linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Florian Fainelli <florian@openwrt.org>
To: "Lars-Peter Clausen" <lars@metafoo.de>
Cc: Ralf Baechle <ralf@linux-mips.org>,
	linux-mips@linux-mips.org, linux-kernel@vger.kernel.org
Subject: Re: [RFC][PATCH 01/26] MIPS: Add base support for Ingenic JZ4740 System-on-a-Chip
Date: Thu, 3 Jun 2010 16:27:31 +0200	[thread overview]
Message-ID: <201006031627.31308.florian@openwrt.org> (raw)
In-Reply-To: <1275505397-16758-2-git-send-email-lars@metafoo.de>

Hi Lars,

On Wednesday 02 June 2010 21:02:52 Lars-Peter Clausen wrote:
> This patch adds a new cpu type for the JZ4740 to the Linux MIPS
> architecture code. It also adds the iomem addresses for the different
> components found on a JZ4740 SoC.
> 
> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
> ---
[snip]

>  	 * MIPS64 class processors
> diff --git a/arch/mips/include/asm/mach-jz4740/base.h
> b/arch/mips/include/asm/mach-jz4740/base.h new file mode 100644
> index 0000000..cba3aae
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-jz4740/base.h
> @@ -0,0 +1,28 @@
> +#ifndef __ASM_MACH_JZ4740_BASE_H__
> +#define __ASM_MACH_JZ4740_BASE_H__
> +
> +#define JZ4740_CPM_BASE_ADDR	0xb0000000
> +#define JZ4740_INTC_BASE_ADDR	0xb0001000
> +#define JZ4740_TCU_BASE_ADDR	0xb0002000
> +#define JZ4740_WDT_BASE_ADDR	0xb0002000
> +#define JZ4740_RTC_BASE_ADDR	0xb0003000
> +#define JZ4740_GPIO_BASE_ADDR	0xb0010000
> +#define JZ4740_AIC_BASE_ADDR	0xb0020000
> +#define JZ4740_ICDC_BASE_ADDR	0xb0020000
> +#define JZ4740_MSC_BASE_ADDR	0xb0021000
> +#define JZ4740_UART0_BASE_ADDR	0xb0030000
> +#define JZ4740_UART1_BASE_ADDR	0xb0031000
> +#define JZ4740_I2C_BASE_ADDR	0xb0042000
> +#define JZ4740_SSI_BASE_ADDR	0xb0043000
> +#define JZ4740_SADC_BASE_ADDR	0xb0070000
> +#define JZ4740_EMC_BASE_ADDR	0xb3010000
> +#define JZ4740_DMAC_BASE_ADDR	0xb3020000
> +#define JZ4740_UHC_BASE_ADDR	0xb3030000
> +#define JZ4740_UDC_BASE_ADDR	0xb3040000
> +#define JZ4740_LCD_BASE_ADDR	0xb3050000
> +#define JZ4740_SLCD_BASE_ADDR	0xb3050000
> +#define JZ4740_CIM_BASE_ADDR	0xb3060000
> +#define JZ4740_IPU_BASE_ADDR	0xb3080000
> +#define JZ4740_ETH_BASE_ADDR	0xb3100000

Any reasons why you prefered virtual addresses here instead of physical ones?
You might also want to define a "true" base address and compute the registers
offset relatively to this base address for better clarity.

