From: "Rafael J. Wysocki" <rjw@sisk.pl>
To: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Kernel Testers List <kernel-testers@vger.kernel.org>,
Maciej Rutecki <maciej.rutecki@gmail.com>,
Florian Mickler <florian@mickler.org>,
"Brian Bloniarz" <brian.bloniarz@gmail.com>,
"Yinghai Lu" <yinghai@kernel.org>,
chemobejk@gmail.com
Subject: Re: [Bug #16228] BUG/boot failure on Dell Precision T3500 (pci/ahci_stop_engine)
Date: Mon, 20 Sep 2010 23:07:09 +0200 [thread overview]
Message-ID: <201009202307.09943.rjw@sisk.pl> (raw)
In-Reply-To: <201009201445.00677.bjorn.helgaas@hp.com>
On Monday, September 20, 2010, Bjorn Helgaas wrote:
> On Monday, September 20, 2010 01:57:17 pm Rafael J. Wysocki wrote:
> > This message has been generated automatically as a part of a report
> > of regressions introduced between 2.6.34 and 2.6.35.
> >
> > The following bug entry is on the current list of known regressions
> > introduced between 2.6.34 and 2.6.35. Please verify if it still should
> > be listed and let the tracking team know (either way).
> >
> >
> > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=16228
> > Subject : BUG/boot failure on Dell Precision T3500 (pci/ahci_stop_engine)
> > Submitter : Brian Bloniarz <brian.bloniarz@gmail.com>
> > Date : 2010-06-16 17:57 (97 days old)
> > Handled-By : Bjorn Helgaas <bjorn.helgaas@hp.com>
>
> The four patches here: https://patchwork.kernel.org/patch/189182/
> should resolve this problem. They've been tested by Stefan Becker.
Thanks, bug entry updated with the patch information.
Rafael
next prev parent reply other threads:[~2010-09-20 21:08 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-20 19:54 2.6.36-rc4-git5: Reported regressions 2.6.34 -> 2.6.35 Rafael J. Wysocki
2010-09-20 19:54 ` [Bug #16184] Container, X86-64, i386, iptables rule Rafael J. Wysocki
2010-09-20 19:57 ` [Bug #16221] 2.6.35-rc2-git5 -- [drm:drm_mode_getfb] *ERROR* invalid framebuffer id Rafael J. Wysocki
2010-09-20 19:57 ` [Bug #16380] Loop devices act strangely in 2.6.35 Rafael J. Wysocki
2010-09-20 19:57 ` [Bug #16396] [bisected] resume from suspend freezes system Rafael J. Wysocki
2010-09-20 19:57 ` [Bug #16322] WARNING: at /arch/x86/include/asm/processor.h:1005 read_measured_perf_ctrs+0x5a/0x70() Rafael J. Wysocki
2010-09-20 19:57 ` [Bug #16265] Why is kslowd accumulating so much CPU time? Rafael J. Wysocki
2010-09-20 19:57 ` [Bug #16458] Bluetooth disabled after resume Rafael J. Wysocki
2010-09-20 19:57 ` [Bug #16228] BUG/boot failure on Dell Precision T3500 (pci/ahci_stop_engine) Rafael J. Wysocki
2010-09-20 20:44 ` Bjorn Helgaas
2010-09-20 21:07 ` Rafael J. Wysocki [this message]
2010-09-20 19:57 ` [Bug #16312] WARNING: at fs/fs-writeback.c:1127 __mark_inode_dirty Rafael J. Wysocki
2010-09-20 21:29 ` Jan Kara
2010-09-20 23:55 ` Rafael J. Wysocki
2010-09-20 19:57 ` [Bug #16462] unable to connect to AP on legal channel 13 Rafael J. Wysocki
2010-09-20 21:07 ` Daniel J Blueman
2010-09-20 21:09 ` Rafael J. Wysocki
2010-09-20 19:57 ` [Bug #16488] [i915] Framebuffer ID error after suspend/hibernate leading to X crash Rafael J. Wysocki
2010-09-20 19:57 ` [Bug #16495] Kernel 2.6.35 takes almost half an hour to boot Rafael J. Wysocki
2010-09-20 19:57 ` [Bug #16515] [bisected] Radeon rv280 can't boot on kernel 2.6.35 Rafael J. Wysocki
2010-09-22 2:55 ` Johan Kullstam
2010-09-20 19:57 ` [Bug #16537] TREE_RCU hangs at boot Rafael J. Wysocki
2010-09-20 19:57 ` [Bug #16525] unexpected high load since 2.6.35 Rafael J. Wysocki
2010-09-20 19:57 ` [Bug #16549] 2.6.35: suspicious rcu_dereference_check() usage Rafael J. Wysocki
2010-09-20 19:57 ` [Bug #16562] 2.6.35: cpu_idle bug report / on i7 870 cpu (x86_64) Rafael J. Wysocki
