[patch 0/3] Per cpu relocation to ZERO and x86_32 percpu ops on x86_64

[patch 0/3] Per cpu relocation to ZERO and x86_32 percpu ops on x86_64

[Christoph Lameter]

This patchset allows the use of x86_32 percpu ops on x86_64 while maintaining
%gs pointing to the pda. It does that by moving the x86_64 pda into
the percpu area (thereby pointing %gs at the per cpu area) and then
relocating the x86_64 per cpu variables to start at 0.

Patch applies on top of the per cpu cleanup patches V2.
See http://marc.info/?l=linux-kernel&m=119628478316525&w=2

Ultimately I think we can make the per cpu accessors arch independent
(see the RFC at http://marc.info/?l=linux-kernel&m=119552126330405&w=2).
There is a performance benefit from using these in core code.

-- 

[patch 1/3] Percpu infrastructure to rebase the per cpu area to 0UL

[Christoph Lameter]

[-- Attachment #1: zero_based_infrastructure --]
[-- Type: text/plain, Size: 5835 bytes --]

Support an option

	CONFIG_PERCPU_ZERO_BASED

that makes offsets for per cpu variables start at zero.

If a percpu area starts at zero then

1. We do not need RELOC_HIDE anymore

2. Indexes off the per cpu area for each processor are small

3. The percpu area "addresses" are offsets and we can then
   have allocpercpu/cpu_alloc in the future also use these
   offsets so that percpu functions can take any type of
   percpu address if it is provided by a percpu variable
   or a pointer obtained via allocpercpu/cpu_alloc.

The linker area boundaries variables are different for zero based
percpu segments:

__per_cpu_load	-> The address at which the percpu area was loaded
__per_cpu_size	-> The length of the per cpu area


Removes the &__per_cpu_x in lockdep. AFAICT The __per_cpu_x are already
pointers.

Signed-off-by: Christoph Lameter <clameter@sgi.com>

---
 include/asm-generic/percpu.h      |    7 ++++++-
 include/asm-generic/sections.h    |   10 ++++++++++
 include/asm-generic/vmlinux.lds.h |   15 +++++++++++++++
 init/main.c                       |   17 +++++++++--------
 kernel/lockdep.c                  |    4 ++--
 5 files changed, 42 insertions(+), 11 deletions(-)

Index: linux-2.6.24-rc3-mm2/include/asm-generic/percpu.h
===================================================================
--- linux-2.6.24-rc3-mm2.orig/include/asm-generic/percpu.h	2007-11-29 22:05:58.359576450 -0800
+++ linux-2.6.24-rc3-mm2/include/asm-generic/percpu.h	2007-11-29 22:06:22.750825804 -0800
@@ -42,8 +42,13 @@ extern unsigned long __per_cpu_offset[NR
  * Only S390 provides its own means of moving the pointer.
  */
 #ifndef SHIFT_PTR
+#ifdef CONFIG_PERCPU_ZERO_BASED
+#define SHIFT_PTR(__p, __offset) \
+	((__typeof(__p))(((void *)(__p)) + (__offset)))
+#else
 #define SHIFT_PTR(__p, __offset)	RELOC_HIDE((__p), (__offset))
-#endif
+#endif /* CONFIG_PER_CPU_ZERO_BASED */
+#endif /* SHIFT_PTR */
 
 /*
  * A percpu variable may point to a discarded reghions. The following are
Index: linux-2.6.24-rc3-mm2/include/asm-generic/sections.h
===================================================================
--- linux-2.6.24-rc3-mm2.orig/include/asm-generic/sections.h	2007-11-29 22:05:58.367576240 -0800
+++ linux-2.6.24-rc3-mm2/include/asm-generic/sections.h	2007-11-29 22:06:22.754826440 -0800
@@ -9,7 +9,17 @@ extern char __bss_start[], __bss_stop[];
 extern char __init_begin[], __init_end[];
 extern char _sinittext[], _einittext[];
 extern char _end[];
+#ifdef CONFIG_PERCPU_ZERO_BASED
+extern char __per_cpu_load[];
+extern char ____per_cpu_size[];
+#define __per_cpu_size ((unsigned long)&____per_cpu_size)
+#define __per_cpu_start ((char *)0)
+#define __per_cpu_end ((char *)__per_cpu_size)
+#else
 extern char __per_cpu_start[], __per_cpu_end[];
+#define __per_cpu_load __per_cpu_start
+#define __per_cpu_size (__per_cpu_end - __per_cpu_start)
+#endif
 extern char __kprobes_text_start[], __kprobes_text_end[];
 extern char __initdata_begin[], __initdata_end[];
 extern char __start_rodata[], __end_rodata[];
Index: linux-2.6.24-rc3-mm2/include/asm-generic/vmlinux.lds.h
===================================================================
--- linux-2.6.24-rc3-mm2.orig/include/asm-generic/vmlinux.lds.h	2007-11-29 22:06:03.486826118 -0800
+++ linux-2.6.24-rc3-mm2/include/asm-generic/vmlinux.lds.h	2007-11-29 22:06:22.754826440 -0800
@@ -255,6 +255,20 @@
   	*(.initcall7.init)						\
   	*(.initcall7s.init)
 
+#ifdef CONFIG_PERCPU_ZERO_BASED
+#define PERCPU(align)							\
+	. = ALIGN(align);						\
+	percpu : { } :percpu						\
+	__per_cpu_load = .;						\
+	.data.percpu 0 : AT(__per_cpu_load - LOAD_OFFSET) {		\
+		*(.data.percpu.first)					\
+		*(.data.percpu)						\
+		*(.data.percpu.shared_aligned)				\
+		____per_cpu_size = .;					\
+	}								\
+	. = __per_cpu_load + ____per_cpu_size;				\
+	data : { } :data
+#else
 #define PERCPU(align)							\
 	. = ALIGN(align);						\
 	__per_cpu_start = .;						\
@@ -263,3 +277,4 @@
 		*(.data.percpu.shared_aligned)				\
 	}								\
 	__per_cpu_end = .;
+#endif
Index: linux-2.6.24-rc3-mm2/init/main.c
===================================================================
--- linux-2.6.24-rc3-mm2.orig/init/main.c	2007-11-29 22:06:01.607326159 -0800
+++ linux-2.6.24-rc3-mm2/init/main.c	2007-11-29 22:06:22.754826440 -0800
@@ -370,18 +370,19 @@ EXPORT_SYMBOL(__per_cpu_offset);
 
 static void __init setup_per_cpu_areas(void)
 {
-	unsigned long size, i;
-	char *ptr;
-	unsigned long nr_possible_cpus = num_possible_cpus();
+	unsigned long size;
+	int cpu;
 
 	/* Copy section for each CPU (we discard the original) */
 	size = ALIGN(PERCPU_ENOUGH_ROOM, PAGE_SIZE);
-	ptr = alloc_bootmem_pages(size * nr_possible_cpus);
 
-	for_each_possible_cpu(i) {
-		__per_cpu_offset[i] = ptr - __per_cpu_start;
-		memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
-		ptr += size;
+	for_each_possible_cpu(cpu) {
+		char *ptr;
+
+		ptr = alloc_bootmem_pages_node(NODE_DATA(cpu_to_node(cpu)),
+								size);
+		__per_cpu_offset[cpu] = ptr - __per_cpu_start;
+		memcpy(ptr, __per_cpu_load, __per_cpu_size);
 	}
 }
 #endif /* CONFIG_ARCH_SETS_UP_CPU_AREA */
Index: linux-2.6.24-rc3-mm2/kernel/lockdep.c
===================================================================
--- linux-2.6.24-rc3-mm2.orig/kernel/lockdep.c	2007-11-29 22:05:58.391576218 -0800
+++ linux-2.6.24-rc3-mm2/kernel/lockdep.c	2007-11-29 22:06:22.754826440 -0800
@@ -613,8 +613,8 @@ static int static_obj(void *obj)
 	 * percpu var?
 	 */
 	for_each_possible_cpu(i) {
-		start = (unsigned long) &__per_cpu_start + per_cpu_offset(i);
-		end   = (unsigned long) &__per_cpu_start + PERCPU_ENOUGH_ROOM
+		start = (unsigned long) __per_cpu_start + per_cpu_offset(i);
+		end   = (unsigned long) __per_cpu_start + PERCPU_ENOUGH_ROOM
 					+ per_cpu_offset(i);
 
 		if ((addr >= start) && (addr < end))

-- 

[patch 2/3] X86_64: Declare pda as per cpu data thereby moving it into the cpu area

[Christoph Lameter]

[-- Attachment #1: x86_64_fold_pda --]
[-- Type: text/plain, Size: 5434 bytes --]

Declare the pda as a per cpu variable. This will have the effect of moving
the pda data into the cpu area managed by cpu alloc.

The boot_pdas are only needed in head64.c so move the declaration
over there and make it static.

Remove the code that allocates special pda data structures.

The pda is moved to the beginning of the per cpu area. gs is pointing to the
pda. And therefore gs: is now pointing to the per cpu area of the current
processor. A per cpu variable can then be reached at

%gs:[&per_cpu_xxxx - __per_cpu_start]

Signed-off-by: Christoph Lameter <clameter@sgi.com>

---
 arch/x86/kernel/head64.c          |    6 ++++++
 arch/x86/kernel/setup64.c         |   13 ++++++++++---
 arch/x86/kernel/smpboot_64.c      |   16 ----------------
 include/asm-generic/vmlinux.lds.h |    1 +
 include/asm-x86/pda.h             |    1 -
 include/linux/percpu.h            |    4 ++++
 6 files changed, 21 insertions(+), 20 deletions(-)

Index: linux-2.6.24-rc3-mm2/arch/x86/kernel/setup64.c
===================================================================
--- linux-2.6.24-rc3-mm2.orig/arch/x86/kernel/setup64.c	2007-11-28 20:59:13.124188194 -0800
+++ linux-2.6.24-rc3-mm2/arch/x86/kernel/setup64.c	2007-11-28 21:08:50.473347382 -0800
@@ -30,7 +30,9 @@ cpumask_t cpu_initialized __cpuinitdata 
 
 struct x8664_pda *_cpu_pda[NR_CPUS] __read_mostly;
 EXPORT_SYMBOL(_cpu_pda);
-struct x8664_pda boot_cpu_pda[NR_CPUS] __cacheline_aligned;
+
+DEFINE_PER_CPU_FIRST(struct x8664_pda, pda);
+EXPORT_PER_CPU_SYMBOL(pda);
 
 struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table };
 
@@ -109,10 +111,15 @@ void __init setup_per_cpu_areas(void)
 		}
 		if (!ptr)
 			panic("Cannot allocate cpu data for CPU %d\n", i);
-		cpu_pda(i)->data_offset = ptr - __per_cpu_start;
 		memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
+		/* Relocate the pda */
+		memcpy(ptr, cpu_pda(i), sizeof(struct x8664_pda));
+		cpu_pda(i) = (struct x8664_pda *)ptr;
+		cpu_pda(i)->data_offset = ptr - __per_cpu_start;
 	}
-} 
+	/* Fix up pda for this processor .... */
+	pda_init(0);
+}
 
 void pda_init(int cpu)
 { 
Index: linux-2.6.24-rc3-mm2/arch/x86/kernel/smpboot_64.c
===================================================================
--- linux-2.6.24-rc3-mm2.orig/arch/x86/kernel/smpboot_64.c	2007-11-28 20:59:13.136188167 -0800
+++ linux-2.6.24-rc3-mm2/arch/x86/kernel/smpboot_64.c	2007-11-28 20:59:35.399937395 -0800
@@ -556,22 +556,6 @@ static int __cpuinit do_boot_cpu(int cpu
 		return -1;
 	}
 
-	/* Allocate node local memory for AP pdas */
-	if (cpu_pda(cpu) == &boot_cpu_pda[cpu]) {
-		struct x8664_pda *newpda, *pda;
-		int node = cpu_to_node(cpu);
-		pda = cpu_pda(cpu);
-		newpda = kmalloc_node(sizeof (struct x8664_pda), GFP_ATOMIC,
-				      node);
-		if (newpda) {
-			memcpy(newpda, pda, sizeof (struct x8664_pda));
-			cpu_pda(cpu) = newpda;
-		} else
-			printk(KERN_ERR
-		"Could not allocate node local PDA for CPU %d on node %d\n",
-				cpu, node);
-	}
-
 	alternatives_smp_switch(1);
 
 	c_idle.idle = get_idle_for_cpu(cpu);
Index: linux-2.6.24-rc3-mm2/arch/x86/kernel/head64.c
===================================================================
--- linux-2.6.24-rc3-mm2.orig/arch/x86/kernel/head64.c	2007-11-28 20:59:13.152187359 -0800
+++ linux-2.6.24-rc3-mm2/arch/x86/kernel/head64.c	2007-11-28 20:59:35.403937534 -0800
@@ -22,6 +22,12 @@
 #include <asm/sections.h>
 #include <asm/kdebug.h>
 
+/*
+ * Only used before the per cpu areas are setup. The use for the non possible
+ * cpus continues after boot
+ */
+static struct x8664_pda boot_cpu_pda[NR_CPUS] __cacheline_aligned;
+
 static void __init zap_identity_mappings(void)
 {
 	pgd_t *pgd = pgd_offset_k(0UL);
Index: linux-2.6.24-rc3-mm2/include/asm-x86/pda.h
===================================================================
--- linux-2.6.24-rc3-mm2.orig/include/asm-x86/pda.h	2007-11-28 20:59:13.164187921 -0800
+++ linux-2.6.24-rc3-mm2/include/asm-x86/pda.h	2007-11-28 20:59:35.403937534 -0800
@@ -39,7 +39,6 @@ struct x8664_pda {
 } ____cacheline_aligned_in_smp;
 
 extern struct x8664_pda *_cpu_pda[];
-extern struct x8664_pda boot_cpu_pda[];
 extern void pda_init(int);
 
 #define cpu_pda(i) (_cpu_pda[i])
Index: linux-2.6.24-rc3-mm2/include/asm-generic/vmlinux.lds.h
===================================================================
--- linux-2.6.24-rc3-mm2.orig/include/asm-generic/vmlinux.lds.h	2007-11-28 20:59:13.176187886 -0800
+++ linux-2.6.24-rc3-mm2/include/asm-generic/vmlinux.lds.h	2007-11-28 20:59:35.403937534 -0800
@@ -259,6 +259,7 @@
 	. = ALIGN(align);						\
 	__per_cpu_start = .;						\
 	.data.percpu  : AT(ADDR(.data.percpu) - LOAD_OFFSET) {		\
+		*(.data.percpu.first)					\
 		*(.data.percpu)						\
 		*(.data.percpu.shared_aligned)				\
 	}								\
Index: linux-2.6.24-rc3-mm2/include/linux/percpu.h
===================================================================
--- linux-2.6.24-rc3-mm2.orig/include/linux/percpu.h	2007-11-28 20:59:13.188187940 -0800
+++ linux-2.6.24-rc3-mm2/include/linux/percpu.h	2007-11-28 21:09:23.399307556 -0800
@@ -23,6 +23,10 @@
 	DEFINE_PER_CPU(type, name)
 #endif
 
+#define DEFINE_PER_CPU_FIRST(type, name)				\
+	__attribute__((__section__(".data.percpu.first")))		\
+	PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
+
 #define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
 #define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
 

-- 

[patch 3/3] x86_64: Make the x86_32 percpu operations usable on x86_64

[Christoph Lameter]

[-- Attachment #1: x86_64_rebase_compat --]
[-- Type: text/plain, Size: 3798 bytes --]

Relocate the x86_64 percpu variables to begin at zero. Then
we can directly use the x86_32 percpu operations. x86_32
offsets %fs by __per_cpu_start. x86_64 has %gs pointing
directly to the pda and the per cpu area if they start at zero.

Access to the pda with the x86_64 pda operations is still
possible in addition to access to the per cpu variables
using x86_32 percpu operations.

Hopefully this is helpful for arch integration.

Signed-off-by: Christoph Lameter <clameter@sgi.com>

---
 arch/x86/Kconfig                 |    5 +++++
 arch/x86/kernel/setup64.c        |    4 ++--
 arch/x86/kernel/vmlinux_64.lds.S |    1 +
 include/asm-x86/percpu.h         |   12 +++++++++++-
 4 files changed, 19 insertions(+), 3 deletions(-)

Index: linux-2.6.24-rc3-mm2/include/asm-x86/percpu.h
===================================================================
--- linux-2.6.24-rc3-mm2.orig/include/asm-x86/percpu.h	2007-11-29 22:13:54.806575787 -0800
+++ linux-2.6.24-rc3-mm2/include/asm-x86/percpu.h	2007-11-29 22:21:42.383571603 -0800
@@ -17,6 +17,12 @@
 
 #define per_cpu_offset(x) (__per_cpu_offset(x))
 
+#define __percpu_seg "%%gs:"
+
+#else
+
+#define __percpu_seg ""
+
 #endif
 #include <asm-generic/percpu.h>
 
@@ -81,6 +87,11 @@ DECLARE_PER_CPU(struct x8664_pda, pda);
 /* We can use this directly for local CPU (faster). */
 DECLARE_PER_CPU(unsigned long, this_cpu_off);
 
+#endif /* __ASSEMBLY__ */
+#endif /* !CONFIG_X86_64 */
+
+#ifndef __ASSEMBLY__
+
 /* For arch-specific code, we can use direct single-insn ops (they
  * don't give an lvalue though). */
 extern void __bad_percpu_size(void);
@@ -138,5 +149,4 @@ extern void __bad_percpu_size(void);
 #define x86_sub_percpu(var,val) percpu_to_op("sub", per_cpu__##var, val)
 #define x86_or_percpu(var,val) percpu_to_op("or", per_cpu__##var, val)
 #endif /* !__ASSEMBLY__ */
-#endif /* !CONFIG_X86_64 */
 #endif /* _ASM_X86_PERCPU_H_ */
Index: linux-2.6.24-rc3-mm2/arch/x86/Kconfig
===================================================================
--- linux-2.6.24-rc3-mm2.orig/arch/x86/Kconfig	2007-11-29 22:05:39.003576212 -0800
+++ linux-2.6.24-rc3-mm2/arch/x86/Kconfig	2007-11-29 22:12:53.942575452 -0800
@@ -123,6 +123,11 @@ config GENERIC_TIME_VSYSCALL
 config ARCH_SETS_UP_PER_CPU_AREA
 	def_bool X86_64
 
+config PERCPU_ZERO_BASED
+	bool
+	depends on X86_64 && SMP
+	default y
+
 config ZONE_DMA32
 	bool
 	default X86_64
Index: linux-2.6.24-rc3-mm2/arch/x86/kernel/setup64.c
===================================================================
--- linux-2.6.24-rc3-mm2.orig/arch/x86/kernel/setup64.c	2007-11-29 22:12:08.962826086 -0800
+++ linux-2.6.24-rc3-mm2/arch/x86/kernel/setup64.c	2007-11-29 22:12:53.942575452 -0800
@@ -111,11 +111,11 @@ void __init setup_per_cpu_areas(void)
 		}
 		if (!ptr)
 			panic("Cannot allocate cpu data for CPU %d\n", i);
-		memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
+		memcpy(ptr, __per_cpu_load, __per_cpu_size);
 		/* Relocate the pda */
 		memcpy(ptr, cpu_pda(i), sizeof(struct x8664_pda));
 		cpu_pda(i) = (struct x8664_pda *)ptr;
-		cpu_pda(i)->data_offset = ptr - __per_cpu_start;
+		cpu_pda(i)->data_offset = (unsigned long)ptr;
 	}
 	/* Fix up pda for this processor .... */
 	pda_init(0);
Index: linux-2.6.24-rc3-mm2/arch/x86/kernel/vmlinux_64.lds.S
===================================================================
--- linux-2.6.24-rc3-mm2.orig/arch/x86/kernel/vmlinux_64.lds.S	2007-11-29 22:05:38.987576338 -0800
+++ linux-2.6.24-rc3-mm2/arch/x86/kernel/vmlinux_64.lds.S	2007-11-29 22:12:53.930825752 -0800
@@ -16,6 +16,7 @@ jiffies_64 = jiffies;
 _proxy_pda = 1;
 PHDRS {
 	text PT_LOAD FLAGS(5);	/* R_E */
+	percpu PT_LOAD FLAGS(4);	/* R__ */
 	data PT_LOAD FLAGS(7);	/* RWE */
 	user PT_LOAD FLAGS(7);	/* RWE */
 	data.init PT_LOAD FLAGS(7);	/* RWE */

-- 

Re: [patch 0/3] Per cpu relocation to ZERO and x86_32 percpu ops on x86_64

[Ingo Molnar]

* Christoph Lameter <clameter@sgi.com> wrote:

> This patchset allows the use of x86_32 percpu ops on x86_64 while 
> maintaining %gs pointing to the pda. It does that by moving the x86_64 
> pda into the percpu area (thereby pointing %gs at the per cpu area) 
> and then relocating the x86_64 per cpu variables to start at 0.
> 
> Patch applies on top of the per cpu cleanup patches V2. See 
> http://marc.info/?l=linux-kernel&m=119628478316525&w=2
> 
> Ultimately I think we can make the per cpu accessors arch independent 
> (see the RFC at 
> http://marc.info/?l=linux-kernel&m=119552126330405&w=2). There is a 
> performance benefit from using these in core code.

i've picked up your cleanup series and this relocation series as well, 
but it crashed on x86 32-bit UP, with:

 [   78.692936] Freeing unused kernel memory: 656k freed
 [   78.697750] BUG: spinlock wrong owner on CPU#0, /0�

(no other messages, hard lockup)

find below my manual merge against x86.git, maybe i made some merging 
mistake. x86.git can be picked up via:

 git-pull git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git mm

	Ingo

-------------------->
Index: linux-x86.q/arch/ia64/Kconfig
===================================================================
--- linux-x86.q.orig/arch/ia64/Kconfig
+++ linux-x86.q/arch/ia64/Kconfig
@@ -75,6 +75,9 @@ config GENERIC_TIME_VSYSCALL
 	bool
 	default y
 
+config ARCH_SETS_UP_PER_CPU_AREA
+	def_bool y
+
 config DMI
 	bool
 	default y
Index: linux-x86.q/arch/powerpc/Kconfig
===================================================================
--- linux-x86.q.orig/arch/powerpc/Kconfig
+++ linux-x86.q/arch/powerpc/Kconfig
@@ -42,6 +42,9 @@ config GENERIC_HARDIRQS
 	bool
 	default y
 
+config ARCH_SETS_UP_PER_CPU_AREA
+	def_bool PPC64
+
 config IRQ_PER_CPU
 	bool
 	default y
Index: linux-x86.q/arch/sparc64/Kconfig
===================================================================
--- linux-x86.q.orig/arch/sparc64/Kconfig
+++ linux-x86.q/arch/sparc64/Kconfig
@@ -66,6 +66,9 @@ config AUDIT_ARCH
 	bool
 	default y
 
+config ARCH_SETS_UP_PER_CPU_AREA
+	def_bool y
+
 config ARCH_NO_VIRT_TO_BUS
 	def_bool y
 
Index: linux-x86.q/arch/sparc64/mm/init.c
===================================================================
--- linux-x86.q.orig/arch/sparc64/mm/init.c
+++ linux-x86.q/arch/sparc64/mm/init.c
@@ -1323,6 +1323,11 @@ pgd_t swapper_pg_dir[2048];
 static void sun4u_pgprot_init(void);
 static void sun4v_pgprot_init(void);
 
+/* Dummy function */
+void __init setup_per_cpu_areas(void)
+{
+}
+
 void __init paging_init(void)
 {
 	unsigned long end_pfn, pages_avail, shift, phys_base;
Index: linux-x86.q/arch/x86/Kconfig
===================================================================
--- linux-x86.q.orig/arch/x86/Kconfig
+++ linux-x86.q/arch/x86/Kconfig
@@ -116,9 +116,13 @@ config GENERIC_TIME_VSYSCALL
 	bool
 	default X86_64
 
+config ARCH_SETS_UP_PER_CPU_AREA
+	def_bool X86_64
 
-
-
+config PERCPU_ZERO_BASED
+	bool
+	depends on X86_64 && SMP
+	default y
 
 config ZONE_DMA32
 	bool
Index: linux-x86.q/arch/x86/kernel/head64.c
===================================================================
--- linux-x86.q.orig/arch/x86/kernel/head64.c
+++ linux-x86.q/arch/x86/kernel/head64.c
@@ -22,6 +22,12 @@
 #include <asm/sections.h>
 #include <asm/kdebug.h>
 
+/*
+ * Only used before the per cpu areas are setup. The use for the non possible
+ * cpus continues after boot
+ */
+static struct x8664_pda boot_cpu_pda[NR_CPUS] __cacheline_aligned;
+
 static void __init zap_identity_mappings(void)
 {
 	pgd_t *pgd = pgd_offset_k(0UL);
Index: linux-x86.q/arch/x86/kernel/setup64.c
===================================================================
--- linux-x86.q.orig/arch/x86/kernel/setup64.c
+++ linux-x86.q/arch/x86/kernel/setup64.c
@@ -30,7 +30,9 @@ cpumask_t cpu_initialized __cpuinitdata 
 
 struct x8664_pda *_cpu_pda[NR_CPUS] __read_mostly;
 EXPORT_SYMBOL(_cpu_pda);
-struct x8664_pda boot_cpu_pda[NR_CPUS] __cacheline_aligned;
+
+DEFINE_PER_CPU_FIRST(struct x8664_pda, pda);
+EXPORT_PER_CPU_SYMBOL(pda);
 
 struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table };
 
@@ -109,10 +111,15 @@ void __init setup_per_cpu_areas(void)
 		}
 		if (!ptr)
 			panic("Cannot allocate cpu data for CPU %d\n", i);
-		cpu_pda(i)->data_offset = ptr - __per_cpu_start;
-		memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
+		memcpy(ptr, __per_cpu_load, __per_cpu_size);
+		/* Relocate the pda */
+		memcpy(ptr, cpu_pda(i), sizeof(struct x8664_pda));
+		cpu_pda(i) = (struct x8664_pda *)ptr;
+		cpu_pda(i)->data_offset = (unsigned long)ptr;
 	}
-} 
+	/* Fix up pda for this processor .... */
+	pda_init(0);
+}
 
 void pda_init(int cpu)
 { 
Index: linux-x86.q/arch/x86/kernel/smpboot_64.c
===================================================================
--- linux-x86.q.orig/arch/x86/kernel/smpboot_64.c
+++ linux-x86.q/arch/x86/kernel/smpboot_64.c
@@ -556,22 +556,6 @@ static int __cpuinit do_boot_cpu(int cpu
 		return -1;
 	}
 
