right person to ask (CC added). > > > > > - I've just switched from Evo to Kmail. Please let me know if there's any > > > mangling of the patch. > > Unfortunately, the message is encoded as "quoted printable" which results in > the whitespace being mangled. > > > The patch looks good to me. I'll try to run it on an i386 tomorrow. > > I've recoded it and rediffed against -rc5 with the hibernation and suspend > patchset. The resut is at > > http://www.sisk.pl/kernel/hibernation_and_suspend/2.6.22-rc5/patches/29-Optional-Beeping-During-Resume-From-RAM.patch > > Well, my i386 test box doesn't seem to be able to beep at all. I'll have to > look for another one ... Ok. No success with the Omnibook yet, though I did see it mentioned in Documentation/... as needing a vbepost. Think I found the right option. Does this patch come through better? Nigel arch/i386/kernel/acpi/wakeup.S | 29 ++++++++++++++++++++++++++++- arch/x86_64/kernel/acpi/wakeup.S | 25 +++++++++++++++++++++++++ include/linux/acpi.h | 1 + kernel/power/main.c | 23 +++++++++++++++++++++++ 4 files changed, 77 insertions(+), 1 deletion(-) diff -ruNp 970-str-beep.patch-old/arch/i386/kernel/acpi/wakeup.S 970-str-beep.patch-new/arch/i386/kernel/acpi/wakeup.S --- 970-str-beep.patch-old/arch/i386/kernel/acpi/wakeup.S 2007-06-19 12:15:25.000000000 +1000 +++ 970-str-beep.patch-new/arch/i386/kernel/acpi/wakeup.S 2007-06-19 21:14:49.000000000 +1000 @@ -11,7 +11,22 @@ # # If physical address of wakeup_code is 0x12345, BIOS should call us with # cs = 0x1234, eip = 0x05 -# +# + +#define BEEP \ + inb $97, %al; \ + outb %al, $0x80; \ + movb $3, %al; \ + outb %al, $97; \ + outb %al, $0x80; \ + movb $-74, %al; \ + outb %al, $67; \ + outb %al, $0x80; \ + movb $-119, %al; \ + outb %al, $66; \ + outb %al, $0x80; \ + movb $15, %al; \ + outb %al, $66; ALIGN .align 4096 @@ -31,6 +46,11 @@ wakeup_code: movw %cs, %ax movw %ax, %ds # Make ds:0 point to wakeup_start movw %ax, %ss + + testl $1, beep_flags - wakeup_code + jz 1f + BEEP +1: mov $(wakeup_stack - wakeup_code), %sp # Private stack is needed for ASUS board movw $0x0e00 + 'S', %fs:(0x12) @@ -88,6 +108,10 @@ wakeup_code: cmpl $0x12345678, %eax jne bogus_real_magic + testl $2, beep_flags - wakeup_code + jz 1f + BEEP +1: ljmpl $__KERNEL_CS,$wakeup_pmode_return real_save_gdt: .word 0 @@ -98,6 +122,7 @@ real_save_cr4: .long 0 real_magic: .long 0 video_mode: .long 0 video_flags: .long 0 +beep_flags: .long 0 real_efer_save_restore: .long 0 real_save_efer_edx: .long 0 real_save_efer_eax: .long 0 @@ -261,6 +286,8 @@ ENTRY(acpi_copy_wakeup_routine) movl %edx, video_mode - wakeup_start (%eax) movl acpi_video_flags, %edx movl %edx, video_flags - wakeup_start (%eax) + movl s2ram_beep, %edx + movl %edx, beep_flags - wakeup_start (%eax) movl $0x12345678, real_magic - wakeup_start (%eax) movl $0x12345678, saved_magic ret diff -ruNp 970-str-beep.patch-old/arch/x86_64/kernel/acpi/wakeup.S 