linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Rafael J. Wysocki" <rjw@sisk.pl>
To: Hugh Dickins <hughd@google.com>,
	Andrew Morton <akpm@linux-foundation.org>
Cc: Ondrej Zary <linux@rainbow-software.org>,
	KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>,
	KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>,
	Kernel development list <linux-kernel@vger.kernel.org>,
	Balbir Singh <balbir@in.ibm.com>
Subject: Re: 2.6.35.5: hibernation broken... AGAIN
Date: Wed, 1 Dec 2010 21:57:43 +0100	[thread overview]
Message-ID: <201012012157.43885.rjw@sisk.pl> (raw)
In-Reply-To: <alpine.LSU.2.00.1011301715480.15050@tigran.mtv.corp.google.com>

On Wednesday, December 01, 2010, Hugh Dickins wrote:
> On Wed, 1 Dec 2010, Rafael J. Wysocki wrote:
> > Below is an updated patch in which I tried to address your comments.
> > 
> > I didn't find it very useful to couple pm_restore_gfp_mask() with the thawing
> > of tasks, but nevertheless I think all of the spots where it's needed are
> > covered now.
> 
> So far as I can see, yes, they are: I'm still a bit worried about
> future changes leaving the wrong gfp mask behind by mistake;
> but I trust you more than I trust me on that, so you can add my
> Acked-by: Hugh Dickins <hughd@google.com> when it comes to
> sending in the patch.

Thanks a lot!

Andrew, are the changes in page_alloc.c fine from your standpoint?

