[PATCH 0/5 v2] [GIT PULL] x86/jump label: Paranoid checks and 2 or 5 byte nops

linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

* [PATCH 0/5 v2] [GIT PULL] x86/jump label: Paranoid checks and 2 or 5 byte nops
@ 2012-01-28 16:09 Steven Rostedt
  2012-01-28 16:09 ` [PATCH 1/5 v2] x86/jump-label: Use best default nops for inital jump label calls Steven Rostedt
                   ` (5 more replies)
  0 siblings, 6 replies; 22+ messages in thread
From: Steven Rostedt @ 2012-01-28 16:09 UTC (permalink / raw)
  To: linux-kernel
  Cc: Ingo Molnar, Andrew Morton, Jason Baron, H. Peter Anvin,
	Frederic Weisbecker

[-- Attachment #1: Type: text/plain, Size: 1741 bytes --]


Ingo,

This is the second round with the suggestions made by Peter and Andrew
incorporated (and tested).

We can still let this code sit on LKML for a little bit, to give time
for anyone else that wants to complain about them ;-)

Changes for v2:
	Used GENERIC_NOP5_ATOMIC instead of open coding the nop.
	 (suggested by H. Peter Anvin)

	I also added a comment to the code that explains that the
	JUMP_LABEL_INIT_NOP must match the update_jump_label.c code.

	Used const pointers for default_nop and short_nop.
	 (suggested by Andrew Morton)

Please pull (again, if everyone is OK with them) the latest
 tip/perf/jump-label-2 tree, which can be found at:

  git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace.git
tip/perf/jump-label-2

Head SHA1: 78498e6a36ca3d192ee6a151d8c081525e6c9abe


Steven Rostedt (5):
      x86/jump-label: Use best default nops for inital jump label calls
      x86/jump-label: Do not bother updating nops if they are correct
      x86/jump-label: Add safety checks to jump label conversions
      jump labels: Add infrastructure to update jump labels at compile time
      x86/jump labels: Use etiher 5 byte or 2 byte jumps

----
 Makefile                          |    7 +
 arch/Kconfig                      |    6 +
 arch/x86/Kconfig                  |    1 +
 arch/x86/include/asm/jump_label.h |   14 ++-
 arch/x86/kernel/jump_label.c      |  109 +++++++++++-
 scripts/Makefile                  |    1 +
 scripts/Makefile.build            |   15 ++-
 scripts/update_jump_label.c       |  341 +++++++++++++++++++++++++++++++++++++
 scripts/update_jump_label.h       |  208 ++++++++++++++++++++++
 9 files changed, 688 insertions(+), 14 deletions(-)

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

^ permalink raw reply	[flat|nested] 22+ messages in thread

* [PATCH 1/5 v2] x86/jump-label: Use best default nops for inital jump label calls
  2012-01-28 16:09 [PATCH 0/5 v2] [GIT PULL] x86/jump label: Paranoid checks and 2 or 5 byte nops Steven Rostedt
@ 2012-01-28 16:09 ` Steven Rostedt
  2012-01-28 16:09 ` [PATCH 2/5 v2] x86/jump-label: Do not bother updating nops if they are correct Steven Rostedt
                   ` (4 subsequent siblings)
  5 siblings, 0 replies; 22+ messages in thread
From: Steven Rostedt @ 2012-01-28 16:09 UTC (permalink / raw)
  To: linux-kernel
  Cc: Ingo Molnar, Andrew Morton, Jason Baron, H. Peter Anvin,
	Frederic Weisbecker, H. Peter Anvin

[-- Attachment #1: Type: text/plain, Size: 1615 bytes --]

From: Steven Rostedt <srostedt@redhat.com>

As specified by H. Peter Anvin, the best nops for x86 without knowing
the running computer is:

32bit:
  0x3e, 0x8d, 0x74, 0x26, 0x00 also known as GENERIC_NOP5_ATOMIC

64bit:
  0x0f, 0x1f, 0x44, 0x00, 0x00  also known as P6_NOP5_ATOMIC

Currently the default nop that is used by jump label is:

 0xe9 0x00 0x00 0x00 0x00

Which is really a 5byte jump to the next position.

It's better to use a real nop than a jmp.

Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Jason Baron <jbaron@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
---
 arch/x86/include/asm/jump_label.h |    9 +++++++--
 1 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/arch/x86/include/asm/jump_label.h b/arch/x86/include/asm/jump_label.h
index a32b18c..7082743 100644
--- a/arch/x86/include/asm/jump_label.h
+++ b/arch/x86/include/asm/jump_label.h
@@ -3,18 +3,23 @@
 
 #ifdef __KERNEL__
 
+#include <linux/stringify.h>
 #include <linux/types.h>
 #include <asm/nops.h>
 #include <asm/asm.h>
 
 #define JUMP_LABEL_NOP_SIZE 5
 
-#define JUMP_LABEL_INITIAL_NOP ".byte 0xe9 \n\t .long 0\n\t"
+#ifdef CONFIG_X86_64
+# define JUMP_LABEL_INIT_NOP P6_NOP5_ATOMIC
+#else
+# define JUMP_LABEL_INIT_NOP GENERIC_NOP5_ATOMIC
+#endif
 
 static __always_inline bool arch_static_branch(struct jump_label_key *key)
 {
 	asm goto("1:"
-		JUMP_LABEL_INITIAL_NOP
+		".byte " __stringify(JUMP_LABEL_INIT_NOP) "\n\t"
 		".pushsection __jump_table,  \"aw\" \n\t"
 		_ASM_ALIGN "\n\t"
 		_ASM_PTR "1b, %l[l_yes], %c0 \n\t"
-- 
1.7.8.3



[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

^ permalink raw reply related	[flat|nested] 22+ messages in thread

* [PATCH 2/5 v2] x86/jump-label: Do not bother updating nops if they are correct
  2012-01-28 16:09 [PATCH 0/5 v2] [GIT PULL] x86/jump label: Paranoid checks and 2 or 5 byte nops Steven Rostedt
  2012-01-28 16:09 ` [PATCH 1/5 v2] x86/jump-label: Use best default nops for inital jump label calls Steven Rostedt
@ 2012-01-28 16:09 ` Steven Rostedt
  2012-01-28 16:09 ` [PATCH 3/5 v2] x86/jump-label: Add safety checks to jump label conversions Steven Rostedt
                   ` (3 subsequent siblings)
  5 siblings, 0 replies; 22+ messages in thread
From: Steven Rostedt @ 2012-01-28 16:09 UTC (permalink / raw)
  To: linux-kernel
  Cc: Ingo Molnar, Andrew Morton, Jason Baron, H. Peter Anvin,
	Frederic Weisbecker

[-- Attachment #1: Type: text/plain, Size: 1627 bytes --]

From: Steven Rostedt <srostedt@redhat.com>

On boot up, the jump label init function scans all the jump label locations
and converts them to the best nop for the machine. If the nop is already
the ideal nop, do not bother with changing it.

Cc: Jason Baron <jbaron@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
---
 arch/x86/kernel/jump_label.c |   20 +++++++++++++++++++-
 1 files changed, 19 insertions(+), 1 deletions(-)

diff --git a/arch/x86/kernel/jump_label.c b/arch/x86/kernel/jump_label.c
index ea9d5f2f..cd42721 100644
--- a/arch/x86/kernel/jump_label.c
+++ b/arch/x86/kernel/jump_label.c
@@ -53,7 +53,25 @@ void arch_jump_label_transform(struct jump_entry *entry,
 void arch_jump_label_transform_static(struct jump_entry *entry,
 				      enum jump_label_type type)
 {
-	__jump_label_transform(entry, type, text_poke_early);
+	static int once;
+	static int update;
+
+	/*
+	 * This function is called at boot up and when modules are
+	 * first loaded. Check if the default nop, the one that is
+	 * inserted at compile time, is the ideal nop. If it is, then
+	 * we do not need to update the nop, and we can leave it as is.
+	 * If it is not, then we need to update the nop to the ideal nop.
+	 */
+	if (!once) {
+		const unsigned char default_nop[] = { JUMP_LABEL_INIT_NOP };
+		const unsigned char *ideal_nop = ideal_nops[NOP_ATOMIC5];
+		once++;
+		if (memcmp(ideal_nop, default_nop, 5) != 0)
+			update = 1;
+	}
+	if (update)
+		__jump_label_transform(entry, type, text_poke_early);
 }
 
 #endif
-- 
1.7.8.3



[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

^ permalink raw reply related	[flat|nested] 22+ messages in thread

* [PATCH 3/5 v2] x86/jump-label: Add safety checks to jump label conversions
  2012-01-28 16:09 [PATCH 0/5 v2] [GIT PULL] x86/jump label: Paranoid checks and 2 or 5 byte nops Steven Rostedt
  2012-01-28 16:09 ` [PATCH 1/5 v2] x86/jump-label: Use best default nops for inital jump label calls Steven Rostedt
  2012-01-28 16:09 ` [PATCH 2/5 v2] x86/jump-label: Do not bother updating nops if they are correct Steven Rostedt
@ 2012-01-28 16:09 ` Steven Rostedt
  2012-01-28 16:09 ` [PATCH 4/5 v2] jump labels: Add infrastructure to update jump labels at compile time Steven Rostedt
                   ` (2 subsequent siblings)
  5 siblings, 0 replies; 22+ messages in thread
From: Steven Rostedt @ 2012-01-28 16:09 UTC (permalink / raw)
  To: linux-kernel
  Cc: Ingo Molnar, Andrew Morton, Jason Baron, H. Peter Anvin,
	Frederic Weisbecker

[-- Attachment #1: Type: text/plain, Size: 2709 bytes --]

From: Steven Rostedt <srostedt@redhat.com>

As with all modifying of kernel text, we need to be very paranoid.

When converting the jump label locations to and from nops to jumps
a check has been added to make sure what we are replacing is what we
expect, otherwise we bug.

Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jason Baron <jbaron@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
---
 arch/x86/kernel/jump_label.c |   32 ++++++++++++++++++++++++++++----
 1 files changed, 28 insertions(+), 4 deletions(-)

diff --git a/arch/x86/kernel/jump_label.c b/arch/x86/kernel/jump_label.c
index cd42721..12a8812 100644
--- a/arch/x86/kernel/jump_label.c
+++ b/arch/x86/kernel/jump_label.c
@@ -26,16 +26,40 @@ union jump_code_union {
 
 static void __jump_label_transform(struct jump_entry *entry,
 				   enum jump_label_type type,
-				   void *(*poker)(void *, const void *, size_t))
+				   void *(*poker)(void *, const void *, size_t),
+				   int init)
 {
 	union jump_code_union code;
+	const unsigned char *ideal_nop = ideal_nops[NOP_ATOMIC5];
 
 	if (type == JUMP_LABEL_ENABLE) {
+		/*
+		 * We are enabling this jump label. If it is not a nop
+		 * then something must have gone wrong.
+		 */
+		BUG_ON(memcmp((void *)entry->code, ideal_nop, 5) != 0);
+
 		code.jump = 0xe9;
 		code.offset = entry->target -
 				(entry->code + JUMP_LABEL_NOP_SIZE);
-	} else
+	} else {
+		/*
+		 * We are disabling this jump label. If it is not what
+		 * we think it is, then something must have gone wrong.
+		 * If this is the first initialization call, then we
+		 * are converting the default nop to the ideal nop.
+		 */
+		if (init) {
+			const unsigned char default_nop[] = { JUMP_LABEL_INIT_NOP };
+			BUG_ON(memcmp((void *)entry->code, default_nop, 5) != 0);
+		} else {
+			code.jump = 0xe9;
+			code.offset = entry->target -
+				(entry->code + JUMP_LABEL_NOP_SIZE);
+			BUG_ON(memcmp((void *)entry->code, &code, 5) != 0);
+		}
 		memcpy(&code, ideal_nops[NOP_ATOMIC5], JUMP_LABEL_NOP_SIZE);
+	}
 
 	(*poker)((void *)entry->code, &code, JUMP_LABEL_NOP_SIZE);
 }
@@ -45,7 +69,7 @@ void arch_jump_label_transform(struct jump_entry *entry,
 {
 	get_online_cpus();
 	mutex_lock(&text_mutex);
-	__jump_label_transform(entry, type, text_poke_smp);
+	__jump_label_transform(entry, type, text_poke_smp, 0);
 	mutex_unlock(&text_mutex);
 	put_online_cpus();
 }
@@ -71,7 +95,7 @@ void arch_jump_label_transform_static(struct jump_entry *entry,
 			update = 1;
 	}
 	if (update)
-		__jump_label_transform(entry, type, text_poke_early);
+		__jump_label_transform(entry, type, text_poke_early, 1);
 }
 
 #endif
-- 
1.7.8.3



[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

^ permalink raw reply related	[flat|nested] 22+ messages in thread

* [PATCH 4/5 v2] jump labels: Add infrastructure to update jump labels at compile time
  2012-01-28 16:09 [PATCH 0/5 v2] [GIT PULL] x86/jump label: Paranoid checks and 2 or 5 byte nops Steven Rostedt
                   ` (2 preceding siblings ...)
  2012-01-28 16:09 ` [PATCH 3/5 v2] x86/jump-label: Add safety checks to jump label conversions Steven Rostedt
@ 2012-01-28 16:09 ` Steven Rostedt
  2012-01-28 16:09 ` [PATCH 5/5 v2] x86/jump labels: Use etiher 5 byte or 2 byte jumps Steven Rostedt
  2012-01-30 14:48 ` [PATCH 0/5 v2] [GIT PULL] x86/jump label: Paranoid checks and 2 or 5 byte nops Ingo Molnar
  5 siblings, 0 replies; 22+ messages in thread
From: Steven Rostedt @ 2012-01-28 16:09 UTC (permalink / raw)
  To: linux-kernel
  Cc: Ingo Molnar, Andrew Morton, Jason Baron, H. Peter Anvin,
	Frederic Weisbecker

[-- Attachment #1: Type: text/plain, Size: 19290 bytes --]

From: Steven Rostedt <srostedt@redhat.com>

Add the infrastructure to allow architectures to modify the jump label
locations at compile time. This is mainly for x86, where the jmps may
be either 2 bytes or 5 bytes. Instead of wasting 5 bytes for all jump labels,
this code will let x86 put in a jmp instead of a 5 byte nop. Then the
assembler will make either a 2 byte or 5 byte jmp depending on where
the target is.