> +
> +#endif
> diff --git a/arch/mips/include/asm/mach-jz4740/war.h
> b/arch/mips/include/asm/mach-jz4740/war.h new file mode 100644
> index 0000000..3a5bc17
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-jz4740/war.h
> @@ -0,0 +1,25 @@
> +/*
> + * This file is subject to the terms and conditions of the GNU General
> Public + * License.  See the file "COPYING" in the main directory of this
> archive + * for more details.
> + *
> + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
> + */
> +#ifndef __ASM_MIPS_MACH_JZ4740_WAR_H
> +#define __ASM_MIPS_MACH_JZ4740_WAR_H
> +
> +#define R4600_V1_INDEX_ICACHEOP_WAR	0
> +#define R4600_V1_HIT_CACHEOP_WAR	0
> +#define R4600_V2_HIT_CACHEOP_WAR	0
> +#define R5432_CP0_INTERRUPT_WAR		0
> +#define BCM1250_M3_WAR			0
> +#define SIBYTE_1956_WAR			0
> +#define MIPS4K_ICACHE_REFILL_WAR	0
> +#define MIPS_CACHE_SYNC_WAR		0
> +#define TX49XX_ICACHE_INDEX_INV_WAR	0
> +#define RM9000_CDEX_SMP_WAR		0
> +#define ICACHE_REFILLS_WORKAROUND_WAR	0
> +#define R10000_LLSC_WAR			0
> +#define MIPS34K_MISSED_ITLB_WAR		0
> +
> +#endif /* __ASM_MIPS_MACH_JZ4740_WAR_H */
> diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
> index 3562b85..9b66331 100644
> --- a/arch/mips/kernel/cpu-probe.c
> +++ b/arch/mips/kernel/cpu-probe.c
> @@ -187,6 +187,7 @@ void __init check_wait(void)
>  	case CPU_BCM6358:
>  	case CPU_CAVIUM_OCTEON:
>  	case CPU_CAVIUM_OCTEON_PLUS:
> +	case CPU_JZRISC:
>  		cpu_wait = r4k_wait;
>  		break;
> 
> @@ -956,6 +957,22 @@ platform:
>  	}
>  }
> 
> +static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int
> cpu) +{
> +	decode_configs(c);
> +	/* JZRISC does not implement the CP0 counter. */
> +	c->options &= ~MIPS_CPU_COUNTER;
> +	switch (c->processor_id & 0xff00) {
> +	case PRID_IMP_JZRISC:
> +		c->cputype = CPU_JZRISC;
> +		__cpu_name[cpu] = "Ingenic JZRISC";
> +		break;
> +	default:
> +		panic("Unknown Ingenic Processor ID!");
> +		break;
> +	}
> +}
> +
>  const char *__cpu_name[NR_CPUS];
>  const char *__elf_platform;
> 
> @@ -994,6 +1011,9 @@ __cpuinit void cpu_probe(void)
>  	case PRID_COMP_CAVIUM:
>  		cpu_probe_cavium(c, cpu);
>  		break;
> +	case PRID_COMP_INGENIC:
> +		cpu_probe_ingenic(c, cpu);
> +		break;
>  	}
> 
>  	BUG_ON(!__cpu_name[cpu]);
> diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
> index 86f004d..4510e61 100644
> --- a/arch/mips/mm/tlbex.c
> +++ b/arch/mips/mm/tlbex.c
> @@ -409,6 +409,11 @@ static void __cpuinit build_tlb_write_entry(u32 **p,
> struct uasm_label **l, tlbw(p);
>  		break;
> 
> +	case CPU_JZRISC:
> +		tlbw(p);
> +		uasm_i_nop(p);
> +		break;
> +
>  	default:
>  		panic("No TLB refill handler yet (CPU type: %d)",
>  		      current_cpu_data.cputype);

  reply	other threads:[~2010-06-03 14:28 UTC|newest]

