From: Sitsofe Wheeler <sitsofe@yahoo.com>
To: Jiri Slaby <jirislaby@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>,
linux-kernel@vger.kernel.org, linux-wireless@vger.kernel.org,
ath5k-devel@venema.h4ckr.net,
Nick Kossifidis <mickflemm@gmail.com>,
"Luis R. Rodriguez" <lrodriguez@atheros.com>,
Bob Copeland <me@bobcopeland.com>
Subject: Re: [TIP] BUG kmalloc-4096: Poison overwritten (ath5k_rx_skb_alloc)
Date: Sun, 22 Feb 2009 22:21:19 +0000 [thread overview]
Message-ID: <20090222222119.GA20224@silver.sucs.org> (raw)
In-Reply-To: <49A1CA01.9030501@gmail.com>
On Sun, Feb 22, 2009 at 10:56:17PM +0100, Jiri Slaby wrote:
> Could you append lspci -vvnnxxx of your adapter? Better along with
> ath_info[1] output.
lspci -vvnnxxx
00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 04)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:82d9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: <access denied>
00: 86 80 90 25 06 00 90 20 04 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 d9 82
30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 04) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:82d9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7f00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at ec00 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f7ec0000 (32-bit, non-prefetchable) [size=256K]
Capabilities: <access denied>
00: 86 80 92 25 07 00 90 00 04 00 00 03 00 00 80 00
10: 00 00 f0 f7 01 ec 00 00 08 00 00 d0 00 00 ec f7
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 d9 82
30: 00 00 00 00 d0 00 00 00 00 00 00 00 05 01 00 00
00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2792] (rev 04)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:82d9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at f7f80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00: 86 80 92 27 07 00 90 00 04 00 80 03 00 00 80 00
10: 00 00 f8 f7 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 d9 82
30: 00 00 00 00 d0 00 00 00 00 00 00 00 00 00 00 00
00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller [8086:2668] (rev 04)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8337]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7eb8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
00: 86 80 68 26 06 00 10 00 04 00 03 04 04 00 00 00
10: 04 80 eb f7 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 37 83
30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 00 00
00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 04) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00: 86 80 60 26 04 05 10 00 04 00 04 06 04 00 81 00
10: 00 00 00 00 00 00 00 00 00 04 04 00 f0 00 00 20
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 05 01 06 00
00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 04) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: fbf00000-fbffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00: 86 80 62 26 06 05 10 00 04 00 04 06 04 00 81 00
10: 00 00 00 00 00 00 00 00 00 03 03 00 f0 00 00 20
20: f0 fb f0 fb f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 02 06 00
00:1c.2 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 [8086:2664] (rev 04) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
Memory behind bridge: f8000000-fbefffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00: 86 80 64 26 06 05 10 00 04 00 04 06 04 00 81 00
10: 00 00 00 00 00 00 00 00 00 01 02 00 f0 00 00 20
20: 00 f8 e0 fb 01 f0 f1 f6 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 03 06 00
00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 04) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at e400 [size=32]
00: 86 80 58 26 05 00 80 02 04 00 03 0c 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 e4 00 00 00 00 00 00 00 00 00 00 43 10 d8 82