Rafael


> > The patch has only been compile-tested for now, so caveat emptor.
> > 
> > Thanks,
> > Rafael
> > 
> > ---
> >  include/linux/gfp.h      |    4 ++--
> >  kernel/power/hibernate.c |   22 ++++++++++++----------
> >  kernel/power/suspend.c   |    5 ++---
> >  kernel/power/user.c      |    2 ++
> >  mm/page_alloc.c          |   18 +++++++++++-------
> >  5 files changed, 29 insertions(+), 22 deletions(-)
> > 
> > Index: linux-2.6/kernel/power/hibernate.c
> > ===================================================================
> > --- linux-2.6.orig/kernel/power/hibernate.c
> > +++ linux-2.6/kernel/power/hibernate.c
> > @@ -327,7 +327,6 @@ static int create_image(int platform_mod
> >  int hibernation_snapshot(int platform_mode)
> >  {
> >  	int error;
> > -	gfp_t saved_mask;
> >  
> >  	error = platform_begin(platform_mode);
> >  	if (error)
> > @@ -339,7 +338,7 @@ int hibernation_snapshot(int platform_mo
> >  		goto Close;
> >  
> >  	suspend_console();
> > -	saved_mask = clear_gfp_allowed_mask(GFP_IOFS);
> > +	pm_restrict_gfp_mask();
> >  	error = dpm_suspend_start(PMSG_FREEZE);
> >  	if (error)
> >  		goto Recover_platform;
> > @@ -348,7 +347,10 @@ int hibernation_snapshot(int platform_mo
> >  		goto Recover_platform;
> >  
> >  	error = create_image(platform_mode);
> > -	/* Control returns here after successful restore */
> > +	/*
> > +	 * Control returns here (1) after the image has been created or the
> > +	 * image creation has failed and (2) after a successful restore.
> > +	 */
> >  
> >   Resume_devices:
> >  	/* We may need to release the preallocated image pages here. */
> > @@ -357,7 +359,10 @@ int hibernation_snapshot(int platform_mo
> >  
> >  	dpm_resume_end(in_suspend ?
> >  		(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
> > -	set_gfp_allowed_mask(saved_mask);
> > +
> > +	if (error || !in_suspend)
> > +		pm_restore_gfp_mask();
> > +
> >  	resume_console();
> >   Close:
> >  	platform_end(platform_mode);
> > @@ -452,17 +457,16 @@ static int resume_target_kernel(bool pla
> >  int hibernation_restore(int platform_mode)
> >  {
> >  	int error;
> > -	gfp_t saved_mask;
> >  
> >  	pm_prepare_console();
> >  	suspend_console();
> > -	saved_mask = clear_gfp_allowed_mask(GFP_IOFS);
> > +	pm_restrict_gfp_mask();
> >  	error = dpm_suspend_start(PMSG_QUIESCE);
> >  	if (!error) {
> >  		error = resume_target_kernel(platform_mode);
> >  		dpm_resume_end(PMSG_RECOVER);
> >  	}
> > -	set_gfp_allowed_mask(saved_mask);
> > +	pm_restore_gfp_mask();
> >  	resume_console();
> >  	pm_restore_console();
> >  	return error;
> > @@ -476,7 +480,6 @@ int hibernation_restore(int platform_mod
> >  int hibernation_platform_enter(void)
> >  {
> >  	int error;
> > -	gfp_t saved_mask;
> >  
> >  	if (!hibernation_ops)
> >  		return -ENOSYS;
> > @@ -492,7 +495,6 @@ int hibernation_platform_enter(void)
> >  
> >  	entering_platform_hibernation = true;
> >  	suspend_console();
> > -	saved_mask = clear_gfp_allowed_mask(GFP_IOFS);
> >  	error = dpm_suspend_start(PMSG_HIBERNATE);
> >  	if (error) {
> >  		if (hibernation_ops->recover)
> > @@ -536,7 +538,6 @@ int hibernation_platform_enter(void)
> >   Resume_devices:
> >  	entering_platform_hibernation = false;
> >  	dpm_resume_end(PMSG_RESTORE);
> > -	set_gfp_allowed_mask(saved_mask);
> >  	resume_console();
> >  
> >   Close:
> > @@ -647,6 +648,7 @@ int hibernate(void)
> >  		if (!error)
> >  			power_down();
> >  		in_suspend = 0;
> > +		pm_restore_gfp_mask();
> >  	} else {
> >  		pr_debug("PM: Image restored successfully.\n");
> >  	}
> > Index: linux-2.6/kernel/power/user.c
> > ===================================================================
> > --- linux-2.6.orig/kernel/power/user.c
> > +++ linux-2.6/kernel/power/user.c
> > @@ -263,6 +263,7 @@ static long snapshot_ioctl(struct file *
> >  	case SNAPSHOT_UNFREEZE:
> >  		if (!data->frozen || data->ready)
> >  			break;
> > +		pm_restore_gfp_mask();
> >  		thaw_processes();
> >  		usermodehelper_enable();
> >  		data->frozen = 0;
> > @@ -275,6 +276,7 @@ static long snapshot_ioctl(struct file *
> >  			error = -EPERM;
> >  			break;
> >  		}
> > +		pm_restore_gfp_mask();
> >  		error = hibernation_snapshot(data->platform_support);
> >  		if (!error)
> >  			error = put_user(in_suspend, (int __user *)arg);
> > Index: linux-2.6/mm/page_alloc.c
> > ===================================================================
> > --- linux-2.6.orig/mm/page_alloc.c
> > +++ linux-2.6/mm/page_alloc.c
> > @@ -104,19 +104,23 @@ gfp_t gfp_allowed_mask __read_mostly = G
> >   * only be modified with pm_mutex held, unless the suspend/hibernate code is
> >   * guaranteed not to run in parallel with that modification).
> >   */
> > -void set_gfp_allowed_mask(gfp_t mask)
> > +
> > +static gfp_t saved_gfp_mask;
> > +
> > +void pm_restore_gfp_mask(void)
> >  {
> >  	WARN_ON(!mutex_is_locked(&pm_mutex));
> > -	gfp_allowed_mask = mask;
> > +	if (saved_gfp_mask) {
> > +		gfp_allowed_mask = saved_gfp_mask;
> > +		saved_gfp_mask = 0;
> > +	}
> >  }
> >  
> > -gfp_t clear_gfp_allowed_mask(gfp_t mask)
> > +void pm_restrict_gfp_mask(void)
> >  {
> > -	gfp_t ret = gfp_allowed_mask;
> > -
> >  	WARN_ON(!mutex_is_locked(&pm_mutex));
> > -	gfp_allowed_mask &= ~mask;
> > -	return ret;
> > +	saved_gfp_mask = gfp_allowed_mask;
> > +	gfp_allowed_mask &= ~GFP_IOFS;
> >  }
> >  #endif /* CONFIG_PM_SLEEP */
> >  
> > Index: linux-2.6/include/linux/gfp.h
> > ===================================================================
> > --- linux-2.6.orig/include/linux/gfp.h
> > +++ linux-2.6/include/linux/gfp.h
> > @@ -360,7 +360,7 @@ void drain_local_pages(void *dummy);
> >  
> >  extern gfp_t gfp_allowed_mask;
> >  
> > -extern void set_gfp_allowed_mask(gfp_t mask);
> > -extern gfp_t clear_gfp_allowed_mask(gfp_t mask);
> > +extern void pm_restrict_gfp_mask(void);
> > +extern void pm_restore_gfp_mask(void);
> >  
> >  #endif /* __LINUX_GFP_H */
> > Index: linux-2.6/kernel/power/suspend.c
> > ===================================================================
> > --- linux-2.6.orig/kernel/power/suspend.c
> > +++ linux-2.6/kernel/power/suspend.c
> > @@ -197,7 +197,6 @@ static int suspend_enter(suspend_state_t
> >  int suspend_devices_and_enter(suspend_state_t state)
> >  {
> >  	int error;
> > -	gfp_t saved_mask;
> >  
> >  	if (!suspend_ops)
> >  		return -ENOSYS;
> > @@ -208,7 +207,7 @@ int suspend_devices_and_enter(suspend_st
> >  			goto Close;
> >  	}
> >  	suspend_console();
> > -	saved_mask = clear_gfp_allowed_mask(GFP_IOFS);
> > +	pm_restrict_gfp_mask();
> >  	suspend_test_start();
> >  	error = dpm_suspend_start(PMSG_SUSPEND);
> >  	if (error) {
> > @@ -225,7 +224,7 @@ int suspend_devices_and_enter(suspend_st
> >  	suspend_test_start();
> >  	dpm_resume_end(PMSG_RESUME);
> >  	suspend_test_finish("resume devices");
> > -	set_gfp_allowed_mask(saved_mask);
> > +	pm_restore_gfp_mask();
> >  	resume_console();
> >   Close:
> >  	if (suspend_ops->end)
> > 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
> 
> 


