Re: TPM chip prevents machine from suspending

[Jeff Layton <jlayton@poochiereds.net>]

On Mon, 28 Mar 2011 14:12:41 -0400
Jeff Layton <jlayton@poochiereds.net> wrote:

> On Mon, 28 Mar 2011 13:25:06 -0400
> Stefan Berger <stefanb@linux.vnet.ibm.com> wrote:
> 
> > On 03/28/2011 10:08 AM, Jeff Layton wrote:
> > > My wife's machine apparently has a TPM chip in it. Since I upgraded it
> > > to Fedora 14, it fails to suspend consistently. On the first attempt to
> > > suspend it, it works fine. Once it has woken back up however, it will
> > > not suspend again. Here's the dmesg log from such an attempt:
> > >
> > > [  202.460967] PM: Syncing filesystems ... done.
> > > [  202.464818] PM: Preparing system for mem sleep
> > > [  202.485968] Freezing user space processes ... (elapsed 0.01 seconds) done.
> > > [  202.497079] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
> > > [  202.508067] PM: Entering mem sleep
> > > [  202.508086] Suspending console(s) (use no_console_suspend to debug)
> > > [  202.508451] sd 3:0:0:0: [sdb] Synchronizing SCSI cache
> > > [  202.508562] sd 2:0:0:0: [sda] Synchronizing SCSI cache
> > > [  202.508616] sd 3:0:0:0: [sdb] Stopping disk
> > > [  202.511956] parport_pc 00:0b: disabled
> > > [  202.512127] serial 00:09: disabled
> > > [  202.512134] serial 00:09: wake-up capability disabled by ACPI
> > > [  202.536058] legacy_suspend(): pnp_bus_suspend+0x0/0x82 returns 38
> > > [  202.536061] PM: Device 00:02 failed to suspend: error 38
> > > [  202.997517] sd 2:0:0:0: [sda] Stopping disk
> > > [  202.997806] PM: Some devices failed to suspend
> > > [  202.998085] sd 2:0:0:0: [sda] Starting disk
> > > [  202.998144] sd 3:0:0:0: [sdb] Starting disk
> > > [  202.998614] serial 00:09: activated
> > > [  202.999158] parport_pc 00:0b: activated
> > > [  204.543094] PM: resume of devices complete after 1545.282 msecs
> > > [  204.543268] PM: Finishing wakeup.
> > > [  204.543270] Restarting tasks ... done.
> > >
> > > ...error 38 is ENOSYS, and the 00:02 is this:
> > >
> > > # cat /sys/bus/pnp/devices/00\:02/id
> > > IFX0102
> > > PNP0c31
> > Also the tpm_tis driver handles both of these. Can you confirm which 
> > module that laptop was using  (tpm_tis or tpm_infineon) and try whether 
> > one of them works better than the other one? Please do a reboot between 
> > trying one and then the other.
> > 
> 
> It's using tpm_tis:
> 
> lrwxrwxrwx. 1 root root 0 Mar 28 13:40 /sys/bus/pnp/devices/00:02/driver -> ../../../bus/pnp/drivers/tpm_tis
> 
> FWIW, the fedora kernels have this:
> 
> CONFIG_TCG_TPM=y
> CONFIG_TCG_TIS=y
> CONFIG_TCG_NSC=m
> CONFIG_TCG_ATMEL=m
> CONFIG_TCG_INFINEON=m
> 
> When I boot, tpm_infineon is also plugged in, but I can remove that
> module and nothing seems to change (not sure what's plugging it in).
> 
> I can try using tpm_infineon, but I'm not sure how to disable tpm_tis
> with it compiled in like this -- is that possible?
> 
> > Try the following before and after a suspend/resume:
> > 
> > cd /sys
> > find . | grep caps$ | xargs cat
> > 
> > It should display manufacturer data.
> > 
> 
> There's only one "caps" file. Here's the before (after a fresh reboot):
> 
> # cat ./devices/pnp0/00:02/caps
> Manufacturer: 0x49465800
> TCG version: 1.2
> Firmware version: 1.0
> 
> ...after a successful suspend/resume cycle:
> 
> # cat ./devices/pnp0/00:02/caps
> 
> ...it gives no output at all. Guess that lends some weight to the
> theory of it not being reset properly on resume?
> 
> Thanks for the help so far...

FWIW, I turned up dynamic debugging on the tpm files and got this in
the ring buffer when I tried to read from "caps":

[ 6880.495071] tpm_tis 00:02: A TPM error (38) occurred attempting to determine the manufacturer

I don't see any obvious places that return ENOSYS in the tpm code, so
I'm not clear on where that's coming from...

-- 
Jeff Layton <jlayton@poochiereds.net>