30: 00 00 00 00 00 00 00 00 00 00 00 00 03 01 00 00
00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 04) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at e480 [size=32]
00: 86 80 59 26 05 00 80 02 04 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 81 e4 00 00 00 00 00 00 00 00 00 00 43 10 d8 82
30: 00 00 00 00 00 00 00 00 00 00 00 00 07 02 00 00
00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 04) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e800 [size=32]
00: 86 80 5a 26 05 00 80 02 04 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 e8 00 00 00 00 00 00 00 00 00 00 43 10 d8 82
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 03 00 00
00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 04) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at e880 [size=32]
00: 86 80 5b 26 05 00 80 02 04 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 81 e8 00 00 00 00 00 00 00 00 00 00 43 10 d8 82
30: 00 00 00 00 00 00 00 00 00 00 00 00 05 04 00 00
00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:82d8]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7eb7c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00: 86 80 5c 26 06 00 90 02 04 20 03 0c 00 00 00 00
10: 00 7c eb f7 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 d8 82
30: 00 00 00 00 50 00 00 00 00 00 00 00 03 01 00 00
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d4) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00: 86 80 48 24 04 01 10 00 d4 01 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 05 05 20 f0 00 80 22
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 06 00
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 04)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:82d8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00: 86 80 41 26 07 00 00 02 04 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 d8 82
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA Controller [8086:2653] (rev 04) (prog-if 80 [Master])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Capabilities: <access denied>
00: 86 80 53 26 05 00 b0 02 04 80 01 01 00 00 00 00
10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
20: a1 ff 00 00 00 00 00 00 00 00 00 00 43 10 d8 82
30: 00 00 00 00 70 00 00 00 00 00 00 00 00 02 00 00
00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 04)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:82d8]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 0
Region 4: I/O ports at 0400 [size=32]
00: 86 80 6a 26 01 00 80 02 04 00 05 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 04 00 00 00 00 00 00 00 00 00 00 43 10 d8 82
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 00
01:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter [168c:001c] (rev 01)
Subsystem: Unknown device [1a3b:1026]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fbef0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
00: 8c 16 1c 00 07 00 10 00 01 00 00 02 04 00 00 00
10: 04 00 ef fb 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 01 50 00 00 3b 1a 26 10
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 00 00
03:00.0 Ethernet controller [0200]: Attansic Technology Corp. L2 100 Mbit Ethernet Adapter [1969:2048] (rev a0)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 27
Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at fbfa0000 [disabled] [size=128K]
Capabilities: <access denied>
00: 69 19 48 20 06 04 10 00 a0 00 00 02 04 00 00 00
10: 04 00 fc fb 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 33 82
30: 00 00 fa fb 40 00 00 00 00 00 00 00 0b 01 00 00
(I'm currently not on the problem network)
./ath_info fbef0000
sleep_ctl reg 00000000 reset_ctl reg 00000000
-==Device Information==-
