From: Randy Dunlap <randy.dunlap@oracle.com>
To: lkml <linux-kernel@vger.kernel.org>
Cc: akpm <akpm@linux-foundation.org>, Wim Van Sebroeck <wim@iguana.be>
Subject: [PATCH] watchdogs: fix several MODULE_PARM_DESC strings
Date: Sat, 1 May 2010 09:46:15 -0700 [thread overview]
Message-ID: <20100501094615.06fc4972.randy.dunlap@oracle.com> (raw)
From: Randy Dunlap <randy.dunlap@oracle.com>
Fix MODULE_PARM_DESC() strings in several watchdog drivers.
Some are simple as add a parenthesis.
Others are problems from __stringify() being used on a
variable name instead of a macro name, so the variable name
is produced in the string instead of its build-time value.
In these cases, create a macro for the value so that the
module param description string is useful.
Only pc87413_wdt has been built (due to toolchains).
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
---
BTW, in ep93xx_wdt.c, I can't find where WATCHDOG_TIMEOUT is
defined. Can someone point me to it, please?
(or does it not even build?)
drivers/watchdog/mpc8xxx_wdt.c | 2 +-
drivers/watchdog/pc87413_wdt.c | 8 +++++---
drivers/watchdog/pnx833x_wdt.c | 11 +++++++----
drivers/watchdog/s3c2410_wdt.c | 6 +++---
drivers/watchdog/shwdt.c | 2 +-
drivers/watchdog/wdt977.c | 2 +-
6 files changed, 18 insertions(+), 13 deletions(-)
--- lnx-2634-rc6.orig/drivers/watchdog/mpc8xxx_wdt.c
+++ lnx-2634-rc6/drivers/watchdog/mpc8xxx_wdt.c
@@ -53,7 +53,7 @@ static int mpc8xxx_wdt_init_late(void);
static u16 timeout = 0xffff;
module_param(timeout, ushort, 0);
MODULE_PARM_DESC(timeout,
- "Watchdog timeout in ticks. (0<timeout<65536, default=65535");
+ "Watchdog timeout in ticks. (0<timeout<65536, default=65535)");
static int reset = 1;
module_param(reset, bool, 0);
--- lnx-2634-rc6.orig/drivers/watchdog/pc87413_wdt.c
+++ lnx-2634-rc6/drivers/watchdog/pc87413_wdt.c
@@ -53,7 +53,9 @@
#define WDTO 0x11 /* Watchdog timeout register */
#define WDCFG 0x12 /* Watchdog config register */
-static int io = 0x2E; /* Address used on Portwell Boards */
+#define IO_DEFAULT 0x2E /* Address used on Portwell Boards */
+
+static int io = IO_DEFAULT;
static int timeout = DEFAULT_TIMEOUT; /* timeout value */
static unsigned long timer_enabled; /* is the timer enabled? */
@@ -583,12 +585,12 @@ MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
module_param(io, int, 0);
-MODULE_PARM_DESC(io, MODNAME " I/O port (default: " __MODULE_STRING(io) ").");
+MODULE_PARM_DESC(io, MODNAME " I/O port (default: " __MODULE_STRING(IO_DEFAULT) ").");
module_param(timeout, int, 0);
MODULE_PARM_DESC(timeout,
"Watchdog timeout in minutes (default="
- __MODULE_STRING(timeout) ").");
+ __MODULE_STRING(DEFAULT_TIMEOUT) ").");
module_param(nowayout, int, 0);
MODULE_PARM_DESC(nowayout,
--- lnx-2634-rc6.orig/drivers/watchdog/pnx833x_wdt.c
+++ lnx-2634-rc6/drivers/watchdog/pnx833x_wdt.c
@@ -33,6 +33,8 @@
#define PFX "pnx833x: "
#define WATCHDOG_TIMEOUT 30 /* 30 sec Maximum timeout */
#define WATCHDOG_COUNT_FREQUENCY 68000000U /* Watchdog counts at 68MHZ. */
+#define PNX_WATCHDOG_TIMEOUT (WATCHDOG_TIMEOUT * WATCHDOG_COUNT_FREQUENCY)
+#define PNX_TIMEOUT_VALUE 2040000000U
/** CONFIG block */
#define PNX833X_CONFIG (0x07000U)
@@ -47,20 +49,21 @@
static int pnx833x_wdt_alive;