At compile time, this code will replace the jmps with either a 2 byte
or 5 byte nop depending on the size of the jmp that was added.

Cc: Jason Baron <jbaron@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
---
 Makefile                    |    7 +
 arch/Kconfig                |    6 +
 scripts/Makefile            |    1 +
 scripts/Makefile.build      |   15 ++-
 scripts/update_jump_label.c |  341 +++++++++++++++++++++++++++++++++++++++++++
 scripts/update_jump_label.h |  208 ++++++++++++++++++++++++++
 6 files changed, 576 insertions(+), 2 deletions(-)
 create mode 100644 scripts/update_jump_label.c
 create mode 100644 scripts/update_jump_label.h

diff --git a/Makefile b/Makefile
index adddd11..2b3fdf3 100644
--- a/Makefile
+++ b/Makefile
@@ -611,6 +611,13 @@ ifdef CONFIG_DYNAMIC_FTRACE
 endif
 endif
 
+ifdef CONFIG_JUMP_LABEL
+	ifdef CONFIG_HAVE_BUILD_TIME_JUMP_LABEL
+		BUILD_UPDATE_JUMP_LABEL := y
+		export BUILD_UPDATE_JUMP_LABEL
+	endif
+endif
+
 # We trigger additional mismatches with less inlining
 ifdef CONFIG_DEBUG_SECTION_MISMATCH
 KBUILD_CFLAGS += $(call cc-option, -fno-inline-functions-called-once)
diff --git a/arch/Kconfig b/arch/Kconfig
index 4b0669c..8fa6934 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -169,6 +169,12 @@ config HAVE_PERF_EVENTS_NMI
 	  subsystem.  Also has support for calculating CPU cycle events
 	  to determine how many clock cycles in a given period.
 
+config HAVE_BUILD_TIME_JUMP_LABEL
+       bool
+       help
+	If an arch uses scripts/update_jump_label to patch in jump nops
+	at build time, then it must enable this option.
+
 config HAVE_ARCH_JUMP_LABEL
 	bool
 
diff --git a/scripts/Makefile b/scripts/Makefile
index df7678f..738b65c 100644
--- a/scripts/Makefile
+++ b/scripts/Makefile
@@ -13,6 +13,7 @@ hostprogs-$(CONFIG_LOGO)         += pnmtologo
 hostprogs-$(CONFIG_VT)           += conmakehash
 hostprogs-$(CONFIG_IKCONFIG)     += bin2c
 hostprogs-$(BUILD_C_RECORDMCOUNT) += recordmcount
+hostprogs-$(BUILD_UPDATE_JUMP_LABEL) += update_jump_label
 
 always		:= $(hostprogs-y) $(hostprogs-m)
 
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index d2b366c..8a84b80 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -258,6 +258,15 @@ cmd_modversions =								\
 	fi;
 endif
 
+ifdef BUILD_UPDATE_JUMP_LABEL
+update_jump_label_source := $(srctree)/scripts/update_jump_label.c \
+			$(srctree)/scripts/update_jump_label.h
+cmd_update_jump_label =						\
+	if [ $(@) != "scripts/mod/empty.o" ]; then		\
+		$(objtree)/scripts/update_jump_label "$(@)";	\
+	fi;
+endif
+
 ifdef CONFIG_FTRACE_MCOUNT_RECORD
 ifdef BUILD_C_RECORDMCOUNT
 ifeq ("$(origin RECORDMCOUNT_WARN)", "command line")
@@ -294,6 +303,7 @@ define rule_cc_o_c
 	$(cmd_modversions)						  \
 	$(call echo-cmd,record_mcount)					  \
 	$(cmd_record_mcount)						  \
+	$(cmd_update_jump_label)					  \
 	scripts/basic/fixdep $(depfile) $@ '$(call make-cmd,cc_o_c)' >    \
 	                                              $(dot-target).tmp;  \
 	rm -f $(depfile);						  \
@@ -301,13 +311,14 @@ define rule_cc_o_c
 endef
 
 # Built-in and composite module parts
-$(obj)/%.o: $(src)/%.c $(recordmcount_source) FORCE
+$(obj)/%.o: $(src)/%.c $(recordmcount_source) $(update_jump_label_source) FORCE
 	$(call cmd,force_checksrc)
 	$(call if_changed_rule,cc_o_c)
 
