From: Andrew Morton <akpm@linux-foundation.org>
To: Parag Warudkar <parag.warudkar@gmail.com>
Cc: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org,
"Tom Lanyon" <tomlanyon@gmail.com>
Subject: Re: Failure with SATA DVD-RW
Date: Thu, 6 Dec 2007 16:40:43 -0800 [thread overview]
Message-ID: <20071206164043.589290f4.akpm@linux-foundation.org> (raw)
In-Reply-To: <loom.20071206T012459-620@post.gmane.org>
(argh, shit, resent. Please don't massage the cc list. Do reply-to-all)
On Thu, 6 Dec 2007 01:33:16 +0000 (UTC)
Parag Warudkar <parag.warudkar@gmail.com> wrote:
> Tom Lanyon <tomlanyon <at> gmail.com> writes:
>
> > scsi4: ahci
> > ata5: SATA link up at 1.5 Gbps (SStatus 113 SControl 300)
> > ata5.00: ATAPI, max UDMA/66
> > ata5.00: qc timeout (cmd 0xef)
> > ata5.00: failed to set xfermode (err_mask=0x104)
> > ata5.00: limiting speed to UDMA/44
> > ata5: failed to recover some devices, retrying in 5 secs
> > ata5: port is slow to respond, please be patient (Status 0x80)
> > ata5: port failed to respond (30 secs, status 0x80)
> > ata5: COMRESET failed (device not ready)
> > ata5: hardreset failed, retrying in 5 secs
> > ata5: SATA link up at 1.5 Gbps (SStatus 113 SControl 300)
> > ata5.00: ATAPI, max UDMA/66
> > ata5.00: qc timeout (cmd 0xef)
> > ata5.00: failed to set xfermode (err_mask=0x104)
> > ata5.00: limiting speed to PIO0
> > ata5: failed to recover some devices, retrying in 5 secs
> > ata5: port is slow to respond, please be patient (Status 0x80)
> > ata5: port failed to respond (30 secs, status 0x80)
> > ata5: COMRESET failed (device not ready)
> > ata5: hardreset failed, retrying in 5 secs
> > ata5.00: ATAPI, max UDMA/66
> > ata5.00: qc timeout (cmd 0xef)
> > ata5.00: failed to set xfermode (err_mask=0x104)
> > ata5.00: disabled
> >
> Looks like it is trying to set transfer mode to UDMA/66 and failing. After
> that it tried UDMA/44 and failed again. Next UDMA/66 again with unsurprising
> result - failed. After that PIO0 which seems to cause some kind of trouble,
> then it tries UDMA/66 again, and I am not stating the result again :) !
>
> > Any ideas what to try to get it working under AHCI?
> >
>
> I recall reading somewhere - the Pioneer drive needs UDMA/33 which it did not
> try in your case - need to some how have it try UDMA/33 but I don't find a
> boot parameter which will do that. So may be adding a quirk for this device to
> limit the xfer mode to 33 may work.
>
> What does your dmesg output for the drives look like when you run in IDE
> compat mode? (Particularly the DMA for this drive?)
>
Please cc linux-ide on sata, pata and ide-related issues.
If nothing happens within a few days please raise a report at
bugzilla.kernel.org so we can ignore this in an organised fashion, thanks.
next prev parent reply other threads:[~2007-12-07 0:41 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-05 0:08 Failure with SATA DVD-RW Tom Lanyon
2007-12-06 1:33 ` Parag Warudkar
2007-12-07 0:39 ` Andrew Morton
2007-12-07 0:40 ` Andrew Morton [this message]
2007-12-10 9:45 ` Tejun Heo
2007-12-07 2:12 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071206164043.589290f4.akpm@linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=parag.warudkar@gmail.com \
--cc=tomlanyon@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).