970-str-beep.patch-new/arch/x86_64/kernel/acpi/wakeup.S --- 970-str-beep.patch-old/arch/x86_64/kernel/acpi/wakeup.S 2007-06-19 12:15:28.000000000 +1000 +++ 970-str-beep.patch-new/arch/x86_64/kernel/acpi/wakeup.S 2007-06-19 21:14:49.000000000 +1000 @@ -16,6 +16,21 @@ # cs = 0x1234, eip = 0x05 # +#define BEEP \ + inb $97, %al; \ + outb %al, $0x80; \ + movb $3, %al; \ + outb %al, $97; \ + outb %al, $0x80; \ + movb $-74, %al; \ + outb %al, $67; \ + outb %al, $0x80; \ + movb $-119, %al; \ + outb %al, $66; \ + outb %al, $0x80; \ + movb $15, %al; \ + outb %al, $66; + ALIGN .align 16 @@ -33,6 +48,13 @@ wakeup_code: movw %cs, %ax movw %ax, %ds # Make ds:0 point to wakeup_start movw %ax, %ss + + # Data segment must be set up before we can see whether to beep. + testl $1, beep_flags - wakeup_code + jz 1f + BEEP +1: + # Private stack is needed for ASUS board mov $(wakeup_stack - wakeup_code), %sp @@ -229,6 +251,7 @@ gdt_48a: .long gdta - wakeup_code # gdt base (relocated in later) real_magic: .quad 0 +beep_flags: .quad 0 video_mode: .quad 0 video_flags: .quad 0 @@ -344,6 +367,8 @@ ENTRY(acpi_copy_wakeup_routine) pushq %rax pushq %rdx + movl s2ram_beep, %edx + movl %edx, beep_flags - wakeup_start (,%rdi) movl saved_video_mode, %edx movl %edx, video_mode - wakeup_start (,%rdi) movl acpi_video_flags, %edx diff -ruNp 970-str-beep.patch-old/include/linux/acpi.h 970-str-beep.patch-new/include/linux/acpi.h --- 970-str-beep.patch-old/include/linux/acpi.h 2007-06-19 21:15:08.000000000 +1000 +++ 970-str-beep.patch-new/include/linux/acpi.h 2007-06-19 21:14:49.000000000 +1000 @@ -123,6 +123,7 @@ extern int pci_mmcfg_config_num; extern int sbf_port; extern unsigned long acpi_video_flags; +extern unsigned long s2ram_beep; #else /* !CONFIG_ACPI */ diff -ruNp 970-str-beep.patch-old/kernel/power/main.c 970-str-beep.patch-new/kernel/power/main.c --- 970-str-beep.patch-old/kernel/power/main.c 2007-06-19 12:15:55.000000000 +1000 +++ 970-str-beep.patch-new/kernel/power/main.c 2007-06-19 21:14:49.000000000 +1000 @@ -308,6 +308,27 @@ static ssize_t state_store(struct kset * power_attr(state); +unsigned long s2ram_beep = 0; + +static ssize_t s2ram_beep_show(struct kset *kset, char *buf) +{ + return sprintf(buf, "%d\n", s2ram_beep); +} + +static ssize_t +s2ram_beep_store(struct kset *kset, const char *buf, size_t n) +{ + int val; + + if (sscanf(buf, "%d", &val) > 0) { + s2ram_beep = val; + return n; + } + return -EINVAL; +} + +power_attr(s2ram_beep); + #ifdef CONFIG_PM_TRACE int pm_trace_enabled; @@ -333,11 +354,13 @@ power_attr(pm_trace); static struct attribute * g[] = { &state_attr.attr, &pm_trace_attr.attr, + &s2ram_beep_attr.attr, NULL, }; #else static struct attribute * g[] = { &state_attr.attr, + &s2ram_beep_attr.attr, NULL, }; #endif /* CONFIG_PM_TRACE */ -- Nigel, Michelle and Alisdair Cunningham 5 Mitchell Street Cobden 3266 Victoria, Australia