 # Single-part modules are special since we need to mark them in $(MODVERDIR)
 
-$(single-used-m): $(obj)/%.o: $(src)/%.c $(recordmcount_source) FORCE
+$(single-used-m): $(obj)/%.o: $(src)/%.c $(recordmcount_source) \
+		  $(update_jump_label_source) FORCE
 	$(call cmd,force_checksrc)
 	$(call if_changed_rule,cc_o_c)
 	@{ echo $(@:.o=.ko); echo $@; } > $(MODVERDIR)/$(@F:.o=.mod)
diff --git a/scripts/update_jump_label.c b/scripts/update_jump_label.c
new file mode 100644
index 0000000..36d4b43
--- /dev/null
+++ b/scripts/update_jump_label.c
@@ -0,0 +1,341 @@
+/*
+ * update_jump_label.c: replace jmps with nops at compile time.
+ * Copyright 2010 Steven Rostedt <srostedt@redhat.com>, Red Hat Inc.
+ *  Parsing of the elf file was influenced by recordmcount.c
+ *  originally written by and copyright to John F. Reiser <jreiser@BitWagon.com>.
+ */
+
+/*
+ * Note, this code is originally designed for x86, but may be used by
+ * other archs to do the nop updates at compile time instead of at boot time.
+ * X86 uses this as an optimization, as jmps can be either 2 bytes or 5 bytes.
+ * Inserting a 2 byte where possible helps with both CPU performance and
+ * icache strain.
+ */
+#include <sys/types.h>
+#include <sys/mman.h>
+#include <sys/stat.h>
+#include <getopt.h>
+#include <elf.h>
+#include <fcntl.h>
+#include <setjmp.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <unistd.h>
+
+static int fd_map;	/* File descriptor for file being modified. */
+static struct stat sb;	/* Remember .st_size, etc. */
+static int mmap_failed; /* Boolean flag. */
+
+static void die(const char *err, const char *fmt, ...)
+{
+	va_list ap;
+
+	if (err)
+		perror(err);
+
+	if (fmt) {
+		va_start(ap, fmt);
+		fprintf(stderr, "Fatal error:  ");
+		vfprintf(stderr, fmt, ap);
+		fprintf(stderr, "\n");
+		va_end(ap);
+	}
+
+	exit(1);
+}
+
+static void usage(char **argv)
+{
+	char *arg = argv[0];
+	char *p = arg + strlen(arg);
+
+	while (p >= arg && *p != '/')
+		p--;
+	p++;
+
+	printf("usage: %s file\n"
+	       "\n", p);
+	exit(-1);
+}
+
+/* w8rev, w8nat, ...: Handle endianness. */
+
+static uint64_t w8rev(uint64_t const x)
+{
+	return   ((0xff & (x >> (0 * 8))) << (7 * 8))
+	       | ((0xff & (x >> (1 * 8))) << (6 * 8))
+	       | ((0xff & (x >> (2 * 8))) << (5 * 8))
+	       | ((0xff & (x >> (3 * 8))) << (4 * 8))
+	       | ((0xff & (x >> (4 * 8))) << (3 * 8))
+	       | ((0xff & (x >> (5 * 8))) << (2 * 8))
+	       | ((0xff & (x >> (6 * 8))) << (1 * 8))
+	       | ((0xff & (x >> (7 * 8))) << (0 * 8));
+}
+
+static uint32_t w4rev(uint32_t const x)
+{
+	return   ((0xff & (x >> (0 * 8))) << (3 * 8))
+	       | ((0xff & (x >> (1 * 8))) << (2 * 8))
+	       | ((0xff & (x >> (2 * 8))) << (1 * 8))
+	       | ((0xff & (x >> (3 * 8))) << (0 * 8));
+}
+
+static uint32_t w2rev(uint16_t const x)
+{
+	return   ((0xff & (x >> (0 * 8))) << (1 * 8))
+	       | ((0xff & (x >> (1 * 8))) << (0 * 8));
+}
+
+static uint64_t w8nat(uint64_t const x)
+{
+	return x;
+}
+
+static uint32_t w4nat(uint32_t const x)
+{
+	return x;
+}
+
+static uint32_t w2nat(uint16_t const x)
+{
+	return x;
+}
+
+static uint64_t (*w8)(uint64_t);
+static uint32_t (*w)(uint32_t);
+static uint32_t (*w2)(uint16_t);
+
+/* ulseek, uread, ...:  Check return value for errors. */
+
+static off_t
+ulseek(int const fd, off_t const offset, int const whence)
+{
+	off_t const w = lseek(fd, offset, whence);
+	if (w == (off_t)-1)
+		die("lseek", NULL);
+
+	return w;
+}
+
+static size_t
+uread(int const fd, void *const buf, size_t const count)
+{
+	size_t const n = read(fd, buf, count);
+	if (n != count)
+		die("read", NULL);
+
+	return n;
+}
+
+static size_t
+uwrite(int const fd, void const *const buf, size_t const count)
+{
+	size_t const n = write(fd, buf, count);
+	if (n != count)
+		die("write", NULL);
+
+	return n;
+}
+
+static void *
+umalloc(size_t size)
+{
+	void *const addr = malloc(size);
+	if (addr == 0)
+		die("malloc", "malloc failed: %zu bytes\n", size);
+
+	return addr;
+}
+
+/*
+ * Get the whole file as a programming convenience in order to avoid
+ * malloc+lseek+read+free of many pieces.  If successful, then mmap
+ * avoids copying unused pieces; else just read the whole file.
+ * Open for both read and write; new info will be appended to the file.
+ * Use MAP_PRIVATE so that a few changes to the in-memory ElfXX_Ehdr
+ * do not propagate to the file until an explicit overwrite at the last.
+ * This preserves most aspects of consistency (all except .st_size)
+ * for simultaneous readers of the file while we are appending to it.
+ * However, multiple writers still are bad.  We choose not to use
+ * locking because it is expensive and the use case of kernel build
+ * makes multiple writers unlikely.
+ */
+static void *mmap_file(char const *fname)
+{
+	void *addr;
+
+	fd_map = open(fname, O_RDWR);
+	if (fd_map < 0 || fstat(fd_map, &sb) < 0)
+		die(fname, "failed to open file");
+
+	if (!S_ISREG(sb.st_mode))
+		die(NULL, "not a regular file: %s\n", fname);
+
+	addr = mmap(0, sb.st_size, PROT_READ|PROT_WRITE, MAP_PRIVATE,
+		    fd_map, 0);
+
+	mmap_failed = 0;
+	if (addr == MAP_FAILED) {
+		mmap_failed = 1;
+		addr = umalloc(sb.st_size);
+		uread(fd_map, addr, sb.st_size);
+	}
+	return addr;
+}
+
+static void munmap_file(void *addr)
+{
+	if (!mmap_failed)
+		munmap(addr, sb.st_size);
+	else
+		free(addr);
+	close(fd_map);
+}
+
+/* P6_NOP5_ATOMIC */
+static unsigned char ideal_nop5_x86_64[5] = { 0x0f, 0x1f, 0x44, 0x00, 0x00 };
+
+/* GENERIC_NOP5_ATOMIC */
+static unsigned char ideal_nop5_x86_32[5] = { 0x3e, 0x8d, 0x74, 0x26, 0x00 };
+
+/* P6_NOP2 */
+static unsigned char ideal_nop2_x86[2] = { 0x66, 0x90 };
+
+static unsigned char *ideal_nop;
+
+static int (*make_nop)(void *map, size_t const offset);
+
+static int make_nop_x86(void *map, size_t const offset)
+{
+	unsigned char *op;
+	unsigned char *nop;
+	int size;
+
+	/* Determine which type of jmp this is 2 byte or 5. */
+	op = map + offset;
+	switch (*op) {
+	case 0xeb: /* 2 byte */
+		size = 2;
+		nop = ideal_nop2_x86;
+		break;
+	case 0xe9: /* 5 byte */
+		size = 5;
+		nop = ideal_nop;
+		break;
+	default:
+		die(NULL, "Bad jump label section (bad op %x)\n", *op);
+		__builtin_unreachable();
+	}
+
+	/* convert to nop */
+	ulseek(fd_map, offset, SEEK_SET);
+	uwrite(fd_map, nop, size);
+	return 0;
+}
+
+/* 32 bit and 64 bit are very similar */
+#include "update_jump_label.h"
+#define UPDATE_JUMP_LABEL_64
+#include "update_jump_label.h"
+
+static int do_file(const char *fname)
+{
+	Elf32_Ehdr *const ehdr = mmap_file(fname);
+	unsigned int reltype = 0;
+
+	w = w4nat;
+	w2 = w2nat;
+	w8 = w8nat;
+	switch (ehdr->e_ident[EI_DATA]) {
+		static unsigned int const endian = 1;
+	default:
+		die(NULL, "unrecognized ELF data encoding %d: %s\n",
+			ehdr->e_ident[EI_DATA], fname);
+		break;
+	case ELFDATA2LSB:
+		if (*(unsigned char const *)&endian != 1) {
+			/* main() is big endian, file.o is little endian. */
+			w = w4rev;
+			w2 = w2rev;
+			w8 = w8rev;
+		}
+		break;
+	case ELFDATA2MSB:
+		if (*(unsigned char const *)&endian != 0) {
+			/* main() is little endian, file.o is big endian. */
+			w = w4rev;
+			w2 = w2rev;
+			w8 = w8rev;
+		}
+		break;
+	}  /* end switch */
+
+	if (memcmp(ELFMAG, ehdr->e_ident, SELFMAG) != 0 ||
+	    w2(ehdr->e_type) != ET_REL ||
+	    ehdr->e_ident[EI_VERSION] != EV_CURRENT)
+		die(NULL, "unrecognized ET_REL file %s\n", fname);
+
+	switch (w2(ehdr->e_machine)) {
+	default:
+		die(NULL, "unrecognized e_machine %d %s\n",
+		    w2(ehdr->e_machine), fname);
+		break;
+	case EM_386:
+		reltype = R_386_32;
+		make_nop = make_nop_x86;
+		ideal_nop = ideal_nop5_x86_32;
+		break;
+	case EM_ARM:	 reltype = R_ARM_ABS32;
+			 break;
+	case EM_IA_64:	 reltype = R_IA64_IMM64; break;
+	case EM_MIPS:	 /* reltype: e_class    */ break;
+	case EM_PPC:	 reltype = R_PPC_ADDR32;   break;
+	case EM_PPC64:	 reltype = R_PPC64_ADDR64; break;
+	case EM_S390:    /* reltype: e_class    */ break;
+	case EM_SH:	 reltype = R_SH_DIR32;                 break;
+	case EM_SPARCV9: reltype = R_SPARC_64;     break;
+	case EM_X86_64:
+		make_nop = make_nop_x86;
+		ideal_nop = ideal_nop5_x86_64;
+		reltype = R_X86_64_64;
+		break;
+	}  /* end switch */
+
+	switch (ehdr->e_ident[EI_CLASS]) {
+	default:
+		die(NULL, "unrecognized ELF class %d %s\n",
+		    ehdr->e_ident[EI_CLASS], fname);
+		break;
+	case ELFCLASS32:
+		if (w2(ehdr->e_ehsize) != sizeof(Elf32_Ehdr)
+		||  w2(ehdr->e_shentsize) != sizeof(Elf32_Shdr))
+			die(NULL, "unrecognized ET_REL file: %s\n", fname);
+
+		do_func32(ehdr, fname, reltype);
+		break;
+	case ELFCLASS64: {
+		Elf64_Ehdr *const ghdr = (Elf64_Ehdr *)ehdr;
+		if (w2(ghdr->e_ehsize) != sizeof(Elf64_Ehdr)
+		||  w2(ghdr->e_shentsize) != sizeof(Elf64_Shdr))
+			die(NULL, "unrecognized ET_REL file: %s\n", fname);
+
+		do_func64(ghdr, fname, reltype);
+		break;
+	}
+	}  /* end switch */
+
+	munmap_file(ehdr);
+	return 0;
+}
+
+int main(int argc, char **argv)
+{
+	if (argc != 2)
+		usage(argv);
+
+	return do_file(argv[1]);
+}
+
diff --git a/scripts/update_jump_label.h b/scripts/update_jump_label.h
new file mode 100644
index 0000000..181bd5b
--- /dev/null
+++ b/scripts/update_jump_label.h
@@ -0,0 +1,208 @@
+/*
+ * update_jump_label.h
+ *
+ * This code was based off of code from recordmcount.c written by
+ * Copyright 2009 John F. Reiser <jreiser@BitWagon.com>.  All rights reserved.
+ *
+ * The original code had the same algorithms for both 32bit
+ * and 64bit ELF files, but the code was duplicated to support
+ * the difference in structures that were used. This
+ * file creates a macro of everything that is different between
+ * the 64 and 32 bit code, such that by including this header
+ * twice we can create both sets of functions by including this
+ * header once with UPDATE_JUMP_LABEL_64 undefined, and again with
+ * it defined.
+ *
+ * Copyright 2010 Steven Rostedt <srostedt@redhat.com>, Red Hat Inc.
+ *
+ * Licensed under the GNU General Public License, version 2 (GPLv2).
+ */
+
+#undef EBITS
+#undef _w
+
+#ifdef UPDATE_JUMP_LABEL_64
+# define EBITS			64
+# define _w			w8
+#else
+# define EBITS			32
+# define _w			w
+#endif
+
+#define _FBITS(x, e)	x##e
+#define FBITS(x, e)	_FBITS(x, e)
+#define FUNC(x)		FBITS(x, EBITS)
+
+#undef Elf_Ehdr
+#undef Elf_Shdr
+#undef Elf_Rel
+#undef Elf_Rela
+#undef Elf_Sym
+#undef ELF_R_SYM
+#undef ELF_R_TYPE
+
+#define __ATTACH(x, y, z)	x##y##z
+#define ATTACH(x, y, z)		__ATTACH(x, y, z)
+
+#define Elf_Ehdr	ATTACH(Elf, EBITS, _Ehdr)
+#define Elf_Shdr	ATTACH(Elf, EBITS, _Shdr)
+#define Elf_Rel		ATTACH(Elf, EBITS, _Rel)
+#define Elf_Rela	ATTACH(Elf, EBITS, _Rela)
+#define Elf_Sym		ATTACH(Elf, EBITS, _Sym)
+#define uint_t		ATTACH(uint, EBITS, _t)
+#define ELF_R_SYM	ATTACH(ELF, EBITS, _R_SYM)
+#define ELF_R_TYPE	ATTACH(ELF, EBITS, _R_TYPE)
+
+#undef get_shdr
+#define get_shdr(ehdr) ((Elf_Shdr *)(_w((ehdr)->e_shoff) + (void *)(ehdr)))
+
+#undef get_section_loc
+#define get_section_loc(ehdr, shdr)(_w((shdr)->sh_offset) + (void *)(ehdr))
+
+/* Find relocation section hdr for a given section */
+static const Elf_Shdr *
+FUNC(find_relhdr)(const Elf_Ehdr *ehdr, const Elf_Shdr *shdr)
+{
+	const Elf_Shdr *shdr0 = get_shdr(ehdr);
+	int nhdr = w2(ehdr->e_shnum);
+	const Elf_Shdr *hdr;
+	int i;
+
+	for (hdr = shdr0, i = 0; i < nhdr; hdr = &shdr0[++i]) {
+		if (w(hdr->sh_type) != SHT_REL &&
+		    w(hdr->sh_type) != SHT_RELA)
+			continue;
+
+		/*
+		 * The relocation section's info field holds
+		 * the section index that it represents.
+		 */
+		if (shdr == &shdr0[w(hdr->sh_info)])
+			return hdr;
+	}
+	return NULL;
+}
+
+/* Find a section headr based on name and type */
+static const Elf_Shdr *
+FUNC(find_shdr)(const Elf_Ehdr *ehdr, const char *name, uint_t type)
+{
+	const Elf_Shdr *shdr0 = get_shdr(ehdr);
+	const Elf_Shdr *shstr = &shdr0[w2(ehdr->e_shstrndx)];
+	const char *shstrtab = (char *)get_section_loc(ehdr, shstr);
+	int nhdr = w2(ehdr->e_shnum);
+	const Elf_Shdr *hdr;
+	const char *hdrname;
+	int i;
+
+	for (hdr = shdr0, i = 0; i < nhdr; hdr = &shdr0[++i]) {
+		if (w(hdr->sh_type) != type)
+			continue;
+
+		/* If we are just looking for a section by type (ie. SYMTAB) */
+		if (!name)
+			return hdr;
+
+		hdrname = &shstrtab[w(hdr->sh_name)];
+		if (strcmp(hdrname, name) == 0)
+			return hdr;
+	}
+	return NULL;
+}
+
+static void
+FUNC(section_update)(const Elf_Ehdr *ehdr, const Elf_Shdr *symhdr,
+		     unsigned shtype, const Elf_Rel *rel, void *data)
+{
+	const Elf_Shdr *shdr0 = get_shdr(ehdr);
+	const Elf_Shdr *targethdr;
+	const Elf_Rela *rela;
+	const Elf_Sym *syment;
+	uint_t offset = _w(rel->r_offset);
+	uint_t info = _w(rel->r_info);
+	uint_t sym = ELF_R_SYM(info);
+	uint_t type = ELF_R_TYPE(info);
+	uint_t addend;
+	uint_t targetloc;
+
+	if (shtype == SHT_RELA) {
+		rela = (const Elf_Rela *)rel;
+		addend = _w(rela->r_addend);
+	} else
+		addend = _w(*(int *)(data + offset));
+
+	syment = (const Elf_Sym *)get_section_loc(ehdr, symhdr);
+	targethdr = &shdr0[w2(syment[sym].st_shndx)];
+	targetloc = _w(targethdr->sh_offset);
+
+	/* TODO, need a separate function for all archs */
+	if (type != R_386_32)
+		die(NULL, "Arch relocation type %d not supported", type);
+
+	targetloc += addend;
+
+	*(uint_t *)(data + offset) = targetloc;
+}
+
+/* Overall supervision for Elf32 ET_REL file. */
+static void
+FUNC(do_func)(Elf_Ehdr *ehdr, char const *const fname, unsigned const reltype)
+{
+	const Elf_Shdr *jlshdr;
+	const Elf_Shdr *jlrhdr;
+	const Elf_Shdr *symhdr;
+	const Elf_Rel *rel;
+	unsigned size;
+	unsigned cnt;
+	unsigned i;
+	uint_t type;
+	void *jdata;
+	void *data;
+
+	jlshdr = FUNC(find_shdr)(ehdr, "__jump_table", SHT_PROGBITS);
+	if (!jlshdr)
+		return;
+
+	jlrhdr = FUNC(find_relhdr)(ehdr, jlshdr);
+	if (!jlrhdr)
+		return;
+
+	/*
+	 * Create and fill in the __jump_table section and use it to
+	 * find the offsets into the text that we want to update.
+	 * We create it so that we do not depend on the order of the
+	 * relocations, and use the table directly, as it is broken
+	 * up into sections.
+	 */
+	size = _w(jlshdr->sh_size);
+	data = umalloc(size);
+
+	jdata = (void *)get_section_loc(ehdr, jlshdr);
+	memcpy(data, jdata, size);
+
+	cnt = _w(jlrhdr->sh_size) / w(jlrhdr->sh_entsize);
+
+	rel = (const Elf_Rel *)get_section_loc(ehdr, jlrhdr);
+
+	/* Is this as Rel or Rela? */
+	type = w(jlrhdr->sh_type);
+
+	symhdr = FUNC(find_shdr)(ehdr, NULL, SHT_SYMTAB);
+
+	for (i = 0; i < cnt; i++) {
+		FUNC(section_update)(ehdr, symhdr, type, rel, data);
+		rel = (void *)rel + w(jlrhdr->sh_entsize);
+	}
+
+	/*
+	 * This is specific to x86. The jump_table is stored in three
+	 * long words. The first is the location of the jmp target we
+	 * must update.
+	 */
+	cnt = size / sizeof(uint_t);
+
+	for (i = 0; i < cnt; i += 3)
+		make_nop((void *)ehdr, *(uint_t *)(data + i * sizeof(uint_t)));
+
+	free(data);
+}
-- 
1.7.8.3



[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

^ permalink raw reply related	[flat|nested] 22+ messages in thread

* [PATCH 5/5 v2] x86/jump labels: Use etiher 5 byte or 2 byte jumps
  2012-01-28 16:09 [PATCH 0/5 v2] [GIT PULL] x86/jump label: Paranoid checks and 2 or 5 byte nops Steven Rostedt
                   ` (3 preceding siblings ...)
  2012-01-28 16:09 ` [PATCH 4/5 v2] jump labels: Add infrastructure to update jump labels at compile time Steven Rostedt
@ 2012-01-28 16:09 ` Steven Rostedt
  2012-01-30 14:48 ` [PATCH 0/5 v2] [GIT PULL] x86/jump label: Paranoid checks and 2 or 5 byte nops Ingo Molnar
  5 siblings, 0 replies; 22+ messages in thread
From: Steven Rostedt @ 2012-01-28 16:09 UTC (permalink / raw)
  To: linux-kernel
  Cc: Ingo Molnar, Andrew Morton, Jason Baron, H. Peter Anvin,
	Frederic Weisbecker

[-- Attachment #1: Type: text/plain, Size: 6662 bytes --]

From: Steven Rostedt <srostedt@redhat.com>

Have the jump labels add a "jmp" in the assembly instead
of a default nop. This will cause the assembler to put in
either a 2 byte or 5 byte jmp depending on where the target
lable is.

Then at compile time, the update_jump_label code will replace
the jmps with either 2 or 5 byte nops.

On boot up, the code can be examined to see if the jump label
uses either a 2 or 5 byte nop and replace it.