-	/* Allocate node local memory for AP pdas */
-	if (cpu_pda(cpu) == &boot_cpu_pda[cpu]) {
-		struct x8664_pda *newpda, *pda;
-		int node = cpu_to_node(cpu);
-		pda = cpu_pda(cpu);
-		newpda = kmalloc_node(sizeof (struct x8664_pda), GFP_ATOMIC,
-				      node);
-		if (newpda) {
-			memcpy(newpda, pda, sizeof (struct x8664_pda));
-			cpu_pda(cpu) = newpda;
-		} else
-			printk(KERN_ERR
-		"Could not allocate node local PDA for CPU %d on node %d\n",
-				cpu, node);
-	}
-
 	alternatives_smp_switch(1);
 
 	c_idle.idle = get_idle_for_cpu(cpu);
Index: linux-x86.q/arch/x86/kernel/vmlinux_64.lds.S
===================================================================
--- linux-x86.q.orig/arch/x86/kernel/vmlinux_64.lds.S
+++ linux-x86.q/arch/x86/kernel/vmlinux_64.lds.S
@@ -16,6 +16,7 @@ jiffies_64 = jiffies;
 _proxy_pda = 1;
 PHDRS {
 	text PT_LOAD FLAGS(5);	/* R_E */
+	percpu PT_LOAD FLAGS(4);	/* R__ */
 	data PT_LOAD FLAGS(7);	/* RWE */
 	user PT_LOAD FLAGS(7);	/* RWE */
 	data.init PT_LOAD FLAGS(7);	/* RWE */
Index: linux-x86.q/include/asm-generic/percpu.h
===================================================================
--- linux-x86.q.orig/include/asm-generic/percpu.h
+++ linux-x86.q/include/asm-generic/percpu.h
@@ -3,28 +3,65 @@
 #include <linux/compiler.h>
 #include <linux/threads.h>
 
-#define __GENERIC_PER_CPU
+/*
+ * Determine the real variable name from the name visible in the
+ * kernel sources.
+ */
+#define per_cpu_var(var) per_cpu__##var
+
 #ifdef CONFIG_SMP
 
+/*
+ * per_cpu_offset() is the offset that has to be added to a
+ * percpu variable to get to the instance for a certain processor.
+ *
+ * Most arches use the __per_cpu_offset array for those offsets but
+ * some arches have their own ways of determining the offset (x86_64, s390).
+ */
+#ifndef __per_cpu_offset
 extern unsigned long __per_cpu_offset[NR_CPUS];
-
 #define per_cpu_offset(x) (__per_cpu_offset[x])
+#endif
 
-/* Separate out the type, so (int[3], foo) works. */
-#define DEFINE_PER_CPU(type, name) \
-    __attribute__((__section__(".data.percpu"))) __typeof__(type) per_cpu__##name
-
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name)		\
-    __attribute__((__section__(".data.percpu.shared_aligned"))) \
-    __typeof__(type) per_cpu__##name				\
-    ____cacheline_aligned_in_smp
-
-/* var is in discarded region: offset to particular copy we want */
-#define per_cpu(var, cpu) (*({				\
-	extern int simple_identifier_##var(void);	\
-	RELOC_HIDE(&per_cpu__##var, __per_cpu_offset[cpu]); }))
-#define __get_cpu_var(var) per_cpu(var, smp_processor_id())
-#define __raw_get_cpu_var(var) per_cpu(var, raw_smp_processor_id())
+/*
+ * Determine the offset for the currently active processor.
+ * An arch may define __my_cpu_offset to provide a more effective
+ * means of obtaining the offset to the per cpu variables of the
+ * current processor.
+ */
+#ifndef __my_cpu_offset
+#define __my_cpu_offset per_cpu_offset(raw_smp_processor_id())
+#define my_cpu_offset per_cpu_offset(smp_processor_id())
+#else
+#define my_cpu_offset __my_cpu_offset
+#endif
+
+/*
+ * Add a offset to a pointer but keep the pointer as is.
+ *
+ * Only S390 provides its own means of moving the pointer.
+ */
+#ifndef SHIFT_PTR
+#ifdef CONFIG_PERCPU_ZERO_BASED
+#define SHIFT_PTR(__p, __offset) \
+	((__typeof(__p))(((void *)(__p)) + (__offset)))
+#else
+#define SHIFT_PTR(__p, __offset)	RELOC_HIDE((__p), (__offset))
+#endif /* CONFIG_PER_CPU_ZERO_BASED */
+#endif /* SHIFT_PTR */
+
+/*
+ * A percpu variable may point to a discarded reghions. The following are
+ * established ways to produce a usable pointer from the percpu variable
+ * offset.
+ */
+#define per_cpu(var, cpu) (*SHIFT_PTR(&per_cpu_var(var), per_cpu_offset(cpu)))
+#define __get_cpu_var(var) (*SHIFT_PTR(&per_cpu_var(var), my_cpu_offset))
+#define __raw_get_cpu_var(var) (*SHIFT_PTR(&per_cpu_var(var), __my_cpu_offset))
+
+#ifdef CONFIG_ARCH_SETS_UP_PER_CPU_AREA
+extern void setup_per_cpu_areas(void);
+#endif
 
 /* A macro to avoid #include hell... */
 #define percpu_modcopy(pcpudst, src, size)			\
@@ -36,21 +73,17 @@ do {								\
 } while (0)
 #else /* ! SMP */
 
-#define DEFINE_PER_CPU(type, name) \
-    __typeof__(type) per_cpu__##name
-
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name)	\
-    DEFINE_PER_CPU(type, name)
-
-#define per_cpu(var, cpu)			(*((void)(cpu), &per_cpu__##var))
-#define __get_cpu_var(var)			per_cpu__##var
-#define __raw_get_cpu_var(var)			per_cpu__##var
+#define per_cpu(var, cpu)			(*((void)(cpu), &per_cpu_var(var)))
+#define __get_cpu_var(var)			per_cpu_var(var)
+#define __raw_get_cpu_var(var)			per_cpu_var(var)
 
 #endif	/* SMP */
 
-#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu__##name
+#ifndef PER_CPU_ATTRIBUTES
+#define PER_CPU_ATTRIBUTES
+#endif
 
-#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
-#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
+#define DECLARE_PER_CPU(type, name) extern PER_CPU_ATTRIBUTES \
+					__typeof__(type) per_cpu_var(name)
 
 #endif /* _ASM_GENERIC_PERCPU_H_ */
Index: linux-x86.q/include/asm-generic/sections.h
===================================================================
--- linux-x86.q.orig/include/asm-generic/sections.h
+++ linux-x86.q/include/asm-generic/sections.h
@@ -11,7 +11,17 @@ extern char _sinittext[], _einittext[];
 extern char _sextratext[] __attribute__((weak));
 extern char _eextratext[] __attribute__((weak));
 extern char _end[];
+#ifdef CONFIG_PERCPU_ZERO_BASED
+extern char __per_cpu_load[];
+extern char ____per_cpu_size[];
+#define __per_cpu_size ((unsigned long)&____per_cpu_size)
+#define __per_cpu_start ((char *)0)
+#define __per_cpu_end ((char *)__per_cpu_size)
+#else
 extern char __per_cpu_start[], __per_cpu_end[];
+#define __per_cpu_load __per_cpu_start
+#define __per_cpu_size (__per_cpu_end - __per_cpu_start)
+#endif
 extern char __kprobes_text_start[], __kprobes_text_end[];
 extern char __initdata_begin[], __initdata_end[];
 extern char __start_rodata[], __end_rodata[];
Index: linux-x86.q/include/asm-generic/vmlinux.lds.h
===================================================================
--- linux-x86.q.orig/include/asm-generic/vmlinux.lds.h
+++ linux-x86.q/include/asm-generic/vmlinux.lds.h
@@ -255,11 +255,27 @@
   	*(.initcall7.init)						\
   	*(.initcall7s.init)
 
+#ifdef CONFIG_PERCPU_ZERO_BASED
+#define PERCPU(align)							\
+	. = ALIGN(align);						\
+	percpu : { } :percpu						\
+	__per_cpu_load = .;						\
+	.data.percpu 0 : AT(__per_cpu_load - LOAD_OFFSET) {		\
+		*(.data.percpu.first)					\
+		*(.data.percpu)						\
+		*(.data.percpu.shared_aligned)				\
+		____per_cpu_size = .;					\
+	}								\
+	. = __per_cpu_load + ____per_cpu_size;				\
+	data : { } :data
+#else
 #define PERCPU(align)							\
 	. = ALIGN(align);						\
 	__per_cpu_start = .;						\
 	.data.percpu  : AT(ADDR(.data.percpu) - LOAD_OFFSET) {		\
+		*(.data.percpu.first)					\
 		*(.data.percpu)						\
 		*(.data.percpu.shared_aligned)				\
 	}								\
 	__per_cpu_end = .;
+#endif
Index: linux-x86.q/include/asm-ia64/percpu.h
===================================================================
--- linux-x86.q.orig/include/asm-ia64/percpu.h
+++ linux-x86.q/include/asm-ia64/percpu.h
@@ -12,31 +12,10 @@
 # define THIS_CPU(var)	(per_cpu__##var)  /* use this to mark accesses to per-CPU variables... */
 #else /* !__ASSEMBLY__ */
 
-
 #include <linux/threads.h>
 
 #ifdef HAVE_MODEL_SMALL_ATTRIBUTE
-# define __SMALL_ADDR_AREA	__attribute__((__model__ (__small__)))
-#else
-# define __SMALL_ADDR_AREA
-#endif
-
-#define DECLARE_PER_CPU(type, name)				\
-	extern __SMALL_ADDR_AREA __typeof__(type) per_cpu__##name
-
-/* Separate out the type, so (int[3], foo) works. */
-#define DEFINE_PER_CPU(type, name)				\
-	__attribute__((__section__(".data.percpu")))		\
-	__SMALL_ADDR_AREA __typeof__(type) per_cpu__##name
-
-#ifdef CONFIG_SMP
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name)			\
-	__attribute__((__section__(".data.percpu.shared_aligned")))	\
-	__SMALL_ADDR_AREA __typeof__(type) per_cpu__##name		\
-	____cacheline_aligned_in_smp
-#else
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name)	\
-	DEFINE_PER_CPU(type, name)
+# define PER_CPU_ATTRIBUTES	__attribute__((__model__ (__small__)))
 #endif
 
 /*
@@ -45,39 +24,29 @@
  */
 #ifdef CONFIG_SMP
 
-extern unsigned long __per_cpu_offset[NR_CPUS];
-#define per_cpu_offset(x) (__per_cpu_offset[x])
-
-/* Equal to __per_cpu_offset[smp_processor_id()], but faster to access: */
-DECLARE_PER_CPU(unsigned long, local_per_cpu_offset);
-
-#define per_cpu(var, cpu)  (*RELOC_HIDE(&per_cpu__##var, __per_cpu_offset[cpu]))
-#define __get_cpu_var(var) (*RELOC_HIDE(&per_cpu__##var, __ia64_per_cpu_var(local_per_cpu_offset)))
-#define __raw_get_cpu_var(var) (*RELOC_HIDE(&per_cpu__##var, __ia64_per_cpu_var(local_per_cpu_offset)))
+#define __my_cpu_offset	__ia64_per_cpu_var(local_per_cpu_offset)
 
 extern void percpu_modcopy(void *pcpudst, const void *src, unsigned long size);
-extern void setup_per_cpu_areas (void);
 extern void *per_cpu_init(void);
 
 #else /* ! SMP */
 
-#define per_cpu(var, cpu)			(*((void)(cpu), &per_cpu__##var))
-#define __get_cpu_var(var)			per_cpu__##var
-#define __raw_get_cpu_var(var)			per_cpu__##var
 #define per_cpu_init()				(__phys_per_cpu_start)
 
 #endif	/* SMP */
 
-#define EXPORT_PER_CPU_SYMBOL(var)		EXPORT_SYMBOL(per_cpu__##var)
-#define EXPORT_PER_CPU_SYMBOL_GPL(var)		EXPORT_SYMBOL_GPL(per_cpu__##var)
-
 /*
  * Be extremely careful when taking the address of this variable!  Due to virtual
  * remapping, it is different from the canonical address returned by __get_cpu_var(var)!
  * On the positive side, using __ia64_per_cpu_var() instead of __get_cpu_var() is slightly
  * more efficient.
  */
-#define __ia64_per_cpu_var(var)	(per_cpu__##var)
+#define __ia64_per_cpu_var(var)	per_cpu__##var
+
+#include <asm-generic/percpu.h>
+
+/* Equal to __per_cpu_offset[smp_processor_id()], but faster to access: */
+DECLARE_PER_CPU(unsigned long, local_per_cpu_offset);
 
 #endif /* !__ASSEMBLY__ */
 
Index: linux-x86.q/include/asm-powerpc/percpu.h
===================================================================
--- linux-x86.q.orig/include/asm-powerpc/percpu.h
+++ linux-x86.q/include/asm-powerpc/percpu.h
@@ -16,20 +16,6 @@
 #define __my_cpu_offset() get_paca()->data_offset
 #define per_cpu_offset(x) (__per_cpu_offset(x))
 
-/* Separate out the type, so (int[3], foo) works. */
-#define DEFINE_PER_CPU(type, name) \
-    __attribute__((__section__(".data.percpu"))) __typeof__(type) per_cpu__##name
-
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name)		\
-    __attribute__((__section__(".data.percpu.shared_aligned"))) \
-    __typeof__(type) per_cpu__##name				\
-    ____cacheline_aligned_in_smp
-
-/* var is in discarded region: offset to particular copy we want */
-#define per_cpu(var, cpu) (*RELOC_HIDE(&per_cpu__##var, __per_cpu_offset(cpu)))
-#define __get_cpu_var(var) (*RELOC_HIDE(&per_cpu__##var, __my_cpu_offset()))
-#define __raw_get_cpu_var(var) (*RELOC_HIDE(&per_cpu__##var, local_paca->data_offset))
-
 /* A macro to avoid #include hell... */
 #define percpu_modcopy(pcpudst, src, size)			\
 do {								\
@@ -39,28 +25,7 @@ do {								\
 		       (src), (size));				\
 } while (0)
 
-extern void setup_per_cpu_areas(void);
-
-#else /* ! SMP */
-
-#define DEFINE_PER_CPU(type, name) \
-    __typeof__(type) per_cpu__##name
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name)	\
-    DEFINE_PER_CPU(type, name)
-
-#define per_cpu(var, cpu)			(*((void)(cpu), &per_cpu__##var))
-#define __get_cpu_var(var)			per_cpu__##var
-#define __raw_get_cpu_var(var)			per_cpu__##var
-
 #endif	/* SMP */
-
-#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu__##name
-
-#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
-#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
-
-#else
-#include <asm-generic/percpu.h>
 #endif
-
+#include <asm-generic/percpu.h>
 #endif /* _ASM_POWERPC_PERCPU_H_ */
Index: linux-x86.q/include/asm-s390/percpu.h
===================================================================
--- linux-x86.q.orig/include/asm-s390/percpu.h
+++ linux-x86.q/include/asm-s390/percpu.h
@@ -4,8 +4,6 @@
 #include <linux/compiler.h>
 #include <asm/lowcore.h>
 
-#define __GENERIC_PER_CPU
-
 /*
  * s390 uses its own implementation for per cpu data, the offset of
  * the cpu local data area is cached in the cpu's lowcore memory.
@@ -15,41 +13,24 @@
  */
 #if defined(__s390x__) && defined(MODULE)
 
-#define __reloc_hide(var,offset) (*({			\
+#define SHIFT_PTR(ptr,offset) (({			\
 	extern int simple_identifier_##var(void);	\
 	unsigned long *__ptr;				\
-	asm ( "larl %0,per_cpu__"#var"@GOTENT"		\
-	    : "=a" (__ptr) : "X" (per_cpu__##var) );	\
-	(typeof(&per_cpu__##var))((*__ptr) + (offset));	}))
+	asm ( "larl %0, %1@GOTENT"		\
+	    : "=a" (__ptr) : "X" (ptr) );		\
+	(typeof(ptr))((*__ptr) + (offset));	}))
 
 #else
 
-#define __reloc_hide(var, offset) (*({				\
+#define SHIFT_PTR(ptr, offset) (({				\
 	extern int simple_identifier_##var(void);		\
 	unsigned long __ptr;					\
-	asm ( "" : "=a" (__ptr) : "0" (&per_cpu__##var) );	\
-	(typeof(&per_cpu__##var)) (__ptr + (offset)); }))
+	asm ( "" : "=a" (__ptr) : "0" (ptr) );			\
+	(typeof(ptr)) (__ptr + (offset)); }))
 
 #endif
 
-#ifdef CONFIG_SMP
-
-extern unsigned long __per_cpu_offset[NR_CPUS];
-
-/* Separate out the type, so (int[3], foo) works. */
-#define DEFINE_PER_CPU(type, name) \
-    __attribute__((__section__(".data.percpu"))) \
-    __typeof__(type) per_cpu__##name
-
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name)		\
-    __attribute__((__section__(".data.percpu.shared_aligned"))) \
-    __typeof__(type) per_cpu__##name				\
-    ____cacheline_aligned_in_smp
-
-#define __get_cpu_var(var) __reloc_hide(var,S390_lowcore.percpu_offset)
-#define __raw_get_cpu_var(var) __reloc_hide(var,S390_lowcore.percpu_offset)
-#define per_cpu(var,cpu) __reloc_hide(var,__per_cpu_offset[cpu])
-#define per_cpu_offset(x) (__per_cpu_offset[x])
+#define __my_cpu_offset S390_lowcore.percpu_offset
 
 /* A macro to avoid #include hell... */
 #define percpu_modcopy(pcpudst, src, size)			\
@@ -60,22 +41,6 @@ do {								\
 		       (src), (size));				\
 } while (0)
 
-#else /* ! SMP */
-
-#define DEFINE_PER_CPU(type, name) \
-    __typeof__(type) per_cpu__##name
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name)	\
-    DEFINE_PER_CPU(type, name)
-
-#define __get_cpu_var(var) __reloc_hide(var,0)
-#define __raw_get_cpu_var(var) __reloc_hide(var,0)
-#define per_cpu(var,cpu) __reloc_hide(var,0)
-
-#endif /* SMP */
-
-#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu__##name
-
-#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
-#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
+#include <asm-generic/percpu.h>
 
 #endif /* __ARCH_S390_PERCPU__ */
Index: linux-x86.q/include/asm-sparc64/percpu.h
===================================================================
--- linux-x86.q.orig/include/asm-sparc64/percpu.h
+++ linux-x86.q/include/asm-sparc64/percpu.h
@@ -7,7 +7,6 @@ register unsigned long __local_per_cpu_o
 
 #ifdef CONFIG_SMP
 
-#define setup_per_cpu_areas()			do { } while (0)
 extern void real_setup_per_cpu_areas(void);
 
 extern unsigned long __per_cpu_base;
@@ -16,15 +15,6 @@ extern unsigned long __per_cpu_shift;
 	(__per_cpu_base + ((unsigned long)(__cpu) << __per_cpu_shift))
 #define per_cpu_offset(x) (__per_cpu_offset(x))
 
-/* Separate out the type, so (int[3], foo) works. */
-#define DEFINE_PER_CPU(type, name) \
-    __attribute__((__section__(".data.percpu"))) __typeof__(type) per_cpu__##name
-
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name)		\
-    __attribute__((__section__(".data.percpu.shared_aligned"))) \
-    __typeof__(type) per_cpu__##name				\
-    ____cacheline_aligned_in_smp
-
 /* var is in discarded region: offset to particular copy we want */
 #define per_cpu(var, cpu) (*RELOC_HIDE(&per_cpu__##var, __per_cpu_offset(cpu)))
 #define __get_cpu_var(var) (*RELOC_HIDE(&per_cpu__##var, __local_per_cpu_offset))
@@ -41,10 +31,6 @@ do {								\
 #else /* ! SMP */
 
 #define real_setup_per_cpu_areas()		do { } while (0)
-#define DEFINE_PER_CPU(type, name) \
-    __typeof__(type) per_cpu__##name
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name)	\
-    DEFINE_PER_CPU(type, name)
 
 #define per_cpu(var, cpu)			(*((void)cpu, &per_cpu__##var))
 #define __get_cpu_var(var)			per_cpu__##var
@@ -54,7 +40,4 @@ do {								\
 
 #define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu__##name
 
-#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
-#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
-
 #endif /* __ARCH_SPARC64_PERCPU__ */
Index: linux-x86.q/include/asm-x86/pda.h
===================================================================
--- linux-x86.q.orig/include/asm-x86/pda.h
+++ linux-x86.q/include/asm-x86/pda.h
@@ -39,7 +39,6 @@ struct x8664_pda {
 } ____cacheline_aligned_in_smp;
 
 extern struct x8664_pda *_cpu_pda[];
-extern struct x8664_pda boot_cpu_pda[];
 extern void pda_init(int);
 