2010-09-20 19:57 ` [Bug #16614] [2.6.35] usb 2.0 em28xx kernel panic general protection fault: 0000 [#1] SMP RIP: 0010:[<ffffffffa004fbc5>] [<ffffffffa004fbc5>] em28xx_isoc_copy_vbi+0x62e/0x812 [em28xx] Rafael J. Wysocki
2010-09-20 19:57 ` [Bug #16633] ath5k + 2.6.35 x86 + hostapd - Failed to set channel Rafael J. Wysocki
2010-09-20 19:57 ` [Bug #16691] IPW5100: iwlagn broken with 2.6.34.x to 2.6.35.2 update Rafael J. Wysocki
2010-09-20 19:57 ` [Bug #18032] No sound on headphone jack Rafael J. Wysocki
2010-09-20 19:57 ` [Bug #17772] Unable to locate IOAPIC for GSI * Rafael J. Wysocki
2010-09-20 19:57 ` [Bug #17812] Kernel completely frozen when memory is full Rafael J. Wysocki
2010-09-20 19:57 ` [Bug #17732] [2.6.35.x regression] rcu_preempt_state stall warning and machine slow-downs Rafael J. Wysocki
2010-09-20 19:57 ` [Bug #18202] Microphone levels too low Rafael J. Wysocki
2010-09-20 19:57 ` [Bug #18522] [REGRESSION] cdrom drive doesn't detect removal Rafael J. Wysocki
2010-09-20 19:57 ` [Bug #18272] 2.6.35.*: horrible (exponential? >linear) slowdown to unusability (ACPI idle?) Rafael J. Wysocki
2010-09-20 20:33 ` Nix
2010-09-20 20:40 ` Rafael J. Wysocki
-- strict thread matches above, loose matches on Subject: below --
2010-10-17 20:53 2.6.36-rc8-git3: Reported regressions 2.6.34 -> 2.6.35 Rafael J. Wysocki
2010-10-17 20:55 ` [Bug #16228] BUG/boot failure on Dell Precision T3500 (pci/ahci_stop_engine) Rafael J. Wysocki
2010-10-10 19:10 2.6.36-rc7-git2: Reported regressions 2.6.34 -> 2.6.35 Rafael J. Wysocki
2010-10-10 19:18 ` [Bug #16228] BUG/boot failure on Dell Precision T3500 (pci/ahci_stop_engine) Rafael J. Wysocki
2010-10-03 21:36 2.6.36-rc6-git2: Reported regressions 2.6.34 -> 2.6.35 Rafael J. Wysocki
2010-10-03 21:53 ` [Bug #16228] BUG/boot failure on Dell Precision T3500 (pci/ahci_stop_engine) Rafael J. Wysocki
2010-09-26 20:29 2.6.36-rc5-git7: Reported regressions 2.6.34 -> 2.6.35 Rafael J. Wysocki
2010-09-26 20:33 ` [Bug #16228] BUG/boot failure on Dell Precision T3500 (pci/ahci_stop_engine) Rafael J. Wysocki
2010-09-27 15:45 ` Bjorn Helgaas
2010-09-27 19:40 ` Rafael J. Wysocki
2010-09-12 19:07 2.6.36-rc3-git5: Reported regressions 2.6.34 -> 2.6.35 Rafael J. Wysocki
2010-09-12 19:08 ` [Bug #16228] BUG/boot failure on Dell Precision T3500 (pci/ahci_stop_engine) Rafael J. Wysocki
2010-08-29 22:57 2.6.36-rc3: Reported regressions 2.6.34 -> 2.6.35 Rafael J. Wysocki
2010-08-29 23:13 ` [Bug #16228] BUG/boot failure on Dell Precision T3500 (pci/ahci_stop_engine) Rafael J. Wysocki
2010-08-01 13:46 2.6.35-rc6-git6: Reported regressions from 2.6.34 Rafael J. Wysocki
2010-08-01 13:52 ` [Bug #16228] BUG/boot failure on Dell Precision T3500 (pci/ahci_stop_engine) Rafael J. Wysocki
2010-08-02 0:27 ` Bjorn Helgaas
2010-07-23 11:42 2.6.35-rc6: Reported regressions from 2.6.34 Rafael J. Wysocki
2010-07-23 11:47 ` [Bug #16228] BUG/boot failure on Dell Precision T3500 (pci/ahci_stop_engine) Rafael J. Wysocki
2010-07-08 23:33 2.6.35-rc4-git3: Reported regressions from 2.6.34 Rafael J. Wysocki
2010-07-08 23:41 ` [Bug #16228] BUG/boot failure on Dell Precision T3500 (pci/ahci_stop_engine) Rafael J. Wysocki
2010-06-20 22:11 2.6.35-rc3: Reported regressions from 2.6.34 Rafael J. Wysocki
2010-06-20 22:17 ` [Bug #16228] BUG/boot failure on Dell Precision T3500 (pci/ahci_stop_engine) Rafael J. Wysocki
[not found] <bug-16228-13546@https.bugzilla.kernel.org/>
[not found] ` <201006171637.o5HGbgnO009943@demeter.kernel.org>
2010-06-17 18:40 ` [Bug 16228] " Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201009202307.09943.rjw@sisk.pl \
--to=rjw@sisk.pl \
--cc=bjorn.helgaas@hp.com \
--cc=brian.bloniarz@gmail.com \
--cc=chemobejk@gmail.com \
--cc=florian@mickler.org \
--cc=kernel-testers@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maciej.rutecki@gmail.com \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).