By allowing the jump labels to be 2 bytes, it speeds up the
nops, not only 2 byte nops are faster than 5 byte nops, but also
because it saves on cache foot print.

   text    data     bss     dec     hex filename
13403667 3666856 2998272 20068795 13239bb ../nobackup/mxtest/vmlinux-old
13398536 3666856 2998272 20063664 13225b0 ../nobackup/mxtest/vmlinux-new

Converting the current v3.2 trace points saved 5,131 bytes.
As more places use jump labels, this will have a bigger savings.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
---
 arch/x86/Kconfig                  |    1 +
 arch/x86/include/asm/jump_label.h |    7 +++-
 arch/x86/kernel/jump_label.c      |   85 ++++++++++++++++++++++++++++--------
 3 files changed, 73 insertions(+), 20 deletions(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index efb4294..b5004c1 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -61,6 +61,7 @@ config X86
 	select HAVE_ARCH_KMEMCHECK
 	select HAVE_USER_RETURN_NOTIFIER
 	select HAVE_ARCH_JUMP_LABEL
+	select HAVE_BUILD_TIME_JUMP_LABEL
 	select HAVE_TEXT_POKE_SMP
 	select HAVE_GENERIC_HARDIRQS
 	select HAVE_SPARSE_IRQ
diff --git a/arch/x86/include/asm/jump_label.h b/arch/x86/include/asm/jump_label.h
index 7082743..ba12f7e 100644
--- a/arch/x86/include/asm/jump_label.h
+++ b/arch/x86/include/asm/jump_label.h
@@ -10,6 +10,11 @@
 
 #define JUMP_LABEL_NOP_SIZE 5
 
+/*
+ * The JUMP_LABEL_INIT_NOP must match the nops used in
+ * scripts/update_jump_label.c. Otherwise the boot time checks
+ * will fail and trigger a BUG() on boot up.
+ */
 #ifdef CONFIG_X86_64
 # define JUMP_LABEL_INIT_NOP P6_NOP5_ATOMIC
 #else
@@ -19,7 +24,7 @@
 static __always_inline bool arch_static_branch(struct jump_label_key *key)
 {
 	asm goto("1:"
-		".byte " __stringify(JUMP_LABEL_INIT_NOP) "\n\t"
+		"jmp %l[l_yes]\n"
 		".pushsection __jump_table,  \"aw\" \n\t"
 		_ASM_ALIGN "\n\t"
 		_ASM_PTR "1b, %l[l_yes], %c0 \n\t"
diff --git a/arch/x86/kernel/jump_label.c b/arch/x86/kernel/jump_label.c
index 12a8812..7112a27 100644
--- a/arch/x86/kernel/jump_label.c
+++ b/arch/x86/kernel/jump_label.c
@@ -16,12 +16,20 @@
 
 #ifdef HAVE_JUMP_LABEL
 
+/* These are the nops added at compile time */
+static const unsigned char nop_short[] = { P6_NOP2 };
+static const unsigned char default_nop[] = { JUMP_LABEL_INIT_NOP };
+
 union jump_code_union {
 	char code[JUMP_LABEL_NOP_SIZE];
 	struct {
 		char jump;
 		int offset;
-	} __attribute__((packed));
+	} __packed;
+	struct {
+		char jump_short;
+		char offset_short;
+	} __packed;
 };
 
 static void __jump_label_transform(struct jump_entry *entry,
@@ -30,18 +38,33 @@ static void __jump_label_transform(struct jump_entry *entry,
 				   int init)
 {
 	union jump_code_union code;
+	unsigned char nop;
+	unsigned char op;
+	unsigned size;
+	void *ip = (void *)entry->code;
 	const unsigned char *ideal_nop = ideal_nops[NOP_ATOMIC5];
 
-	if (type == JUMP_LABEL_ENABLE) {
-		/*
-		 * We are enabling this jump label. If it is not a nop
-		 * then something must have gone wrong.
-		 */
-		BUG_ON(memcmp((void *)entry->code, ideal_nop, 5) != 0);
+	/* Use probe_kernel_read()? */
+	op = *(unsigned char *)ip;
+	nop = ideal_nops[NOP_ATOMIC5][0];
 
-		code.jump = 0xe9;
-		code.offset = entry->target -
-				(entry->code + JUMP_LABEL_NOP_SIZE);
+	if (type == JUMP_LABEL_ENABLE) {
+		if (memcmp(ip, nop_short, 2) == 0) {
+			size = 2;
+			code.jump_short = 0xeb;
+			code.offset = entry->target - (entry->code + 2);
+			/* Check for overflow ? */
+		} else if (memcmp(ip, ideal_nop, 5) == 0) {
+			size = JUMP_LABEL_NOP_SIZE;
+			code.jump = 0xe9;
+			code.offset = entry->target - (entry->code + size);
+		} else
+			/*
+			 * The location is not a nop that we were expecting,
+			 * something went wrong. Crash the box, as something could be
+			 * corrupting the kernel.
+			 */
+			BUG();
 	} else {
 		/*
 		 * We are disabling this jump label. If it is not what
@@ -50,18 +73,44 @@ static void __jump_label_transform(struct jump_entry *entry,
 		 * are converting the default nop to the ideal nop.
 		 */
 		if (init) {
-			const unsigned char default_nop[] = { JUMP_LABEL_INIT_NOP };
-			BUG_ON(memcmp((void *)entry->code, default_nop, 5) != 0);
-		} else {
+			/* Ignore short nops, we do not change them */
+			if (memcmp(ip, nop_short, 2) == 0)
+				return;
+
+			/* We are initializing from the default nop */
+			BUG_ON(memcmp(ip, default_nop, 5) != 0);
+
+			/* Set to the ideal nop */
+			size = JUMP_LABEL_NOP_SIZE;
+			memcpy(&code, ideal_nops[NOP_ATOMIC5], size);
+
+		} else if (op == 0xe9) {
+			/* Replace a 5 byte jmp */
+
+			/* Make sure this is what we expected it to be */
 			code.jump = 0xe9;
 			code.offset = entry->target -
 				(entry->code + JUMP_LABEL_NOP_SIZE);
-			BUG_ON(memcmp((void *)entry->code, &code, 5) != 0);
-		}
-		memcpy(&code, ideal_nops[NOP_ATOMIC5], JUMP_LABEL_NOP_SIZE);
+			BUG_ON(memcmp(ip, &code, 5) != 0);
+
+			size = JUMP_LABEL_NOP_SIZE;
+			memcpy(&code, ideal_nops[NOP_ATOMIC5], size);
+		} else if (op == 0xeb) {
+			/* Replace a 2 byte jmp */
+
+			/* Had better be a 2 byte jmp */
+			code.jump_short = 0xeb;
+			code.offset = entry->target - (entry->code + 2);
+			BUG_ON(memcmp(ip, &code, 2) != 0);
+
+			size = 2;
+			memcpy(&code, nop_short, size);
+		} else
+			/* The code was not what we expected!  */
+			BUG();
 	}
 
-	(*poker)((void *)entry->code, &code, JUMP_LABEL_NOP_SIZE);
+	(*poker)(ip, &code, size);
 }
 
 void arch_jump_label_transform(struct jump_entry *entry,
@@ -88,7 +137,6 @@ void arch_jump_label_transform_static(struct jump_entry *entry,
 	 * If it is not, then we need to update the nop to the ideal nop.
 	 */
 	if (!once) {
-		const unsigned char default_nop[] = { JUMP_LABEL_INIT_NOP };
 		const unsigned char *ideal_nop = ideal_nops[NOP_ATOMIC5];
 		once++;
 		if (memcmp(ideal_nop, default_nop, 5) != 0)
@@ -97,5 +145,4 @@ void arch_jump_label_transform_static(struct jump_entry *entry,
 	if (update)
 		__jump_label_transform(entry, type, text_poke_early, 1);
 }
-
 #endif
-- 
1.7.8.3



[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

^ permalink raw reply related	[flat|nested] 22+ messages in thread

* Re: [PATCH 0/5 v2] [GIT PULL] x86/jump label: Paranoid checks and 2 or 5 byte nops
  2012-01-28 16:09 [PATCH 0/5 v2] [GIT PULL] x86/jump label: Paranoid checks and 2 or 5 byte nops Steven Rostedt
                   ` (4 preceding siblings ...)
  2012-01-28 16:09 ` [PATCH 5/5 v2] x86/jump labels: Use etiher 5 byte or 2 byte jumps Steven Rostedt
@ 2012-01-30 14:48 ` Ingo Molnar
  2012-01-30 15:07   ` Steven Rostedt
  5 siblings, 1 reply; 22+ messages in thread
From: Ingo Molnar @ 2012-01-30 14:48 UTC (permalink / raw)
  To: Steven Rostedt
  Cc: linux-kernel, Andrew Morton, Jason Baron, H. Peter Anvin,
	Frederic Weisbecker


* Steven Rostedt <rostedt@goodmis.org> wrote:

> 
> Ingo,
> 
> This is the second round with the suggestions made by Peter 
> and Andrew incorporated (and tested).

they are crashing my testbox:

Policy zone: DMA32
Kernel command line: root=/dev/sda6 earlyprintk=ttyS0,115200 
console=ttyS0,115200 debug initcall_de
bug sysrq_always_enabled ignore_loglevel selinux=0 
nmi_watchdog=1 panic=1 3
sysrq: sysrq always enabled.
PANIC: early exception 06 rip 10:ffffffff8101546d error 0 cr2 
f06f53
Pid: 0, comm: swapper Not tainted 
3.3.0-rc1-tip-02083-ga5066f8-dirty #170372
Call Trace:
 [<ffffffff8101546d>] ? __jump_label_transform+0x81/0x14e
 [<ffffffff81063ee4>] ? try_to_wake_up+0x1f8/0x2cc
 [<ffffffff8184d19e>] early_idt_handler+0x5e/0x71
 [<ffffffff8101546d>] ? __jump_label_transform+0x81/0x14e
 [<ffffffff81015457>] ? __jump_label_transform+0x6b/0x14e
 [<ffffffff810155f8>] arch_jump_label_transform_static+0x6f/0x77
 [<ffffffff81865162>] jump_label_init+0x68/0x98
 [<ffffffff8184d98b>] start_kernel+0x182/0x3b8
 [<ffffffff8184d2c3>] x86_64_start_reservations+0xae/0xb2
 [<ffffffff8184d40d>] x86_64_start_kernel+0x146/0x153
RIP __jump_label_transform+0x81/0x14e

Do you need the config or is the bug obvious at first sight?

Thanks,

	Ingo

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [PATCH 0/5 v2] [GIT PULL] x86/jump label: Paranoid checks and 2 or 5 byte nops
  2012-01-30 14:48 ` [PATCH 0/5 v2] [GIT PULL] x86/jump label: Paranoid checks and 2 or 5 byte nops Ingo Molnar
@ 2012-01-30 15:07   ` Steven Rostedt
  2012-01-31 19:48     ` Ingo Molnar
  0 siblings, 1 reply; 22+ messages in thread
From: Steven Rostedt @ 2012-01-30 15:07 UTC (permalink / raw)
  To: Ingo Molnar
  Cc: linux-kernel, Andrew Morton, Jason Baron, H. Peter Anvin,
	Frederic Weisbecker

On Mon, 2012-01-30 at 15:48 +0100, Ingo Molnar wrote:
> * Steven Rostedt <rostedt@goodmis.org> wrote:
> 
> > 
> > Ingo,
> > 
> > This is the second round with the suggestions made by Peter 
> > and Andrew incorporated (and tested).
> 
> they are crashing my testbox:
> 
> Policy zone: DMA32
> Kernel command line: root=/dev/sda6 earlyprintk=ttyS0,115200 
> console=ttyS0,115200 debug initcall_de
> bug sysrq_always_enabled ignore_loglevel selinux=0 
> nmi_watchdog=1 panic=1 3
> sysrq: sysrq always enabled.
> PANIC: early exception 06 rip 10:ffffffff8101546d error 0 cr2 
> f06f53
> Pid: 0, comm: swapper Not tainted 
> 3.3.0-rc1-tip-02083-ga5066f8-dirty #170372
> Call Trace:
>  [<ffffffff8101546d>] ? __jump_label_transform+0x81/0x14e
>  [<ffffffff81063ee4>] ? try_to_wake_up+0x1f8/0x2cc
>  [<ffffffff8184d19e>] early_idt_handler+0x5e/0x71
>  [<ffffffff8101546d>] ? __jump_label_transform+0x81/0x14e
>  [<ffffffff81015457>] ? __jump_label_transform+0x6b/0x14e
>  [<ffffffff810155f8>] arch_jump_label_transform_static+0x6f/0x77
>  [<ffffffff81865162>] jump_label_init+0x68/0x98
>  [<ffffffff8184d98b>] start_kernel+0x182/0x3b8
>  [<ffffffff8184d2c3>] x86_64_start_reservations+0xae/0xb2
>  [<ffffffff8184d40d>] x86_64_start_kernel+0x146/0x153
> RIP __jump_label_transform+0x81/0x14e
> 
> Do you need the config or is the bug obvious at first sight?

Could you post the exact line of that address?

<ffffffff8101546d>

I know there was some work to default enable some code. I'm not sure how
much made it in. I'm thinking the line you triggered was:
		/*
		 * The location is not a nop that we were expecting,
		 * something went wrong. Crash the box, as something could be
		 * corrupting the kernel.
		 */
		BUG();


It hits this if we enable a nop that is not what we expect it to be.

Yeah, send me the config too, and I'll run this against tip/master with
all the patches applied.

Thanks!