Thread overview: 67+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-06-02 19:02 [RFC][PATCH 00/26] *** SUBJECT HERE *** Lars-Peter Clausen
2010-06-02 19:02 ` [RFC][PATCH 01/26] MIPS: Add base support for Ingenic JZ4740 System-on-a-Chip Lars-Peter Clausen
2010-06-03 14:27   ` Florian Fainelli [this message]
2010-06-03 17:03     ` Lars-Peter Clausen
2010-06-02 19:02 ` [RFC][PATCH 02/26] MIPS: jz4740: Add IRQ handler code Lars-Peter Clausen
2010-06-03 14:29   ` Florian Fainelli
2010-06-02 19:02 ` [RFC][PATCH 03/26] MIPS: JZ4740: Add clock API support Lars-Peter Clausen
2010-06-02 22:45   ` Graham Gower
2010-06-03 17:20     ` Lars-Peter Clausen
2010-06-02 19:02 ` [RFC][PATCH 04/26] MIPS: JZ4740: Add timer support Lars-Peter Clausen
2010-06-02 19:02 ` [RFC][PATCH 05/26] MIPS: JZ4740: Add clocksource/clockevent support Lars-Peter Clausen
2010-06-02 19:02 ` [RFC][PATCH 06/26] MIPS: JZ4740: Add power-management and system reset support Lars-Peter Clausen
2010-06-02 19:02 ` [RFC][PATCH 07/26] MIPS: JZ4740: Add setup code Lars-Peter Clausen
2010-06-02 19:02 ` [RFC][PATCH 08/26] MIPS: JZ4740: Add gpio support Lars-Peter Clausen
2010-06-02 19:10 ` [RFC][PATCH 09/26] MIPS: JZ4740: Add DMA support Lars-Peter Clausen
2010-06-02 19:10 ` [RFC][PATCH 10/26] MIPS: JZ4740: Add PWM support Lars-Peter Clausen
2010-06-02 19:10 ` [RFC][PATCH 11/26] MIPS: JZ4740: Add serial support Lars-Peter Clausen
2010-06-02 19:10 ` [RFC][PATCH 12/26] MIPS: JZ4740: Add prom support Lars-Peter Clausen
2010-06-02 19:10 ` [RFC][PATCH 13/26] MIPS: JZ4740: Add platform devices Lars-Peter Clausen
2010-06-02 19:10 ` [RFC][PATCH 14/26] MIPS: JZ4740: Add Kbuild files Lars-Peter Clausen
2010-06-04  0:47   ` Ralf Baechle
2010-06-02 19:10 ` [RFC][PATCH 15/26] RTC: Add JZ4740 RTC driver Lars-Peter Clausen
2010-06-05 15:48   ` [rtc-linux] " Wan ZongShun
2010-06-05 17:26     ` Lars-Peter Clausen
2010-06-02 19:10 ` [RFC][PATCH 16/26] fbdev: Add JZ4740 framebuffer driver Lars-Peter Clausen
2010-06-02 19:36   ` Andrew Morton
2010-06-02 20:05     ` Lars-Peter Clausen
2010-06-02 19:12 ` [RFC][PATCH 17/26] MTD: Nand: Add JZ4740 NAND driver Lars-Peter Clausen
2010-06-13  9:40   ` Artem Bityutskiy
2010-06-02 19:12 ` [RFC][PATCH 18/26] MMC: Add JZ4740 mmc driver Lars-Peter Clausen
2010-06-02 19:12 ` [RFC][PATCH 19/26] USB: Add JZ4740 ohci support Lars-Peter Clausen
2010-06-02 19:12 ` [RFC][PATCH 20/26] alsa: ASoC: Add JZ4740 codec driver Lars-Peter Clausen
2010-06-03  5:45   ` [alsa-devel] " Wan ZongShun
2010-06-03 12:03     ` Mark Brown
2010-06-03 12:32   ` Liam Girdwood
2010-06-03 12:50     ` Liam Girdwood
2010-06-03 16:58     ` Lars-Peter Clausen
2010-06-03 17:49   ` Mark Brown
2010-06-03 23:57     ` Lars-Peter Clausen
2010-06-03 23:59       ` Mark Brown
2010-06-02 19:12 ` [RFC][PATCH 21/26] alsa: ASoC: Add JZ4740 ASoC support Lars-Peter Clausen
2010-06-03  3:36   ` [alsa-devel] " Wan ZongShun
2010-06-03 12:48   ` Liam Girdwood
2010-06-03 16:50     ` Lars-Peter Clausen
2010-06-03 17:03       ` Liam Girdwood
2010-06-03 17:16         ` Lars-Peter Clausen
2010-06-03 17:25           ` Liam Girdwood
2010-06-03 17:37             ` Lars-Peter Clausen
2010-06-03 18:14             ` [alsa-devel] " Troy Kisky
2010-11-14 13:29               ` hi!!!! dkisky
2010-06-03 17:55   ` [RFC][PATCH 21/26] alsa: ASoC: Add JZ4740 ASoC support Mark Brown
2010-06-03 19:27     ` Lars-Peter Clausen
2010-06-02 19:12 ` [RFC][PATCH 22/26] hwmon: Add JZ4740 ADC driver Lars-Peter Clausen
2010-06-05 17:22   ` Jonathan Cameron
2010-06-05 19:08     ` Lars-Peter Clausen
2010-06-05 21:07       ` [lm-sensors] " Jonathan Cameron
2010-06-05 22:12         ` Lars-Peter Clausen
2010-06-02 19:12 ` [RFC][PATCH 23/26] power: Add JZ4740 battery driver Lars-Peter Clausen
2010-06-14 15:51   ` Anton Vorontsov
2010-06-15 17:28     ` Lars-Peter Clausen
2010-06-15 17:34     ` Ralf Baechle
2010-06-16 12:20       ` Mark Brown
2010-06-19  3:48         ` Lars-Peter Clausen
2010-06-02 19:12 ` [RFC][PATCH 24/26] MIPS: JZ4740: Add qi_lb60 board support Lars-Peter Clausen
2010-06-02 19:15 ` [RFC][PATCH 25/26] MIPS: Add defconfig for the qi_lb60 board Lars-Peter Clausen
2010-06-02 19:15 ` [RFC][PATCH 26/26] alsa: ASoC: JZ4740: Add qi_lb60 board driver Lars-Peter Clausen
2010-06-03 17:57   ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201006031627.31308.florian@openwrt.org \
    --to=florian@openwrt.org \
    --cc=lars@metafoo.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@linux-mips.org \
    --cc=ralf@linux-mips.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).