From: Alexey Dobriyan <adobriyan@gmail.com>
To: akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH 14/17] proc tty: switch amiserial to ->proc_fops
Date: Thu, 29 Jan 2009 20:54:51 +0300 [thread overview]
Message-ID: <20090129175451.GN21643@x200.localdomain> (raw)
In-Reply-To: <20090129174830.GA21643@x200.localdomain>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
---
drivers/char/amiserial.c | 62 ++++++++++++++++++++-------------------------
1 files changed, 28 insertions(+), 34 deletions(-)
diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c
index a58869e..fd3ebd1 100644
--- a/drivers/char/amiserial.c
+++ b/drivers/char/amiserial.c
@@ -79,6 +79,7 @@ static char *serial_version = "4.30";
#include <linux/ptrace.h>
#include <linux/ioport.h>
#include <linux/mm.h>
+#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/bitops.h>
@@ -1825,14 +1826,13 @@ static int rs_open(struct tty_struct *tty, struct file * filp)
* /proc fs routines....
*/
-static inline int line_info(char *buf, struct serial_state *state)
+static inline void line_info(struct seq_file *m, struct serial_state *state)
{
struct async_struct *info = state->info, scr_info;
char stat_buf[30], control, status;
- int ret;
unsigned long flags;
- ret = sprintf(buf, "%d: uart:amiga_builtin",state->line);
+ seq_printf(m, "%d: uart:amiga_builtin",state->line);
/*
* Figure out the current RS-232 lines
@@ -1864,55 +1864,49 @@ static inline int line_info(char *buf, struct serial_state *state)
strcat(stat_buf, "|CD");
if (info->quot) {
- ret += sprintf(buf+ret, " baud:%d",
- state->baud_base / info->quot);
+ seq_printf(m, " baud:%d", state->baud_base / info->quot);
}
- ret += sprintf(buf+ret, " tx:%d rx:%d",
- state->icount.tx, state->icount.rx);
+ seq_printf(m, " tx:%d rx:%d", state->icount.tx, state->icount.rx);
if (state->icount.frame)
- ret += sprintf(buf+ret, " fe:%d", state->icount.frame);
+ seq_printf(m, " fe:%d", state->icount.frame);
if (state->icount.parity)
- ret += sprintf(buf+ret, " pe:%d", state->icount.parity);
+ seq_printf(m, " pe:%d", state->icount.parity);
if (state->icount.brk)
- ret += sprintf(buf+ret, " brk:%d", state->icount.brk);
+ seq_printf(m, " brk:%d", state->icount.brk);
if (state->icount.overrun)
- ret += sprintf(buf+ret, " oe:%d", state->icount.overrun);
+ seq_printf(m, " oe:%d", state->icount.overrun);
/*
* Last thing is the RS-232 status lines
*/
- ret += sprintf(buf+ret, " %s\n", stat_buf+1);
- return ret;
+ seq_printf(m, " %s\n", stat_buf+1);
}
-static int rs_read_proc(char *page, char **start, off_t off, int count,
- int *eof, void *data)
+static int rs_proc_show(struct seq_file *m, void *v)
{
- int len = 0, l;
- off_t begin = 0;
-
- len += sprintf(page, "serinfo:1.0 driver:%s\n", serial_version);
- l = line_info(page + len, &rs_table[0]);
- len += l;
- if (len+begin > off+count)
- goto done;
- if (len+begin < off) {
- begin += len;
- len = 0;
- }
- *eof = 1;
-done:
- if (off >= len+begin)
- return 0;
- *start = page + (off-begin);
- return ((count < begin+len-off) ? count : begin+len-off);
+ seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version);
+ line_info(m, &rs_table[0]);
+ return 0;
}
+static int rs_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, rs_proc_show, NULL);
+}
+
+static const struct file_operations rs_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = rs_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
/*
* ---------------------------------------------------------------------
* rs_init() and friends
@@ -1951,9 +1945,9 @@ static const struct tty_operations serial_ops = {
.break_ctl = rs_break,
.send_xchar = rs_send_xchar,
.wait_until_sent = rs_wait_until_sent,
- .read_proc = rs_read_proc,
.tiocmget = rs_tiocmget,
.tiocmset = rs_tiocmset,
+ .proc_fops = &rs_proc_fops,
};
/*
--
1.5.6.5
next prev parent reply other threads:[~2009-01-29 17:49 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-29 17:48 [PATCH 01/17] proc tty: add struct tty_operations::proc_fops Alexey Dobriyan
2009-01-29 17:49 ` [PATCH 02/17] proc tty: switch cyclades to ->proc_fops Alexey Dobriyan
2009-01-29 17:49 ` [PATCH 03/17] proc tty: switch ip2 " Alexey Dobriyan
2009-01-29 17:49 ` [PATCH 04/17] proc tty: switch istallion " Alexey Dobriyan
2009-01-29 17:50 ` [PATCH 05/17] proc tty: switch synclink_cs " Alexey Dobriyan
2009-01-29 17:50 ` [PATCH 06/17] proc tty: switch stallion " Alexey Dobriyan
2009-01-29 17:50 ` [PATCH 07/17] proc tty: switch synclink " Alexey Dobriyan
2009-01-29 17:51 ` [PATCH 08/17] proc tty: switch synclink_gt " Alexey Dobriyan
2009-01-29 17:51 ` [PATCH 09/17] proc tty: switch synclinkmp " Alexey Dobriyan
2009-01-29 17:53 ` [PATCH 10/17] proc tty: switch sdio_uart " Alexey Dobriyan
2009-01-29 17:53 ` [PATCH 11/17] proc tty: switch serial_core " Alexey Dobriyan
2009-01-29 17:54 ` [PATCH 12/17] proc tty: switch usb-serial " Alexey Dobriyan
2009-01-29 17:54 ` [PATCH 13/17] proc tty: switch ircomm " Alexey Dobriyan
2009-01-29 17:54 ` Alexey Dobriyan [this message]
2009-01-29 17:55 ` [PATCH 15/17] proc tty: switch ia64 simserial " Alexey Dobriyan
2009-01-29 17:55 ` [PATCH 16/17] proc tty: switch xtensa iss console " Alexey Dobriyan
2009-01-29 17:55 ` [PATCH 17/17] proc tty: remove struct tty_operations::read_proc Alexey Dobriyan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090129175451.GN21643@x200.localdomain \
--to=adobriyan@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).