-- Steve



^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [PATCH 0/5 v2] [GIT PULL] x86/jump label: Paranoid checks and 2 or 5 byte nops
  2012-01-30 15:07   ` Steven Rostedt
@ 2012-01-31 19:48     ` Ingo Molnar
  2012-02-01  5:08       ` Steven Rostedt
  0 siblings, 1 reply; 22+ messages in thread
From: Ingo Molnar @ 2012-01-31 19:48 UTC (permalink / raw)
  To: Steven Rostedt
  Cc: linux-kernel, Andrew Morton, Jason Baron, H. Peter Anvin,
	Frederic Weisbecker

[-- Attachment #1: Type: text/plain, Size: 2159 bytes --]


* Steven Rostedt <rostedt@goodmis.org> wrote:

> On Mon, 2012-01-30 at 15:48 +0100, Ingo Molnar wrote:
> > * Steven Rostedt <rostedt@goodmis.org> wrote:
> > 
> > > 
> > > Ingo,
> > > 
> > > This is the second round with the suggestions made by Peter 
> > > and Andrew incorporated (and tested).
> > 
> > they are crashing my testbox:
> > 
> > Policy zone: DMA32
> > Kernel command line: root=/dev/sda6 earlyprintk=ttyS0,115200 
> > console=ttyS0,115200 debug initcall_de
> > bug sysrq_always_enabled ignore_loglevel selinux=0 
> > nmi_watchdog=1 panic=1 3
> > sysrq: sysrq always enabled.
> > PANIC: early exception 06 rip 10:ffffffff8101546d error 0 cr2 
> > f06f53
> > Pid: 0, comm: swapper Not tainted 
> > 3.3.0-rc1-tip-02083-ga5066f8-dirty #170372
> > Call Trace:
> >  [<ffffffff8101546d>] ? __jump_label_transform+0x81/0x14e
> >  [<ffffffff81063ee4>] ? try_to_wake_up+0x1f8/0x2cc
> >  [<ffffffff8184d19e>] early_idt_handler+0x5e/0x71
> >  [<ffffffff8101546d>] ? __jump_label_transform+0x81/0x14e
> >  [<ffffffff81015457>] ? __jump_label_transform+0x6b/0x14e
> >  [<ffffffff810155f8>] arch_jump_label_transform_static+0x6f/0x77
> >  [<ffffffff81865162>] jump_label_init+0x68/0x98
> >  [<ffffffff8184d98b>] start_kernel+0x182/0x3b8
> >  [<ffffffff8184d2c3>] x86_64_start_reservations+0xae/0xb2
> >  [<ffffffff8184d40d>] x86_64_start_kernel+0x146/0x153
> > RIP __jump_label_transform+0x81/0x14e
> > 
> > Do you need the config or is the bug obvious at first sight?
> 
> Could you post the exact line of that address?
> 
> <ffffffff8101546d>
>
> I know there was some work to default enable some code. I'm 
> not sure how much made it in. I'm thinking the line you 
> triggered was:
> 		/*
> 		 * The location is not a nop that we were expecting,
> 		 * something went wrong. Crash the box, as something could be
> 		 * corrupting the kernel.
> 		 */
> 		BUG();

Correct, it's the ud2.

> It hits this if we enable a nop that is not what we expect it to be.
> 
> Yeah, send me the config too, and I'll run this against tip/master with
> all the patches applied.

Attached. (you need to run it through make oldconfig and use the 
defaults.)

Thanks,

	Ingo

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 74055 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 3.3.0-rc1 Kernel Configuration
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
# CONFIG_GENERIC_ISA_DMA is not set
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_MAY_HAVE_PC_FDC is not set
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
# CONFIG_KTIME_SCALAR is not set
CONFIG_BOOTPARAM_SUPPORT_NOT_WANTED=y
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
# CONFIG_BROKEN_BOOT_ALLOWED4 is not set
# CONFIG_BROKEN_BOOT_DISALLOWED is not set
CONFIG_BROKEN_BOOT_EUROPE=y
CONFIG_BROKEN_BOOT_TITAN=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
CONFIG_KERNEL_BZIP2=y
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_FHANDLE=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
CONFIG_AUDIT_LOGINUID_IMMUTABLE=y
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_EXACT=y
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
# CONFIG_PROC_PID_CPUSET is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_RT_GROUP_SCHED=y
CONFIG_BLK_CGROUP=y
CONFIG_DEBUG_BLK_CGROUP=y
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_NAMESPACES is not set
# CONFIG_SCHED_AUTOGROUP is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not set
CONFIG_HAVE_PCSPKR_PLATFORM=y
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_AIO is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
CONFIG_DEBUG_PERF_USE_VMALLOC=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PCI_QUIRKS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_JUMP_LABEL=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_BUILD_TIME_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y

#
# GCOV-based kernel profiling
#
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLK_DEV_THROTTLING=y

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
CONFIG_ATARI_PARTITION=y
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
CONFIG_KARMA_PARTITION=y
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CFQ_GROUP_IOSCHED is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
# CONFIG_SMP_SUPPORT is not set
CONFIG_X86_MPPARSE=y
CONFIG_X86_EXTENDED_PLATFORM=y
CONFIG_X86_VSMP=y
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_KVMTOOL_TEST_ENABLE=y
CONFIG_PARAVIRT_GUEST=y
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
# CONFIG_XEN is not set
# CONFIG_XEN_PRIVILEGED_GUEST is not set
# CONFIG_KVM_CLOCK is not set
# CONFIG_KVM_GUEST is not set
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_PARAVIRT_DEBUG=y
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=12
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
# CONFIG_CPU_SUP_INTEL is not set
CONFIG_CPU_SUP_AMD=y
# CONFIG_CPU_SUP_CENTAUR is not set
CONFIG_HPET_TIMER=y
# CONFIG_DMI is not set
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
# CONFIG_SCHED_MC is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=y
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_UP_WANTED_1=y
CONFIG_UP_WANTED_2=y
# CONFIG_UP_WANTED is not set
CONFIG_SMP=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
# CONFIG_DIRECT_GBPAGES is not set
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_COMPACTION is not set
# CONFIG_MIGRATION is not set
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=y
# CONFIG_TRANSPARENT_HUGEPAGE is not set
# CONFIG_CLEANCACHE is not set
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
# CONFIG_ARCH_RANDOM is not set
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y

#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_ACPI is not set
CONFIG_SFI=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set

#
# x86 CPU frequency scaling drivers
#
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
# CONFIG_PCIEAER is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEBUG=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
# CONFIG_ISA_DMA_API is not set
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
# CONFIG_YENTA is not set
CONFIG_PD6729=y
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=y
CONFIG_HOTPLUG_PCI_CPCI=y
# CONFIG_HOTPLUG_PCI_CPCI_ZT5550 is not set
# CONFIG_HOTPLUG_PCI_CPCI_GENERIC is not set
CONFIG_HOTPLUG_PCI_SHPC=y
# CONFIG_RAPIDIO is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_KEYS_COMPAT=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
CONFIG_XFRM_SUB_POLICY=y
# CONFIG_XFRM_MIGRATE is not set
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=y
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_ARPD=y
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
CONFIG_INET_XFRM_MODE_TUNNEL=y
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
CONFIG_IPV6_ROUTER_PREF=y
# CONFIG_IPV6_ROUTE_INFO is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
CONFIG_INET6_IPCOMP=y
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
CONFIG_INET6_XFRM_MODE_TUNNEL=y
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_SIT is not set
CONFIG_IPV6_TUNNEL=y
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
CONFIG_IP_DCCP=y

#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
# CONFIG_IP_DCCP_CCID3 is not set

#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
CONFIG_SCTP_HMAC_SHA1=y
# CONFIG_SCTP_HMAC_MD5 is not set
CONFIG_RDS=y
CONFIG_RDS_TCP=y
# CONFIG_RDS_DEBUG is not set
CONFIG_TIPC=y
CONFIG_TIPC_ADVANCED=y
CONFIG_TIPC_PORTS=8191
CONFIG_TIPC_LOG=0
# CONFIG_TIPC_DEBUG is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_NET_DSA_TAG_TRAILER=y
# CONFIG_VLAN_8021Q is not set
CONFIG_DECNET=y
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_PHONET=y
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
CONFIG_NET_SCH_HTB=y
CONFIG_NET_SCH_HFSC=y
CONFIG_NET_SCH_PRIO=y
# CONFIG_NET_SCH_MULTIQ is not set
CONFIG_NET_SCH_RED=y
CONFIG_NET_SCH_SFB=y
# CONFIG_NET_SCH_SFQ is not set
CONFIG_NET_SCH_TEQL=y
# CONFIG_NET_SCH_TBF is not set
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
# CONFIG_NET_SCH_NETEM is not set
CONFIG_NET_SCH_DRR=y
CONFIG_NET_SCH_MQPRIO=y
# CONFIG_NET_SCH_CHOKE is not set
CONFIG_NET_SCH_QFQ=y

#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_ROUTE4=y
# CONFIG_NET_CLS_FW is not set
CONFIG_NET_CLS_U32=y
# CONFIG_CLS_U32_PERF is not set
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=y
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_CLS_CGROUP=y
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=y
# CONFIG_BATMAN_ADV_DEBUG is not set
# CONFIG_OPENVSWITCH is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_NETPRIO_CGROUP is not set
CONFIG_BQL=y
CONFIG_HAVE_BPF_JIT=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
CONFIG_CAN=y
# CONFIG_CAN_RAW is not set
# CONFIG_CAN_BCM is not set
CONFIG_CAN_GW=y

#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=y
CONFIG_CAN_SLCAN=y
CONFIG_CAN_DEV=y
CONFIG_CAN_CALC_BITTIMING=y
CONFIG_CAN_JANZ_ICAN3=y
CONFIG_PCH_CAN=y
CONFIG_CAN_SJA1000=y
CONFIG_CAN_SJA1000_ISA=y
# CONFIG_CAN_SJA1000_PLATFORM is not set
# CONFIG_CAN_EMS_PCMCIA is not set
# CONFIG_CAN_EMS_PCI is not set
# CONFIG_CAN_PEAK_PCI is not set
# CONFIG_CAN_KVASER_PCI is not set
CONFIG_CAN_PLX_PCI=y
CONFIG_CAN_C_CAN=y
# CONFIG_CAN_C_CAN_PLATFORM is not set
# CONFIG_CAN_CC770 is not set

#
# CAN USB interfaces
#
# CONFIG_CAN_EMS_USB is not set
# CONFIG_CAN_ESD_USB2 is not set
CONFIG_CAN_SOFTING=y
CONFIG_CAN_SOFTING_CS=y
# CONFIG_CAN_DEBUG_DEVICES is not set
CONFIG_IRDA=y

#
# IrDA protocols
#
# CONFIG_IRLAN is not set
CONFIG_IRNET=y
CONFIG_IRCOMM=y
# CONFIG_IRDA_ULTRA is not set

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=y

#
# Dongle support
#
CONFIG_DONGLE=y
# CONFIG_ESI_DONGLE is not set
CONFIG_ACTISYS_DONGLE=y
# CONFIG_TEKRAM_DONGLE is not set
CONFIG_TOIM3232_DONGLE=y
# CONFIG_LITELINK_DONGLE is not set
CONFIG_MA600_DONGLE=y
CONFIG_GIRBIL_DONGLE=y
CONFIG_MCP2120_DONGLE=y
CONFIG_OLD_BELKIN_DONGLE=y
# CONFIG_ACT200L_DONGLE is not set
CONFIG_KINGSUN_DONGLE=y
# CONFIG_KSDAZZLE_DONGLE is not set
CONFIG_KS959_DONGLE=y

#
# FIR device drivers
#
CONFIG_USB_IRDA=y
# CONFIG_SIGMATEL_FIR is not set
CONFIG_VLSI_FIR=y
CONFIG_MCS_FIR=y
CONFIG_BT=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
# CONFIG_BT_BNEP is not set
CONFIG_BT_CMTP=y
CONFIG_BT_HIDP=y

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=y
# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=y
# CONFIG_BT_HCIUART_H4 is not set
# CONFIG_BT_HCIUART_BCSP is not set
CONFIG_BT_HCIUART_ATH3K=y
# CONFIG_BT_HCIUART_LL is not set
# CONFIG_BT_HCIBCM203X is not set
CONFIG_BT_HCIBPA10X=y
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIDTL1 is not set
# CONFIG_BT_HCIBT3C is not set
CONFIG_BT_HCIBLUECARD=y
CONFIG_BT_HCIBTUART=y
CONFIG_BT_HCIVHCI=y
# CONFIG_BT_MRVL is not set
CONFIG_BT_ATH3K=y
# CONFIG_BT_WILINK is not set
CONFIG_AF_RXRPC=y
# CONFIG_AF_RXRPC_DEBUG is not set
# CONFIG_RXKAD is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
CONFIG_CFG80211_DEVELOPER_WARNINGS=y
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_REGULATOR=y
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
CONFIG_NET_9P_DEBUG=y
CONFIG_CAIF=y
# CONFIG_CAIF_DEBUG is not set
CONFIG_CAIF_NETDEV=y
CONFIG_CAIF_USB=y
CONFIG_CEPH_LIB=y
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y
CONFIG_NFC=y
CONFIG_NFC_NCI=y
CONFIG_NFC_LLCP=y

#
# Near Field Communication (NFC) devices
#
# CONFIG_PN544_NFC is not set
# CONFIG_NFC_PN533 is not set
# CONFIG_NFC_WILINK is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
CONFIG_DEBUG_DRIVER=y
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_IRQ=y
# CONFIG_DMA_SHARED_BUFFER is not set
# CONFIG_CONNECTOR is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
CONFIG_BLK_CPQ_DA=y
CONFIG_BLK_CPQ_CISS_DA=y
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set