 #define cpu_pda(i) (_cpu_pda[i])
Index: linux-x86.q/include/asm-x86/percpu.h
===================================================================
--- linux-x86.q.orig/include/asm-x86/percpu.h
+++ linux-x86.q/include/asm-x86/percpu.h
@@ -1,5 +1,152 @@
-#ifdef CONFIG_X86_32
-# include "percpu_32.h"
+#ifndef _ASM_X86_PERCPU_H_
+#define _ASM_X86_PERCPU_H_
+
+#ifdef CONFIG_X86_64
+#include <linux/compiler.h>
+
+/* Same as asm-generic/percpu.h, except that we store the per cpu offset
+   in the PDA. Longer term the PDA and every per cpu variable
+   should be just put into a single section and referenced directly
+   from %gs */
+
+#ifdef CONFIG_SMP
+#include <asm/pda.h>
+
+#define __per_cpu_offset(cpu) (cpu_pda(cpu)->data_offset)
+#define __my_cpu_offset read_pda(data_offset)
+
+#define per_cpu_offset(x) (__per_cpu_offset(x))
+
+#define __percpu_seg "%%gs:"
+
 #else
-# include "percpu_64.h"
+
+#define __percpu_seg ""
+
 #endif
+#include <asm-generic/percpu.h>
+
+DECLARE_PER_CPU(struct x8664_pda, pda);
+
+#else /* CONFIG_X86_64 */
+
+#ifdef __ASSEMBLY__
+
+/*
+ * PER_CPU finds an address of a per-cpu variable.
+ *
+ * Args:
+ *    var - variable name
+ *    reg - 32bit register
+ *
+ * The resulting address is stored in the "reg" argument.
+ *
+ * Example:
+ *    PER_CPU(cpu_gdt_descr, %ebx)
+ */
+#ifdef CONFIG_SMP
+#define PER_CPU(var, reg)				\
+	movl %fs:per_cpu__##this_cpu_off, reg;		\
+	lea per_cpu__##var(reg), reg
+#define PER_CPU_VAR(var)	%fs:per_cpu__##var
+#else /* ! SMP */
+#define PER_CPU(var, reg)			\
+	movl $per_cpu__##var, reg
+#define PER_CPU_VAR(var)	per_cpu__##var
+#endif	/* SMP */
+
+#else /* ...!ASSEMBLY */
+
+/*
+ * PER_CPU finds an address of a per-cpu variable.
+ *
+ * Args:
+ *    var - variable name
+ *    cpu - 32bit register containing the current CPU number
+ *
+ * The resulting address is stored in the "cpu" argument.
+ *
+ * Example:
+ *    PER_CPU(cpu_gdt_descr, %ebx)
+ */
+#ifdef CONFIG_SMP
+
+#define __my_cpu_offset x86_read_percpu(this_cpu_off)
+
+/* fs segment starts at (positive) offset == __per_cpu_offset[cpu] */
+#define __percpu_seg "%%fs:"
+
+#else  /* !SMP */
+
+#define __percpu_seg ""
+
+#endif	/* SMP */
+
+#include <asm-generic/percpu.h>
+
+/* We can use this directly for local CPU (faster). */
+DECLARE_PER_CPU(unsigned long, this_cpu_off);
+
+#endif /* __ASSEMBLY__ */
+#endif /* !CONFIG_X86_64 */
+
+#ifndef __ASSEMBLY__
+
+/* For arch-specific code, we can use direct single-insn ops (they
+ * don't give an lvalue though). */
+extern void __bad_percpu_size(void);
+
+#define percpu_to_op(op,var,val)				\
+	do {							\
+		typedef typeof(var) T__;			\
+		if (0) { T__ tmp__; tmp__ = (val); }		\
+		switch (sizeof(var)) {				\
+		case 1:						\
+			asm(op "b %1,"__percpu_seg"%0"		\
+			    : "+m" (var)			\
+			    :"ri" ((T__)val));			\
+			break;					\
+		case 2:						\
+			asm(op "w %1,"__percpu_seg"%0"		\
+			    : "+m" (var)			\
+			    :"ri" ((T__)val));			\
+			break;					\
+		case 4:						\
+			asm(op "l %1,"__percpu_seg"%0"		\
+			    : "+m" (var)			\
+			    :"ri" ((T__)val));			\
+			break;					\
+		default: __bad_percpu_size();			\
+		}						\
+	} while (0)
+
+#define percpu_from_op(op,var)					\
+	({							\
+		typeof(var) ret__;				\
+		switch (sizeof(var)) {				\
+		case 1:						\
+			asm(op "b "__percpu_seg"%1,%0"		\
+			    : "=r" (ret__)			\
+			    : "m" (var));			\
+			break;					\
+		case 2:						\
+			asm(op "w "__percpu_seg"%1,%0"		\
+			    : "=r" (ret__)			\
+			    : "m" (var));			\
+			break;					\
+		case 4:						\
+			asm(op "l "__percpu_seg"%1,%0"		\
+			    : "=r" (ret__)			\
+			    : "m" (var));			\
+			break;					\
+		default: __bad_percpu_size();			\
+		}						\
+		ret__; })
+
+#define x86_read_percpu(var) percpu_from_op("mov", per_cpu__##var)
+#define x86_write_percpu(var,val) percpu_to_op("mov", per_cpu__##var, val)
+#define x86_add_percpu(var,val) percpu_to_op("add", per_cpu__##var, val)
+#define x86_sub_percpu(var,val) percpu_to_op("sub", per_cpu__##var, val)
+#define x86_or_percpu(var,val) percpu_to_op("or", per_cpu__##var, val)
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_X86_PERCPU_H_ */
Index: linux-x86.q/include/asm-x86/percpu_32.h
===================================================================
--- linux-x86.q.orig/include/asm-x86/percpu_32.h
+++ /dev/null
@@ -1,154 +0,0 @@
-#ifndef __ARCH_I386_PERCPU__
-#define __ARCH_I386_PERCPU__
-
-#ifdef __ASSEMBLY__
-
-/*
- * PER_CPU finds an address of a per-cpu variable.
- *
- * Args:
- *    var - variable name
- *    reg - 32bit register
- *
- * The resulting address is stored in the "reg" argument.
- *
- * Example:
- *    PER_CPU(cpu_gdt_descr, %ebx)
- */
-#ifdef CONFIG_SMP
-#define PER_CPU(var, reg)				\
-	movl %fs:per_cpu__##this_cpu_off, reg;		\
-	lea per_cpu__##var(reg), reg
-#define PER_CPU_VAR(var)	%fs:per_cpu__##var
-#else /* ! SMP */
-#define PER_CPU(var, reg)			\
-	movl $per_cpu__##var, reg
-#define PER_CPU_VAR(var)	per_cpu__##var
-#endif	/* SMP */
-
-#else /* ...!ASSEMBLY */
-
-/*
- * PER_CPU finds an address of a per-cpu variable.
- *
- * Args:
- *    var - variable name
- *    cpu - 32bit register containing the current CPU number
- *
- * The resulting address is stored in the "cpu" argument.
- *
- * Example:
- *    PER_CPU(cpu_gdt_descr, %ebx)
- */
-#ifdef CONFIG_SMP
-/* Same as generic implementation except for optimized local access. */
-#define __GENERIC_PER_CPU
-
-/* This is used for other cpus to find our section. */
-extern unsigned long __per_cpu_offset[];
-
-#define per_cpu_offset(x) (__per_cpu_offset[x])
-
-/* Separate out the type, so (int[3], foo) works. */
-#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu__##name
-#define DEFINE_PER_CPU(type, name) \
-    __attribute__((__section__(".data.percpu"))) __typeof__(type) per_cpu__##name
-
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name)		\
-    __attribute__((__section__(".data.percpu.shared_aligned"))) \
-    __typeof__(type) per_cpu__##name				\
-    ____cacheline_aligned_in_smp
-
-/* We can use this directly for local CPU (faster). */
-DECLARE_PER_CPU(unsigned long, this_cpu_off);
-
-/* var is in discarded region: offset to particular copy we want */
-#define per_cpu(var, cpu) (*({				\
-	extern int simple_indentifier_##var(void);	\
-	RELOC_HIDE(&per_cpu__##var, __per_cpu_offset[cpu]); }))
-
-#define __raw_get_cpu_var(var) (*({					\
-	extern int simple_indentifier_##var(void);			\
-	RELOC_HIDE(&per_cpu__##var, x86_read_percpu(this_cpu_off));	\
-}))
-
-#define __get_cpu_var(var) __raw_get_cpu_var(var)
-
-/* A macro to avoid #include hell... */
-#define percpu_modcopy(pcpudst, src, size)			\
-do {								\
-	unsigned int __i;					\
-	for_each_possible_cpu(__i)				\
-		memcpy((pcpudst)+__per_cpu_offset[__i],		\
-		       (src), (size));				\
-} while (0)
-
-#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
-#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
-
-/* fs segment starts at (positive) offset == __per_cpu_offset[cpu] */
-#define __percpu_seg "%%fs:"
-#else  /* !SMP */
-#include <asm-generic/percpu.h>
-#define __percpu_seg ""
-#endif	/* SMP */
-
-/* For arch-specific code, we can use direct single-insn ops (they
- * don't give an lvalue though). */
-extern void __bad_percpu_size(void);
-
-#define percpu_to_op(op,var,val)				\
-	do {							\
-		typedef typeof(var) T__;			\
-		if (0) { T__ tmp__; tmp__ = (val); }		\
-		switch (sizeof(var)) {				\
-		case 1:						\
-			asm(op "b %1,"__percpu_seg"%0"		\
-			    : "+m" (var)			\
-			    :"ri" ((T__)val));			\
-			break;					\
-		case 2:						\
-			asm(op "w %1,"__percpu_seg"%0"		\
-			    : "+m" (var)			\
-			    :"ri" ((T__)val));			\
-			break;					\
-		case 4:						\
-			asm(op "l %1,"__percpu_seg"%0"		\
-			    : "+m" (var)			\
-			    :"ri" ((T__)val));			\
-			break;					\
-		default: __bad_percpu_size();			\
-		}						\
-	} while (0)
-
-#define percpu_from_op(op,var)					\
-	({							\
-		typeof(var) ret__;				\
-		switch (sizeof(var)) {				\
-		case 1:						\
-			asm(op "b "__percpu_seg"%1,%0"		\
-			    : "=r" (ret__)			\
-			    : "m" (var));			\
-			break;					\
-		case 2:						\
-			asm(op "w "__percpu_seg"%1,%0"		\
-			    : "=r" (ret__)			\
-			    : "m" (var));			\
-			break;					\
-		case 4:						\
-			asm(op "l "__percpu_seg"%1,%0"		\
-			    : "=r" (ret__)			\
-			    : "m" (var));			\
-			break;					\
-		default: __bad_percpu_size();			\
-		}						\
-		ret__; })
-
-#define x86_read_percpu(var) percpu_from_op("mov", per_cpu__##var)
-#define x86_write_percpu(var,val) percpu_to_op("mov", per_cpu__##var, val)
-#define x86_add_percpu(var,val) percpu_to_op("add", per_cpu__##var, val)
-#define x86_sub_percpu(var,val) percpu_to_op("sub", per_cpu__##var, val)
-#define x86_or_percpu(var,val) percpu_to_op("or", per_cpu__##var, val)
-#endif /* !__ASSEMBLY__ */
-
-#endif /* __ARCH_I386_PERCPU__ */
Index: linux-x86.q/include/asm-x86/percpu_64.h
===================================================================
--- linux-x86.q.orig/include/asm-x86/percpu_64.h
+++ /dev/null
@@ -1,68 +0,0 @@
-#ifndef _ASM_X8664_PERCPU_H_
-#define _ASM_X8664_PERCPU_H_
-#include <linux/compiler.h>
-
-/* Same as asm-generic/percpu.h, except that we store the per cpu offset
-   in the PDA. Longer term the PDA and every per cpu variable
-   should be just put into a single section and referenced directly
-   from %gs */
-
-#ifdef CONFIG_SMP
-
-#include <asm/pda.h>
-
-#define __per_cpu_offset(cpu) (cpu_pda(cpu)->data_offset)
-#define __my_cpu_offset() read_pda(data_offset)
-
-#define per_cpu_offset(x) (__per_cpu_offset(x))
-
-/* Separate out the type, so (int[3], foo) works. */
-#define DEFINE_PER_CPU(type, name) \
-    __attribute__((__section__(".data.percpu"))) __typeof__(type) per_cpu__##name
-
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name)		\
-    __attribute__((__section__(".data.percpu.shared_aligned"))) \
-    __typeof__(type) per_cpu__##name				\
-    ____cacheline_internodealigned_in_smp
-
-/* var is in discarded region: offset to particular copy we want */
-#define per_cpu(var, cpu) (*({				\
-	extern int simple_identifier_##var(void);	\
-	RELOC_HIDE(&per_cpu__##var, __per_cpu_offset(cpu)); }))
-#define __get_cpu_var(var) (*({				\
-	extern int simple_identifier_##var(void);	\
-	RELOC_HIDE(&per_cpu__##var, __my_cpu_offset()); }))
-#define __raw_get_cpu_var(var) (*({			\
-	extern int simple_identifier_##var(void);	\
-	RELOC_HIDE(&per_cpu__##var, __my_cpu_offset()); }))
-
-/* A macro to avoid #include hell... */
-#define percpu_modcopy(pcpudst, src, size)			\
-do {								\
-	unsigned int __i;					\
-	for_each_possible_cpu(__i)				\
-		memcpy((pcpudst)+__per_cpu_offset(__i),		\
-		       (src), (size));				\
-} while (0)
-
-extern void setup_per_cpu_areas(void);
-
-#else /* ! SMP */
-
-#define DEFINE_PER_CPU(type, name) \
-    __typeof__(type) per_cpu__##name
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name)	\
-    DEFINE_PER_CPU(type, name)
-
-#define per_cpu(var, cpu)			(*((void)(cpu), &per_cpu__##var))
-#define __get_cpu_var(var)			per_cpu__##var
-#define __raw_get_cpu_var(var)			per_cpu__##var
-
-#endif	/* SMP */
-
-#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu__##name
-
-#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
-#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
-
-#endif /* _ASM_X8664_PERCPU_H_ */
Index: linux-x86.q/include/linux/percpu.h
===================================================================
--- linux-x86.q.orig/include/linux/percpu.h
+++ linux-x86.q/include/linux/percpu.h
@@ -9,6 +9,27 @@
 
 #include <asm/percpu.h>
 
+#define DEFINE_PER_CPU(type, name)					\
+	__attribute__((__section__(".data.percpu")))			\
+	PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
+
+#ifdef CONFIG_SMP
+#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name)			\
+	__attribute__((__section__(".data.percpu.shared_aligned")))	\
+	PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name		\
+	____cacheline_aligned_in_smp
+#else
+#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name)		      \
+	DEFINE_PER_CPU(type, name)
+#endif
+
+#define DEFINE_PER_CPU_FIRST(type, name)				\
+	__attribute__((__section__(".data.percpu.first")))		\
+	PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
+
+#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
+#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
+
 /* Enough to cover all DEFINE_PER_CPUs in kernel, including modules. */
 #ifndef PERCPU_ENOUGH_ROOM
 #ifdef CONFIG_MODULES
Index: linux-x86.q/init/main.c
===================================================================
--- linux-x86.q.orig/init/main.c
+++ linux-x86.q/init/main.c
@@ -363,28 +363,29 @@ static inline void smp_prepare_cpus(unsi
 
 #else
 
-#ifdef __GENERIC_PER_CPU
+#ifndef CONFIG_ARCH_SETS_UP_PER_CPU_AREA
 unsigned long __per_cpu_offset[NR_CPUS] __read_mostly;
 
 EXPORT_SYMBOL(__per_cpu_offset);
 
 static void __init setup_per_cpu_areas(void)
 {
-	unsigned long size, i;
-	char *ptr;
-	unsigned long nr_possible_cpus = num_possible_cpus();
+	unsigned long size;
+	int cpu;
 
 	/* Copy section for each CPU (we discard the original) */
 	size = ALIGN(PERCPU_ENOUGH_ROOM, PAGE_SIZE);
-	ptr = alloc_bootmem_pages(size * nr_possible_cpus);
 
-	for_each_possible_cpu(i) {
-		__per_cpu_offset[i] = ptr - __per_cpu_start;
-		memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
-		ptr += size;
+	for_each_possible_cpu(cpu) {
+		char *ptr;
+
+		ptr = alloc_bootmem_pages_node(NODE_DATA(cpu_to_node(cpu)),
+								size);
+		__per_cpu_offset[cpu] = ptr - __per_cpu_start;
+		memcpy(ptr, __per_cpu_load, __per_cpu_size);
 	}
 }
-#endif /* !__GENERIC_PER_CPU */
+#endif /* CONFIG_ARCH_SETS_UP_CPU_AREA */
 
 /* Called by boot processor to activate the rest. */
 static void __init smp_init(void)
Index: linux-x86.q/kernel/lockdep.c
===================================================================
--- linux-x86.q.orig/kernel/lockdep.c
+++ linux-x86.q/kernel/lockdep.c
@@ -613,8 +613,8 @@ static int static_obj(void *obj)
 	 * percpu var?
 	 */
 	for_each_possible_cpu(i) {
-		start = (unsigned long) &__per_cpu_start + per_cpu_offset(i);
-		end   = (unsigned long) &__per_cpu_start + PERCPU_ENOUGH_ROOM
+		start = (unsigned long) __per_cpu_start + per_cpu_offset(i);
+		end   = (unsigned long) __per_cpu_start + PERCPU_ENOUGH_ROOM
 					+ per_cpu_offset(i);
 
 		if ((addr >= start) && (addr < end))

Re: [patch 0/3] Per cpu relocation to ZERO and x86_32 percpu ops on x86_64

[Ingo Molnar]

and the patches dont even build on 64-bit x86:

kernel/module.c: In function 'load_module':
kernel/module.c:1989: error: '__per_cpu_offset' undeclared (first use in this function)
kernel/module.c:1989: error: (Each undeclared identifier is reported only once
kernel/module.c:1989: error: for each function it appears in.)

config below. I'm dropping the patches for now. (again, this might be my 
mismerge)

	Ingo

------------>
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc3
# Fri Nov 30 12:13:02 2007
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
# CONFIG_QUICKLIST is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_SETS_UP_PER_CPU_AREA=y
CONFIG_PERCPU_ZERO_BASED=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_HT=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=20
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_L1_CACHE_BYTES=128
CONFIG_X86_INTERNODE_CACHE_BYTES=128
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
CONFIG_SWIOTLB=y
CONFIG_NR_CPUS=255
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_MICROCODE=m
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_NUMA=y
CONFIG_K8_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_THREAD_ORDER=1
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MTRR=y
# CONFIG_SECCOMP is not set
CONFIG_CC_STACKPROTECTOR=y
CONFIG_CC_STACKPROTECTOR_ALL=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y

#
# Power management options
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND_SMP_POSSIBLE=y
CONFIG_SUSPEND=y
CONFIG_HIBERNATION_SMP_POSSIBLE=y
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
# CONFIG_ACPI_BAY is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_ASUS=y
CONFIG_ACPI_TOSHIBA=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_SBS=m

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m

#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_POWERNOW_K8_ACPI=y
CONFIG_X86_SPEEDSTEP_CENTRINO=y
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set
# CONFIG_CPU_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=y
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=m

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_NF_CONNTRACK_ENABLED is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_QUEUE=m
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set

#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
# CONFIG_IP6_NF_QUEUE is not set
# CONFIG_IP6_NF_IPTABLES is not set

#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
# CONFIG_NET_SCH_RR is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
CONFIG_NET_CLS_POLICE=y
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
# CONFIG_BT_HCIUART_LL is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
# CONFIG_BT_HCIDTL1 is not set
# CONFIG_BT_HCIBT3C is not set
# CONFIG_BT_HCIBLUECARD is not set
# CONFIG_BT_HCIBTUART is not set
CONFIG_BT_HCIVHCI=m
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y

#
# Wireless
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
# CONFIG_IEEE80211_SOFTMAC is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=m
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set

#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_PNC2000 is not set
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
# CONFIG_MTD_AMD76XROM is not set
# CONFIG_MTD_ICHXROM is not set
# CONFIG_MTD_ESB2ROM is not set
# CONFIG_MTD_CK804XROM is not set
# CONFIG_MTD_SCB2_FLASH is not set
# CONFIG_MTD_NETtel is not set
# CONFIG_MTD_DILNETPC is not set
# CONFIG_MTD_L440GX is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
CONFIG_MTD_PLATRAM=m

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_IDS=m
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_CAFE is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set

#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
CONFIG_BLK_CPQ_DA=y
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
CONFIG_IBM_ASM=m
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_FC_TGT_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
# CONFIG_SCSI_SAS_ATA is not set
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
CONFIG_AIC7XXX_RESET_DELAY_MS=1000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=1000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC94XX=y
# CONFIG_AIC94XX_DEBUG is not set
# CONFIG_SCSI_ADVANSYS is not set
CONFIG_SCSI_ARCMSR=m
# CONFIG_SCSI_ARCMSR_AER is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_OMIT_FLASHPOINT is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_SRP=m
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_AHCI=y
CONFIG_SATA_SVW=y
CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=y
CONFIG_SATA_NV=y
CONFIG_PDC_ADMA=y
CONFIG_SATA_QSTOR=y
CONFIG_SATA_PROMISE=y
CONFIG_SATA_SX4=y
CONFIG_SATA_SIL=y
CONFIG_SATA_SIL24=y
CONFIG_SATA_SIS=y
CONFIG_SATA_ULI=y
CONFIG_SATA_VIA=y
CONFIG_SATA_VITESSE=y
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
CONFIG_PATA_ALI=y
CONFIG_PATA_AMD=y
CONFIG_PATA_ARTOP=y
CONFIG_PATA_ATIIXP=y
# CONFIG_PATA_CMD640_PCI is not set
CONFIG_PATA_CMD64X=y
CONFIG_PATA_CS5520=y
CONFIG_PATA_CS5530=y
CONFIG_PATA_CYPRESS=y
CONFIG_PATA_EFAR=y
CONFIG_ATA_GENERIC=y
CONFIG_PATA_HPT366=y
CONFIG_PATA_HPT37X=y
CONFIG_PATA_HPT3X2N=y
CONFIG_PATA_HPT3X3=y
# CONFIG_PATA_HPT3X3_DMA is not set
CONFIG_PATA_IT821X=y
# CONFIG_PATA_IT8213 is not set
CONFIG_PATA_JMICRON=y
CONFIG_PATA_TRIFLEX=y
CONFIG_PATA_MARVELL=y
CONFIG_PATA_MPIIX=y
CONFIG_PATA_OLDPIIX=y
CONFIG_PATA_NETCELL=y
CONFIG_PATA_NS87410=y
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OPTI=y
CONFIG_PATA_OPTIDMA=y
# CONFIG_PATA_PCMCIA is not set
CONFIG_PATA_PDC_OLD=y
CONFIG_PATA_RADISYS=y
CONFIG_PATA_RZ1000=y
CONFIG_PATA_SC1200=y
CONFIG_PATA_SERVERWORKS=y
CONFIG_PATA_PDC2027X=y
CONFIG_PATA_SIL680=y
CONFIG_PATA_SIS=y
CONFIG_PATA_VIA=y
CONFIG_PATA_WINBOND=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
# CONFIG_MD_RAID456 is not set
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m
# CONFIG_DM_MULTIPATH_RDAC is not set
# CONFIG_DM_MULTIPATH_HP is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=y
CONFIG_FUSION_LAN=m
# CONFIG_FUSION_LOGGING is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_IFB is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
# CONFIG_ULI526X is not set
# CONFIG_PCMCIA_XIRCOM is not set
CONFIG_HP100=m
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
# CONFIG_PCNET32_NAPI is not set
CONFIG_AMD8111_ETH=m
CONFIG_AMD8111E_NAPI=y
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_ADAPTEC_STARFIRE_NAPI=y
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=y
CONFIG_FORCEDETH_NAPI=y
CONFIG_EEPRO100=m
CONFIG_E100=y
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
# CONFIG_SUNDANCE is not set
CONFIG_VIA_RHINE=y
CONFIG_VIA_RHINE_MMIO=y
# CONFIG_VIA_RHINE_NAPI is not set
# CONFIG_SC92031 is not set
CONFIG_NET_POCKET=y
# CONFIG_ATP is not set
# CONFIG_DE600 is not set
# CONFIG_DE620 is not set
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=y
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
CONFIG_NS83820=m
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
CONFIG_R8169_NAPI=y
CONFIG_R8169_VLAN=y
# CONFIG_SIS190 is not set
CONFIG_SKGE=y
# CONFIG_SKGE_DEBUG is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=y
CONFIG_BNX2=m
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGBE is not set
CONFIG_IXGB=m
CONFIG_IXGB_NAPI=y
CONFIG_S2IO=m
CONFIG_S2IO_NAPI=y
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
CONFIG_TR=y
CONFIG_IBMOL=m
CONFIG_3C359=m
CONFIG_TMS380TR=m
CONFIG_TMSPCI=m
CONFIG_ABYSS=m

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set

#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_DM9601 is not set
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
# CONFIG_USB_NET_MCS7830 is not set
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
# CONFIG_USB_KC2190 is not set
CONFIG_USB_NET_ZAURUS=m
# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
# CONFIG_ATM_ZATM is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
CONFIG_ATM_FORE200E_MAYBE=m
# CONFIG_ATM_FORE200E_PCA is not set
CONFIG_ATM_HE=m
# CONFIG_ATM_HE_USE_SUNI is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
# CONFIG_SKFP is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
CONFIG_NET_FC=y
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_ISDN=m
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
# CONFIG_ISDN_PPP_BSDCOMP is not set
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y

#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m

#
# ISDN4Linux hardware drivers
#

#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m

#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
CONFIG_HISAX_NO_SENDCOMPLETE=y
CONFIG_HISAX_NO_LLC=y
CONFIG_HISAX_NO_KEYPAD=y
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8

#
# HiSax supported cards
#
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
# CONFIG_HISAX_DEBUG is not set

#
# HiSax PCMCIA card service modules
#
# CONFIG_HISAX_SEDLBAUER_CS is not set
# CONFIG_HISAX_ELSA_CS is not set
# CONFIG_HISAX_AVM_A1_CS is not set
# CONFIG_HISAX_TELES_CS is not set

#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
CONFIG_HISAX_HFCUSB=m
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_HISAX_HDLC=y

#
# Active cards
#
# CONFIG_ISDN_DRV_GIGASET is not set
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=m
CONFIG_ISDN_CAPI_CAPIDRV=m

#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
# CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=m
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m
CONFIG_ISDN_DIVAS_MAINT=m
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_POLLDEV is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_APPLETOUCH is not set
CONFIG_MOUSE_VSXXXAA=m
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
CONFIG_JOYSTICK_TWIDJOY=m
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
CONFIG_JOYSTICK_JOYDUMP=m
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_FUJITSU is not set
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_MK712=m
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_UCB1400 is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
CONFIG_INPUT_UINPUT=m

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_MOXA_SMARTIO_NEW is not set
# CONFIG_ISI is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
# CONFIG_SYNCLINK_GT is not set
CONFIG_N_HDLC=m
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
CONFIG_STALDRV=y

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
# CONFIG_TIPAR is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_NVRAM=m
CONFIG_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
# CONFIG_I2C_SIMTEC is not set
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_STUB=m
# CONFIG_I2C_TINY_USB is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m

#
# Miscellaneous I2C Chip support
#
CONFIG_SENSORS_DS1337=m
CONFIG_SENSORS_DS1374=m
# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_MAX6875=m
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
# CONFIG_SENSORS_ADM1029 is not set
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_K8TEMP is not set
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
# CONFIG_SENSORS_FSCHMD is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
# CONFIG_SENSORS_LM93 is not set
CONFIG_SENSORS_MAX1619=m
# CONFIG_SENSORS_MAX6650 is not set
CONFIG_SENSORS_PC87360=m
# CONFIG_SENSORS_PC87427 is not set
CONFIG_SENSORS_SIS5595=m
# CONFIG_SENSORS_DME1737 is not set
CONFIG_SENSORS_SMSC47M1=m
# CONFIG_SENSORS_SMSC47M192 is not set
CONFIG_SENSORS_SMSC47B397=m
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_VIA686A=m
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
CONFIG_SENSORS_W83781D=m
# CONFIG_SENSORS_W83791D is not set
CONFIG_SENSORS_W83792D=m
# CONFIG_SENSORS_W83793 is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_SC520_WDT=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
# CONFIG_ITCO_WDT is not set
CONFIG_SC1200_WDT=m
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
CONFIG_SBC8360_WDT=m
CONFIG_CPU5_WDT=m
# CONFIG_SMSC37B787_WDT is not set
CONFIG_W83627HF_WDT=m
# CONFIG_W83697HF_WDT is not set
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
# CONFIG_SSB_PCMCIAHOST is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y

#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
CONFIG_V4L_USB_DRIVERS=y
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_USBVISION is not set
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
# CONFIG_USB_QUICKCAM_MESSENGER is not set
# CONFIG_USB_ET61X251 is not set
CONFIG_VIDEO_OVCAMCHIP=m
CONFIG_USB_W9968CF=m
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
# CONFIG_USB_ZC0301 is not set
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
# CONFIG_USB_ZR364XX is not set
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
CONFIG_USB_DSBR=m
# CONFIG_DVB_CORE is not set
CONFIG_DAB=y
CONFIG_USB_DABUSB=m

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_SIS=y
CONFIG_AGP_VIA=y
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=y
CONFIG_DRM_I810=y
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=y
CONFIG_DRM_MGA=m
# CONFIG_DRM_SIS is not set
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_ARC=m
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
CONFIG_FB_VESA=y
# CONFIG_FB_HECUBA is not set
# CONFIG_FB_HGA is not set
CONFIG_FB_S1D13XXX=m
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=m
# CONFIG_FB_RIVA_I2C is not set
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
# CONFIG_FB_LE80578 is not set
CONFIG_FB_INTEL=m
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_INTEL_I2C=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
CONFIG_FB_KYRO=m
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_CORGI is not set
# CONFIG_BACKLIGHT_PROGEAR is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=y
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DUMMY=m
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=y
# CONFIG_SND_PORTMAN2X4 is not set
CONFIG_SND_SB_COMMON=m

#
# PCI devices
#
CONFIG_SND_AD1889=m
# CONFIG_SND_ALS300 is not set
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
CONFIG_SND_EMU10K1=y
CONFIG_SND_EMU10K1X=y
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_FM801=m
# CONFIG_SND_FM801_TEA575X_BOOL is not set
CONFIG_SND_HDA_INTEL=y
# CONFIG_SND_HDA_HWDEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_INTEL8X0M is not set
CONFIG_SND_KORG1212=m
CONFIG_SND_KORG1212_FIRMWARE_IN_KERNEL=y
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_FIRMWARE_IN_KERNEL=y
# CONFIG_SND_MIXART is not set
CONFIG_SND_NM256=m
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0

#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
# CONFIG_SND_USB_CAIAQ is not set

#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set

#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set

#
# SoC Audio support for SuperH
#

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
# CONFIG_HIDRAW is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_THRUSTMASTER_FF=y
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_HIDDEV=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
# CONFIG_USB_STORAGE_ISD200 is not set
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
CONFIG_USB_MON=y

#
# USB port drivers
#
CONFIG_USB_USS720=m

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
CONFIG_USB_SERIAL_AIRPRIME=m
# CONFIG_USB_SERIAL_ARK3116 is not set
CONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_FUNSOFT is not set
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
# CONFIG_USB_SERIAL_OPTION is not set
CONFIG_USB_SERIAL_OMNINET=m
# CONFIG_USB_SERIAL_DEBUG is not set
CONFIG_USB_EZUSB=y

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
# CONFIG_USB_BERRY_CHARGE is not set
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=m

#
# USB DSL modem support
#
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
# CONFIG_USB_UEAGLEATM is not set
CONFIG_USB_XUSBATM=m

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set

#
# Userspace I/O
#
# CONFIG_UIO is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=m
CONFIG_VXFS_FS=m
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
# CONFIG_SUNRPC_BIND34 is not set
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
CONFIG_INSTRUMENTATION=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
CONFIG_KPROBES=y
# CONFIG_MARKERS is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_IOMMU_DEBUG is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_LRW=y
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_X86_64=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_ANUBIS=y
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_HW=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y

Re: [patch 0/3] Per cpu relocation to ZERO and x86_32 percpu ops on x86_64

[Christoph Lameter]

On Fri, 30 Nov 2007, Ingo Molnar wrote:

> config below. I'm dropping the patches for now. (again, this might be my 
> mismerge)

These patches are against 2.6.24-rc3-mm2 and require core code changes. 
You cannot simply merge them into the x86 arch.

