linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
To: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: LKML <linux-kernel@vger.kernel.org>,
	linux-mm <linux-mm@kvack.org>, Mel Gorman <mel@csn.ul.ie>,
	Rik van Riel <riel@redhat.com>,
	Minchan Kim <minchan.kim@gmail.com>,
	Balbir Singh <balbir@linux.vnet.ibm.com>,
	KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>,
	Christoph Lameter <cl@linux-foundation.org>,
	Andrea Arcangeli <aarcange@redhat.com>,
	Andrew Morton <akpm@linux-foundation.org>
Subject: Re: [RFC][BUGFIX][PATCH] memcg: fix underflow of mapped_file stat
Date: Wed, 14 Apr 2010 10:03:08 +0900	[thread overview]
Message-ID: <20100414100308.693c5650.kamezawa.hiroyu@jp.fujitsu.com> (raw)
In-Reply-To: <20100414095408.d7b352f1.nishimura@mxp.nes.nec.co.jp>

On Wed, 14 Apr 2010 09:54:08 +0900
Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> wrote:

> On Tue, 13 Apr 2010 15:14:00 +0900, KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> wrote:
> > On Tue, 13 Apr 2010 13:42:07 +0900
> > Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> wrote:
> > 
> > > Hi.
> > > 
> > > When I was testing page migration, I found underflow problem of "mapped_file" field
> > > in memory.stat. This is a fix for the problem.
> > > 
> > > This patch is based on mmotm-2010-04-05-16-09, and IIUC it conflicts with Mel's
> > > compaction patches, so I send it as RFC for now. After next mmotm, which will
> > > include those patches, I'll update and resend this patch.
> > > 
> > > ===
> > > From: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
> > > 
> > > page_add_file_rmap(), which can be called from remove_migration_ptes(), is
> > > assumed to increment memcg's stat of mapped file. But on success of page
> > > migration, the newpage(mapped file) has not been charged yet, so the stat will
> > > not be incremented. This behavior leads to underflow of memcg's stat because
> > > when the newpage is unmapped afterwards, page_remove_rmap() decrements the stat.
> > > This problem doesn't happen on failure path of page migration, because the old
> > > page(mapped file) hasn't been uncharge at the point of remove_migration_ptes().
> > > This patch fixes this problem by calling commit_charge(mem_cgroup_end_migration)
> > > before remove_migration_ptes().
> > > 
> > > Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
> > 
> > Nice catch. but...I want to make all kind of complicated things under
> > prepare/end migration. (And I want to avoid changes in migrate.c...)
> > 
> hmm, I want to call mem_cgroup_update_file_mapped() only where we update
> NR_FILE_MAPPED, but, okey, I see your concern.
> 

Thank you. 


> > Considering some racy condistions, I wonder memcg_update_file_mapped() itself
> > still need fixes..
> > 
> > So, how about this ? We already added FILE_MAPPED flags, then, make use of it.
> > ==
> > 
> > 
> > At migrating mapped file, events happens in following sequence.
> > 
> >  1. allocate a new page.
> >  2. get memcg of an old page.
> >  3. charge ageinst new page, before migration. But at this point
> >     no changes to page_cgroup, no commit-charge.
> >  4. page migration replaces radix-tree, old-page and new-page.
> >  5. page migration remaps the new page if the old page was mapped.
> >  6. memcg commits the charge for newpage.
> > 
> > Because "commit" happens after page-remap, we lose file_mapped
> > accounting information at migration.
> > 
> > This patch fixes it by accounting file_mapped information at
> > commiting charge.
> > 
> > Reported-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
> > Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
> > ---
> >  mm/memcontrol.c |   15 +++++++++++++--
> >  1 file changed, 13 insertions(+), 2 deletions(-)
> > 
> > Index: mmotm-temp/mm/memcontrol.c
> > ===================================================================
> > --- mmotm-temp.orig/mm/memcontrol.c
> > +++ mmotm-temp/mm/memcontrol.c
> > @@ -1435,11 +1435,13 @@ void mem_cgroup_update_file_mapped(struc
> >  
> >  	/*
> >  	 * Preemption is already disabled. We can use __this_cpu_xxx
> > +	 * We have no lock per page at inc/dec mapcount of pages. We have to do
> > +	 * check by ourselves under lock_page_cgroup().
> >  	 */
> > -	if (val > 0) {
> > +	if (val > 0 && !PageCgroupFileMapped(pc)) {
> >  		__this_cpu_inc(mem->stat->count[MEM_CGROUP_STAT_FILE_MAPPED]);
> >  		SetPageCgroupFileMapped(pc);
> > -	} else {
> > +	} else if (PageCgroupFileMapped(pc)) {
> >  		__this_cpu_dec(mem->stat->count[MEM_CGROUP_STAT_FILE_MAPPED]);
> >  		ClearPageCgroupFileMapped(pc);
> >  	}
> Adding likely() is better ? IIUC, these conditions are usually met except for
> the case of page migration. And, can you add a comment about it ?
> 
Sure.