#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_XIP=y
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=y
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_RBD=y
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_MISC_DEVICES=y
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
CONFIG_IBM_ASM=y
CONFIG_PHANTOM=y
# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_CS5535_MFGPT=y
CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
# CONFIG_CS5535_CLOCK_EVENT_SRC is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
CONFIG_ISL29020=y
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_VMWARE_BALLOON is not set
CONFIG_BMP085=y
# CONFIG_PCH_PHUB is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_MAX8997_MUIC is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_LEGACY=y
CONFIG_EEPROM_MAX6875=y
# CONFIG_EEPROM_93CX6 is not set
CONFIG_CB710_CORE=y
CONFIG_CB710_DEBUG=y
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
CONFIG_IWMC3200TOP=y
# CONFIG_IWMC3200TOP_DEBUG is not set
CONFIG_IWMC3200TOP_DEBUGFS=y

#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=y
CONFIG_SENSORS_LIS3_I2C=y

#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
CONFIG_HAVE_IDE=y

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
CONFIG_CHR_DEV_OSST=y
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_ENCLOSURE=y
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_FC_TGT_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
# CONFIG_SCSI_SAS_LIBSAS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
CONFIG_ISCSI_BOOT_SYSFS=y
# CONFIG_SCSI_CXGB3_ISCSI is not set
CONFIG_SCSI_CXGB4_ISCSI=y
# CONFIG_SCSI_BNX2_ISCSI is not set
CONFIG_SCSI_BNX2X_FCOE=y
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
CONFIG_SCSI_3W_9XXX=y
CONFIG_SCSI_3W_SAS=y
CONFIG_SCSI_ACARD=y
CONFIG_SCSI_AACRAID=y
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
CONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_MPT2SAS=y
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS_LOGGING=y
# CONFIG_SCSI_HPTIOP is not set
CONFIG_VMWARE_PVSCSI=y
CONFIG_LIBFC=y
CONFIG_LIBFCOE=y
CONFIG_FCOE=y
CONFIG_FCOE_FNIC=y
CONFIG_SCSI_DMX3191D=y
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_ISCI is not set
CONFIG_SCSI_IPS=y
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_STEX=y
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA_FC=y
CONFIG_SCSI_QLA_ISCSI=y
# CONFIG_SCSI_LPFC is not set
CONFIG_SCSI_DC395x=y
CONFIG_SCSI_DC390T=y
CONFIG_SCSI_PMCRAID=y
# CONFIG_SCSI_PM8001 is not set
CONFIG_SCSI_SRP=y
# CONFIG_SCSI_BFA_FC is not set
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
# CONFIG_SCSI_DH is not set
CONFIG_SCSI_OSD_INITIATOR=y
# CONFIG_SCSI_OSD_ULD is not set
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
# CONFIG_SATA_PMP is not set

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_SATA_INIC162X=y
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
CONFIG_SATA_QSTOR=y
CONFIG_SATA_SX4=y
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=y
CONFIG_SATA_NV=y
CONFIG_SATA_PROMISE=y
# CONFIG_SATA_SIL is not set
CONFIG_SATA_SIS=y
CONFIG_SATA_SVW=y
CONFIG_SATA_ULI=y
CONFIG_SATA_VIA=y
CONFIG_SATA_VITESSE=y

#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=y
CONFIG_PATA_AMD=y
# CONFIG_PATA_ARASAN_CF is not set
# CONFIG_PATA_ARTOP is not set
CONFIG_PATA_ATIIXP=y
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
CONFIG_PATA_CS5520=y
CONFIG_PATA_CS5530=y
# CONFIG_PATA_CS5536 is not set
CONFIG_PATA_CYPRESS=y
# CONFIG_PATA_EFAR is not set
CONFIG_PATA_HPT366=y
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
CONFIG_PATA_IT8213=y
CONFIG_PATA_IT821X=y
# CONFIG_PATA_JMICRON is not set
CONFIG_PATA_MARVELL=y
CONFIG_PATA_NETCELL=y
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OLDPIIX=y
CONFIG_PATA_OPTIDMA=y
# CONFIG_PATA_PDC2027X is not set
CONFIG_PATA_PDC_OLD=y
CONFIG_PATA_RADISYS=y
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
CONFIG_PATA_SCH=y
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
CONFIG_PATA_SIS=y
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_VIA=y
CONFIG_PATA_WINBOND=y

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
CONFIG_PATA_NS87410=y
CONFIG_PATA_OPTI=y
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PLATFORM is not set
CONFIG_PATA_RZ1000=y

#
# Generic fallback / legacy drivers
#
# CONFIG_ATA_GENERIC is not set
CONFIG_PATA_LEGACY=y
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
CONFIG_FIREWIRE_OHCI_DEBUG=y
CONFIG_FIREWIRE_SBP2=y
CONFIG_FIREWIRE_NET=y
CONFIG_FIREWIRE_NOSY=y
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_MAC_EMUMOUSEBTN is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
CONFIG_BONDING=y
# CONFIG_DUMMY is not set
CONFIG_EQUALIZER=y
CONFIG_NET_FC=y
CONFIG_MII=y
# CONFIG_NET_TEAM is not set
CONFIG_MACVLAN=y
# CONFIG_MACVTAP is not set
CONFIG_NETCONSOLE=y
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=y
CONFIG_VETH=y
CONFIG_VIRTIO_NET=y
CONFIG_ARCNET=y
CONFIG_ARCNET_1201=y
CONFIG_ARCNET_1051=y
# CONFIG_ARCNET_RAW is not set
CONFIG_ARCNET_CAP=y
CONFIG_ARCNET_COM90xx=y
# CONFIG_ARCNET_COM90xxIO is not set
CONFIG_ARCNET_RIM_I=y
# CONFIG_ARCNET_COM20020 is not set

#
# CAIF transport drivers
#
CONFIG_CAIF_TTY=y
# CONFIG_CAIF_SPI_SLAVE is not set
# CONFIG_CAIF_HSI is not set

#
# Distributed Switch Architecture drivers
#
CONFIG_NET_DSA_MV88E6XXX=y
CONFIG_NET_DSA_MV88E6060=y
CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
CONFIG_NET_DSA_MV88E6131=y
CONFIG_NET_DSA_MV88E6123_61_65=y
CONFIG_ETHERNET=y
CONFIG_MDIO=y
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_VORTEX=y
# CONFIG_NET_VENDOR_ADAPTEC is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_NET_VENDOR_AMD is not set
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
CONFIG_ATL1C=y
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=y
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_BNX2=y
CONFIG_CNIC=y
CONFIG_TIGON3=y
# CONFIG_BNX2X is not set
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=y
CONFIG_NET_CALXEDA_XGMAC=y
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3=y
CONFIG_CHELSIO_T4=y
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=y
CONFIG_DNET=y
# CONFIG_NET_VENDOR_DEC is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
CONFIG_SUNDANCE=y
CONFIG_SUNDANCE_MMIO=y
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_EXAR is not set
CONFIG_NET_VENDOR_FUJITSU=y
# CONFIG_PCMCIA_FMVJ18X is not set
CONFIG_NET_VENDOR_HP=y
# CONFIG_HP100 is not set
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=y
CONFIG_E1000=y
CONFIG_E1000E=y
# CONFIG_IGB is not set
CONFIG_IGBVF=y
CONFIG_IXGB=y
CONFIG_IXGBE=y
# CONFIG_IXGBEVF is not set
# CONFIG_NET_VENDOR_I825XX is not set
# CONFIG_IP1000 is not set
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_MARVELL is not set
CONFIG_SKGE=y
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_FORCEDETH=y
# CONFIG_NET_VENDOR_OKI is not set
CONFIG_ETHOC=y
# CONFIG_NET_PACKET_ENGINE is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
CONFIG_QLCNIC=y
CONFIG_QLGE=y
CONFIG_NETXEN_NIC=y
# CONFIG_NET_VENDOR_REALTEK is not set
CONFIG_8139TOO=y
# CONFIG_NET_VENDOR_RDC is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_SEEQ8005=y
# CONFIG_NET_VENDOR_SILAN is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
CONFIG_SFC=y
CONFIG_NET_VENDOR_SMSC=y
CONFIG_PCMCIA_SMC91C92=y
CONFIG_EPIC100=y
# CONFIG_SMSC9420 is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
CONFIG_NET_VENDOR_VIA=y
CONFIG_VIA_RHINE=y
CONFIG_VIA_RHINE_MMIO=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_NET_VENDOR_XIRCOM is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
CONFIG_LXT_PHY=y
# CONFIG_CICADA_PHY is not set
CONFIG_VITESSE_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
# CONFIG_ICPLUS_PHY is not set
CONFIG_REALTEK_PHY=y
# CONFIG_NATIONAL_PHY is not set
CONFIG_STE10XP=y
# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_MICREL_PHY=y
CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_PPP=y
# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOE=y
CONFIG_PPP_ASYNC=y
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=y
CONFIG_TR=y
CONFIG_PCMCIA_IBMTR=y
CONFIG_IBMOL=y
CONFIG_3C359=y
CONFIG_TMS380TR=y
# CONFIG_TMSPCI is not set
CONFIG_ABYSS=y

#
# USB Network Adapters
#
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
# CONFIG_USB_USBNET is not set
CONFIG_USB_HSO=y
CONFIG_USB_CDC_PHONET=y
# CONFIG_USB_IPHETH is not set
# CONFIG_WLAN is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
CONFIG_WAN=y
# CONFIG_HDLC is not set
CONFIG_DLCI=y
CONFIG_DLCI_MAX=8
CONFIG_SBNI=y
CONFIG_SBNI_MULTILINE=y
# CONFIG_VMXNET3 is not set
CONFIG_ISDN=y
# CONFIG_ISDN_I4L is not set
CONFIG_ISDN_CAPI=y
# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set
# CONFIG_CAPI_TRACE is not set
# CONFIG_ISDN_CAPI_MIDDLEWARE is not set
# CONFIG_ISDN_CAPI_CAPI20 is not set

#
# CAPI hardware drivers
#
# CONFIG_CAPI_AVM is not set
CONFIG_CAPI_EICON=y
# CONFIG_ISDN_DIVAS is not set
CONFIG_ISDN_DRV_GIGASET=y
# CONFIG_GIGASET_CAPI is not set
CONFIG_GIGASET_DUMMYLL=y
CONFIG_GIGASET_BASE=y
# CONFIG_GIGASET_M105 is not set
# CONFIG_GIGASET_M101 is not set
CONFIG_GIGASET_DEBUG=y
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_EVDEV is not set
CONFIG_INPUT_EVBUG=y

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ADP5589=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
CONFIG_KEYBOARD_QT2160=y
CONFIG_KEYBOARD_LKKBD=y
CONFIG_KEYBOARD_GPIO=y
# CONFIG_KEYBOARD_GPIO_POLLED is not set
CONFIG_KEYBOARD_TCA6416=y
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
CONFIG_KEYBOARD_LM8323=y
# CONFIG_KEYBOARD_MAX7359 is not set
CONFIG_KEYBOARD_MCS=y
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
CONFIG_KEYBOARD_STOWAWAY=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_STMPE is not set
# CONFIG_KEYBOARD_TC3589X is not set
CONFIG_KEYBOARD_XTKBD=y
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
CONFIG_MOUSE_VSXXXAA=y
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_HANWANG is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_AD7879=y
CONFIG_TOUCHSCREEN_AD7879_I2C=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
CONFIG_TOUCHSCREEN_AUO_PIXCIR=y
CONFIG_TOUCHSCREEN_BU21013=y
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
CONFIG_TOUCHSCREEN_DA9034=y
CONFIG_TOUCHSCREEN_DYNAPRO=y
CONFIG_TOUCHSCREEN_HAMPSHIRE=y
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
CONFIG_TOUCHSCREEN_ELO=y
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
CONFIG_TOUCHSCREEN_MTOUCH=y
CONFIG_TOUCHSCREEN_INEXIO=y
CONFIG_TOUCHSCREEN_MK712=y
CONFIG_TOUCHSCREEN_PENMOUNT=y
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
CONFIG_TOUCHSCREEN_TOUCHWIN=y
CONFIG_TOUCHSCREEN_PIXCIR=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=y
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
# CONFIG_TOUCHSCREEN_USB_3M is not set
# CONFIG_TOUCHSCREEN_USB_ITM is not set
# CONFIG_TOUCHSCREEN_USB_ETURBO is not set
CONFIG_TOUCHSCREEN_USB_GUNZE=y
# CONFIG_TOUCHSCREEN_USB_DMC_TSC10 is not set
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
# CONFIG_TOUCHSCREEN_USB_IDEALTEK is not set
# CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH is not set
CONFIG_TOUCHSCREEN_USB_GOTOP=y
# CONFIG_TOUCHSCREEN_USB_JASTEC is not set
# CONFIG_TOUCHSCREEN_USB_ELO is not set
CONFIG_TOUCHSCREEN_USB_E2I=y
# CONFIG_TOUCHSCREEN_USB_ZYTRONIC is not set
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
# CONFIG_TOUCHSCREEN_USB_NEXIO is not set
CONFIG_TOUCHSCREEN_TOUCHIT213=y
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
CONFIG_TOUCHSCREEN_TSC2007=y
CONFIG_TOUCHSCREEN_ST1232=y
CONFIG_TOUCHSCREEN_STMPE=y
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=y
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
CONFIG_GAMEPORT_EMU10K1=y
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_VT=y
# CONFIG_CONSOLE_TRANSLATIONS is not set
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_ROCKETPORT=y
# CONFIG_CYCLADES is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_NOZOMI is not set
CONFIG_ISI=y
CONFIG_N_HDLC=y
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
# CONFIG_DEVKMEM is not set
CONFIG_STALDRV=y