Re: [patch 0/3] Per cpu relocation to ZERO and x86_32 percpu ops on x86_64

[Christoph Lameter]

On Fri, 30 Nov 2007, Ingo Molnar wrote:

> 
> and the patches dont even build on 64-bit x86:
> 
> kernel/module.c: In function 'load_module':
> kernel/module.c:1989: error: '__per_cpu_offset' undeclared (first use in this function)
> kernel/module.c:1989: error: (Each undeclared identifier is reported only once
> kernel/module.c:1989: error: for each function it appears in.)
> 
> config below. I'm dropping the patches for now. (again, this might be my 
> mismerge)

Right. The above is a result of your missing a cleanup patch from mm that 
fixes the module issue. Again running mm will take care of all of these 
things.




> CONFIG_ZONE_DMA32=y
> CONFIG_ARCH_POPULATES_NODE_MAP=y
> CONFIG_AUDIT_ARCH=y
> CONFIG_GENERIC_HARDIRQS=y
> CONFIG_GENERIC_IRQ_PROBE=y
> CONFIG_GENERIC_PENDING_IRQ=y
> CONFIG_X86_HT=y
> # CONFIG_KTIME_SCALAR is not set
> CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
> 
> #
> # General setup
> #
> CONFIG_EXPERIMENTAL=y
> CONFIG_LOCK_KERNEL=y
> CONFIG_INIT_ENV_ARG_LIMIT=32
> CONFIG_LOCALVERSION=""
> # CONFIG_LOCALVERSION_AUTO is not set
> CONFIG_SWAP=y
> CONFIG_SYSVIPC=y
> CONFIG_SYSVIPC_SYSCTL=y
> CONFIG_POSIX_MQUEUE=y
> CONFIG_BSD_PROCESS_ACCT=y
> # CONFIG_BSD_PROCESS_ACCT_V3 is not set
> CONFIG_TASKSTATS=y
> CONFIG_TASK_DELAY_ACCT=y
> # CONFIG_TASK_XACCT is not set
> # CONFIG_USER_NS is not set
> # CONFIG_PID_NS is not set
> CONFIG_AUDIT=y
> CONFIG_AUDITSYSCALL=y
> CONFIG_AUDIT_TREE=y
> # CONFIG_IKCONFIG is not set
> CONFIG_LOG_BUF_SHIFT=20
> # CONFIG_CGROUPS is not set
> CONFIG_FAIR_GROUP_SCHED=y
> CONFIG_FAIR_USER_SCHED=y
> # CONFIG_FAIR_CGROUP_SCHED is not set
> CONFIG_SYSFS_DEPRECATED=y
> CONFIG_RELAY=y
> CONFIG_BLK_DEV_INITRD=y
> CONFIG_INITRAMFS_SOURCE=""
> CONFIG_CC_OPTIMIZE_FOR_SIZE=y
> CONFIG_SYSCTL=y
> # CONFIG_EMBEDDED is not set
> CONFIG_UID16=y
> CONFIG_SYSCTL_SYSCALL=y
> CONFIG_KALLSYMS=y
> CONFIG_KALLSYMS_ALL=y
> CONFIG_KALLSYMS_EXTRA_PASS=y
> CONFIG_HOTPLUG=y
> CONFIG_PRINTK=y
> CONFIG_BUG=y
> CONFIG_ELF_CORE=y
> CONFIG_BASE_FULL=y
> CONFIG_FUTEX=y
> CONFIG_ANON_INODES=y
> CONFIG_EPOLL=y
> CONFIG_SIGNALFD=y
> CONFIG_EVENTFD=y
> CONFIG_SHMEM=y
> CONFIG_VM_EVENT_COUNTERS=y
> CONFIG_SLAB=y
> # CONFIG_SLUB is not set
> # CONFIG_SLOB is not set
> CONFIG_RT_MUTEXES=y
> # CONFIG_TINY_SHMEM is not set
> CONFIG_BASE_SMALL=0
> CONFIG_MODULES=y
> CONFIG_MODULE_UNLOAD=y
> # CONFIG_MODULE_FORCE_UNLOAD is not set
> CONFIG_MODVERSIONS=y
> CONFIG_MODULE_SRCVERSION_ALL=y
> CONFIG_KMOD=y
> CONFIG_STOP_MACHINE=y
> CONFIG_BLOCK=y
> CONFIG_BLK_DEV_IO_TRACE=y
> # CONFIG_BLK_DEV_BSG is not set
> CONFIG_BLOCK_COMPAT=y
> 
> #
> # IO Schedulers
> #
> CONFIG_IOSCHED_NOOP=y
> CONFIG_IOSCHED_AS=y
> CONFIG_IOSCHED_DEADLINE=y
> CONFIG_IOSCHED_CFQ=y
> # CONFIG_DEFAULT_AS is not set
> # CONFIG_DEFAULT_DEADLINE is not set
> CONFIG_DEFAULT_CFQ=y
> # CONFIG_DEFAULT_NOOP is not set
> CONFIG_DEFAULT_IOSCHED="cfq"
> 
> #
> # Processor type and features
> #
> CONFIG_TICK_ONESHOT=y
> CONFIG_NO_HZ=y
> CONFIG_HIGH_RES_TIMERS=y
> CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
> CONFIG_SMP=y
> CONFIG_X86_PC=y
> # CONFIG_X86_ELAN is not set
> # CONFIG_X86_VOYAGER is not set
> # CONFIG_X86_NUMAQ is not set
> # CONFIG_X86_SUMMIT is not set
> # CONFIG_X86_BIGSMP is not set
> # CONFIG_X86_VISWS is not set
> # CONFIG_X86_GENERICARCH is not set
> # CONFIG_X86_ES7000 is not set
> # CONFIG_X86_RDC321X is not set
> # CONFIG_X86_VSMP is not set
> # CONFIG_M386 is not set
> # CONFIG_M486 is not set
> # CONFIG_M586 is not set
> # CONFIG_M586TSC is not set
> # CONFIG_M586MMX is not set
> # CONFIG_M686 is not set
> # CONFIG_MPENTIUMII is not set
> # CONFIG_MPENTIUMIII is not set
> # CONFIG_MPENTIUMM is not set
> # CONFIG_MPENTIUM4 is not set
> # CONFIG_MK6 is not set
> # CONFIG_MK7 is not set
> # CONFIG_MK8 is not set
> # CONFIG_MCRUSOE is not set
> # CONFIG_MEFFICEON is not set
> # CONFIG_MWINCHIPC6 is not set
> # CONFIG_MWINCHIP2 is not set
> # CONFIG_MWINCHIP3D is not set
> # CONFIG_MGEODEGX1 is not set
> # CONFIG_MGEODE_LX is not set
> # CONFIG_MCYRIXIII is not set
> # CONFIG_MVIAC3_2 is not set
> # CONFIG_MVIAC7 is not set
> # CONFIG_MPSC is not set
> # CONFIG_MCORE2 is not set
> CONFIG_GENERIC_CPU=y
> CONFIG_X86_L1_CACHE_BYTES=128
> CONFIG_X86_INTERNODE_CACHE_BYTES=128
> CONFIG_X86_CMPXCHG=y
> CONFIG_X86_L1_CACHE_SHIFT=7
> CONFIG_X86_GOOD_APIC=y
> CONFIG_X86_TSC=y
> CONFIG_X86_MINIMUM_CPU_FAMILY=64
> CONFIG_X86_DEBUGCTLMSR=y
> CONFIG_HPET_TIMER=y
> CONFIG_HPET_EMULATE_RTC=y
> CONFIG_GART_IOMMU=y
> CONFIG_CALGARY_IOMMU=y
> CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
> CONFIG_SWIOTLB=y
> CONFIG_NR_CPUS=255
> CONFIG_SCHED_SMT=y
> CONFIG_SCHED_MC=y
> # CONFIG_PREEMPT_NONE is not set
> # CONFIG_PREEMPT_VOLUNTARY is not set
> CONFIG_PREEMPT=y
> CONFIG_PREEMPT_BKL=y
> CONFIG_X86_LOCAL_APIC=y
> CONFIG_X86_IO_APIC=y
> CONFIG_X86_MCE=y
> CONFIG_X86_MCE_INTEL=y
> CONFIG_X86_MCE_AMD=y
> CONFIG_MICROCODE=m
> CONFIG_MICROCODE_OLD_INTERFACE=y
> CONFIG_X86_MSR=y
> CONFIG_X86_CPUID=y
> CONFIG_NUMA=y
> CONFIG_K8_NUMA=y
> CONFIG_X86_64_ACPI_NUMA=y
> CONFIG_THREAD_ORDER=1
> # CONFIG_NUMA_EMU is not set
> CONFIG_NODES_SHIFT=6
> CONFIG_ARCH_SPARSEMEM_DEFAULT=y
> CONFIG_ARCH_SPARSEMEM_ENABLE=y
> CONFIG_ARCH_SELECT_MEMORY_MODEL=y
> CONFIG_SELECT_MEMORY_MODEL=y
> # CONFIG_FLATMEM_MANUAL is not set
> # CONFIG_DISCONTIGMEM_MANUAL is not set
> CONFIG_SPARSEMEM_MANUAL=y
> CONFIG_SPARSEMEM=y
> CONFIG_NEED_MULTIPLE_NODES=y
> CONFIG_HAVE_MEMORY_PRESENT=y
> # CONFIG_SPARSEMEM_STATIC is not set
> CONFIG_SPARSEMEM_EXTREME=y
> CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
> CONFIG_SPARSEMEM_VMEMMAP=y
> # CONFIG_MEMORY_HOTPLUG is not set
> CONFIG_SPLIT_PTLOCK_CPUS=4
> CONFIG_MIGRATION=y
> CONFIG_RESOURCES_64BIT=y
> CONFIG_ZONE_DMA_FLAG=1
> CONFIG_BOUNCE=y
> CONFIG_VIRT_TO_BUS=y
> CONFIG_MTRR=y
> # CONFIG_SECCOMP is not set
> CONFIG_CC_STACKPROTECTOR=y
> CONFIG_CC_STACKPROTECTOR_ALL=y
> # CONFIG_HZ_100 is not set
> # CONFIG_HZ_250 is not set
> # CONFIG_HZ_300 is not set
> CONFIG_HZ_1000=y
> CONFIG_HZ=1000
> CONFIG_KEXEC=y
> # CONFIG_CRASH_DUMP is not set
> CONFIG_PHYSICAL_START=0x200000
> # CONFIG_RELOCATABLE is not set
> CONFIG_PHYSICAL_ALIGN=0x200000
> CONFIG_HOTPLUG_CPU=y
> CONFIG_COMPAT_VDSO=y
> CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
> CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
> 
> #
> # Power management options
> #
> CONFIG_PM=y
> CONFIG_PM_LEGACY=y
> # CONFIG_PM_DEBUG is not set
> CONFIG_PM_SLEEP_SMP=y
> CONFIG_PM_SLEEP=y
> CONFIG_SUSPEND_SMP_POSSIBLE=y
> CONFIG_SUSPEND=y
> CONFIG_HIBERNATION_SMP_POSSIBLE=y
> # CONFIG_HIBERNATION is not set
> CONFIG_ACPI=y
> CONFIG_ACPI_SLEEP=y
> CONFIG_ACPI_PROCFS=y
> CONFIG_ACPI_PROCFS_POWER=y
> CONFIG_ACPI_PROC_EVENT=y
> CONFIG_ACPI_AC=y
> CONFIG_ACPI_BATTERY=y
> CONFIG_ACPI_BUTTON=y
> CONFIG_ACPI_VIDEO=m
> CONFIG_ACPI_FAN=y
> CONFIG_ACPI_DOCK=y
> # CONFIG_ACPI_BAY is not set
> CONFIG_ACPI_PROCESSOR=y
> CONFIG_ACPI_HOTPLUG_CPU=y
> CONFIG_ACPI_THERMAL=y
> CONFIG_ACPI_NUMA=y
> CONFIG_ACPI_ASUS=y
> CONFIG_ACPI_TOSHIBA=y
> CONFIG_ACPI_BLACKLIST_YEAR=0
> # CONFIG_ACPI_DEBUG is not set
> CONFIG_ACPI_EC=y
> CONFIG_ACPI_POWER=y
> CONFIG_ACPI_SYSTEM=y
> CONFIG_X86_PM_TIMER=y
> CONFIG_ACPI_CONTAINER=y
> CONFIG_ACPI_SBS=m
> 
> #
> # CPU Frequency scaling
> #
> CONFIG_CPU_FREQ=y
> CONFIG_CPU_FREQ_TABLE=y
> CONFIG_CPU_FREQ_DEBUG=y
> CONFIG_CPU_FREQ_STAT=m
> CONFIG_CPU_FREQ_STAT_DETAILS=y
> # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
> CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
> # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
> # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
> CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
> CONFIG_CPU_FREQ_GOV_POWERSAVE=m
> CONFIG_CPU_FREQ_GOV_USERSPACE=y
> CONFIG_CPU_FREQ_GOV_ONDEMAND=m
> CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
> 
> #
> # CPUFreq processor drivers
> #
> CONFIG_X86_ACPI_CPUFREQ=y
> CONFIG_X86_POWERNOW_K8=y
> CONFIG_X86_POWERNOW_K8_ACPI=y
> CONFIG_X86_SPEEDSTEP_CENTRINO=y
> # CONFIG_X86_P4_CLOCKMOD is not set
> 
> #
> # shared options
> #
> # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
> # CONFIG_X86_SPEEDSTEP_LIB is not set
> # CONFIG_CPU_IDLE is not set
> 
> #
> # Bus options (PCI etc.)
> #
> CONFIG_PCI=y
> CONFIG_PCI_DIRECT=y
> CONFIG_PCI_MMCONFIG=y
> CONFIG_PCI_DOMAINS=y
> # CONFIG_DMAR is not set
> CONFIG_PCIEPORTBUS=y
> CONFIG_HOTPLUG_PCI_PCIE=m
> CONFIG_PCIEAER=y
> CONFIG_ARCH_SUPPORTS_MSI=y
> CONFIG_PCI_MSI=y
> CONFIG_PCI_LEGACY=y
> # CONFIG_PCI_DEBUG is not set
> CONFIG_HT_IRQ=y
> CONFIG_ISA_DMA_API=y
> CONFIG_K8_NB=y
> CONFIG_PCCARD=y
> # CONFIG_PCMCIA_DEBUG is not set
> CONFIG_PCMCIA=y
> CONFIG_PCMCIA_LOAD_CIS=y
> CONFIG_PCMCIA_IOCTL=y
> CONFIG_CARDBUS=y
> 
> #
> # PC-card bridges
> #
> CONFIG_YENTA=y
> CONFIG_YENTA_O2=y
> CONFIG_YENTA_RICOH=y
> CONFIG_YENTA_TI=y
> CONFIG_YENTA_ENE_TUNE=y
> CONFIG_YENTA_TOSHIBA=y
> CONFIG_PD6729=m
> CONFIG_I82092=m
> CONFIG_PCCARD_NONSTATIC=y
> CONFIG_HOTPLUG_PCI=y
> CONFIG_HOTPLUG_PCI_FAKE=m
> CONFIG_HOTPLUG_PCI_ACPI=y
> CONFIG_HOTPLUG_PCI_ACPI_IBM=y
> # CONFIG_HOTPLUG_PCI_CPCI is not set
> CONFIG_HOTPLUG_PCI_SHPC=m
> 
> #
> # Executable file formats / Emulations
> #
> CONFIG_BINFMT_ELF=y
> CONFIG_BINFMT_MISC=y
> CONFIG_IA32_EMULATION=y
> # CONFIG_IA32_AOUT is not set
> CONFIG_COMPAT=y
> CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
> CONFIG_SYSVIPC_COMPAT=y
> 
> #
> # Networking
> #
> CONFIG_NET=y
> 
> #
> # Networking options
> #
> CONFIG_PACKET=y
> CONFIG_PACKET_MMAP=y
> CONFIG_UNIX=y
> CONFIG_XFRM=y
> CONFIG_XFRM_USER=y
> # CONFIG_XFRM_SUB_POLICY is not set
> # CONFIG_XFRM_MIGRATE is not set
> CONFIG_NET_KEY=m
> # CONFIG_NET_KEY_MIGRATE is not set
> CONFIG_INET=y
> CONFIG_IP_MULTICAST=y
> CONFIG_IP_ADVANCED_ROUTER=y
> CONFIG_ASK_IP_FIB_HASH=y
> # CONFIG_IP_FIB_TRIE is not set
> CONFIG_IP_FIB_HASH=y
> CONFIG_IP_MULTIPLE_TABLES=y
> CONFIG_IP_ROUTE_MULTIPATH=y
> CONFIG_IP_ROUTE_VERBOSE=y
> # CONFIG_IP_PNP is not set
> CONFIG_NET_IPIP=m
> CONFIG_NET_IPGRE=m
> CONFIG_NET_IPGRE_BROADCAST=y
> CONFIG_IP_MROUTE=y
> CONFIG_IP_PIMSM_V1=y
> CONFIG_IP_PIMSM_V2=y
> # CONFIG_ARPD is not set
> CONFIG_SYN_COOKIES=y
> CONFIG_INET_AH=m
> CONFIG_INET_ESP=m
> CONFIG_INET_IPCOMP=m
> CONFIG_INET_XFRM_TUNNEL=m
> CONFIG_INET_TUNNEL=m
> CONFIG_INET_XFRM_MODE_TRANSPORT=y
> CONFIG_INET_XFRM_MODE_TUNNEL=y
> CONFIG_INET_XFRM_MODE_BEET=y
> # CONFIG_INET_LRO is not set
> CONFIG_INET_DIAG=y
> CONFIG_INET_TCP_DIAG=y
> # CONFIG_TCP_CONG_ADVANCED is not set
> CONFIG_TCP_CONG_CUBIC=y
> CONFIG_DEFAULT_TCP_CONG="cubic"
> # CONFIG_TCP_MD5SIG is not set
> CONFIG_IP_VS=m
> # CONFIG_IP_VS_DEBUG is not set
> CONFIG_IP_VS_TAB_BITS=12
> 
> #
> # IPVS transport protocol load balancing support
> #
> CONFIG_IP_VS_PROTO_TCP=y
> CONFIG_IP_VS_PROTO_UDP=y
> CONFIG_IP_VS_PROTO_ESP=y
> CONFIG_IP_VS_PROTO_AH=y
> 
> #
> # IPVS scheduler
> #
> CONFIG_IP_VS_RR=m
> CONFIG_IP_VS_WRR=m
> CONFIG_IP_VS_LC=m
> CONFIG_IP_VS_WLC=m
> CONFIG_IP_VS_LBLC=m
> CONFIG_IP_VS_LBLCR=m
> CONFIG_IP_VS_DH=m
> CONFIG_IP_VS_SH=m
> CONFIG_IP_VS_SED=m
> CONFIG_IP_VS_NQ=m
> 
> #
> # IPVS application helper
> #
> CONFIG_IP_VS_FTP=m
> CONFIG_IPV6=y
> CONFIG_IPV6_PRIVACY=y
> # CONFIG_IPV6_ROUTER_PREF is not set
> # CONFIG_IPV6_OPTIMISTIC_DAD is not set
> CONFIG_INET6_AH=m
> CONFIG_INET6_ESP=m
> CONFIG_INET6_IPCOMP=m
> # CONFIG_IPV6_MIP6 is not set
> CONFIG_INET6_XFRM_TUNNEL=m
> CONFIG_INET6_TUNNEL=m
> CONFIG_INET6_XFRM_MODE_TRANSPORT=m
> CONFIG_INET6_XFRM_MODE_TUNNEL=m
> CONFIG_INET6_XFRM_MODE_BEET=m
> # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
> CONFIG_IPV6_SIT=m
> CONFIG_IPV6_TUNNEL=m
> # CONFIG_IPV6_MULTIPLE_TABLES is not set
> # CONFIG_NETLABEL is not set
> CONFIG_NETWORK_SECMARK=y
> CONFIG_NETFILTER=y
> # CONFIG_NETFILTER_DEBUG is not set
> CONFIG_BRIDGE_NETFILTER=y
> 
> #
> # Core Netfilter Configuration
> #
> CONFIG_NETFILTER_NETLINK=m
> CONFIG_NETFILTER_NETLINK_QUEUE=m
> CONFIG_NETFILTER_NETLINK_LOG=m
> # CONFIG_NF_CONNTRACK_ENABLED is not set
> # CONFIG_NF_CONNTRACK is not set
> # CONFIG_NETFILTER_XTABLES is not set
> 
> #
> # IP: Netfilter Configuration
> #
> CONFIG_IP_NF_QUEUE=m
> # CONFIG_IP_NF_IPTABLES is not set
> # CONFIG_IP_NF_ARPTABLES is not set
> 
> #
> # IPv6: Netfilter Configuration (EXPERIMENTAL)
> #
> # CONFIG_IP6_NF_QUEUE is not set
> # CONFIG_IP6_NF_IPTABLES is not set
> 
> #
> # Bridge: Netfilter Configuration
> #
> CONFIG_BRIDGE_NF_EBTABLES=m
> CONFIG_BRIDGE_EBT_BROUTE=m
> CONFIG_BRIDGE_EBT_T_FILTER=m
> CONFIG_BRIDGE_EBT_T_NAT=m
> CONFIG_BRIDGE_EBT_802_3=m
> CONFIG_BRIDGE_EBT_AMONG=m
> CONFIG_BRIDGE_EBT_ARP=m
> CONFIG_BRIDGE_EBT_IP=m
> CONFIG_BRIDGE_EBT_LIMIT=m
> CONFIG_BRIDGE_EBT_MARK=m
> CONFIG_BRIDGE_EBT_PKTTYPE=m
> CONFIG_BRIDGE_EBT_STP=m
> CONFIG_BRIDGE_EBT_VLAN=m
> CONFIG_BRIDGE_EBT_ARPREPLY=m
> CONFIG_BRIDGE_EBT_DNAT=m
> CONFIG_BRIDGE_EBT_MARK_T=m
> CONFIG_BRIDGE_EBT_REDIRECT=m
> CONFIG_BRIDGE_EBT_SNAT=m
> CONFIG_BRIDGE_EBT_LOG=m
> CONFIG_BRIDGE_EBT_ULOG=m
> # CONFIG_IP_DCCP is not set
> CONFIG_IP_SCTP=m
> # CONFIG_SCTP_DBG_MSG is not set
> # CONFIG_SCTP_DBG_OBJCNT is not set
> # CONFIG_SCTP_HMAC_NONE is not set
> # CONFIG_SCTP_HMAC_SHA1 is not set
> CONFIG_SCTP_HMAC_MD5=y
> # CONFIG_TIPC is not set
> CONFIG_ATM=m
> CONFIG_ATM_CLIP=m
> # CONFIG_ATM_CLIP_NO_ICMP is not set
> CONFIG_ATM_LANE=m
> # CONFIG_ATM_MPOA is not set
> CONFIG_ATM_BR2684=m
> # CONFIG_ATM_BR2684_IPFILTER is not set
> CONFIG_BRIDGE=m
> CONFIG_VLAN_8021Q=m
> # CONFIG_DECNET is not set
> CONFIG_LLC=y
> # CONFIG_LLC2 is not set
> # CONFIG_IPX is not set
> # CONFIG_ATALK is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
> CONFIG_NET_SCHED=y
> 
> #
> # Queueing/Scheduling
> #
> CONFIG_NET_SCH_CBQ=m
> CONFIG_NET_SCH_HTB=m
> CONFIG_NET_SCH_HFSC=m
> CONFIG_NET_SCH_ATM=m
> CONFIG_NET_SCH_PRIO=m
> # CONFIG_NET_SCH_RR is not set
> CONFIG_NET_SCH_RED=m
> CONFIG_NET_SCH_SFQ=m
> CONFIG_NET_SCH_TEQL=m
> CONFIG_NET_SCH_TBF=m
> CONFIG_NET_SCH_GRED=m
> CONFIG_NET_SCH_DSMARK=m
> CONFIG_NET_SCH_NETEM=m
> CONFIG_NET_SCH_INGRESS=m
> 
> #
> # Classification
> #
> CONFIG_NET_CLS=y
> CONFIG_NET_CLS_BASIC=m
> CONFIG_NET_CLS_TCINDEX=m
> CONFIG_NET_CLS_ROUTE4=m
> CONFIG_NET_CLS_ROUTE=y
> CONFIG_NET_CLS_FW=m
> CONFIG_NET_CLS_U32=m
> CONFIG_CLS_U32_PERF=y
> CONFIG_CLS_U32_MARK=y
> CONFIG_NET_CLS_RSVP=m
> CONFIG_NET_CLS_RSVP6=m
> CONFIG_NET_EMATCH=y
> CONFIG_NET_EMATCH_STACK=32
> CONFIG_NET_EMATCH_CMP=m
> CONFIG_NET_EMATCH_NBYTE=m
> CONFIG_NET_EMATCH_U32=m
> CONFIG_NET_EMATCH_META=m
> CONFIG_NET_EMATCH_TEXT=m
> CONFIG_NET_CLS_ACT=y
> CONFIG_NET_ACT_POLICE=y
> # CONFIG_NET_ACT_GACT is not set
> # CONFIG_NET_ACT_MIRRED is not set
> # CONFIG_NET_ACT_NAT is not set
> # CONFIG_NET_ACT_PEDIT is not set
> # CONFIG_NET_ACT_SIMP is not set
> CONFIG_NET_CLS_POLICE=y
> CONFIG_NET_CLS_IND=y
> CONFIG_NET_SCH_FIFO=y
> 
> #
> # Network testing
> #
> # CONFIG_NET_PKTGEN is not set
> # CONFIG_NET_TCPPROBE is not set
> # CONFIG_HAMRADIO is not set
> # CONFIG_IRDA is not set
> CONFIG_BT=m
> CONFIG_BT_L2CAP=m
> CONFIG_BT_SCO=m
> CONFIG_BT_RFCOMM=m
> CONFIG_BT_RFCOMM_TTY=y
> CONFIG_BT_BNEP=m
> CONFIG_BT_BNEP_MC_FILTER=y
> CONFIG_BT_BNEP_PROTO_FILTER=y
> CONFIG_BT_CMTP=m
> CONFIG_BT_HIDP=m
> 
> #
> # Bluetooth device drivers
> #
> CONFIG_BT_HCIUSB=m
> CONFIG_BT_HCIUSB_SCO=y
> CONFIG_BT_HCIUART=m
> CONFIG_BT_HCIUART_H4=y
> CONFIG_BT_HCIUART_BCSP=y
> # CONFIG_BT_HCIUART_LL is not set
> CONFIG_BT_HCIBCM203X=m
> CONFIG_BT_HCIBPA10X=m
> CONFIG_BT_HCIBFUSB=m
> # CONFIG_BT_HCIDTL1 is not set
> # CONFIG_BT_HCIBT3C is not set
> # CONFIG_BT_HCIBLUECARD is not set
> # CONFIG_BT_HCIBTUART is not set
> CONFIG_BT_HCIVHCI=m
> # CONFIG_AF_RXRPC is not set
> CONFIG_FIB_RULES=y
> 
> #
> # Wireless
> #
> # CONFIG_CFG80211 is not set
> CONFIG_WIRELESS_EXT=y
> # CONFIG_MAC80211 is not set
> CONFIG_IEEE80211=m
> # CONFIG_IEEE80211_DEBUG is not set
> CONFIG_IEEE80211_CRYPT_WEP=m
> CONFIG_IEEE80211_CRYPT_CCMP=m
> CONFIG_IEEE80211_CRYPT_TKIP=m
> # CONFIG_IEEE80211_SOFTMAC is not set
> # CONFIG_RFKILL is not set
> # CONFIG_NET_9P is not set
> 
> #
> # Device Drivers
> #
> 
> #
> # Generic Driver Options
> #
> CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
> CONFIG_STANDALONE=y
> CONFIG_PREVENT_FIRMWARE_BUILD=y
> CONFIG_FW_LOADER=y
> # CONFIG_DEBUG_DRIVER is not set
> # CONFIG_DEBUG_DEVRES is not set
> # CONFIG_SYS_HYPERVISOR is not set
> # CONFIG_CONNECTOR is not set
> CONFIG_MTD=m
