linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bjorn Helgaas <bjorn.helgaas@hp.com>
To: Andrey Borzenkov <arvidjaar@mail.ru>
Cc: Samuel Ortiz <samuel@sortiz.org>,
	"Linus Walleij (LD/EAB)" <linus.walleij@ericsson.com>,
	linux-kernel@vger.kernel.org,
	Michal Piotrowski <michal.k.k.piotrowski@gmail.com>,
	ambx1@neo.rr.com, linux-pcmcia@lists.infradead.org
Subject: Re: 2.6.22-rc: regression: no irda0 interface (2.6.21 was OK), smsc does not find chip
Date: Wed, 27 Jun 2007 21:56:05 -0600	[thread overview]
Message-ID: <200706272156.05865.bjorn.helgaas@hp.com> (raw)
In-Reply-To: <200706191731.24085.bjorn.helgaas@hp.com>

Andrey,

Can you try the following patch?  It applies on top of the previous
two patches, and it is enough to make the driver find the device on
my Portege 4000.  Unfortunately, I can't tell whether it really works
because I don't have a clue about how to make two IR devices talk
to each other.

Bjorn

Index: w/drivers/pnp/quirks.c
===================================================================
--- w.orig/drivers/pnp/quirks.c	2007-06-27 20:07:45.000000000 -0600
+++ w/drivers/pnp/quirks.c	2007-06-27 20:57:47.000000000 -0600
@@ -136,11 +136,11 @@
 
 static void quirk_smc_enable(struct pnp_dev *dev)
 {
-	/*
-	 * If the BIOS left the device disabled, or it is enabled and
-	 * responding correctly, we're in good shape.
-	 */
-	if (!dev->active || quirk_smc_fir_enabled(dev))
+	unsigned int irq;
+	unsigned long flags;
+
+	pnp_activate_dev(dev);
+	if (quirk_smc_fir_enabled(dev))
 		return;
 
 	/*
@@ -159,9 +159,34 @@
 	pnp_init_resource_table(&dev->res);
 	pnp_auto_config_dev(dev);
 	pnp_activate_dev(dev);
+	if (quirk_smc_fir_enabled(dev))
+		return;
+
+	/*
+	 * The Toshiba Portege 4000 reports the IRQ as active high,
+	 * edge-triggered, but the device only seems to work when we
+	 * program it as something else.
+	 */
+	irq = pnp_irq(dev, 0);
+	flags = pnp_irq_flags(dev, 0);
+	pnp_disable_dev(dev);
+	dev->res.irq_resource[0].start = irq;
+	dev->res.irq_resource[0].end   = irq;
+	flags &= ~IORESOURCE_AUTO;
+	if ((flags & IORESOURCE_BITS) == IORESOURCE_IRQ_HIGHEDGE) {
+		flags &= ~IORESOURCE_BITS;
+		flags |= IORESOURCE_IRQ_LOWEDGE;
+		dev_err(&dev->dev, "still not responding, changing high-edge "
+			"IRQ to low-edge\n");
+	}
+	dev->res.irq_resource[0].flags = flags;
+	pnp_activate_dev(dev);
+
+	if (quirk_smc_fir_enabled(dev))
+		return;
 
-	if (!quirk_smc_fir_enabled(dev))
-		dev_err(&dev->dev, "giving up; try \"smsc-ircc2.nopnp\"\n");
+	dev_err(&dev->dev, "giving up; try \"smsc-ircc2.nopnp\" and "
+		"email bjorn.helgaas@hp.com\n");
 }
 
 

  reply	other threads:[~2007-06-28  3:56 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-06-03  8:00 2.6.22-rc: regression: no irda0 interface (2.6.21 was OK), smsc does not find chip Andrey Borzenkov
2007-06-03  8:16 ` Andrey Borzenkov
2007-06-03 23:10   ` Samuel Ortiz
2007-06-04  2:33     ` Andrey Borzenkov
2007-06-04 20:44       ` Samuel Ortiz
2007-06-05  3:10         ` Andrey Borzenkov
2007-06-05  7:18           ` Linus Walleij (LD/EAB)
2007-06-05  7:57             ` Samuel Ortiz
2007-06-05 11:57               ` Linus Walleij (LD/EAB)
2007-06-05 13:04                 ` Samuel Ortiz
2007-06-05 23:23                 ` Bjorn Helgaas
2007-06-06  3:29                   ` Andrey Borzenkov
2007-06-06 19:09                     ` Bjorn Helgaas
2007-06-06 20:45                       ` Andrey Borzenkov
2007-06-07 15:52                         ` Bjorn Helgaas
2007-06-07 20:47                           ` Samuel Ortiz
2007-06-10  6:47                             ` Andrey Borzenkov
2007-06-10 21:03                               ` Bjorn Helgaas
2007-06-11 14:04                                 ` Andrey Borzenkov
2007-06-14 21:30                                   ` Bjorn Helgaas
2007-06-15 13:44                                     ` Andrey Borzenkov
2007-06-15 15:19                                       ` Bjorn Helgaas
2007-06-16 16:38                                         ` Andrey Borzenkov
2007-06-19 23:31                                           ` Bjorn Helgaas
2007-06-28  3:56                                             ` Bjorn Helgaas [this message]
2007-06-30  2:41                                               ` Bjorn Helgaas
2007-06-30  7:16                                                 ` Andrey Borzenkov
2007-06-30 11:45                                                   ` Bjorn Helgaas
2007-06-30 14:47                                                     ` Andrey Borzenkov
2007-06-30 21:13                                                       ` Andrey Borzenkov
2007-07-01  3:30                                                         ` Bjorn Helgaas
2007-07-01  7:08                                                           ` Andrey Borzenkov
2007-07-01 13:57                                                             ` Bjorn Helgaas
2007-08-11 18:39                                                     ` Andrey Borzenkov
2007-08-13 16:09                                                       ` Bjorn Helgaas
2007-08-13 17:39                                                         ` Peter Stuge
2007-08-18  6:59                                                         ` Andrey Borzenkov
2007-07-01  0:01                                                 ` Michal Piotrowski
2007-07-01  0:04                                                   ` Michal Piotrowski
2007-06-07 18:34                         ` Bjorn Helgaas
2007-06-08  5:24                           ` Andrey Borzenkov
2007-06-10  8:03                           ` Andrey Borzenkov
2007-06-10 20:04                             ` Bjorn Helgaas
2007-06-07 12:23                   ` Linus Walleij (LD/EAB)
2007-06-07 15:44                     ` Bjorn Helgaas
2007-06-05 12:06         ` Linus Walleij (LD/EAB)
2007-06-04 16:34   ` Bjorn Helgaas
2007-06-05  3:08     ` Andrey Borzenkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200706272156.05865.bjorn.helgaas@hp.com \
    --to=bjorn.helgaas@hp.com \
    --cc=ambx1@neo.rr.com \
    --cc=arvidjaar@mail.ru \
    --cc=linus.walleij@ericsson.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pcmcia@lists.infradead.org \
    --cc=michal.k.k.piotrowski@gmail.com \
    --cc=samuel@sortiz.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).