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_CS=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_UARTLITE=y
# CONFIG_SERIAL_UARTLITE_CONSOLE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
CONFIG_SERIAL_JSM=y
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
CONFIG_SERIAL_XILINX_PS_UART=y
# CONFIG_SERIAL_XILINX_PS_UART_CONSOLE is not set
CONFIG_TTY_PRINTK=y
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PANIC_EVENT=y
# CONFIG_IPMI_PANIC_STRING is not set
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
# CONFIG_IPMI_WATCHDOG is not set
# CONFIG_IPMI_POWEROFF is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
CONFIG_APPLICOM=y

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
CONFIG_CARDMAN_4000=y
# CONFIG_CARDMAN_4040 is not set
CONFIG_IPWIRELESS=y
CONFIG_MWAVE=y
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
CONFIG_TELCLOCK=y
CONFIG_DEVPORT=y
CONFIG_RAMOOPS=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_MUX is not set
# CONFIG_I2C_HELPER_AUTO is not set
# CONFIG_I2C_SMBUS is not set

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=y
# CONFIG_I2C_ALI1563 is not set
CONFIG_I2C_ALI15X3=y
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
CONFIG_I2C_SIS5595=y
CONFIG_I2C_SIS630=y
# CONFIG_I2C_SIS96X is not set
CONFIG_I2C_VIA=y
CONFIG_I2C_VIAPRO=y

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_DESIGNWARE_PCI=y
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_INTEL_MID is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
# CONFIG_I2C_EG20T is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
# CONFIG_SPI is not set

#
# PPS support
#
CONFIG_PPS=y

#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=y
CONFIG_PPS_CLIENT_LDISC=y
CONFIG_PPS_CLIENT_GPIO=y

#
# PPS generators support
#

#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_DEBUG_GPIO=y
# CONFIG_GPIO_SYSFS is not set
CONFIG_GPIO_GENERIC=y

#
# Memory mapped GPIO drivers:
#
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_IT8761E=y
# CONFIG_GPIO_SCH is not set
CONFIG_GPIO_VX855=y

#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
CONFIG_GPIO_MAX732X=y
# CONFIG_GPIO_MAX732X_IRQ is not set
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_PCF857X=y
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_STMPE is not set
# CONFIG_GPIO_TC3589X is not set
CONFIG_GPIO_TPS65912=y
CONFIG_GPIO_WM8994=y
CONFIG_GPIO_ADP5588=y
# CONFIG_GPIO_ADP5588_IRQ is not set

#
# PCI GPIO expanders:
#
# CONFIG_GPIO_CS5535 is not set
CONFIG_GPIO_BT8XX=y
# CONFIG_GPIO_LANGWELL is not set
CONFIG_GPIO_PCH=y
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_TIMBERDALE is not set
CONFIG_GPIO_RDC321X=y

#
# SPI GPIO expanders:
#
CONFIG_GPIO_MCP23S08=y

#
# AC97 GPIO expanders:
#

#
# MODULbus GPIO expanders:
#
# CONFIG_GPIO_JANZ_TTL is not set
CONFIG_GPIO_TPS65910=y
CONFIG_W1=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
CONFIG_W1_MASTER_DS2490=y
CONFIG_W1_MASTER_DS2482=y
# CONFIG_W1_MASTER_DS1WM is not set
# CONFIG_W1_MASTER_GPIO is not set

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=y
CONFIG_W1_SLAVE_DS2408=y
# CONFIG_W1_SLAVE_DS2423 is not set
# CONFIG_W1_SLAVE_DS2431 is not set
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2760=y
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_BQ27000=y
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=y
# CONFIG_MAX8925_POWER is not set
# CONFIG_TEST_POWER is not set
CONFIG_BATTERY_DS2760=y
CONFIG_BATTERY_DS2780=y
CONFIG_BATTERY_DS2782=y
# CONFIG_BATTERY_SBS is not set
CONFIG_BATTERY_BQ27x00=y
# CONFIG_BATTERY_BQ27X00_I2C is not set
# CONFIG_BATTERY_BQ27X00_PLATFORM is not set
# CONFIG_BATTERY_DA9030 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
CONFIG_CHARGER_ISP1704=y
CONFIG_CHARGER_MAX8903=y
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y

#
# Native drivers
#
CONFIG_SENSORS_AD7414=y
CONFIG_SENSORS_AD7418=y
# CONFIG_SENSORS_ADM1021 is not set
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=y
CONFIG_SENSORS_ADM1029=y
CONFIG_SENSORS_ADM1031=y
CONFIG_SENSORS_ADM9240=y
# CONFIG_SENSORS_ADT7411 is not set
CONFIG_SENSORS_ADT7462=y
# CONFIG_SENSORS_ADT7470 is not set
CONFIG_SENSORS_ADT7475=y
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
CONFIG_SENSORS_K10TEMP=y
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_ASB100 is not set
CONFIG_SENSORS_ATXP1=y
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
CONFIG_SENSORS_I5K_AMB=y
# CONFIG_SENSORS_F71805F is not set
CONFIG_SENSORS_F71882FG=y
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
CONFIG_SENSORS_GL518SM=y
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_GPIO_FAN=y
CONFIG_SENSORS_CORETEMP=y
# CONFIG_SENSORS_IBMAEM is not set
# CONFIG_SENSORS_IBMPEX is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
CONFIG_SENSORS_LINEAGE=y
CONFIG_SENSORS_LM63=y
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
CONFIG_SENSORS_LM78=y
CONFIG_SENSORS_LM80=y
CONFIG_SENSORS_LM83=y
CONFIG_SENSORS_LM85=y
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LTC4151 is not set
CONFIG_SENSORS_LTC4215=y
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4261 is not set
CONFIG_SENSORS_LM95241=y
CONFIG_SENSORS_LM95245=y
CONFIG_SENSORS_MAX16065=y
CONFIG_SENSORS_MAX1619=y
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX6639 is not set
CONFIG_SENSORS_MAX6642=y
# CONFIG_SENSORS_MAX6650 is not set
CONFIG_SENSORS_NTC_THERMISTOR=y
# CONFIG_SENSORS_PC87360 is not set
CONFIG_SENSORS_PC87427=y
CONFIG_SENSORS_PCF8591=y
# CONFIG_PMBUS is not set
CONFIG_SENSORS_SHT15=y
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMM665 is not set
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_EMC1403=y
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
CONFIG_SENSORS_SCH56XX_COMMON=y
CONFIG_SENSORS_SCH5627=y
CONFIG_SENSORS_SCH5636=y
# CONFIG_SENSORS_ADS1015 is not set
CONFIG_SENSORS_ADS7828=y
CONFIG_SENSORS_AMC6821=y
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_TMP102=y
CONFIG_SENSORS_TMP401=y
CONFIG_SENSORS_TMP421=y
CONFIG_SENSORS_VIA_CPUTEMP=y
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SENSORS_VT1211=y
CONFIG_SENSORS_VT8231=y
# CONFIG_SENSORS_W83781D is not set
CONFIG_SENSORS_W83791D=y
# CONFIG_SENSORS_W83792D is not set
CONFIG_SENSORS_W83795=y
CONFIG_SENSORS_W83795_FANCTRL=y
# CONFIG_SENSORS_W83L785TS is not set
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_W83627EHF=y
CONFIG_SENSORS_APPLESMC=y
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_SILENT is not set
CONFIG_SSB_DEBUG=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
CONFIG_BCMA=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
# CONFIG_BCMA_HOST_PCI is not set
# CONFIG_BCMA_DEBUG is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_88PM860X is not set
CONFIG_MFD_SM501=y
# CONFIG_MFD_SM501_GPIO is not set
CONFIG_HTC_PASIC3=y
# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS6105X is not set
CONFIG_TPS65010=y
CONFIG_TPS6507X=y
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
CONFIG_MFD_STMPE=y

#
# STMPE Interface Drivers
#
CONFIG_STMPE_I2C=y
CONFIG_MFD_TC3589X=y
# CONFIG_MFD_TMIO is not set
CONFIG_PMIC_DA903X=y
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_I2C=y
# CONFIG_PMIC_ADP5520 is not set
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_S5M_CORE is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
CONFIG_MFD_WM8994=y
# CONFIG_MFD_PCF50633 is not set
# CONFIG_ABX500_CORE is not set
CONFIG_MFD_CS5535=y
CONFIG_MFD_TIMBERDALE=y
CONFIG_LPC_SCH=y
CONFIG_MFD_RDC321X=y
CONFIG_MFD_JANZ_CMODIO=y
CONFIG_MFD_VX855=y
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_AAT2870_CORE is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
# CONFIG_REGULATOR_DUMMY is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
# CONFIG_REGULATOR_GPIO is not set
# CONFIG_REGULATOR_BQ24022 is not set
CONFIG_REGULATOR_MAX1586=y
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8925 is not set
CONFIG_REGULATOR_MAX8952=y
# CONFIG_REGULATOR_MAX8997 is not set
CONFIG_REGULATOR_WM8994=y
# CONFIG_REGULATOR_DA903X is not set
# CONFIG_REGULATOR_DA9052 is not set
CONFIG_REGULATOR_LP3971=y
CONFIG_REGULATOR_LP3972=y
CONFIG_REGULATOR_TPS65023=y
# CONFIG_REGULATOR_TPS6507X is not set
CONFIG_REGULATOR_TPS65912=y
CONFIG_REGULATOR_ISL6271A=y
CONFIG_REGULATOR_AD5398=y
# CONFIG_REGULATOR_TPS6586X is not set
CONFIG_REGULATOR_TPS65910=y
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
CONFIG_AGP_VIA=y
# CONFIG_VGA_ARB is not set
# CONFIG_DRM is not set
# CONFIG_STUB_POULSBO is not set
CONFIG_VGASTATE=y
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
# CONFIG_FB_WMT_GE_ROPS is not set
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=y
CONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_PM2=y
CONFIG_FB_PM2_FIFO_DISCONNECT=y
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_ARC=y
# CONFIG_FB_IMSTT is not set
CONFIG_FB_N411=y
# CONFIG_FB_HGA is not set
CONFIG_FB_S1D13XXX=y
# CONFIG_FB_NVIDIA is not set
CONFIG_FB_RIVA=y
CONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
# CONFIG_FB_RIVA_BACKLIGHT is not set
CONFIG_FB_LE80578=y
# CONFIG_FB_CARILLO_RANCH is not set
# CONFIG_FB_INTEL is not set
CONFIG_FB_MATROX=y
# CONFIG_FB_MATROX_MILLENIUM is not set
# CONFIG_FB_MATROX_MYSTIQUE is not set
# CONFIG_FB_MATROX_G is not set
CONFIG_FB_MATROX_I2C=y
CONFIG_FB_ATY128=y
CONFIG_FB_ATY128_BACKLIGHT=y
# CONFIG_FB_ATY is not set
CONFIG_FB_S3=y
CONFIG_FB_S3_DDC=y
CONFIG_FB_SAVAGE=y
CONFIG_FB_SAVAGE_I2C=y
# CONFIG_FB_SAVAGE_ACCEL is not set
CONFIG_FB_SIS=y
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
CONFIG_FB_KYRO=y
# CONFIG_FB_3DFX is not set
CONFIG_FB_VOODOO1=y
CONFIG_FB_VT8623=y
# CONFIG_FB_TRIDENT is not set
CONFIG_FB_ARK=y
# CONFIG_FB_PM3 is not set
CONFIG_FB_CARMINE=y
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_LX=y
CONFIG_FB_GEODE_GX=y
CONFIG_FB_GEODE_GX1=y
# CONFIG_FB_TMIO is not set
CONFIG_FB_SM501=y
CONFIG_FB_SMSCUFX=y
CONFIG_FB_UDL=y
# CONFIG_FB_METRONOME is not set
CONFIG_FB_MB862XX=y
CONFIG_FB_MB862XX_PCI_GDC=y
# CONFIG_FB_MB862XX_I2C is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_DA903X is not set
# CONFIG_BACKLIGHT_MAX8925 is not set
CONFIG_BACKLIGHT_SAHARA=y
# CONFIG_BACKLIGHT_ADP8860 is not set
CONFIG_BACKLIGHT_ADP8870=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
# CONFIG_LOGO is not set
CONFIG_SOUND=y
# CONFIG_SOUND_OSS_CORE is not set
# CONFIG_SND is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
# CONFIG_HIDRAW is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_MOUSE=y

#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
# CONFIG_HID_CHICONY is not set
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=y
# CONFIG_HID_ELECOM is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_HOLTEK=y
CONFIG_HOLTEK_FF=y
CONFIG_HID_KEYTOUCH=y
CONFIG_HID_KYE=y
CONFIG_HID_UCLOGIC=y
CONFIG_HID_WALTOP=y
# CONFIG_HID_GYRATION is not set
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=y
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
CONFIG_HID_MICROSOFT=y
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=y
# CONFIG_HID_PANTHERLORD is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_PICOLCD=y
# CONFIG_HID_PICOLCD_FB is not set
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PRIMAX=y
CONFIG_HID_ROCCAT=y
CONFIG_HID_ROCCAT_COMMON=y
# CONFIG_HID_ROCCAT_ARVO is not set
CONFIG_HID_ROCCAT_ISKU=y
CONFIG_HID_ROCCAT_KONE=y
# CONFIG_HID_ROCCAT_KONEPLUS is not set
# CONFIG_HID_ROCCAT_KOVAPLUS is not set
# CONFIG_HID_ROCCAT_PYRA is not set
# CONFIG_HID_SAMSUNG is not set
CONFIG_HID_SONY=y
# CONFIG_HID_SPEEDLINK is not set
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
CONFIG_USB_OTG=y
CONFIG_USB_OTG_WHITELIST=y
CONFIG_USB_OTG_BLACKLIST_HUB=y
# CONFIG_USB_MON is not set
CONFIG_USB_WUSB=y
CONFIG_USB_WUSB_CBAF=y
CONFIG_USB_WUSB_CBAF_DEBUG=y