> > @@ -2563,6 +2565,15 @@ void mem_cgroup_end_migration(struct mem
> >  	 */
> >  	if (ctype == MEM_CGROUP_CHARGE_TYPE_MAPPED)
> >  		mem_cgroup_uncharge_page(target);
> > +	else {
> > +		/*
> > +		 * When a migrated file cache is remapped, it's not charged.
> > +		 * Verify it. Because we're under lock_page(), there are
> > +		 * no race with uncharge.
> > +		 */
> > +		if (page_mapped(target))
> > +			mem_cgroup_update_file_mapped(mem, target, 1);
> > +	}
> We cannot rely on page lock, because when we succeeded in page migration,
> "target" = "newpage" has already unlocked in move_to_new_page(). So the "target"
> can be removed from the radix-tree theoretically(it's not related to this
> underflow problem, though).
> Shouldn't we call lock_page(target) and check "if (!target->mapping)" to handle
> this case(maybe in another patch) ?
> 
Sounds reasonable. I think about that.

Thanks,
-Kame


  reply	other threads:[~2010-04-14  1:07 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-04-13  4:42 [RFC][BUGFIX][PATCH] memcg: fix underflow of mapped_file stat Daisuke Nishimura
2010-04-13  6:14 ` KAMEZAWA Hiroyuki
2010-04-14  0:54   ` Daisuke Nishimura
2010-04-14  1:03     ` KAMEZAWA Hiroyuki [this message]
2010-04-14  1:40       ` KAMEZAWA Hiroyuki
2010-04-14  1:56         ` KAMEZAWA Hiroyuki
2010-04-14  3:06           ` KAMEZAWA Hiroyuki
2010-04-14  5:31             ` Daisuke Nishimura
2010-04-14  5:40               ` KAMEZAWA Hiroyuki
2010-04-15  2:22                 ` Daisuke Nishimura
2010-04-13  6:45 ` Balbir Singh
2010-04-15  3:05 ` [RFC][BUGFIX][PATCH 1/2] memcg: fix charge bypass route of migration KAMEZAWA Hiroyuki
2010-04-15  3:06   ` [RFC][BUGFIX][PATCH 2/2] memcg: fix file mapped underflow at migration (v2) KAMEZAWA Hiroyuki
2010-04-16 10:31     ` [RFC][BUGFIX][PATCH 2/2] memcg: fix file mapped underflow at migration (v3) KAMEZAWA Hiroyuki
2010-04-19  3:42       ` Daisuke Nishimura
2010-04-19  4:18         ` KAMEZAWA Hiroyuki
2010-04-19  8:07           ` Daisuke Nishimura
2010-04-19  8:26             ` KAMEZAWA Hiroyuki
2010-04-20  4:20               ` Daisuke Nishimura
2010-04-20  4:26                 ` KAMEZAWA Hiroyuki
2010-04-20  9:19                 ` KAMEZAWA Hiroyuki
2010-04-23  8:08                   ` Daisuke Nishimura
2010-04-23  8:23                     ` KAMEZAWA Hiroyuki
2010-04-15  6:43   ` [RFC][BUGFIX][PATCH 1/2] memcg: fix charge bypass route of migration Daisuke Nishimura
2010-04-15  6:56     ` KAMEZAWA Hiroyuki
2010-04-15  8:17       ` Andrea Arcangeli
2010-04-16 16:13         ` Interleave policy on 2M pages (was Re: [RFC][BUGFIX][PATCH 1/2] memcg: fix charge bypass route of migration) Christoph Lameter
2010-04-16 17:51           ` Andrea Arcangeli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100414100308.693c5650.kamezawa.hiroyu@jp.fujitsu.com \
    --to=kamezawa.hiroyu@jp.fujitsu.com \
    --cc=aarcange@redhat.com \
    --cc=akpm@linux-foundation.org \
    --cc=balbir@linux.vnet.ibm.com \
    --cc=cl@linux-foundation.org \
    --cc=kosaki.motohiro@jp.fujitsu.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mel@csn.ul.ie \
    --cc=minchan.kim@gmail.com \
    --cc=nishimura@mxp.nes.nec.co.jp \
    --cc=riel@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).