> # CONFIG_MTD_DEBUG is not set
> CONFIG_MTD_CONCAT=m
> CONFIG_MTD_PARTITIONS=y
> CONFIG_MTD_REDBOOT_PARTS=m
> CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
> # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
> # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
> 
> #
> # User Modules And Translation Layers
> #
> CONFIG_MTD_CHAR=m
> CONFIG_MTD_BLKDEVS=m
> CONFIG_MTD_BLOCK=m
> CONFIG_MTD_BLOCK_RO=m
> CONFIG_FTL=m
> CONFIG_NFTL=m
> CONFIG_NFTL_RW=y
> # CONFIG_INFTL is not set
> # CONFIG_RFD_FTL is not set
> # CONFIG_SSFDC is not set
> # CONFIG_MTD_OOPS is not set
> 
> #
> # RAM/ROM/Flash chip drivers
> #
> CONFIG_MTD_CFI=m
> CONFIG_MTD_JEDECPROBE=m
> CONFIG_MTD_GEN_PROBE=m
> # CONFIG_MTD_CFI_ADV_OPTIONS is not set
> CONFIG_MTD_MAP_BANK_WIDTH_1=y
> CONFIG_MTD_MAP_BANK_WIDTH_2=y
> CONFIG_MTD_MAP_BANK_WIDTH_4=y
> # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
> # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
> # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
> CONFIG_MTD_CFI_I1=y
> CONFIG_MTD_CFI_I2=y
> # CONFIG_MTD_CFI_I4 is not set
> # CONFIG_MTD_CFI_I8 is not set
> CONFIG_MTD_CFI_INTELEXT=m
> CONFIG_MTD_CFI_AMDSTD=m
> CONFIG_MTD_CFI_STAA=m
> CONFIG_MTD_CFI_UTIL=m
> CONFIG_MTD_RAM=m
> CONFIG_MTD_ROM=m
> CONFIG_MTD_ABSENT=m
> 
> #
> # Mapping drivers for chip access
> #
> # CONFIG_MTD_COMPLEX_MAPPINGS is not set
> # CONFIG_MTD_PHYSMAP is not set
> # CONFIG_MTD_PNC2000 is not set
> CONFIG_MTD_SC520CDP=m
> CONFIG_MTD_NETSC520=m
> CONFIG_MTD_TS5500=m
> # CONFIG_MTD_AMD76XROM is not set
> # CONFIG_MTD_ICHXROM is not set
> # CONFIG_MTD_ESB2ROM is not set
> # CONFIG_MTD_CK804XROM is not set
> # CONFIG_MTD_SCB2_FLASH is not set
> # CONFIG_MTD_NETtel is not set
> # CONFIG_MTD_DILNETPC is not set
> # CONFIG_MTD_L440GX is not set
> # CONFIG_MTD_INTEL_VR_NOR is not set
> CONFIG_MTD_PLATRAM=m
> 
> #
> # Self-contained MTD device drivers
> #
> # CONFIG_MTD_PMC551 is not set
> # CONFIG_MTD_SLRAM is not set
> # CONFIG_MTD_PHRAM is not set
> CONFIG_MTD_MTDRAM=m
> CONFIG_MTDRAM_TOTAL_SIZE=4096
> CONFIG_MTDRAM_ERASE_SIZE=128
> CONFIG_MTD_BLOCK2MTD=m
> 
> #
> # Disk-On-Chip Device Drivers
> #
> # CONFIG_MTD_DOC2000 is not set
> # CONFIG_MTD_DOC2001 is not set
> # CONFIG_MTD_DOC2001PLUS is not set
> CONFIG_MTD_NAND=m
> # CONFIG_MTD_NAND_VERIFY_WRITE is not set
> # CONFIG_MTD_NAND_ECC_SMC is not set
> # CONFIG_MTD_NAND_MUSEUM_IDS is not set
> CONFIG_MTD_NAND_IDS=m
> # CONFIG_MTD_NAND_DISKONCHIP is not set
> # CONFIG_MTD_NAND_CAFE is not set
> # CONFIG_MTD_NAND_NANDSIM is not set
> # CONFIG_MTD_NAND_PLATFORM is not set
> # CONFIG_MTD_ALAUDA is not set
> # CONFIG_MTD_ONENAND is not set
> 
> #
> # UBI - Unsorted block images
> #
> # CONFIG_MTD_UBI is not set
> CONFIG_PARPORT=y
> CONFIG_PARPORT_PC=y
> CONFIG_PARPORT_SERIAL=m
> # CONFIG_PARPORT_PC_FIFO is not set
> # CONFIG_PARPORT_PC_SUPERIO is not set
> # CONFIG_PARPORT_PC_PCMCIA is not set
> # CONFIG_PARPORT_GSC is not set
> # CONFIG_PARPORT_AX88796 is not set
> CONFIG_PARPORT_1284=y
> CONFIG_PARPORT_NOT_PC=y
> CONFIG_PNP=y
> # CONFIG_PNP_DEBUG is not set
> 
> #
> # Protocols
> #
> CONFIG_PNPACPI=y
> CONFIG_BLK_DEV=y
> CONFIG_BLK_DEV_FD=m
> # CONFIG_PARIDE is not set
> CONFIG_BLK_CPQ_DA=y
> CONFIG_BLK_CPQ_CISS_DA=m
> CONFIG_CISS_SCSI_TAPE=y
> CONFIG_BLK_DEV_DAC960=m
> # CONFIG_BLK_DEV_UMEM is not set
> # CONFIG_BLK_DEV_COW_COMMON is not set
> CONFIG_BLK_DEV_LOOP=m
> CONFIG_BLK_DEV_CRYPTOLOOP=m
> CONFIG_BLK_DEV_NBD=m
> CONFIG_BLK_DEV_SX8=m
> # CONFIG_BLK_DEV_UB is not set
> CONFIG_BLK_DEV_RAM=y
> CONFIG_BLK_DEV_RAM_COUNT=16
> CONFIG_BLK_DEV_RAM_SIZE=16384
> CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
> CONFIG_CDROM_PKTCDVD=y
> CONFIG_CDROM_PKTCDVD_BUFFERS=8
> # CONFIG_CDROM_PKTCDVD_WCACHE is not set
> # CONFIG_ATA_OVER_ETH is not set
> CONFIG_MISC_DEVICES=y
> CONFIG_IBM_ASM=m
> # CONFIG_PHANTOM is not set
> # CONFIG_EEPROM_93CX6 is not set
> # CONFIG_SGI_IOC4 is not set
> # CONFIG_TIFM_CORE is not set
> # CONFIG_FUJITSU_LAPTOP is not set
> # CONFIG_MSI_LAPTOP is not set
> # CONFIG_SONY_LAPTOP is not set
> # CONFIG_THINKPAD_ACPI is not set
> # CONFIG_IDE is not set
> 
> #
> # SCSI device support
> #
> CONFIG_RAID_ATTRS=m
> CONFIG_SCSI=y
> CONFIG_SCSI_DMA=y
> CONFIG_SCSI_TGT=m
> CONFIG_SCSI_NETLINK=y
> CONFIG_SCSI_PROC_FS=y
> 
> #
> # SCSI support type (disk, tape, CD-ROM)
> #
> CONFIG_BLK_DEV_SD=y
> CONFIG_CHR_DEV_ST=m
> # CONFIG_CHR_DEV_OSST is not set
> CONFIG_BLK_DEV_SR=y
> CONFIG_BLK_DEV_SR_VENDOR=y
> CONFIG_CHR_DEV_SG=y
> CONFIG_CHR_DEV_SCH=y
> 
> #
> # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
> #
> CONFIG_SCSI_MULTI_LUN=y
> CONFIG_SCSI_CONSTANTS=y
> CONFIG_SCSI_LOGGING=y
> # CONFIG_SCSI_SCAN_ASYNC is not set
> CONFIG_SCSI_WAIT_SCAN=m
> 
> #
> # SCSI Transports
> #
> CONFIG_SCSI_SPI_ATTRS=y
> CONFIG_SCSI_FC_ATTRS=m
> # CONFIG_SCSI_FC_TGT_ATTRS is not set
> CONFIG_SCSI_ISCSI_ATTRS=m
> CONFIG_SCSI_SAS_ATTRS=y
> CONFIG_SCSI_SAS_LIBSAS=y
> # CONFIG_SCSI_SAS_ATA is not set
> # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
> # CONFIG_SCSI_SRP_ATTRS is not set
> CONFIG_SCSI_LOWLEVEL=y
> CONFIG_ISCSI_TCP=m
> CONFIG_BLK_DEV_3W_XXXX_RAID=m
> CONFIG_SCSI_3W_9XXX=m
> CONFIG_SCSI_ACARD=m
> CONFIG_SCSI_AACRAID=m
> CONFIG_SCSI_AIC7XXX=y
> CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
> CONFIG_AIC7XXX_RESET_DELAY_MS=1000
> # CONFIG_AIC7XXX_DEBUG_ENABLE is not set
> CONFIG_AIC7XXX_DEBUG_MASK=0
> # CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
> CONFIG_SCSI_AIC7XXX_OLD=m
> CONFIG_SCSI_AIC79XX=y
> CONFIG_AIC79XX_CMDS_PER_DEVICE=4
> CONFIG_AIC79XX_RESET_DELAY_MS=1000
> # CONFIG_AIC79XX_DEBUG_ENABLE is not set
> CONFIG_AIC79XX_DEBUG_MASK=0
> # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
> CONFIG_SCSI_AIC94XX=y
> # CONFIG_AIC94XX_DEBUG is not set
> # CONFIG_SCSI_ADVANSYS is not set
> CONFIG_SCSI_ARCMSR=m
> # CONFIG_SCSI_ARCMSR_AER is not set
> CONFIG_MEGARAID_NEWGEN=y
> CONFIG_MEGARAID_MM=m
> CONFIG_MEGARAID_MAILBOX=m
> CONFIG_MEGARAID_LEGACY=m
> CONFIG_MEGARAID_SAS=m
> CONFIG_SCSI_HPTIOP=m
> CONFIG_SCSI_BUSLOGIC=m
> # CONFIG_SCSI_OMIT_FLASHPOINT is not set
> # CONFIG_SCSI_DMX3191D is not set
> # CONFIG_SCSI_EATA is not set
> CONFIG_SCSI_FUTURE_DOMAIN=m
> CONFIG_SCSI_GDTH=m
> CONFIG_SCSI_IPS=m
> CONFIG_SCSI_INITIO=m
> CONFIG_SCSI_INIA100=m
> CONFIG_SCSI_PPA=m
> CONFIG_SCSI_IMM=m
> # CONFIG_SCSI_IZIP_EPP16 is not set
> # CONFIG_SCSI_IZIP_SLOW_CTR is not set
> CONFIG_SCSI_STEX=m
> CONFIG_SCSI_SYM53C8XX_2=m
> CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
> CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
> CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
> CONFIG_SCSI_SYM53C8XX_MMIO=y
> # CONFIG_SCSI_IPR is not set
> CONFIG_SCSI_QLOGIC_1280=m
> CONFIG_SCSI_QLA_FC=m
> CONFIG_SCSI_QLA_ISCSI=m
> CONFIG_SCSI_LPFC=m
> CONFIG_SCSI_DC395x=m
> CONFIG_SCSI_DC390T=m
> # CONFIG_SCSI_DEBUG is not set
> CONFIG_SCSI_SRP=m
> # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
> CONFIG_ATA=y
> # CONFIG_ATA_NONSTANDARD is not set
> CONFIG_ATA_ACPI=y
> CONFIG_SATA_AHCI=y
> CONFIG_SATA_SVW=y
> CONFIG_ATA_PIIX=y
> CONFIG_SATA_MV=y
> CONFIG_SATA_NV=y
> CONFIG_PDC_ADMA=y
> CONFIG_SATA_QSTOR=y
> CONFIG_SATA_PROMISE=y
> CONFIG_SATA_SX4=y
> CONFIG_SATA_SIL=y
> CONFIG_SATA_SIL24=y
> CONFIG_SATA_SIS=y
> CONFIG_SATA_ULI=y
> CONFIG_SATA_VIA=y
> CONFIG_SATA_VITESSE=y
> # CONFIG_SATA_INIC162X is not set
> # CONFIG_PATA_ACPI is not set
> CONFIG_PATA_ALI=y
> CONFIG_PATA_AMD=y
> CONFIG_PATA_ARTOP=y
> CONFIG_PATA_ATIIXP=y
> # CONFIG_PATA_CMD640_PCI is not set
> CONFIG_PATA_CMD64X=y
> CONFIG_PATA_CS5520=y
> CONFIG_PATA_CS5530=y
> CONFIG_PATA_CYPRESS=y
> CONFIG_PATA_EFAR=y
> CONFIG_ATA_GENERIC=y
> CONFIG_PATA_HPT366=y
> CONFIG_PATA_HPT37X=y
> CONFIG_PATA_HPT3X2N=y
> CONFIG_PATA_HPT3X3=y
> # CONFIG_PATA_HPT3X3_DMA is not set
> CONFIG_PATA_IT821X=y
> # CONFIG_PATA_IT8213 is not set
> CONFIG_PATA_JMICRON=y
> CONFIG_PATA_TRIFLEX=y
> CONFIG_PATA_MARVELL=y
> CONFIG_PATA_MPIIX=y
> CONFIG_PATA_OLDPIIX=y
> CONFIG_PATA_NETCELL=y
> CONFIG_PATA_NS87410=y
> # CONFIG_PATA_NS87415 is not set
> CONFIG_PATA_OPTI=y
> CONFIG_PATA_OPTIDMA=y
> # CONFIG_PATA_PCMCIA is not set
> CONFIG_PATA_PDC_OLD=y
> CONFIG_PATA_RADISYS=y
> CONFIG_PATA_RZ1000=y
> CONFIG_PATA_SC1200=y
> CONFIG_PATA_SERVERWORKS=y
> CONFIG_PATA_PDC2027X=y
> CONFIG_PATA_SIL680=y
> CONFIG_PATA_SIS=y
> CONFIG_PATA_VIA=y
> CONFIG_PATA_WINBOND=y
> CONFIG_MD=y
> CONFIG_BLK_DEV_MD=y
> CONFIG_MD_LINEAR=m
> CONFIG_MD_RAID0=m
> CONFIG_MD_RAID1=m
> CONFIG_MD_RAID10=m
> # CONFIG_MD_RAID456 is not set
> CONFIG_MD_MULTIPATH=m
> CONFIG_MD_FAULTY=m
> CONFIG_BLK_DEV_DM=m
> # CONFIG_DM_DEBUG is not set
> CONFIG_DM_CRYPT=m
> CONFIG_DM_SNAPSHOT=m
> CONFIG_DM_MIRROR=m
> CONFIG_DM_ZERO=m
> CONFIG_DM_MULTIPATH=m
> CONFIG_DM_MULTIPATH_EMC=m
> # CONFIG_DM_MULTIPATH_RDAC is not set
> # CONFIG_DM_MULTIPATH_HP is not set
> # CONFIG_DM_DELAY is not set
> # CONFIG_DM_UEVENT is not set
> CONFIG_FUSION=y
> CONFIG_FUSION_SPI=y
> CONFIG_FUSION_FC=m
> CONFIG_FUSION_SAS=m
> CONFIG_FUSION_MAX_SGE=128
> CONFIG_FUSION_CTL=y
> CONFIG_FUSION_LAN=m
> # CONFIG_FUSION_LOGGING is not set
> 
> #
> # IEEE 1394 (FireWire) support
> #
> # CONFIG_FIREWIRE is not set
> # CONFIG_IEEE1394 is not set
> CONFIG_I2O=m
> CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
> CONFIG_I2O_EXT_ADAPTEC=y
> CONFIG_I2O_EXT_ADAPTEC_DMA64=y
> CONFIG_I2O_CONFIG=m
> CONFIG_I2O_CONFIG_OLD_IOCTL=y
> CONFIG_I2O_BUS=m
> CONFIG_I2O_BLOCK=m
> CONFIG_I2O_SCSI=m
> CONFIG_I2O_PROC=m
> # CONFIG_MACINTOSH_DRIVERS is not set
> CONFIG_NETDEVICES=y
> # CONFIG_NETDEVICES_MULTIQUEUE is not set
> # CONFIG_IFB is not set
> CONFIG_DUMMY=m
> CONFIG_BONDING=m
> # CONFIG_MACVLAN is not set
> # CONFIG_EQUALIZER is not set
> CONFIG_TUN=m
> # CONFIG_VETH is not set
> # CONFIG_NET_SB1000 is not set
> # CONFIG_IP1000 is not set
> # CONFIG_ARCNET is not set
> # CONFIG_PHYLIB is not set
> CONFIG_NET_ETHERNET=y
> CONFIG_MII=y
> CONFIG_HAPPYMEAL=m
> CONFIG_SUNGEM=m
> # CONFIG_CASSINI is not set
> CONFIG_NET_VENDOR_3COM=y
> CONFIG_VORTEX=m
> CONFIG_TYPHOON=m
> CONFIG_NET_TULIP=y
> CONFIG_DE2104X=m
> CONFIG_TULIP=m
> # CONFIG_TULIP_MWI is not set
> CONFIG_TULIP_MMIO=y
> # CONFIG_TULIP_NAPI is not set
> CONFIG_DE4X5=m
> CONFIG_WINBOND_840=m
> CONFIG_DM9102=m
> # CONFIG_ULI526X is not set
> # CONFIG_PCMCIA_XIRCOM is not set
> CONFIG_HP100=m
> # CONFIG_IBM_NEW_EMAC_ZMII is not set
> # CONFIG_IBM_NEW_EMAC_RGMII is not set
> # CONFIG_IBM_NEW_EMAC_TAH is not set
> # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
> CONFIG_NET_PCI=y
> CONFIG_PCNET32=m
> # CONFIG_PCNET32_NAPI is not set
> CONFIG_AMD8111_ETH=m
> CONFIG_AMD8111E_NAPI=y
> CONFIG_ADAPTEC_STARFIRE=m
> CONFIG_ADAPTEC_STARFIRE_NAPI=y
> CONFIG_B44=m
> CONFIG_B44_PCI_AUTOSELECT=y
> CONFIG_B44_PCICORE_AUTOSELECT=y
> CONFIG_B44_PCI=y
> CONFIG_FORCEDETH=y
> CONFIG_FORCEDETH_NAPI=y
> CONFIG_EEPRO100=m
> CONFIG_E100=y
> CONFIG_FEALNX=m
> CONFIG_NATSEMI=m
> CONFIG_NE2K_PCI=m
> CONFIG_8139CP=m
> CONFIG_8139TOO=y
> # CONFIG_8139TOO_PIO is not set
> # CONFIG_8139TOO_TUNE_TWISTER is not set
> CONFIG_8139TOO_8129=y
> # CONFIG_8139_OLD_RX_RESET is not set
> CONFIG_SIS900=m
> CONFIG_EPIC100=m
> # CONFIG_SUNDANCE is not set
> CONFIG_VIA_RHINE=y
> CONFIG_VIA_RHINE_MMIO=y
> # CONFIG_VIA_RHINE_NAPI is not set
> # CONFIG_SC92031 is not set
> CONFIG_NET_POCKET=y
> # CONFIG_ATP is not set
> # CONFIG_DE600 is not set
> # CONFIG_DE620 is not set
> CONFIG_NETDEV_1000=y
> CONFIG_ACENIC=m
> # CONFIG_ACENIC_OMIT_TIGON_I is not set
> CONFIG_DL2K=m
> CONFIG_E1000=y
> CONFIG_E1000_NAPI=y
> # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
> # CONFIG_E1000E is not set
> CONFIG_NS83820=m
> # CONFIG_HAMACHI is not set
> # CONFIG_YELLOWFIN is not set
> CONFIG_R8169=y
> CONFIG_R8169_NAPI=y
> CONFIG_R8169_VLAN=y
> # CONFIG_SIS190 is not set
> CONFIG_SKGE=y
> # CONFIG_SKGE_DEBUG is not set
> # CONFIG_SKY2 is not set
> # CONFIG_SK98LIN is not set
> CONFIG_VIA_VELOCITY=m
> CONFIG_TIGON3=y
> CONFIG_BNX2=m
> # CONFIG_QLA3XXX is not set
> # CONFIG_ATL1 is not set
> CONFIG_NETDEV_10000=y
> # CONFIG_CHELSIO_T1 is not set
> # CONFIG_CHELSIO_T3 is not set
> # CONFIG_IXGBE is not set
> CONFIG_IXGB=m
> CONFIG_IXGB_NAPI=y
> CONFIG_S2IO=m
> CONFIG_S2IO_NAPI=y
> # CONFIG_MYRI10GE is not set
> # CONFIG_NETXEN_NIC is not set
> # CONFIG_NIU is not set
> # CONFIG_MLX4_CORE is not set
> # CONFIG_TEHUTI is not set
> CONFIG_TR=y
> CONFIG_IBMOL=m
> CONFIG_3C359=m
> CONFIG_TMS380TR=m
> CONFIG_TMSPCI=m
> CONFIG_ABYSS=m
> 
> #
> # Wireless LAN
> #
> # CONFIG_WLAN_PRE80211 is not set
> # CONFIG_WLAN_80211 is not set
> 
> #
> # USB Network Adapters
> #
> CONFIG_USB_CATC=m
> CONFIG_USB_KAWETH=m
> CONFIG_USB_PEGASUS=m
> CONFIG_USB_RTL8150=m
> CONFIG_USB_USBNET=m
> CONFIG_USB_NET_AX8817X=m
> CONFIG_USB_NET_CDCETHER=m
> # CONFIG_USB_NET_DM9601 is not set
> CONFIG_USB_NET_GL620A=m
> CONFIG_USB_NET_NET1080=m
> CONFIG_USB_NET_PLUSB=m
> # CONFIG_USB_NET_MCS7830 is not set
> CONFIG_USB_NET_RNDIS_HOST=m
> CONFIG_USB_NET_CDC_SUBSET=m
> CONFIG_USB_ALI_M5632=y
> CONFIG_USB_AN2720=y
> CONFIG_USB_BELKIN=y
> CONFIG_USB_ARMLINUX=y
> CONFIG_USB_EPSON2888=y
> # CONFIG_USB_KC2190 is not set
> CONFIG_USB_NET_ZAURUS=m
> # CONFIG_NET_PCMCIA is not set
> # CONFIG_WAN is not set
> CONFIG_ATM_DRIVERS=y
> # CONFIG_ATM_DUMMY is not set
> CONFIG_ATM_TCP=m
> CONFIG_ATM_LANAI=m
> CONFIG_ATM_ENI=m
> # CONFIG_ATM_ENI_DEBUG is not set
> # CONFIG_ATM_ENI_TUNE_BURST is not set
> CONFIG_ATM_FIRESTREAM=m
> # CONFIG_ATM_ZATM is not set
> CONFIG_ATM_IDT77252=m
> # CONFIG_ATM_IDT77252_DEBUG is not set
> # CONFIG_ATM_IDT77252_RCV_ALL is not set
> CONFIG_ATM_IDT77252_USE_SUNI=y
> CONFIG_ATM_AMBASSADOR=m
> # CONFIG_ATM_AMBASSADOR_DEBUG is not set
> CONFIG_ATM_HORIZON=m
> # CONFIG_ATM_HORIZON_DEBUG is not set
> CONFIG_ATM_FORE200E_MAYBE=m
> # CONFIG_ATM_FORE200E_PCA is not set
> CONFIG_ATM_HE=m
> # CONFIG_ATM_HE_USE_SUNI is not set
> CONFIG_FDDI=y
> # CONFIG_DEFXX is not set
> # CONFIG_SKFP is not set
> # CONFIG_HIPPI is not set
> # CONFIG_PLIP is not set
> CONFIG_PPP=m
> CONFIG_PPP_MULTILINK=y
> CONFIG_PPP_FILTER=y
> CONFIG_PPP_ASYNC=m
> CONFIG_PPP_SYNC_TTY=m
> CONFIG_PPP_DEFLATE=m
> # CONFIG_PPP_BSDCOMP is not set
> # CONFIG_PPP_MPPE is not set
> CONFIG_PPPOE=m
> CONFIG_PPPOATM=m
> # CONFIG_PPPOL2TP is not set
> # CONFIG_SLIP is not set
> CONFIG_SLHC=m
> CONFIG_NET_FC=y
> # CONFIG_SHAPER is not set
> CONFIG_NETCONSOLE=y
> # CONFIG_NETCONSOLE_DYNAMIC is not set
> CONFIG_NETPOLL=y
> # CONFIG_NETPOLL_TRAP is not set
> CONFIG_NET_POLL_CONTROLLER=y
> CONFIG_ISDN=m
> CONFIG_ISDN_I4L=m
> CONFIG_ISDN_PPP=y
> CONFIG_ISDN_PPP_VJ=y
> CONFIG_ISDN_MPP=y
> CONFIG_IPPP_FILTER=y
> # CONFIG_ISDN_PPP_BSDCOMP is not set
> CONFIG_ISDN_AUDIO=y
> CONFIG_ISDN_TTY_FAX=y
> 
> #
> # ISDN feature submodules
> #
> CONFIG_ISDN_DIVERSION=m
> 
> #
> # ISDN4Linux hardware drivers
> #
> 
> #
> # Passive cards
> #
> CONFIG_ISDN_DRV_HISAX=m
> 
> #
> # D-channel protocol features
> #
> CONFIG_HISAX_EURO=y
> CONFIG_DE_AOC=y
> CONFIG_HISAX_NO_SENDCOMPLETE=y
> CONFIG_HISAX_NO_LLC=y
> CONFIG_HISAX_NO_KEYPAD=y
> CONFIG_HISAX_1TR6=y
> CONFIG_HISAX_NI1=y
> CONFIG_HISAX_MAX_CARDS=8
> 
> #
> # HiSax supported cards
> #
> CONFIG_HISAX_16_3=y
> CONFIG_HISAX_TELESPCI=y
> CONFIG_HISAX_S0BOX=y
> CONFIG_HISAX_FRITZPCI=y
> CONFIG_HISAX_AVM_A1_PCMCIA=y
> CONFIG_HISAX_ELSA=y
> CONFIG_HISAX_DIEHLDIVA=y
> CONFIG_HISAX_SEDLBAUER=y
> CONFIG_HISAX_NETJET=y
> CONFIG_HISAX_NETJET_U=y
> CONFIG_HISAX_NICCY=y
> CONFIG_HISAX_BKM_A4T=y
> CONFIG_HISAX_SCT_QUADRO=y
> CONFIG_HISAX_GAZEL=y
> CONFIG_HISAX_HFC_PCI=y
> CONFIG_HISAX_W6692=y
> CONFIG_HISAX_HFC_SX=y
> CONFIG_HISAX_ENTERNOW_PCI=y
> # CONFIG_HISAX_DEBUG is not set
> 
> #
> # HiSax PCMCIA card service modules
> #
> # CONFIG_HISAX_SEDLBAUER_CS is not set
> # CONFIG_HISAX_ELSA_CS is not set
> # CONFIG_HISAX_AVM_A1_CS is not set
> # CONFIG_HISAX_TELES_CS is not set
> 
> #
> # HiSax sub driver modules
> #
> CONFIG_HISAX_ST5481=m
> CONFIG_HISAX_HFCUSB=m
> CONFIG_HISAX_HFC4S8S=m
> CONFIG_HISAX_FRITZ_PCIPNP=m
> CONFIG_HISAX_HDLC=y
> 
> #
> # Active cards
> #
> # CONFIG_ISDN_DRV_GIGASET is not set
> CONFIG_ISDN_CAPI=m
> CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
> CONFIG_CAPI_TRACE=y
> CONFIG_ISDN_CAPI_MIDDLEWARE=y
> CONFIG_ISDN_CAPI_CAPI20=m
> CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
> CONFIG_ISDN_CAPI_CAPIFS=m
> CONFIG_ISDN_CAPI_CAPIDRV=m
> 
> #
> # CAPI hardware drivers
> #
> CONFIG_CAPI_AVM=y
> CONFIG_ISDN_DRV_AVMB1_B1PCI=m
> CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
> CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
> # CONFIG_ISDN_DRV_AVMB1_AVM_CS is not set
> CONFIG_ISDN_DRV_AVMB1_T1PCI=m
> CONFIG_ISDN_DRV_AVMB1_C4=m
> CONFIG_CAPI_EICON=y
> CONFIG_ISDN_DIVAS=m
> CONFIG_ISDN_DIVAS_BRIPCI=y
> CONFIG_ISDN_DIVAS_PRIPCI=y
> CONFIG_ISDN_DIVAS_DIVACAPI=m
> CONFIG_ISDN_DIVAS_USERIDI=m
> CONFIG_ISDN_DIVAS_MAINT=m
> # CONFIG_PHONE is not set
> 
> #
> # Input device support
> #
> CONFIG_INPUT=y
> CONFIG_INPUT_FF_MEMLESS=y
> # CONFIG_INPUT_POLLDEV is not set
> 
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=y
> # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> CONFIG_INPUT_JOYDEV=m
> CONFIG_INPUT_EVDEV=y
> # CONFIG_INPUT_EVBUG is not set
> 
> #
> # Input Device Drivers
> #
> CONFIG_INPUT_KEYBOARD=y
> CONFIG_KEYBOARD_ATKBD=y
> # CONFIG_KEYBOARD_SUNKBD is not set
> # CONFIG_KEYBOARD_LKKBD is not set
> # CONFIG_KEYBOARD_XTKBD is not set
> # CONFIG_KEYBOARD_NEWTON is not set
> # CONFIG_KEYBOARD_STOWAWAY is not set
> CONFIG_INPUT_MOUSE=y
> CONFIG_MOUSE_PS2=y
> CONFIG_MOUSE_PS2_ALPS=y
> CONFIG_MOUSE_PS2_LOGIPS2PP=y
> CONFIG_MOUSE_PS2_SYNAPTICS=y
> CONFIG_MOUSE_PS2_LIFEBOOK=y
> CONFIG_MOUSE_PS2_TRACKPOINT=y
> # CONFIG_MOUSE_PS2_TOUCHKIT is not set
> CONFIG_MOUSE_SERIAL=m
> # CONFIG_MOUSE_APPLETOUCH is not set
> CONFIG_MOUSE_VSXXXAA=m
> CONFIG_INPUT_JOYSTICK=y
> # CONFIG_JOYSTICK_ANALOG is not set
> # CONFIG_JOYSTICK_A3D is not set
> # CONFIG_JOYSTICK_ADI is not set
> # CONFIG_JOYSTICK_COBRA is not set
> # CONFIG_JOYSTICK_GF2K is not set
> # CONFIG_JOYSTICK_GRIP is not set
> # CONFIG_JOYSTICK_GRIP_MP is not set
> # CONFIG_JOYSTICK_GUILLEMOT is not set
> # CONFIG_JOYSTICK_INTERACT is not set
> # CONFIG_JOYSTICK_SIDEWINDER is not set
> # CONFIG_JOYSTICK_TMDC is not set
> # CONFIG_JOYSTICK_IFORCE is not set
> # CONFIG_JOYSTICK_WARRIOR is not set
> # CONFIG_JOYSTICK_MAGELLAN is not set
> # CONFIG_JOYSTICK_SPACEORB is not set
> # CONFIG_JOYSTICK_SPACEBALL is not set
> # CONFIG_JOYSTICK_STINGER is not set
> CONFIG_JOYSTICK_TWIDJOY=m
> # CONFIG_JOYSTICK_DB9 is not set
> # CONFIG_JOYSTICK_GAMECON is not set
> # CONFIG_JOYSTICK_TURBOGRAFX is not set
> CONFIG_JOYSTICK_JOYDUMP=m
> # CONFIG_JOYSTICK_XPAD is not set
> # CONFIG_INPUT_TABLET is not set
> CONFIG_INPUT_TOUCHSCREEN=y
> # CONFIG_TOUCHSCREEN_FUJITSU is not set
> CONFIG_TOUCHSCREEN_GUNZE=m
> CONFIG_TOUCHSCREEN_ELO=m
> CONFIG_TOUCHSCREEN_MTOUCH=m
> CONFIG_TOUCHSCREEN_MK712=m
> # CONFIG_TOUCHSCREEN_PENMOUNT is not set
> # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
> # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
> # CONFIG_TOUCHSCREEN_UCB1400 is not set
> # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
> CONFIG_INPUT_MISC=y
> CONFIG_INPUT_PCSPKR=m
> # CONFIG_INPUT_ATLAS_BTNS is not set
> # CONFIG_INPUT_ATI_REMOTE is not set
> # CONFIG_INPUT_ATI_REMOTE2 is not set
> # CONFIG_INPUT_KEYSPAN_REMOTE is not set
> # CONFIG_INPUT_POWERMATE is not set
> # CONFIG_INPUT_YEALINK is not set
> CONFIG_INPUT_UINPUT=m
> 
> #
> # Hardware I/O ports
> #
> CONFIG_SERIO=y
> CONFIG_SERIO_I8042=y
> CONFIG_SERIO_SERPORT=y
> # CONFIG_SERIO_CT82C710 is not set
> # CONFIG_SERIO_PARKBD is not set
> # CONFIG_SERIO_PCIPS2 is not set
> CONFIG_SERIO_LIBPS2=y
> # CONFIG_SERIO_RAW is not set
> CONFIG_GAMEPORT=m
> CONFIG_GAMEPORT_NS558=m
> CONFIG_GAMEPORT_L4=m
> CONFIG_GAMEPORT_EMU10K1=m
> CONFIG_GAMEPORT_FM801=m
> 
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_VT_CONSOLE=y
> CONFIG_HW_CONSOLE=y
> # CONFIG_VT_HW_CONSOLE_BINDING is not set
> CONFIG_SERIAL_NONSTANDARD=y
> # CONFIG_COMPUTONE is not set
> # CONFIG_ROCKETPORT is not set
> # CONFIG_CYCLADES is not set
> # CONFIG_DIGIEPCA is not set
> # CONFIG_MOXA_INTELLIO is not set
> # CONFIG_MOXA_SMARTIO is not set
> # CONFIG_MOXA_SMARTIO_NEW is not set
> # CONFIG_ISI is not set
> CONFIG_SYNCLINK=m
> CONFIG_SYNCLINKMP=m
> # CONFIG_SYNCLINK_GT is not set
> CONFIG_N_HDLC=m
> # CONFIG_SPECIALIX is not set
> # CONFIG_SX is not set
> # CONFIG_RIO is not set
> CONFIG_STALDRV=y
> 
> #
> # Serial drivers
> #
> CONFIG_SERIAL_8250=y
> CONFIG_SERIAL_8250_CONSOLE=y
> CONFIG_FIX_EARLYCON_MEM=y
> CONFIG_SERIAL_8250_PCI=y
> CONFIG_SERIAL_8250_PNP=y
> # CONFIG_SERIAL_8250_CS is not set
> CONFIG_SERIAL_8250_NR_UARTS=4
> CONFIG_SERIAL_8250_RUNTIME_UARTS=4
> CONFIG_SERIAL_8250_EXTENDED=y
> # CONFIG_SERIAL_8250_MANY_PORTS is not set
> CONFIG_SERIAL_8250_SHARE_IRQ=y
> CONFIG_SERIAL_8250_DETECT_IRQ=y
> CONFIG_SERIAL_8250_RSA=y
> 
> #
> # Non-8250 serial port support
> #
> CONFIG_SERIAL_CORE=y
> CONFIG_SERIAL_CORE_CONSOLE=y
> # CONFIG_SERIAL_JSM is not set
> CONFIG_UNIX98_PTYS=y
> # CONFIG_LEGACY_PTYS is not set
> CONFIG_PRINTER=m
> CONFIG_LP_CONSOLE=y
> CONFIG_PPDEV=m
> # CONFIG_TIPAR is not set
> # CONFIG_IPMI_HANDLER is not set
> CONFIG_HW_RANDOM=m
> CONFIG_HW_RANDOM_INTEL=m
> CONFIG_HW_RANDOM_AMD=m
> CONFIG_NVRAM=m
> CONFIG_RTC=y
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
> 
> #
> # PCMCIA character devices
> #
> # CONFIG_SYNCLINK_CS is not set
> # CONFIG_CARDMAN_4000 is not set
> # CONFIG_CARDMAN_4040 is not set
> # CONFIG_MWAVE is not set
> # CONFIG_PC8736x_GPIO is not set
> CONFIG_RAW_DRIVER=y
> CONFIG_MAX_RAW_DEVS=8192
> CONFIG_HPET=y
> # CONFIG_HPET_RTC_IRQ is not set
> CONFIG_HPET_MMAP=y
> CONFIG_HANGCHECK_TIMER=m
> # CONFIG_TCG_TPM is not set
> # CONFIG_TELCLOCK is not set
> CONFIG_DEVPORT=y
> CONFIG_I2C=m
> CONFIG_I2C_BOARDINFO=y
> CONFIG_I2C_CHARDEV=m
> 
> #
> # I2C Algorithms
> #
> CONFIG_I2C_ALGOBIT=m
> CONFIG_I2C_ALGOPCF=m
> CONFIG_I2C_ALGOPCA=m
> 
> #
> # I2C Hardware Bus support
> #
> CONFIG_I2C_ALI1535=m
> CONFIG_I2C_ALI1563=m
> CONFIG_I2C_ALI15X3=m
> CONFIG_I2C_AMD756=m
> CONFIG_I2C_AMD756_S4882=m
> CONFIG_I2C_AMD8111=m
> CONFIG_I2C_I801=m
> CONFIG_I2C_I810=m
> CONFIG_I2C_PIIX4=m
> CONFIG_I2C_NFORCE2=m
> # CONFIG_I2C_OCORES is not set
> # CONFIG_I2C_PARPORT is not set
> # CONFIG_I2C_PARPORT_LIGHT is not set
> CONFIG_I2C_PROSAVAGE=m
> CONFIG_I2C_SAVAGE4=m
> # CONFIG_I2C_SIMTEC is not set
> CONFIG_I2C_SIS5595=m
> CONFIG_I2C_SIS630=m
> CONFIG_I2C_SIS96X=m
> # CONFIG_I2C_TAOS_EVM is not set
> CONFIG_I2C_STUB=m
> # CONFIG_I2C_TINY_USB is not set
> CONFIG_I2C_VIA=m
> CONFIG_I2C_VIAPRO=m
> CONFIG_I2C_VOODOO3=m
> 
> #
> # Miscellaneous I2C Chip support
> #
> CONFIG_SENSORS_DS1337=m
> CONFIG_SENSORS_DS1374=m
> # CONFIG_DS1682 is not set
> CONFIG_SENSORS_EEPROM=m
> CONFIG_SENSORS_PCF8574=m
> CONFIG_SENSORS_PCA9539=m
> CONFIG_SENSORS_PCF8591=m
> CONFIG_SENSORS_MAX6875=m
> # CONFIG_SENSORS_TSL2550 is not set
> # CONFIG_I2C_DEBUG_CORE is not set
> # CONFIG_I2C_DEBUG_ALGO is not set
> # CONFIG_I2C_DEBUG_BUS is not set
> # CONFIG_I2C_DEBUG_CHIP is not set
> 
> #
> # SPI support
> #
> # CONFIG_SPI is not set
> # CONFIG_SPI_MASTER is not set
> # CONFIG_W1 is not set
> CONFIG_POWER_SUPPLY=y
> # CONFIG_POWER_SUPPLY_DEBUG is not set
> # CONFIG_PDA_POWER is not set
> # CONFIG_BATTERY_DS2760 is not set
> CONFIG_HWMON=y
> CONFIG_HWMON_VID=m
> # CONFIG_SENSORS_ABITUGURU is not set
> # CONFIG_SENSORS_ABITUGURU3 is not set
> # CONFIG_SENSORS_AD7418 is not set
> CONFIG_SENSORS_ADM1021=m
> CONFIG_SENSORS_ADM1025=m
> CONFIG_SENSORS_ADM1026=m
> # CONFIG_SENSORS_ADM1029 is not set
> CONFIG_SENSORS_ADM1031=m
> CONFIG_SENSORS_ADM9240=m
> # CONFIG_SENSORS_ADT7470 is not set
> # CONFIG_SENSORS_K8TEMP is not set
> CONFIG_SENSORS_ASB100=m
> CONFIG_SENSORS_ATXP1=m
> CONFIG_SENSORS_DS1621=m
> # CONFIG_SENSORS_I5K_AMB is not set
> # CONFIG_SENSORS_F71805F is not set
> # CONFIG_SENSORS_F71882FG is not set
> # CONFIG_SENSORS_F75375S is not set
> CONFIG_SENSORS_FSCHER=m
> CONFIG_SENSORS_FSCPOS=m
> # CONFIG_SENSORS_FSCHMD is not set
> CONFIG_SENSORS_GL518SM=m
> CONFIG_SENSORS_GL520SM=m
> # CONFIG_SENSORS_CORETEMP is not set
> CONFIG_SENSORS_IT87=m
> CONFIG_SENSORS_LM63=m
> CONFIG_SENSORS_LM75=m
> CONFIG_SENSORS_LM77=m
> CONFIG_SENSORS_LM78=m
> CONFIG_SENSORS_LM80=m
> CONFIG_SENSORS_LM83=m
> CONFIG_SENSORS_LM85=m
> CONFIG_SENSORS_LM87=m
> CONFIG_SENSORS_LM90=m
> CONFIG_SENSORS_LM92=m
> # CONFIG_SENSORS_LM93 is not set
> CONFIG_SENSORS_MAX1619=m
> # CONFIG_SENSORS_MAX6650 is not set
> CONFIG_SENSORS_PC87360=m
> # CONFIG_SENSORS_PC87427 is not set
> CONFIG_SENSORS_SIS5595=m
> # CONFIG_SENSORS_DME1737 is not set
> CONFIG_SENSORS_SMSC47M1=m
> # CONFIG_SENSORS_SMSC47M192 is not set
> CONFIG_SENSORS_SMSC47B397=m
> # CONFIG_SENSORS_THMC50 is not set
> CONFIG_SENSORS_VIA686A=m
> # CONFIG_SENSORS_VT1211 is not set
> # CONFIG_SENSORS_VT8231 is not set
> CONFIG_SENSORS_W83781D=m
> # CONFIG_SENSORS_W83791D is not set
> CONFIG_SENSORS_W83792D=m
> # CONFIG_SENSORS_W83793 is not set
> CONFIG_SENSORS_W83L785TS=m
> CONFIG_SENSORS_W83627HF=m
> CONFIG_SENSORS_W83627EHF=m
> # CONFIG_SENSORS_HDAPS is not set
> # CONFIG_SENSORS_APPLESMC is not set
> # CONFIG_HWMON_DEBUG_CHIP is not set
> CONFIG_WATCHDOG=y
> # CONFIG_WATCHDOG_NOWAYOUT is not set
> 
> #
> # Watchdog Device Drivers
> #
> # CONFIG_SOFT_WATCHDOG is not set
> CONFIG_ACQUIRE_WDT=m
> CONFIG_ADVANTECH_WDT=m
> CONFIG_ALIM1535_WDT=m
> CONFIG_ALIM7101_WDT=m
> CONFIG_SC520_WDT=m
> CONFIG_EUROTECH_WDT=m
> CONFIG_IB700_WDT=m
> CONFIG_IBMASR=m
> CONFIG_WAFER_WDT=m
> CONFIG_I6300ESB_WDT=m
> # CONFIG_ITCO_WDT is not set
> CONFIG_SC1200_WDT=m
> # CONFIG_PC87413_WDT is not set
> # CONFIG_60XX_WDT is not set
> CONFIG_SBC8360_WDT=m
> CONFIG_CPU5_WDT=m
> # CONFIG_SMSC37B787_WDT is not set
> CONFIG_W83627HF_WDT=m
> # CONFIG_W83697HF_WDT is not set
> CONFIG_W83877F_WDT=m
> CONFIG_W83977F_WDT=m
> CONFIG_MACHZ_WDT=m
> # CONFIG_SBC_EPX_C3_WATCHDOG is not set
> 
> #
> # PCI-based Watchdog Cards
> #
> CONFIG_PCIPCWATCHDOG=m
> CONFIG_WDTPCI=m
> CONFIG_WDT_501_PCI=y
> 
> #
> # USB-based Watchdog Cards
> #
> CONFIG_USBPCWATCHDOG=m
> 
> #
> # Sonics Silicon Backplane
> #
> CONFIG_SSB_POSSIBLE=y
> CONFIG_SSB=m
> CONFIG_SSB_PCIHOST_POSSIBLE=y
> CONFIG_SSB_PCIHOST=y
> CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
> # CONFIG_SSB_PCMCIAHOST is not set
> # CONFIG_SSB_DEBUG is not set
> CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
> CONFIG_SSB_DRIVER_PCICORE=y
> 
> #
> # Multifunction device drivers
> #
> # CONFIG_MFD_SM501 is not set
> 
> #
> # Multimedia devices
> #
> CONFIG_VIDEO_DEV=m
> CONFIG_VIDEO_V4L1=y
> CONFIG_VIDEO_V4L1_COMPAT=y
> CONFIG_VIDEO_V4L2=y
> CONFIG_VIDEO_CAPTURE_DRIVERS=y
> # CONFIG_VIDEO_ADV_DEBUG is not set
> CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
> # CONFIG_VIDEO_VIVI is not set
> # CONFIG_VIDEO_BT848 is not set
> # CONFIG_VIDEO_BWQCAM is not set
> # CONFIG_VIDEO_CQCAM is not set
> # CONFIG_VIDEO_W9966 is not set
> # CONFIG_VIDEO_CPIA is not set
> # CONFIG_VIDEO_CPIA2 is not set
> # CONFIG_VIDEO_SAA5246A is not set
> # CONFIG_VIDEO_SAA5249 is not set
> # CONFIG_TUNER_3036 is not set
> # CONFIG_VIDEO_STRADIS is not set
> # CONFIG_VIDEO_ZORAN is not set
> # CONFIG_VIDEO_SAA7134 is not set
> # CONFIG_VIDEO_MXB is not set
> # CONFIG_VIDEO_DPC is not set
> # CONFIG_VIDEO_HEXIUM_ORION is not set
> # CONFIG_VIDEO_HEXIUM_GEMINI is not set
> # CONFIG_VIDEO_CX88 is not set
> # CONFIG_VIDEO_IVTV is not set
> # CONFIG_VIDEO_CAFE_CCIC is not set
> CONFIG_V4L_USB_DRIVERS=y
> # CONFIG_VIDEO_PVRUSB2 is not set
> # CONFIG_VIDEO_EM28XX is not set
> # CONFIG_VIDEO_USBVISION is not set
> CONFIG_VIDEO_USBVIDEO=m
> CONFIG_USB_VICAM=m
> CONFIG_USB_IBMCAM=m
> CONFIG_USB_KONICAWC=m
> # CONFIG_USB_QUICKCAM_MESSENGER is not set
> # CONFIG_USB_ET61X251 is not set
> CONFIG_VIDEO_OVCAMCHIP=m
> CONFIG_USB_W9968CF=m
> CONFIG_USB_OV511=m
> CONFIG_USB_SE401=m
> CONFIG_USB_SN9C102=m
> CONFIG_USB_STV680=m
> # CONFIG_USB_ZC0301 is not set
> CONFIG_USB_PWC=m
> # CONFIG_USB_PWC_DEBUG is not set
> # CONFIG_USB_ZR364XX is not set
> CONFIG_RADIO_ADAPTERS=y
> # CONFIG_RADIO_GEMTEK_PCI is not set
> # CONFIG_RADIO_MAXIRADIO is not set
> # CONFIG_RADIO_MAESTRO is not set
> CONFIG_USB_DSBR=m
> # CONFIG_DVB_CORE is not set
> CONFIG_DAB=y
> CONFIG_USB_DABUSB=m
> 
> #
> # Graphics support
> #
> CONFIG_AGP=y
> CONFIG_AGP_AMD64=y
> CONFIG_AGP_INTEL=y
> CONFIG_AGP_SIS=y
> CONFIG_AGP_VIA=y
> CONFIG_DRM=y
> # CONFIG_DRM_TDFX is not set
> CONFIG_DRM_R128=m
> CONFIG_DRM_RADEON=y
> CONFIG_DRM_I810=y
> # CONFIG_DRM_I830 is not set
> CONFIG_DRM_I915=y
> CONFIG_DRM_MGA=m
> # CONFIG_DRM_SIS is not set
> CONFIG_DRM_VIA=m
> CONFIG_DRM_SAVAGE=m
> CONFIG_VGASTATE=m
> CONFIG_VIDEO_OUTPUT_CONTROL=m
> CONFIG_FB=y
> CONFIG_FIRMWARE_EDID=y
> CONFIG_FB_DDC=m
> CONFIG_FB_CFB_FILLRECT=y
> CONFIG_FB_CFB_COPYAREA=y
> CONFIG_FB_CFB_IMAGEBLIT=y
> # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
> CONFIG_FB_SYS_FILLRECT=m
> CONFIG_FB_SYS_COPYAREA=m
> CONFIG_FB_SYS_IMAGEBLIT=m
> CONFIG_FB_SYS_FOPS=m
> CONFIG_FB_DEFERRED_IO=y
> # CONFIG_FB_SVGALIB is not set
> # CONFIG_FB_MACMODES is not set
> CONFIG_FB_BACKLIGHT=y
> CONFIG_FB_MODE_HELPERS=y
> # CONFIG_FB_TILEBLITTING is not set
> 
> #
> # Frame buffer hardware drivers
> #
> CONFIG_FB_CIRRUS=m
> # CONFIG_FB_PM2 is not set
> # CONFIG_FB_CYBER2000 is not set
> CONFIG_FB_ARC=m
> # CONFIG_FB_ASILIANT is not set
> # CONFIG_FB_IMSTT is not set
> CONFIG_FB_VGA16=m
> CONFIG_FB_VESA=y
> # CONFIG_FB_HECUBA is not set
> # CONFIG_FB_HGA is not set
> CONFIG_FB_S1D13XXX=m
> CONFIG_FB_NVIDIA=m
> CONFIG_FB_NVIDIA_I2C=y
> # CONFIG_FB_NVIDIA_DEBUG is not set
> CONFIG_FB_NVIDIA_BACKLIGHT=y
> CONFIG_FB_RIVA=m
> # CONFIG_FB_RIVA_I2C is not set
> # CONFIG_FB_RIVA_DEBUG is not set
> CONFIG_FB_RIVA_BACKLIGHT=y
> # CONFIG_FB_LE80578 is not set
> CONFIG_FB_INTEL=m
> # CONFIG_FB_INTEL_DEBUG is not set
> CONFIG_FB_INTEL_I2C=y
> # CONFIG_FB_MATROX is not set
> # CONFIG_FB_RADEON is not set
> # CONFIG_FB_ATY128 is not set
> # CONFIG_FB_ATY is not set
> # CONFIG_FB_S3 is not set
> CONFIG_FB_SAVAGE=m
> CONFIG_FB_SAVAGE_I2C=y
> CONFIG_FB_SAVAGE_ACCEL=y
> # CONFIG_FB_SIS is not set
> # CONFIG_FB_NEOMAGIC is not set
> CONFIG_FB_KYRO=m
> # CONFIG_FB_3DFX is not set
> # CONFIG_FB_VOODOO1 is not set
> # CONFIG_FB_VT8623 is not set
> # CONFIG_FB_TRIDENT is not set
> # CONFIG_FB_ARK is not set
> # CONFIG_FB_PM3 is not set
> # CONFIG_FB_GEODE is not set
> # CONFIG_FB_VIRTUAL is not set
> CONFIG_BACKLIGHT_LCD_SUPPORT=y
> CONFIG_LCD_CLASS_DEVICE=m
> CONFIG_BACKLIGHT_CLASS_DEVICE=y
> # CONFIG_BACKLIGHT_CORGI is not set
> # CONFIG_BACKLIGHT_PROGEAR is not set
> 
> #
> # Display device support
> #
> # CONFIG_DISPLAY_SUPPORT is not set
> 
> #
> # Console display driver support
> #
> CONFIG_VGA_CONSOLE=y
> # CONFIG_VGACON_SOFT_SCROLLBACK is not set
> CONFIG_VIDEO_SELECT=y
> CONFIG_DUMMY_CONSOLE=y
> CONFIG_FRAMEBUFFER_CONSOLE=y
> # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
> # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
> # CONFIG_FONTS is not set
> CONFIG_FONT_8x8=y
> CONFIG_FONT_8x16=y
> CONFIG_LOGO=y
> # CONFIG_LOGO_LINUX_MONO is not set
> # CONFIG_LOGO_LINUX_VGA16 is not set
> CONFIG_LOGO_LINUX_CLUT224=y
> 
> #
> # Sound
> #
> CONFIG_SOUND=y
> 
> #
> # Advanced Linux Sound Architecture
> #
> CONFIG_SND=y
> CONFIG_SND_TIMER=y
> CONFIG_SND_PCM=y
> CONFIG_SND_HWDEP=y
> CONFIG_SND_RAWMIDI=y
> CONFIG_SND_SEQUENCER=y
> CONFIG_SND_SEQ_DUMMY=y
> CONFIG_SND_OSSEMUL=y
> CONFIG_SND_MIXER_OSS=y
> CONFIG_SND_PCM_OSS=y
> CONFIG_SND_PCM_OSS_PLUGINS=y
> CONFIG_SND_SEQUENCER_OSS=y
> CONFIG_SND_RTCTIMER=y
> CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
> # CONFIG_SND_DYNAMIC_MINORS is not set
> CONFIG_SND_SUPPORT_OLD_API=y
> CONFIG_SND_VERBOSE_PROCFS=y
> # CONFIG_SND_VERBOSE_PRINTK is not set
> # CONFIG_SND_DEBUG is not set
> 
> #
> # Generic devices
> #
> CONFIG_SND_MPU401_UART=y
> CONFIG_SND_OPL3_LIB=m
> CONFIG_SND_VX_LIB=m
> CONFIG_SND_AC97_CODEC=y
> CONFIG_SND_DUMMY=m
> # CONFIG_SND_VIRMIDI is not set
> # CONFIG_SND_MTPAV is not set
> # CONFIG_SND_MTS64 is not set
> # CONFIG_SND_SERIAL_U16550 is not set
> CONFIG_SND_MPU401=y
> # CONFIG_SND_PORTMAN2X4 is not set
> CONFIG_SND_SB_COMMON=m
> 
> #
> # PCI devices
> #
> CONFIG_SND_AD1889=m
> # CONFIG_SND_ALS300 is not set
> CONFIG_SND_ALS4000=m
> CONFIG_SND_ALI5451=m
> CONFIG_SND_ATIIXP=m
> CONFIG_SND_ATIIXP_MODEM=m
> CONFIG_SND_AU8810=m
> CONFIG_SND_AU8820=m
> CONFIG_SND_AU8830=m
> CONFIG_SND_AZT3328=m
> CONFIG_SND_BT87X=m
> # CONFIG_SND_BT87X_OVERCLOCK is not set
> CONFIG_SND_CA0106=m
> CONFIG_SND_CMIPCI=m
> CONFIG_SND_CS4281=m
> CONFIG_SND_CS46XX=m
> CONFIG_SND_CS46XX_NEW_DSP=y
> # CONFIG_SND_CS5530 is not set
> # CONFIG_SND_DARLA20 is not set
> # CONFIG_SND_GINA20 is not set
> # CONFIG_SND_LAYLA20 is not set
> # CONFIG_SND_DARLA24 is not set
> # CONFIG_SND_GINA24 is not set