MAC Revision: 2425 (0xe2)
Warning: Invalid EEPROM Magic number!
Device type: 3
/============== EEPROM Information =============\
| EEPROM Version: 5.3 | EEPROM Size: 4 kbit |
| EEMAP: 2 | Reg. Domain: 0x60 |
|================= Capabilities ================|
| 802.11a Support: no | Turbo-A disabled: yes |
| 802.11b Support: no | Turbo-G disabled: yes |
| 802.11g Support: yes | 2GHz XR disabled: yes |
| RFKill Support: yes | 5GHz XR disabled: yes |
| 32kHz Crystal: no | |
\===============================================/
/=========================================================\
| Calibration data common for all modes |
|=========================================================|
| CCK/OFDM gain delta: 1 |
| CCK/OFDM power delta: 5 |
| Scaled CCK delta: 5 |
| 2GHz Antenna gain: 1 |
| 5GHz Antenna gain: 4 |
| Turbo 2W maximum dBm: 38 |
| Target power start: 0x16e |
| EAR Start: 0x1b8 |
\=========================================================/
/=========================================================\
| Calibration data for 802.11g operation |
|=========================================================|
| I power: 0x00 | Q power: 0x13 |
| Use fixed bias: 0x01 | Max turbo power: 0x26 |
| Max XR power: 0x20 | Switch Settling Time: 0x28 |
| Tx/Rx attenuation: 0x19 | TX end to XLNA On: 0x00 |
| TX end to XPA Off: 0x00 | TX end to XPA On: 0x0e |
| 62db Threshold: 0x1c | XLNA gain: 0x00 |
| XPD: 0x01 | XPD gain: 0x0a |
| I gain: 0x00 | Tx/Rx margin: 0x01 |
| False detect backoff: 0x00 | Noise Floor Threshold: -1 |
| ADC desired size: -38 | PGA desired size: -80 |
|=========================================================|
| Antenna control 0: 0x00 | Antenna control 1: 0x01 |
| Antenna control 2: 0x22 | Antenna control 3: 0x22 |
| Antenna control 4: 0x00 | Antenna control 5: 0x00 |
| Antenna control 6: 0x02 | Antenna control 7: 0x21 |
| Antenna control 8: 0x21 | Antenna control 9: 0x00 |
| Antenna control 10: 0x00 | Antenna control 11: 0x02 |
|=========================================================|
| Octave Band 0: 3 | db 0: 3 |
| Octave Band 1: 4 | db 1: 4 |
| Octave Band 2: 0 | db 2: 0 |
| Octave Band 3: 0 | db 3: 0 |
\=========================================================/
/==================== Turbo mode infos ===================\
| Switch Settling time: 0x28 | Tx/Rx margin: 0x01 |
| Tx/Rx attenuation: 0x19 | ADC desired size: -32 |
| PGA desired size: -80 | |
\=========================================================/
/============== Per rate power calibration ===========\
| Freq | 6-24Mbit/s | 36Mbit/s | 48Mbit/s | 54Mbit/s |
|======|============|==========|===========|==========|
| 2412 | 16.00 | 15.00 | 14.00 | 13.00 |
|======|============|==========|===========|==========|
| 2437 | 16.00 | 15.00 | 14.00 | 13.00 |
|======|============|==========|===========|==========|
| 2472 | 16.00 | 15.00 | 14.00 | 13.00 |
\=====================================================/
/====================== Per channel power calibration ===================\
| Freq | pwr_i | pwr_0 | pwr_1 | pwr_2 | pwr_3 |
| | pddac_i | pddac_0 | pddac_1 | pddac_2 | pddac_3 |
|======|=========|=============|=============|=============|=============|
| 2412 | | | | | |
|------|---------|-------------|-------------|-------------|-------------|
| | 0 | 4.00 | 8.50 | 12.50 | 0.00 |
| | 10 | 15 | 47 | 83 | 0 |
|------|---------|-------------|-------------|-------------|-------------|
| | 10 | 13.00 | 16.00 | 18.00 | 20.50 |
| | 12 | 23 | 38 | 52 | 67 |
|======|=========|=============|=============|=============|=============|
| 2472 | | | | | |
|------|---------|-------------|-------------|-------------|-------------|
| | 0 | 4.00 | 8.50 | 13.00 | 0.00 |
| | 10 | 15 | 25 | 61 | 0 |
|------|---------|-------------|-------------|-------------|-------------|