  reply	other threads:[~2010-12-01 20:58 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-11-17 10:39 2.6.35.5: hibernation broken... AGAIN Ondrej Zary
2010-11-17 20:53 ` Rafael J. Wysocki
2010-11-17 21:04   ` Andrew Morton
2010-11-17 21:12     ` Rafael J. Wysocki
2010-11-17 21:18       ` Ondrej Zary
2010-11-17 23:46         ` Hugh Dickins
2010-11-20 15:07           ` Ondrej Zary
2010-11-26 11:43           ` Ondrej Zary
2010-11-26 23:10             ` Rafael J. Wysocki
2010-11-27 14:58               ` Ondrej Zary
2010-11-27 20:47                 ` Rafael J. Wysocki
2010-11-30 22:16                   ` Hugh Dickins
2010-11-30 23:07                     ` Rafael J. Wysocki
2010-12-01  0:38                       ` Rafael J. Wysocki
2010-12-01  0:53                         ` KAMEZAWA Hiroyuki
2010-12-01 21:25                           ` Rafael J. Wysocki
2010-12-01 22:23                             ` Rafael J. Wysocki
2010-12-01 23:37                               ` KAMEZAWA Hiroyuki
2010-12-02  0:00                                 ` Rafael J. Wysocki
2010-12-01  1:21                         ` Hugh Dickins
2010-12-01 20:57                           ` Rafael J. Wysocki [this message]
2010-12-06 21:09                   ` Ondrej Zary
2010-12-06 22:57                     ` Rafael J. Wysocki
2010-11-26 20:24           ` Rafael J. Wysocki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201012012157.43885.rjw@sisk.pl \
    --to=rjw@sisk.pl \
    --cc=akpm@linux-foundation.org \
    --cc=balbir@in.ibm.com \
    --cc=hughd@google.com \
    --cc=kamezawa.hiroyu@jp.fujitsu.com \
    --cc=kosaki.motohiro@jp.fujitsu.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@rainbow-software.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).