> # CONFIG_SND_LAYLA24 is not set
> # CONFIG_SND_MONA is not set
> # CONFIG_SND_MIA is not set
> # CONFIG_SND_ECHO3G is not set
> # CONFIG_SND_INDIGO is not set
> # CONFIG_SND_INDIGOIO is not set
> # CONFIG_SND_INDIGODJ is not set
> CONFIG_SND_EMU10K1=y
> CONFIG_SND_EMU10K1X=y
> CONFIG_SND_ENS1370=m
> CONFIG_SND_ENS1371=m
> CONFIG_SND_ES1938=m
> CONFIG_SND_ES1968=m
> CONFIG_SND_FM801=m
> # CONFIG_SND_FM801_TEA575X_BOOL is not set
> CONFIG_SND_HDA_INTEL=y
> # CONFIG_SND_HDA_HWDEP is not set
> CONFIG_SND_HDA_CODEC_REALTEK=y
> CONFIG_SND_HDA_CODEC_ANALOG=y
> CONFIG_SND_HDA_CODEC_SIGMATEL=y
> CONFIG_SND_HDA_CODEC_VIA=y
> CONFIG_SND_HDA_CODEC_ATIHDMI=y
> CONFIG_SND_HDA_CODEC_CONEXANT=y
> CONFIG_SND_HDA_CODEC_CMEDIA=y
> CONFIG_SND_HDA_CODEC_SI3054=y
> CONFIG_SND_HDA_GENERIC=y
> # CONFIG_SND_HDA_POWER_SAVE is not set
> CONFIG_SND_HDSP=m
> CONFIG_SND_HDSPM=m
> CONFIG_SND_ICE1712=m
> CONFIG_SND_ICE1724=m
> CONFIG_SND_INTEL8X0=y
> # CONFIG_SND_INTEL8X0M is not set
> CONFIG_SND_KORG1212=m
> CONFIG_SND_KORG1212_FIRMWARE_IN_KERNEL=y
> CONFIG_SND_MAESTRO3=m
> CONFIG_SND_MAESTRO3_FIRMWARE_IN_KERNEL=y
> # CONFIG_SND_MIXART is not set
> CONFIG_SND_NM256=m
> # CONFIG_SND_PCXHR is not set
> # CONFIG_SND_RIPTIDE is not set
> CONFIG_SND_RME32=m
> CONFIG_SND_RME96=m
> CONFIG_SND_RME9652=m
> CONFIG_SND_SONICVIBES=m
> CONFIG_SND_TRIDENT=m
> CONFIG_SND_VIA82XX=m
> CONFIG_SND_VIA82XX_MODEM=m
> CONFIG_SND_VX222=m
> CONFIG_SND_YMFPCI=m
> CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y
> CONFIG_SND_AC97_POWER_SAVE=y
> CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
> 
> #
> # USB devices
> #
> CONFIG_SND_USB_AUDIO=m
> CONFIG_SND_USB_USX2Y=m
> # CONFIG_SND_USB_CAIAQ is not set
> 
> #
> # PCMCIA devices
> #
> # CONFIG_SND_VXPOCKET is not set
> # CONFIG_SND_PDAUDIOCF is not set
> 
> #
> # System on Chip audio support
> #
> # CONFIG_SND_SOC is not set
> 
> #
> # SoC Audio support for SuperH
> #
> 
> #
> # Open Sound System
> #
> # CONFIG_SOUND_PRIME is not set
> CONFIG_AC97_BUS=y
> CONFIG_HID_SUPPORT=y
> CONFIG_HID=y
> CONFIG_HID_DEBUG=y
> # CONFIG_HIDRAW is not set
> 
> #
> # USB Input Devices
> #
> CONFIG_USB_HID=y
> # CONFIG_USB_HIDINPUT_POWERBOOK is not set
> CONFIG_HID_FF=y
> CONFIG_HID_PID=y
> CONFIG_LOGITECH_FF=y
> # CONFIG_PANTHERLORD_FF is not set
> CONFIG_THRUSTMASTER_FF=y
> # CONFIG_ZEROPLUS_FF is not set
> CONFIG_USB_HIDDEV=y
> CONFIG_USB_SUPPORT=y
> CONFIG_USB_ARCH_HAS_HCD=y
> CONFIG_USB_ARCH_HAS_OHCI=y
> CONFIG_USB_ARCH_HAS_EHCI=y
> CONFIG_USB=y
> # CONFIG_USB_DEBUG is not set
> 
> #
> # Miscellaneous USB options
> #
> CONFIG_USB_DEVICEFS=y
> CONFIG_USB_DEVICE_CLASS=y
> # CONFIG_USB_DYNAMIC_MINORS is not set
> CONFIG_USB_SUSPEND=y
> # CONFIG_USB_PERSIST is not set
> # CONFIG_USB_OTG is not set
> 
> #
> # USB Host Controller Drivers
> #
> CONFIG_USB_EHCI_HCD=y
> CONFIG_USB_EHCI_SPLIT_ISO=y
> CONFIG_USB_EHCI_ROOT_HUB_TT=y
> CONFIG_USB_EHCI_TT_NEWSCHED=y
> # CONFIG_USB_ISP116X_HCD is not set
> CONFIG_USB_OHCI_HCD=y
> # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
> # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
> CONFIG_USB_OHCI_LITTLE_ENDIAN=y
> CONFIG_USB_UHCI_HCD=y
> # CONFIG_USB_SL811_HCD is not set
> # CONFIG_USB_R8A66597_HCD is not set
> 
> #
> # USB Device Class drivers
> #
> CONFIG_USB_ACM=m
> CONFIG_USB_PRINTER=m
> 
> #
> # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
> #
> 
> #
> # may also be needed; see USB_STORAGE Help for more information
> #
> CONFIG_USB_STORAGE=m
> # CONFIG_USB_STORAGE_DEBUG is not set
> CONFIG_USB_STORAGE_DATAFAB=y
> CONFIG_USB_STORAGE_FREECOM=y
> # CONFIG_USB_STORAGE_ISD200 is not set
> CONFIG_USB_STORAGE_DPCM=y
> CONFIG_USB_STORAGE_USBAT=y
> CONFIG_USB_STORAGE_SDDR09=y
> CONFIG_USB_STORAGE_SDDR55=y
> CONFIG_USB_STORAGE_JUMPSHOT=y
> # CONFIG_USB_STORAGE_ALAUDA is not set
> # CONFIG_USB_STORAGE_KARMA is not set
> # CONFIG_USB_LIBUSUAL is not set
> 
> #
> # USB Imaging devices
> #
> CONFIG_USB_MDC800=m
> CONFIG_USB_MICROTEK=m
> CONFIG_USB_MON=y
> 
> #
> # USB port drivers
> #
> CONFIG_USB_USS720=m
> 
> #
> # USB Serial Converter support
> #
> CONFIG_USB_SERIAL=m
> CONFIG_USB_SERIAL_GENERIC=y
> # CONFIG_USB_SERIAL_AIRCABLE is not set
> CONFIG_USB_SERIAL_AIRPRIME=m
> # CONFIG_USB_SERIAL_ARK3116 is not set
> CONFIG_USB_SERIAL_BELKIN=m
> # CONFIG_USB_SERIAL_CH341 is not set
> # CONFIG_USB_SERIAL_WHITEHEAT is not set
> CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
> CONFIG_USB_SERIAL_CP2101=m
> CONFIG_USB_SERIAL_CYPRESS_M8=m
> CONFIG_USB_SERIAL_EMPEG=m
> CONFIG_USB_SERIAL_FTDI_SIO=m
> # CONFIG_USB_SERIAL_FUNSOFT is not set
> CONFIG_USB_SERIAL_VISOR=m
> CONFIG_USB_SERIAL_IPAQ=m
> CONFIG_USB_SERIAL_IR=m
> CONFIG_USB_SERIAL_EDGEPORT=m
> CONFIG_USB_SERIAL_EDGEPORT_TI=m
> CONFIG_USB_SERIAL_GARMIN=m
> CONFIG_USB_SERIAL_IPW=m
> CONFIG_USB_SERIAL_KEYSPAN_PDA=m
> CONFIG_USB_SERIAL_KEYSPAN=m
> CONFIG_USB_SERIAL_KEYSPAN_MPR=y
> CONFIG_USB_SERIAL_KEYSPAN_USA28=y
> CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
> CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
> CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
> CONFIG_USB_SERIAL_KEYSPAN_USA19=y
> CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
> CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
> CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
> CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
> CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
> CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
> CONFIG_USB_SERIAL_KLSI=m
> CONFIG_USB_SERIAL_KOBIL_SCT=m
> CONFIG_USB_SERIAL_MCT_U232=m
> # CONFIG_USB_SERIAL_MOS7720 is not set
> # CONFIG_USB_SERIAL_MOS7840 is not set
> # CONFIG_USB_SERIAL_NAVMAN is not set
> CONFIG_USB_SERIAL_PL2303=m
> # CONFIG_USB_SERIAL_OTI6858 is not set
> CONFIG_USB_SERIAL_HP4X=m
> CONFIG_USB_SERIAL_SAFE=m
> CONFIG_USB_SERIAL_SAFE_PADDED=y
> # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
> CONFIG_USB_SERIAL_TI=m
> CONFIG_USB_SERIAL_CYBERJACK=m
> CONFIG_USB_SERIAL_XIRCOM=m
> # CONFIG_USB_SERIAL_OPTION is not set
> CONFIG_USB_SERIAL_OMNINET=m
> # CONFIG_USB_SERIAL_DEBUG is not set
> CONFIG_USB_EZUSB=y
> 
> #
> # USB Miscellaneous drivers
> #
> CONFIG_USB_EMI62=m
> # CONFIG_USB_EMI26 is not set
> # CONFIG_USB_ADUTUX is not set
> CONFIG_USB_AUERSWALD=m
> CONFIG_USB_RIO500=m
> CONFIG_USB_LEGOTOWER=m
> CONFIG_USB_LCD=m
> # CONFIG_USB_BERRY_CHARGE is not set
> CONFIG_USB_LED=m
> # CONFIG_USB_CYPRESS_CY7C63 is not set
> # CONFIG_USB_CYTHERM is not set
> # CONFIG_USB_PHIDGET is not set
> # CONFIG_USB_IDMOUSE is not set
> # CONFIG_USB_FTDI_ELAN is not set
> # CONFIG_USB_APPLEDISPLAY is not set
> # CONFIG_USB_SISUSBVGA is not set
> # CONFIG_USB_LD is not set
> # CONFIG_USB_TRANCEVIBRATOR is not set
> # CONFIG_USB_IOWARRIOR is not set
> CONFIG_USB_TEST=m
> 
> #
> # USB DSL modem support
> #
> CONFIG_USB_ATM=m
> CONFIG_USB_SPEEDTOUCH=m
> CONFIG_USB_CXACRU=m
> # CONFIG_USB_UEAGLEATM is not set
> CONFIG_USB_XUSBATM=m
> 
> #
> # USB Gadget Support
> #
> # CONFIG_USB_GADGET is not set
> # CONFIG_MMC is not set
> # CONFIG_NEW_LEDS is not set
> # CONFIG_INFINIBAND is not set
> # CONFIG_EDAC is not set
> # CONFIG_RTC_CLASS is not set
> # CONFIG_DMADEVICES is not set
> # CONFIG_AUXDISPLAY is not set
> CONFIG_VIRTUALIZATION=y
> # CONFIG_KVM is not set
> 
> #
> # Userspace I/O
> #
> # CONFIG_UIO is not set
> 
> #
> # Firmware Drivers
> #
> # CONFIG_EDD is not set
> # CONFIG_DELL_RBU is not set
> # CONFIG_DCDBAS is not set
> CONFIG_DMIID=y
> 
> #
> # File systems
> #
> CONFIG_EXT2_FS=y
> CONFIG_EXT2_FS_XATTR=y
> CONFIG_EXT2_FS_POSIX_ACL=y
> CONFIG_EXT2_FS_SECURITY=y
> # CONFIG_EXT2_FS_XIP is not set
> CONFIG_EXT3_FS=y
> CONFIG_EXT3_FS_XATTR=y
> CONFIG_EXT3_FS_POSIX_ACL=y
> CONFIG_EXT3_FS_SECURITY=y
> # CONFIG_EXT4DEV_FS is not set
> CONFIG_JBD=y
> # CONFIG_JBD_DEBUG is not set
> CONFIG_FS_MBCACHE=y
> CONFIG_REISERFS_FS=y
> # CONFIG_REISERFS_CHECK is not set
> CONFIG_REISERFS_PROC_INFO=y
> CONFIG_REISERFS_FS_XATTR=y
> CONFIG_REISERFS_FS_POSIX_ACL=y
> CONFIG_REISERFS_FS_SECURITY=y
> # CONFIG_JFS_FS is not set
> CONFIG_FS_POSIX_ACL=y
> CONFIG_XFS_FS=y
> CONFIG_XFS_QUOTA=y
> CONFIG_XFS_SECURITY=y
> CONFIG_XFS_POSIX_ACL=y
> CONFIG_XFS_RT=y
> # CONFIG_GFS2_FS is not set
> # CONFIG_OCFS2_FS is not set
> # CONFIG_MINIX_FS is not set
> # CONFIG_ROMFS_FS is not set
> CONFIG_INOTIFY=y
> CONFIG_INOTIFY_USER=y
> CONFIG_QUOTA=y
> # CONFIG_QUOTA_NETLINK_INTERFACE is not set
> CONFIG_PRINT_QUOTA_WARNING=y
> # CONFIG_QFMT_V1 is not set
> CONFIG_QFMT_V2=y
> CONFIG_QUOTACTL=y
> CONFIG_DNOTIFY=y
> # CONFIG_AUTOFS_FS is not set
> CONFIG_AUTOFS4_FS=m
> # CONFIG_FUSE_FS is not set
> 
> #
> # CD-ROM/DVD Filesystems
> #
> CONFIG_ISO9660_FS=y
> CONFIG_JOLIET=y
> CONFIG_ZISOFS=y
> CONFIG_UDF_FS=y
> CONFIG_UDF_NLS=y
> 
> #
> # DOS/FAT/NT Filesystems
> #
> CONFIG_FAT_FS=m
> CONFIG_MSDOS_FS=m
> CONFIG_VFAT_FS=m
> CONFIG_FAT_DEFAULT_CODEPAGE=437
> CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
> # CONFIG_NTFS_FS is not set
> 
> #
> # Pseudo filesystems
> #
> CONFIG_PROC_FS=y
> CONFIG_PROC_KCORE=y
> CONFIG_PROC_SYSCTL=y
> CONFIG_SYSFS=y
> CONFIG_TMPFS=y
> # CONFIG_TMPFS_POSIX_ACL is not set
> CONFIG_HUGETLBFS=y
> CONFIG_HUGETLB_PAGE=y
> # CONFIG_CONFIGFS_FS is not set
> 
> #
> # Miscellaneous filesystems
> #
> # CONFIG_ADFS_FS is not set
> # CONFIG_AFFS_FS is not set
> # CONFIG_ECRYPT_FS is not set
> CONFIG_HFS_FS=m
> CONFIG_HFSPLUS_FS=m
> # CONFIG_BEFS_FS is not set
> # CONFIG_BFS_FS is not set
> # CONFIG_EFS_FS is not set
> CONFIG_JFFS2_FS=m
> CONFIG_JFFS2_FS_DEBUG=0
> CONFIG_JFFS2_FS_WRITEBUFFER=y
> # CONFIG_JFFS2_FS_WBUF_VERIFY is not set
> # CONFIG_JFFS2_SUMMARY is not set
> # CONFIG_JFFS2_FS_XATTR is not set
> # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
> CONFIG_JFFS2_ZLIB=y
> # CONFIG_JFFS2_LZO is not set
> CONFIG_JFFS2_RTIME=y
> # CONFIG_JFFS2_RUBIN is not set
> CONFIG_CRAMFS=m
> CONFIG_VXFS_FS=m
> # CONFIG_HPFS_FS is not set
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_SYSV_FS is not set
> # CONFIG_UFS_FS is not set
> CONFIG_NETWORK_FILESYSTEMS=y
> CONFIG_NFS_FS=m
> CONFIG_NFS_V3=y
> # CONFIG_NFS_V3_ACL is not set
> CONFIG_NFS_V4=y
> CONFIG_NFS_DIRECTIO=y
> CONFIG_NFSD=m
> CONFIG_NFSD_V3=y
> # CONFIG_NFSD_V3_ACL is not set
> CONFIG_NFSD_V4=y
> CONFIG_NFSD_TCP=y
> CONFIG_LOCKD=m
> CONFIG_LOCKD_V4=y
> CONFIG_EXPORTFS=m
> CONFIG_NFS_COMMON=y
> CONFIG_SUNRPC=m
> CONFIG_SUNRPC_GSS=m
> # CONFIG_SUNRPC_BIND34 is not set
> CONFIG_RPCSEC_GSS_KRB5=m
> CONFIG_RPCSEC_GSS_SPKM3=m
> CONFIG_SMB_FS=m
> # CONFIG_SMB_NLS_DEFAULT is not set
> CONFIG_CIFS=m
> # CONFIG_CIFS_STATS is not set
> # CONFIG_CIFS_WEAK_PW_HASH is not set
> CONFIG_CIFS_XATTR=y
> CONFIG_CIFS_POSIX=y
> # CONFIG_CIFS_DEBUG2 is not set
> # CONFIG_CIFS_EXPERIMENTAL is not set
> # CONFIG_NCP_FS is not set
> # CONFIG_CODA_FS is not set
> # CONFIG_AFS_FS is not set
> 
> #
> # Partition Types
> #
> CONFIG_PARTITION_ADVANCED=y
> # CONFIG_ACORN_PARTITION is not set
> CONFIG_OSF_PARTITION=y
> # CONFIG_AMIGA_PARTITION is not set
> # CONFIG_ATARI_PARTITION is not set
> CONFIG_MAC_PARTITION=y
> CONFIG_MSDOS_PARTITION=y
> CONFIG_BSD_DISKLABEL=y
> CONFIG_MINIX_SUBPARTITION=y
> CONFIG_SOLARIS_X86_PARTITION=y
> CONFIG_UNIXWARE_DISKLABEL=y
> # CONFIG_LDM_PARTITION is not set
> CONFIG_SGI_PARTITION=y
> # CONFIG_ULTRIX_PARTITION is not set
> CONFIG_SUN_PARTITION=y
> # CONFIG_KARMA_PARTITION is not set
> CONFIG_EFI_PARTITION=y
> # CONFIG_SYSV68_PARTITION is not set
> CONFIG_NLS=y
> CONFIG_NLS_DEFAULT="utf8"
> CONFIG_NLS_CODEPAGE_437=y
> CONFIG_NLS_CODEPAGE_737=m
> CONFIG_NLS_CODEPAGE_775=m
> CONFIG_NLS_CODEPAGE_850=m
> CONFIG_NLS_CODEPAGE_852=m
> CONFIG_NLS_CODEPAGE_855=m
> CONFIG_NLS_CODEPAGE_857=m
> CONFIG_NLS_CODEPAGE_860=m
> CONFIG_NLS_CODEPAGE_861=m
> CONFIG_NLS_CODEPAGE_862=m
> CONFIG_NLS_CODEPAGE_863=m
> CONFIG_NLS_CODEPAGE_864=m
> CONFIG_NLS_CODEPAGE_865=m
> CONFIG_NLS_CODEPAGE_866=m
> CONFIG_NLS_CODEPAGE_869=m
> CONFIG_NLS_CODEPAGE_936=m
> CONFIG_NLS_CODEPAGE_950=m
> CONFIG_NLS_CODEPAGE_932=m
> CONFIG_NLS_CODEPAGE_949=m
> CONFIG_NLS_CODEPAGE_874=m
> CONFIG_NLS_ISO8859_8=m
> CONFIG_NLS_CODEPAGE_1250=m
> CONFIG_NLS_CODEPAGE_1251=m
> CONFIG_NLS_ASCII=y
> CONFIG_NLS_ISO8859_1=m
> CONFIG_NLS_ISO8859_2=m
> CONFIG_NLS_ISO8859_3=m
> CONFIG_NLS_ISO8859_4=m
> CONFIG_NLS_ISO8859_5=m
> CONFIG_NLS_ISO8859_6=m
> CONFIG_NLS_ISO8859_7=m
> CONFIG_NLS_ISO8859_9=m
> CONFIG_NLS_ISO8859_13=m
> CONFIG_NLS_ISO8859_14=m
> CONFIG_NLS_ISO8859_15=m
> CONFIG_NLS_KOI8_R=m
> CONFIG_NLS_KOI8_U=m
> CONFIG_NLS_UTF8=m
> # CONFIG_DLM is not set
> CONFIG_INSTRUMENTATION=y
> CONFIG_PROFILING=y
> CONFIG_OPROFILE=m
> CONFIG_KPROBES=y
> # CONFIG_MARKERS is not set
> 
> #
> # Kernel hacking
> #
> CONFIG_TRACE_IRQFLAGS_SUPPORT=y
> # CONFIG_PRINTK_TIME is not set
> CONFIG_ENABLE_WARN_DEPRECATED=y
> # CONFIG_ENABLE_MUST_CHECK is not set
> CONFIG_MAGIC_SYSRQ=y
> # CONFIG_UNUSED_SYMBOLS is not set
> CONFIG_DEBUG_FS=y
> # CONFIG_HEADERS_CHECK is not set
> CONFIG_DEBUG_KERNEL=y
> # CONFIG_DEBUG_SHIRQ is not set
> CONFIG_DETECT_SOFTLOCKUP=y
> CONFIG_SCHED_DEBUG=y
> # CONFIG_SCHEDSTATS is not set
> # CONFIG_TIMER_STATS is not set
> # CONFIG_DEBUG_SLAB is not set
> # CONFIG_DEBUG_PREEMPT is not set
> # CONFIG_DEBUG_RT_MUTEXES is not set
> # CONFIG_RT_MUTEX_TESTER is not set
> # CONFIG_DEBUG_SPINLOCK is not set
> # CONFIG_DEBUG_MUTEXES is not set
> # CONFIG_DEBUG_LOCK_ALLOC is not set
> # CONFIG_PROVE_LOCKING is not set
> # CONFIG_LOCK_STAT is not set
> # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
> # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
> # CONFIG_DEBUG_KOBJECT is not set
> CONFIG_DEBUG_BUGVERBOSE=y
> # CONFIG_DEBUG_INFO is not set
> # CONFIG_DEBUG_VM is not set
> # CONFIG_DEBUG_LIST is not set
> # CONFIG_DEBUG_SG is not set
> # CONFIG_FRAME_POINTER is not set
> # CONFIG_FORCED_INLINING is not set
> # CONFIG_BOOT_PRINTK_DELAY is not set
> # CONFIG_RCU_TORTURE_TEST is not set
> # CONFIG_LKDTM is not set
> # CONFIG_FAULT_INJECTION is not set
> # CONFIG_SAMPLES is not set
> CONFIG_EARLY_PRINTK=y
> # CONFIG_DEBUG_STACKOVERFLOW is not set
> # CONFIG_DEBUG_STACK_USAGE is not set
> CONFIG_DEBUG_RODATA=y
> # CONFIG_IOMMU_DEBUG is not set
> 
> #
> # Security options
> #
> CONFIG_KEYS=y
> CONFIG_KEYS_DEBUG_PROC_KEYS=y
> CONFIG_SECURITY=y
> CONFIG_SECURITY_NETWORK=y
> # CONFIG_SECURITY_NETWORK_XFRM is not set
> # CONFIG_SECURITY_CAPABILITIES is not set
> # CONFIG_SECURITY_ROOTPLUG is not set
> CONFIG_SECURITY_SELINUX=y
> CONFIG_SECURITY_SELINUX_BOOTPARAM=y
> CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
> CONFIG_SECURITY_SELINUX_DISABLE=y
> CONFIG_SECURITY_SELINUX_DEVELOP=y
> CONFIG_SECURITY_SELINUX_AVC_STATS=y
> CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
> # CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
> # CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
> CONFIG_CRYPTO=y
> CONFIG_CRYPTO_ALGAPI=y
> CONFIG_CRYPTO_BLKCIPHER=y
> CONFIG_CRYPTO_HASH=y
> CONFIG_CRYPTO_MANAGER=y
> CONFIG_CRYPTO_HMAC=y
> CONFIG_CRYPTO_XCBC=y
> CONFIG_CRYPTO_NULL=y
> CONFIG_CRYPTO_MD4=y
> CONFIG_CRYPTO_MD5=y
> CONFIG_CRYPTO_SHA1=y
> CONFIG_CRYPTO_SHA256=y
> CONFIG_CRYPTO_SHA512=y
> CONFIG_CRYPTO_WP512=y
> CONFIG_CRYPTO_TGR192=y
> CONFIG_CRYPTO_GF128MUL=y
> CONFIG_CRYPTO_ECB=y
> CONFIG_CRYPTO_CBC=y
> CONFIG_CRYPTO_PCBC=m
> CONFIG_CRYPTO_LRW=y
> # CONFIG_CRYPTO_XTS is not set
> # CONFIG_CRYPTO_CRYPTD is not set
> CONFIG_CRYPTO_DES=y
> # CONFIG_CRYPTO_FCRYPT is not set
> CONFIG_CRYPTO_BLOWFISH=y
> CONFIG_CRYPTO_TWOFISH=y
> CONFIG_CRYPTO_TWOFISH_COMMON=y
> CONFIG_CRYPTO_TWOFISH_X86_64=y
> CONFIG_CRYPTO_SERPENT=y
> CONFIG_CRYPTO_AES=y
> CONFIG_CRYPTO_AES_X86_64=y
> CONFIG_CRYPTO_CAST5=y
> CONFIG_CRYPTO_CAST6=y
> CONFIG_CRYPTO_TEA=y
> CONFIG_CRYPTO_ARC4=y
> CONFIG_CRYPTO_KHAZAD=y
> CONFIG_CRYPTO_ANUBIS=y
> # CONFIG_CRYPTO_SEED is not set
> CONFIG_CRYPTO_DEFLATE=y
> CONFIG_CRYPTO_MICHAEL_MIC=y
> CONFIG_CRYPTO_CRC32C=y
> # CONFIG_CRYPTO_CAMELLIA is not set
> # CONFIG_CRYPTO_TEST is not set
> # CONFIG_CRYPTO_AUTHENC is not set
> CONFIG_CRYPTO_HW=y
> 
> #
> # Library routines
> #
> CONFIG_BITREVERSE=y
> CONFIG_CRC_CCITT=y
> CONFIG_CRC16=y
> # CONFIG_CRC_ITU_T is not set
> CONFIG_CRC32=y
> # CONFIG_CRC7 is not set
> CONFIG_LIBCRC32C=y
> CONFIG_ZLIB_INFLATE=y
> CONFIG_ZLIB_DEFLATE=y
> CONFIG_TEXTSEARCH=y
> CONFIG_TEXTSEARCH_KMP=m
> CONFIG_TEXTSEARCH_BM=m
> CONFIG_TEXTSEARCH_FSM=m
> CONFIG_PLIST=y
> CONFIG_HAS_IOMEM=y
> CONFIG_HAS_IOPORT=y
> CONFIG_HAS_DMA=y
> CONFIG_CHECK_SIGNATURE=y
> 