| | 10 | 13.00 | 16.00 | 19.00 | 20.50 |
| | 9 | 18 | 33 | 45 | 46 |
|======|=========|=============|=============|=============|=============|
| 2484 | | | | | |
|------|---------|-------------|-------------|-------------|-------------|
| | 0 | 4.00 | 8.50 | 13.00 | 0.00 |
| | 10 | 15 | 20 | 55 | 0 |
|------|---------|-------------|-------------|-------------|-------------|
| | 10 | 12.50 | 16.00 | 19.00 | 20.00 |
| | 9 | 16 | 31 | 40 | 0 |
\========================================================================/
GPIO registers: CR 0x00000000, DO 0x00000000, DI 0x00000003
STA_ID0: 00:15:af:b6:12:07
STA_ID1: 0x10000712, AP: 0, IBSS: 0, KeyCache Disable: 0
TIMER0: 0x00000528, TBTT: 1320, TU: 0x109d0528
TIMER1: 0x000000e2, DMAb: 28, TU: 0x109d001c (-1292)
TIMER2: 0x000c00d0, SWBA: 32794, TU: 0x10c1801a (+2390770)
TIMER3: 0x000000e2, ATIM: 226, TU: 0x109d00e2 (-1094)
TSF: 0x0000004273c1c15f, TSFTU: 61552, TU: 0x109cf070
BEACON: 0x00108000
LAST_TSTP: 0x73c16196
--
Sitsofe | http://sucs.org/~sits/
next prev parent reply other threads:[~2009-02-22 22:21 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-22 11:18 [TIP] BUG kmalloc-4096: Poison overwritten (ath5k_rx_skb_alloc) Sitsofe Wheeler
2009-02-22 12:01 ` Jiri Slaby
2009-02-22 12:20 ` Sitsofe Wheeler
2009-02-22 12:47 ` Jiri Slaby
2009-02-22 14:47 ` Frederic Weisbecker
2009-02-22 17:02 ` Sitsofe Wheeler
2009-02-22 17:10 ` Frederic Weisbecker
2009-02-22 19:27 ` Jiri Slaby
2009-02-22 19:42 ` Frederic Weisbecker
2009-02-22 20:18 ` Sitsofe Wheeler
2009-02-22 20:27 ` Jiri Slaby
2009-02-22 20:30 ` Frederic Weisbecker
2009-02-22 21:56 ` Jiri Slaby
2009-02-22 22:21 ` Sitsofe Wheeler [this message]
2009-02-22 23:20 ` Jiri Slaby
2009-02-23 15:35 ` Bob Copeland
2009-02-23 16:03 ` Nick Kossifidis
2009-02-23 16:15 ` Nick Kossifidis
2009-02-23 16:21 ` Bob Copeland
2009-02-23 16:27 ` Nick Kossifidis
2009-02-23 16:30 ` Bob Copeland
2009-02-23 16:41 ` Nick Kossifidis
2009-02-23 16:44 ` Bob Copeland
2009-02-23 16:16 ` pat-lkml
2009-02-23 16:20 ` Nick Kossifidis
2009-02-23 22:22 ` Jiri Slaby
2009-02-23 22:43 ` Jiri Slaby
2009-02-23 23:08 ` Nick Kossifidis
2009-02-24 13:58 ` Bob Copeland
2009-02-24 21:47 ` Jiri Slaby
2009-02-25 14:01 ` Sitsofe Wheeler
2009-02-26 1:06 ` Bob Copeland
2009-02-26 20:53 ` Jiri Slaby
2009-02-26 21:05 ` Bob Copeland
2009-02-26 13:59 ` Bob Copeland
2009-02-26 17:03 ` Sitsofe Wheeler
2009-03-02 17:34 ` [ath5k-devel] " Bob Copeland
2009-03-03 4:12 ` Bob Copeland
2009-03-03 20:03 ` Sitsofe Wheeler
2009-03-04 12:07 ` Bob Copeland
2009-03-06 9:42 ` Sitsofe Wheeler
2009-03-07 4:47 ` Bob Copeland
2009-03-07 8:04 ` Sitsofe Wheeler
2009-03-07 13:34 ` Bob Copeland
2009-03-08 3:09 ` Bob Copeland
2009-03-08 9:28 ` Jiri Slaby
2009-03-08 16:10 ` Bob Copeland
2009-03-10 0:43 ` Bob Copeland
2009-03-10 8:19 ` Sitsofe Wheeler
2009-03-12 6:10 ` Sitsofe Wheeler
2009-03-13 9:52 ` Sitsofe Wheeler
2009-03-13 12:28 ` Bob Copeland
2009-03-20 13:14 ` Bob Copeland
2009-03-29 14:24 ` Sitsofe Wheeler
2009-03-29 15:14 ` Bob Copeland
2009-03-31 8:30 ` Sitsofe Wheeler
2009-05-13 21:44 ` Sitsofe Wheeler
2009-05-15 4:09 ` Bob Copeland
2009-05-18 10:05 ` Sitsofe Wheeler
2009-05-22 9:39 ` Sitsofe Wheeler
2009-05-22 12:06 ` Bob Copeland
2009-05-26 21:10 ` Sitsofe Wheeler
2009-06-28 20:23 ` Sitsofe Wheeler
2009-07-14 2:24 ` Bob Copeland
2009-02-26 1:11 ` Bob Copeland
2009-02-22 20:17 ` Bob Copeland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090222222119.GA20224@silver.sucs.org \
--to=sitsofe@yahoo.com \
--cc=ath5k-devel@venema.h4ckr.net \
--cc=fweisbec@gmail.com \
--cc=jirislaby@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=lrodriguez@atheros.com \
--cc=me@bobcopeland.com \
--cc=mickflemm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).