/* Set default timeout in MHZ.*/
-static int pnx833x_wdt_timeout = (WATCHDOG_TIMEOUT * WATCHDOG_COUNT_FREQUENCY);
+static int pnx833x_wdt_timeout = PNX_WATCHDOG_TIMEOUT;
module_param(pnx833x_wdt_timeout, int, 0);
MODULE_PARM_DESC(timeout, "Watchdog timeout in Mhz. (68Mhz clock), default="
- __MODULE_STRING(pnx833x_wdt_timeout) "(30 seconds).");
+ __MODULE_STRING(PNX_TIMEOUT_VALUE) "(30 seconds).");
static int nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, int, 0);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-static int start_enabled = 1;
+#define START_DEFAULT 1
+static int start_enabled = START_DEFAULT;
module_param(start_enabled, int, 0);
MODULE_PARM_DESC(start_enabled, "Watchdog is started on module insertion "
- "(default=" __MODULE_STRING(start_enabled) ")");
+ "(default=" __MODULE_STRING(START_DEFAULT) ")");
static void pnx833x_wdt_start(void)
{
--- lnx-2634-rc6.orig/drivers/watchdog/s3c2410_wdt.c
+++ lnx-2634-rc6/drivers/watchdog/s3c2410_wdt.c
@@ -63,7 +63,7 @@ module_param(nowayout, int, 0);
module_param(soft_noboot, int, 0);
module_param(debug, int, 0);
-MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. default="
+MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. (default="
__MODULE_STRING(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME) ")");
MODULE_PARM_DESC(tmr_atboot,
"Watchdog is started at boot time if set to 1, default="
@@ -71,8 +71,8 @@ MODULE_PARM_DESC(tmr_atboot,
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, "
- "0 to reboot (default depends on ONLY_TESTING)");
-MODULE_PARM_DESC(debug, "Watchdog debug, set to >1 for debug, (default 0)");
+ "0 to reboot (default 0)");
+MODULE_PARM_DESC(debug, "Watchdog debug, set to >1 for debug (default 0)");
static unsigned long open_lock;
static struct device *wdt_dev; /* platform device attached to */
--- lnx-2634-rc6.orig/drivers/watchdog/wdt977.c
+++ lnx-2634-rc6/drivers/watchdog/wdt977.c
@@ -63,7 +63,7 @@ static char expect_close;
static DEFINE_SPINLOCK(spinlock);
module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (60..15300), default="
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (60..15300, default="
__MODULE_STRING(DEFAULT_TIMEOUT) ")");
module_param(testmode, int, 0);
MODULE_PARM_DESC(testmode, "Watchdog testmode (1 = no reboot), default=0");
--- lnx-2634-rc6.orig/drivers/watchdog/shwdt.c
+++ lnx-2634-rc6/drivers/watchdog/shwdt.c
@@ -496,7 +496,7 @@ MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
module_param(clock_division_ratio, int, 0);
MODULE_PARM_DESC(clock_division_ratio,
"Clock division ratio. Valid ranges are from 0x5 (1.31ms) "
- "to 0x7 (5.25ms). (default=" __MODULE_STRING(clock_division_ratio) ")");
+ "to 0x7 (5.25ms). (default=" __MODULE_STRING(WTCSR_CKS_4096) ")");
module_param(heartbeat, int, 0);
MODULE_PARM_DESC(heartbeat,
next reply other threads:[~2010-05-01 16:47 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-01 16:46 Randy Dunlap [this message]
2010-05-03 8:57 ` [PATCH] watchdogs: fix several MODULE_PARM_DESC strings Wim Van Sebroeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100501094615.06fc4972.randy.dunlap@oracle.com \
--to=randy.dunlap@oracle.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).