Re: [patch 0/3] Per cpu relocation to ZERO and x86_32 percpu ops on x86_64

[Ingo Molnar]

* Christoph Lameter <clameter@sgi.com> wrote:

> On Fri, 30 Nov 2007, Ingo Molnar wrote:
> 
> > 
> > and the patches dont even build on 64-bit x86:
> > 
> > kernel/module.c: In function 'load_module':
> > kernel/module.c:1989: error: '__per_cpu_offset' undeclared (first use in this function)
> > kernel/module.c:1989: error: (Each undeclared identifier is reported only once
> > kernel/module.c:1989: error: for each function it appears in.)
> > 
> > config below. I'm dropping the patches for now. (again, this might be my 
> > mismerge)
> 
> Right. The above is a result of your missing a cleanup patch from mm 
> that fixes the module issue. Again running mm will take care of all of 
> these things.

you mean this single patch:

 modules-fold-percpu_modcopy-into-modulec-and-get-rid-of-the-macro-from-hell.patch

that's the only patch i missed AFAICS.

	Ingo

Re: [patch 0/3] Per cpu relocation to ZERO and x86_32 percpu ops on x86_64

[Christoph Lameter]

On Fri, 30 Nov 2007, Ingo Molnar wrote:

> you mean this single patch:
> 
>  modules-fold-percpu_modcopy-into-modulec-and-get-rid-of-the-macro-from-hell.patch
> 
> that's the only patch i missed AFAICS.

That is a pretty uncritical one. Then there is the fix of the zero address 
handling in modules.c, the fixup for the use of __per_cpu_xx variables in 
modules.c. etc.

It would be best to test against mm since there are core changes here that 
will have to wait to the next merge period.

Re: [patch 0/3] Per cpu relocation to ZERO and x86_32 percpu ops on x86_64

[Ingo Molnar]

* Christoph Lameter <clameter@sgi.com> wrote:

> On Fri, 30 Nov 2007, Ingo Molnar wrote:
> 
> > you mean this single patch:
> > 
> >  modules-fold-percpu_modcopy-into-modulec-and-get-rid-of-the-macro-from-hell.patch
> > 
> > that's the only patch i missed AFAICS.
> 
> That is a pretty uncritical one. Then there is the fix of the zero 
> address handling in modules.c, the fixup for the use of __per_cpu_xx 
> variables in modules.c. etc.

you again talk about modules.c but my test kernel that crashes has no 
modules at all.

> It would be best to test against mm since there are core changes here 
> that will have to wait to the next merge period.

if you treat testing and review efforts like that they might have to 
wait even longer :-( "My stuff is there somewhere amongst 1415 -mm 
patches. Thank you for your interest and buzz off already."

	Ingo

Re: [patch 0/3] Per cpu relocation to ZERO and x86_32 percpu ops on x86_64

[Ingo Molnar]

* Christoph Lameter <clameter@sgi.com> wrote:

> > you mean this single patch:
> > 
> >  modules-fold-percpu_modcopy-into-modulec-and-get-rid-of-the-macro-from-hell.patch
> > 
> > that's the only patch i missed AFAICS.
> 
> That is a pretty uncritical one. Then there is the fix of the zero 
> address handling in modules.c, [...]

modules-handle-symbols-that-have-a-zero-value.patch

> [...] the fixup for the use of __per_cpu_xx variables in modules.c. 
> [...]

modules-include-sectionsh-to-avoid-defining-linker-variables.patch

> etc.

such as? I guess these two:

mm-prevent-dereferencing-non-allocated-per_cpu-variables.patch
mm-prevent-dereferencing-non-allocated-per_cpu-variables-fix.patch

would be needed too?

	Ingo

Re: [patch 0/3] Per cpu relocation to ZERO and x86_32 percpu ops on x86_64

[Christoph Lameter]

On Fri, 30 Nov 2007, Ingo Molnar wrote:

> such as? I guess these two:
> 
> mm-prevent-dereferencing-non-allocated-per_cpu-variables.patch
> mm-prevent-dereferencing-non-allocated-per_cpu-variables-fix.patch
> 
> would be needed too?

I sent another list in an earlier email. AFAICT the above does not matter.

Early boot interactions with lockdep may be an issue if that is enabled.

Re: [patch 0/3] Per cpu relocation to ZERO and x86_32 percpu ops on x86_64

[Christoph Lameter]

On Fri, 30 Nov 2007, Ingo Molnar wrote:

> if you treat testing and review efforts like that they might have to 
> wait even longer :-( "My stuff is there somewhere amongst 1415 -mm 
> patches. Thank you for your interest and buzz off already."

Well I guess you have to get used to maintainership I think. F.e. the 
s390 people tested this patchset without requiring a backport. 
Typically arch maintainers test mm and do not force the patches back into 
mainline. I am a bit surprised since Andi and I never had this issue.

Re: [patch 0/3] Per cpu relocation to ZERO and x86_32 percpu ops on x86_64

[Ingo Molnar]

* Christoph Lameter <clameter@sgi.com> wrote:

> On Fri, 30 Nov 2007, Ingo Molnar wrote:
> 
> > if you treat testing and review efforts like that they might have to 
> > wait even longer :-( "My stuff is there somewhere amongst 1415 -mm 
> > patches. Thank you for your interest and buzz off already."
> 
> Well I guess you have to get used to maintainership I think. F.e. the 
> s390 people tested this patchset without requiring a backport. 
> Typically arch maintainers test mm and do not force the patches back 
> into mainline.

Huh?? This is getting absurd. Look at it from my perspective: i spent a 
few spare cycles on a Friday afternoon to check a few x86 relevant 
patches that looked interesting to me personally. At the moment they are 
still cooking in -mm and were not submitted to upstream merging yet - so 
i did not expect anything from them, but i wanted to help out because 
the patches looked good.

This was not any "formal" x86 maintainance activity - your patches are 
still cooking. But i was thinking about maybe putting these patches into 
the x86 test grind to get them shaken out some more the random 1000 
bootup tests a day that it does. When integrating your patches I found a 
bug and tentatively reported it to you, pointing out that it could 
easily be my merge fault. Basically i was offering you to let your 
patches cook in another kitchen as well. I never before had a negative 
response to that :-/

So i expected some "great that you are looking at this stuff, lemme help 
you sort it out, you missed these 2-3 patches in -mm" reaction (that's 
how i'd have reacted to you doing the same) instead i got these very 
surprising and fundamentlly hostile responses from you, an unfriendly 
"test -mm and dont pick out individual patches" suggestion and now this 
mail from you with this rather subtly formulated condescending tone:

> Well I guess you have to get used to maintainership I think. [...]

so i guess i'll leave it here for now with your percpu patches, i've got 
far better things to do on a Friday afternoon :-/ We'll deal with your 
stuff once it gets so far as upstream integration.

> I am a bit surprised since Andi and I never had this issue.

huh??? I am really wondering where this hostile attitude of yours comes 
from. Getting patches build and boot is something architecture 
maintainers do on a regular basis, it's a minimum requirement before 
getting something merged into an architecture.

And btw., -rc3-mm2 seems to have grown a spontaneous reboot problem, 
that looks quite similar to what i saw:

  http://kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc3/2.6.24-rc3-mm2/announce.txt

| - First bug report: after ten minutes happily compiling kernels my
|   2.6.24-rc3-mm2 x86_64 box spontaneously rebooted.

so from now on i guess i'll have to tag you as "does not want any 
advance testing and review help with his patches" person and will leave 
you alone.

	Ingo

Re: [patch 0/3] Per cpu relocation to ZERO and x86_32 percpu ops on x86_64

[Christoph Lameter]

On Fri, 30 Nov 2007, Ingo Molnar wrote:

> This was not any "formal" x86 maintainance activity - your patches are 
> still cooking. But i was thinking about maybe putting these patches into 
> the x86 test grind to get them shaken out some more the random 1000 
> bootup tests a day that it does. When integrating your patches I found a 
> bug and tentatively reported it to you, pointing out that it could 
> easily be my merge fault. Basically i was offering you to let your 
> patches cook in another kitchen as well. I never before had a negative 
> response to that :-/

You could have asked me for a patch against the x86 tree instead of 
forcing these into your tree. Then I could have made sure that everything 
is okay for your tests, I would have put the stuff into a git tree for you 
to pull etc. I'd be glad if you would test this but if at least if you get 
these kinds of rejects then its probably wise to stop and reconsider your 
approach.

> > I am a bit surprised since Andi and I never had this issue.
> 
> huh??? I am really wondering where this hostile attitude of yours comes 
> from. Getting patches build and boot is something architecture 
> maintainers do on a regular basis, it's a minimum requirement before 
> getting something merged into an architecture.

Hostile? AFAICT this is not the usual way how things are handled with mm 
patches. Preparing a patch against mainline would take some doing.
 
> And btw., -rc3-mm2 seems to have grown a spontaneous reboot problem, 
> that looks quite similar to what i saw:
> 
>   http://kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc3/2.6.24-rc3-mm2/announce.txt

Side swipe against mm? ;-) mm2 works fine here. What is so bad about mm?

> so from now on i guess i'll have to tag you as "does not want any 
> advance testing and review help with his patches" person and will leave 
> you alone.

I have tried to help you as best as I could in a endeavor that I 
expected to be fruitless while warning you not to go down that route.

I am in the same situation supposed to go on vacation from today till the 
12th. I took some hours to test your config and figure out how to clean up 
the mess.

Re: [patch 0/3] Per cpu relocation to ZERO and x86_32 percpu ops on x86_64

[Ingo Molnar]

* Christoph Lameter <clameter@sgi.com> wrote:

> > And btw., -rc3-mm2 seems to have grown a spontaneous reboot problem, 
> > that looks quite similar to what i saw:
> > 
> >   http://kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc3/2.6.24-rc3-mm2/announce.txt
> 
> Side swipe against mm? ;-) mm2 works fine here. What is so bad about 
> mm?

you snipped out this bit where Andrew wrote:

> | - First bug report: after ten minutes happily compiling kernels my
> |   2.6.24-rc3-mm2 x86_64 box spontaneously rebooted.

which answers your question: i only pointed out that this is very 
similar to what i saw, spontaneous reboots. So why did you call this a 
"side swipe"? I connected up different bugreports. I do not claim that 
Andrew's reboot was necessarily due to the percpu patches, i just 
pointed out the similarity of the symptoms.

	Ingo

Re: [patch 3/3] x86_64: Make the x86_32 percpu operations usable on x86_64

[Christoph Lameter]

The following fix is needed for UP (did not have time to do proper 
testing, some people will get mad at me if I do not get into a vacation 
mode now, be back on the 13th of December):

Fix UP setup

The __per_cpu_start offset is still needed in a UP configuration. There we 
do not relocate the percpu area. So we must subtract __per_cpu_start in
setup64.c. It will be zero if the percpu area is relocated.

Signed-off-by: Christoph Lameter <clameter@sgi.com>

---
 arch/x86/kernel/setup64.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Index: linux-2.6.24-rc3-mm2/arch/x86/kernel/setup64.c
===================================================================
--- linux-2.6.24-rc3-mm2.orig/arch/x86/kernel/setup64.c	2007-11-30 11:41:23.989455039 -0800
+++ linux-2.6.24-rc3-mm2/arch/x86/kernel/setup64.c	2007-11-30 11:41:47.497905579 -0800
@@ -115,7 +115,7 @@ void __init setup_per_cpu_areas(void)
 		/* Relocate the pda */
 		memcpy(ptr, cpu_pda(i), sizeof(struct x8664_pda));
 		cpu_pda(i) = (struct x8664_pda *)ptr;
-		cpu_pda(i)->data_offset = (unsigned long)ptr;
+		cpu_pda(i)->data_offset = ptr - __per_cpu_start;
 	}
 	/* Fix up pda for this processor .... */
 	pda_init(0);

Re: [patch 0/3] Per cpu relocation to ZERO and x86_32 percpu ops on x86_64

[Christoph Lameter]

On Fri, 30 Nov 2007, Ingo Molnar wrote:

> which answers your question: i only pointed out that this is very 
> similar to what i saw, spontaneous reboots. So why did you call this a 
> "side swipe"? I connected up different bugreports. I do not claim that 
> Andrew's reboot was necessarily due to the percpu patches, i just 
> pointed out the similarity of the symptoms.

Ahh. Ok. I was also wrong to assume hostility.

Re: [patch 0/3] Per cpu relocation to ZERO and x86_32 percpu ops on x86_64

[Ingo Molnar]

* Christoph Lameter <clameter@sgi.com> wrote:

> On Fri, 30 Nov 2007, Ingo Molnar wrote:
> 
> > This was not any "formal" x86 maintainance activity - your patches are 
> > still cooking. But i was thinking about maybe putting these patches into 
> > the x86 test grind to get them shaken out some more the random 1000 
> > bootup tests a day that it does. When integrating your patches I found a 
> > bug and tentatively reported it to you, pointing out that it could 
> > easily be my merge fault. Basically i was offering you to let your 
> > patches cook in another kitchen as well. I never before had a negative 
> > response to that :-/
> 
> You could have asked me for a patch against the x86 tree instead of 
> forcing these into your tree. [...]

ugh? What i did was something even better: i merged your patches myself 
(with some caveats, which i pointed out). That's something that people 
consider as a "cool, you just saved me some work!" moment, not a "hey, 
dont you dare forcing MY patches into your tree" incident ;-) At least 
that's how 99.9% of the people on lkml typically see it.

You really need to take a vacation ASAP! =B-)

	Ingo

Re: [patch 0/3] Per cpu relocation to ZERO and x86_32 percpu ops on x86_64

[Ingo Molnar]

btw., this is the list of patches i've picked up for testing:

modules-include-sectionsh-to-avoid-defining-linker-variables.patch
modules-handle-symbols-that-have-a-zero-value.patch
modules-fold-percpu_modcopy-into-modulec-and-get-rid-of-the-macro-from-hell.patch

percpu1-percpu-use-a-kconfig-variable-to-signal-arch-specific-percpu-setup.patch
percpu1-percpu-move-arch-xx-per-cpu-xx-definitions-into-linux-percpu-h.patch
percpu1-percpu-make-the-asm-generic-percpu-h-more-generic-.patch
percpu1-x86-32-use-generic-percpu-h.patch
percpu1-x86-64-use-generic-percpu.patch
percpu1-s390-use-generic-percpu.patch
percpu1-powerpc-use-generic-per-cpu.patch
percpu1-sparc64-use-generic-percpu.patch
percpu1-ia64-use-generic-percpu.patch
percpu1-x86-unify-percpu-h.patch

percpu2-percpu-infrastructure-to-rebase-the-per-cpu-area-to-0ul.patch
percpu2-x86-64-declare-pda-as-per-cpu-data-thereby-moving-it-into-the-cpu-area.patch
percpu2-x86-64-make-the-x86-32-percpu-operations-usable-on-x86-64.patch

the first 3 are from -mm, the rest from lkml. This series applied 
cleanly without any rejects but i still got the spontaneous reboot 
during bootup on UP 32-bit x86.

So either i'm still missing some essential patch, or this tree somehow 
triggers the problem more likely than in -mm. I've bisected it down to:

 percpu1-percpu-move-arch-xx-per-cpu-xx-definitions-into-linux-percpu-h.patch

that patch looks harmless though. Anyway, we can certainly revisit this 
issue after you get back on Dec 13th.

	Ingo

Re: [patch 1/3] Percpu infrastructure to rebase the per cpu area to 0UL

[Rusty Russell]

On Friday 30 November 2007 17:43:06 Christoph Lameter wrote:
> Support an option
>
> 	CONFIG_PERCPU_ZERO_BASED
>
> that makes offsets for per cpu variables start at zero.
>
> If a percpu area starts at zero then
>
> 1. We do not need RELOC_HIDE anymore

Hi Christoph,

    Why do you think this is true?  You're still doing arithmetic on variable 
addresses beyond the bound of the variable.

> 2. Indexes off the per cpu area for each processor are small
>
> 3. The percpu area "addresses" are offsets and we can then
>    have allocpercpu/cpu_alloc in the future also use these
>    offsets so that percpu functions can take any type of
>    percpu address if it is provided by a percpu variable
>    or a pointer obtained via allocpercpu/cpu_alloc.

This last point is orthogonal to offsetting at zero though...

> +#ifdef CONFIG_PERCPU_ZERO_BASED
> +extern char __per_cpu_load[];
> +extern char ____per_cpu_size[];
> +#define __per_cpu_size ((unsigned long)&____per_cpu_size)
> +#define __per_cpu_start ((char *)0)
> +#define __per_cpu_end ((char *)__per_cpu_size)
> +#else
>  extern char __per_cpu_start[], __per_cpu_end[];
> +#define __per_cpu_load __per_cpu_start
> +#define __per_cpu_size (__per_cpu_end - __per_cpu_start)
> +#endif

Hmm, can't you just define __per_cpu_start and __per_cpu_end in the linker 
script and fold this code back together again?

>  	for_each_possible_cpu(i) {
> -		start = (unsigned long) &__per_cpu_start + per_cpu_offset(i);
> -		end   = (unsigned long) &__per_cpu_start + PERCPU_ENOUGH_ROOM
> +		start = (unsigned long) __per_cpu_start + per_cpu_offset(i);
> +		end   = (unsigned long) __per_cpu_start + PERCPU_ENOUGH_ROOM
>  					+ per_cpu_offset(i);

I found the original clearer; why change it?

Cheers,
Rusty.

Re: [patch 1/3] Percpu infrastructure to rebase the per cpu area to 0UL

[Rusty Russell]

On Friday 30 November 2007 17:43:06 Christoph Lameter wrote:
> Support an option
>
> 	CONFIG_PERCPU_ZERO_BASED

Minor nitpicks aside, I like this patch (using AT() was a nice touch: I tried 
using section-relative relocs originally and it gave horrible results).

But this belongs in a completely separate patch, since it could well break 
archs which don't have NUMA stuff set up yet:

> Index: linux-2.6.24-rc3-mm2/init/main.c
> ===================================================================
> --- linux-2.6.24-rc3-mm2.orig/init/main.c	2007-11-29 22:06:01.607326159
> -0800 +++ linux-2.6.24-rc3-mm2/init/main.c	2007-11-29 22:06:22.754826440
> -0800 @@ -370,18 +370,19 @@ EXPORT_SYMBOL(__per_cpu_offset);
>
>  static void __init setup_per_cpu_areas(void)
>  {
> -	unsigned long size, i;
> -	char *ptr;
> -	unsigned long nr_possible_cpus = num_possible_cpus();
> +	unsigned long size;
> +	int cpu;
>
>  	/* Copy section for each CPU (we discard the original) */
>  	size = ALIGN(PERCPU_ENOUGH_ROOM, PAGE_SIZE);
> -	ptr = alloc_bootmem_pages(size * nr_possible_cpus);
>
> -	for_each_possible_cpu(i) {
> -		__per_cpu_offset[i] = ptr - __per_cpu_start;
> -		memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
> -		ptr += size;
> +	for_each_possible_cpu(cpu) {
> +		char *ptr;
> +
> +		ptr = alloc_bootmem_pages_node(NODE_DATA(cpu_to_node(cpu)),
> +								size);
> +		__per_cpu_offset[cpu] = ptr - __per_cpu_start;
> +		memcpy(ptr, __per_cpu_load, __per_cpu_size);
>  	}
>  }

Thanks!
Rusty.