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_HCD_DEBUGGING=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_MV=y
CONFIG_USB_OXU210HP_HCD=y
CONFIG_USB_ISP116X_HCD=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1362_HCD=y
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_U132_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
CONFIG_USB_HWA_HCD=y

#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_STORAGE is not set
CONFIG_USB_UAS=y
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB port drivers
#
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
CONFIG_USB_SERIAL_BELKIN=y
# CONFIG_USB_SERIAL_CH341 is not set
CONFIG_USB_SERIAL_WHITEHEAT=y
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
CONFIG_USB_SERIAL_EMPEG=y
CONFIG_USB_SERIAL_FTDI_SIO=y
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
CONFIG_USB_SERIAL_IR=y
# CONFIG_USB_SERIAL_EDGEPORT is not set
CONFIG_USB_SERIAL_EDGEPORT_TI=y
CONFIG_USB_SERIAL_GARMIN=y
CONFIG_USB_SERIAL_IPW=y
# CONFIG_USB_SERIAL_IUU is not set
CONFIG_USB_SERIAL_KEYSPAN_PDA=y
# CONFIG_USB_SERIAL_KEYSPAN is not set
CONFIG_USB_SERIAL_KLSI=y
CONFIG_USB_SERIAL_KOBIL_SCT=y
CONFIG_USB_SERIAL_MCT_U232=y
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=y
# CONFIG_USB_SERIAL_OTI6858 is not set
CONFIG_USB_SERIAL_QCAUX=y
# CONFIG_USB_SERIAL_QUALCOMM is not set
CONFIG_USB_SERIAL_SPCP8X5=y
# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_SAFE=y
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIEMENS_MPI=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=y
# CONFIG_USB_SERIAL_SYMBOL is not set
CONFIG_USB_SERIAL_TI=y
CONFIG_USB_SERIAL_CYBERJACK=y
# CONFIG_USB_SERIAL_XIRCOM is not set
CONFIG_USB_SERIAL_WWAN=y
# CONFIG_USB_SERIAL_OPTION is not set
CONFIG_USB_SERIAL_OMNINET=y
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
# CONFIG_USB_SERIAL_ZIO is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
CONFIG_USB_SEVSEG=y
CONFIG_USB_RIO500=y
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
CONFIG_USB_CYPRESS_CY7C63=y
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=y
CONFIG_USB_FTDI_ELAN=y
CONFIG_USB_APPLEDISPLAY=y
CONFIG_USB_SISUSBVGA=y
# CONFIG_USB_SISUSBVGA_CON is not set
CONFIG_USB_LD=y
CONFIG_USB_TRANCEVIBRATOR=y
CONFIG_USB_IOWARRIOR=y
CONFIG_USB_TEST=y
CONFIG_USB_ISIGHTFW=y
CONFIG_USB_YUREX=y
# CONFIG_USB_GADGET is not set

#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
CONFIG_USB_GPIO_VBUS=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_UWB=y
CONFIG_UWB_HWA=y
# CONFIG_UWB_WHCI is not set
# CONFIG_UWB_I1480U is not set
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
# CONFIG_MMC_UNSAFE_RESUME is not set
# CONFIG_MMC_CLKGATE is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
CONFIG_MMC_TEST=y

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PCI=y
# CONFIG_MMC_RICOH_MMC is not set
# CONFIG_MMC_SDHCI_PLTFM is not set
# CONFIG_MMC_TIFM_SD is not set
CONFIG_MMC_SDRICOH_CS=y
CONFIG_MMC_CB710=y
CONFIG_MMC_VIA_SDMMC=y
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y

#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
# CONFIG_MSPRO_BLOCK is not set

#
# MemoryStick Host Controller Drivers
#
# CONFIG_MEMSTICK_TIFM_MS is not set
# CONFIG_MEMSTICK_JMICRON_38X is not set
# CONFIG_MEMSTICK_R592 is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
CONFIG_LEDS_LM3530=y
CONFIG_LEDS_PCA9532=y
CONFIG_LEDS_PCA9532_GPIO=y
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_LP3944 is not set
CONFIG_LEDS_LP5521=y
# CONFIG_LEDS_LP5523 is not set
CONFIG_LEDS_PCA955X=y
# CONFIG_LEDS_DA903X is not set
# CONFIG_LEDS_REGULATOR is not set
CONFIG_LEDS_BD2802=y
# CONFIG_LEDS_LT3593 is not set
CONFIG_LEDS_TCA6507=y
# CONFIG_LEDS_MAX8997 is not set
CONFIG_LEDS_OT200=y
# CONFIG_LEDS_TRIGGERS is not set

#
# LED Triggers
#
CONFIG_ACCESSIBILITY=y
# CONFIG_A11Y_BRAILLE_CONSOLE is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
# CONFIG_INTEL_MID_DMAC is not set
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_TIMB_DMA is not set
# CONFIG_PCH_DMA is not set
CONFIG_AUXDISPLAY=y
CONFIG_UIO=y
CONFIG_UIO_CIF=y
CONFIG_UIO_PDRV=y
# CONFIG_UIO_PDRV_GENIRQ is not set
CONFIG_UIO_AEC=y
CONFIG_UIO_SERCOS3=y
# CONFIG_UIO_PCI_GENERIC is not set
# CONFIG_UIO_NETX is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y

#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_X86_PLATFORM_DEVICES is not set

#
# Hardware Spinlock drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_CLKBLD_I8253=y
# CONFIG_IOMMU_SUPPORT is not set
# CONFIG_VIRT_DRIVERS is not set
CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
# CONFIG_DEVFREQ_GOV_USERSPACE is not set

#
# DEVFREQ Drivers
#

#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_EDD_OFF is not set
# CONFIG_FIRMWARE_MEMMAP is not set
# CONFIG_DELL_RBU is not set
CONFIG_DCDBAS=y
CONFIG_ISCSI_IBFT_FIND=y
# CONFIG_ISCSI_IBFT is not set
CONFIG_GOOGLE_FIRMWARE=y

#
# Google Firmware Drivers
#

#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT23=y
CONFIG_EXT4_FS_XATTR=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=y
# CONFIG_JFS_POSIX_ACL is not set
CONFIG_JFS_SECURITY=y
CONFIG_JFS_DEBUG=y
# CONFIG_JFS_STATISTICS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
CONFIG_OCFS2_FS=y
# CONFIG_OCFS2_FS_O2CB is not set
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=y
CONFIG_OCFS2_FS_STATS=y
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_NILFS2_FS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QUOTA_DEBUG=y
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=y
# CONFIG_ECRYPT_FS is not set
CONFIG_HFS_FS=y
CONFIG_HFSPLUS_FS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
CONFIG_EFS_FS=y
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=y
# CONFIG_SQUASHFS_XATTR is not set
CONFIG_SQUASHFS_ZLIB=y
# CONFIG_SQUASHFS_LZO is not set
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=y
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=y
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
CONFIG_NFSD=y
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
CONFIG_AFS_FS=y
# CONFIG_AFS_DEBUG is not set
CONFIG_9P_FS=y
CONFIG_9P_FS_POSIX_ACL=y
CONFIG_NLS=y
CONFIG_NLS_BASE=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
# CONFIG_NLS_CODEPAGE_865 is not set
CONFIG_NLS_CODEPAGE_866=y
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
CONFIG_NLS_ISO8859_14=y
# CONFIG_NLS_ISO8859_15 is not set
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_UTF8=y
CONFIG_DLM=y
# CONFIG_DLM_DEBUG is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_SPARSE_RCU_POINTER is not set
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_DEBUG_LIST=y
CONFIG_TEST_LIST_SORT=y
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
CONFIG_RCU_TORTURE_TEST=y
# CONFIG_RCU_TORTURE_TEST_RUNNABLE is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_BACKTRACE_SELF_TEST=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
CONFIG_DEBUG_PER_CPU_MAPS=y
# CONFIG_LKDTM is not set
CONFIG_CPU_NOTIFIER_ERROR_INJECT=y
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_WANT_PAGE_DEBUG_FLAGS=y
CONFIG_PAGE_GUARD=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
CONFIG_FIREWIRE_OHCI_REMOTE_DMA=y
CONFIG_BUILD_DOCSRC=y
CONFIG_DYNAMIC_DEBUG=y
# CONFIG_DMA_API_DEBUG is not set
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_SAMPLES=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
CONFIG_KGDB_TESTS=y
CONFIG_KGDB_LOW_LEVEL_TRAP=y
# CONFIG_KGDB_KDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_IOMMU_DEBUG is not set
CONFIG_IOMMU_STRESS=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
CONFIG_IO_DELAY_UDELAY=y
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=2
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
CONFIG_DEBUG_NMI_SELFTEST=y

#
# Security options
#
CONFIG_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
# CONFIG_SECURITY_SELINUX_DISABLE is not set
# CONFIG_SECURITY_SELINUX_DEVELOP is not set
# CONFIG_SECURITY_SELINUX_AVC_STATS is not set
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
CONFIG_SECURITY_TOMOYO=y
CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048
CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024
CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init"
CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init"
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
# CONFIG_IMA is not set
CONFIG_EVM=y
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_APPARMOR=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="apparmor"
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_GF128MUL=y
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_PCRYPT=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=y

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_GHASH=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA1_SSSE3 is not set
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=y

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_AES_NI_INTEL=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
CONFIG_CRYPTO_BLOWFISH_X86_64=y
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
CONFIG_CRYPTO_SALSA20_X86_64=y
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=y
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=y

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
# CONFIG_KVM_AMD is not set
# CONFIG_VHOST_NET is not set
# CONFIG_BINARY_PRINTF is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
# CONFIG_XZ_DEC_POWERPC is not set
# CONFIG_XZ_DEC_IA64 is not set
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
# CONFIG_XZ_DEC_SPARC is not set
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_AVERAGE=y
CONFIG_CORDIC=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_FORCE_SUCCESSFUL_BUILD=y
CONFIG_FORCE_MINIMAL_CONFIG=y
CONFIG_FORCE_MINIMAL_CONFIG_64=y
CONFIG_FORCE_MINIMAL_CONFIG_PHYS=y

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [PATCH 0/5 v2] [GIT PULL] x86/jump label: Paranoid checks and 2 or 5 byte nops
  2012-01-31 19:48     ` Ingo Molnar
@ 2012-02-01  5:08       ` Steven Rostedt
  2012-02-01  8:05         ` Ingo Molnar
  0 siblings, 1 reply; 22+ messages in thread
From: Steven Rostedt @ 2012-02-01  5:08 UTC (permalink / raw)
  To: Ingo Molnar
  Cc: linux-kernel, Andrew Morton, Jason Baron, H. Peter Anvin,
	Frederic Weisbecker

On Tue, 2012-01-31 at 20:48 +0100, Ingo Molnar wrote:

> Attached. (you need to run it through make oldconfig and use the 
> defaults.)

Hmm, I'm not able to reproduce it.

Could you apply this patch and run it again. I'm interested in what was
at the location when it tried to do the conversion.

Thanks!

-- Steve

diff --git a/arch/x86/kernel/jump_label.c b/arch/x86/kernel/jump_label.c
index 6173ca6..da12264 100644
--- a/arch/x86/kernel/jump_label.c
+++ b/arch/x86/kernel/jump_label.c
@@ -58,13 +58,17 @@ static void __jump_label_transform(struct jump_entry *entry,
 			size = JUMP_LABEL_NOP_SIZE;
 			code.jump = 0xe9;
 			code.offset = entry->target - (entry->code + size);
-		} else
+		} else {
+			unsigned char *ins = ip;
 			/*
 			 * The location is not a nop that we were expecting,
 			 * something went wrong. Crash the box, as something could be
 			 * corrupting the kernel.
 			 */
+			printk("Unknown op at %pS (%02x:%02x:%02x:%02x:%02x)\n",
+			       ip, ins[0], ins[1], ins[2], ins[3], ins[4]);
 			BUG();
+		}
 	} else {
 		/*
 		 * We are disabling this jump label. If it is not what



^ permalink raw reply related	[flat|nested] 22+ messages in thread

* Re: [PATCH 0/5 v2] [GIT PULL] x86/jump label: Paranoid checks and 2 or 5 byte nops
  2012-02-01  5:08       ` Steven Rostedt
@ 2012-02-01  8:05         ` Ingo Molnar
  2012-02-01 13:20           ` Steven Rostedt
  2012-02-01 15:21           ` Steven Rostedt
  0 siblings, 2 replies; 22+ messages in thread
From: Ingo Molnar @ 2012-02-01  8:05 UTC (permalink / raw)
  To: Steven Rostedt
  Cc: linux-kernel, Andrew Morton, Jason Baron, H. Peter Anvin,
	Frederic Weisbecker


* Steven Rostedt <rostedt@goodmis.org> wrote:

> On Tue, 2012-01-31 at 20:48 +0100, Ingo Molnar wrote:
> 
> > Attached. (you need to run it through make oldconfig and use the 
> > defaults.)
> 
> Hmm, I'm not able to reproduce it.
> 
> Could you apply this patch and run it again. I'm interested in what was
> at the location when it tried to do the conversion.
> 
> Thanks!
> 
> -- Steve
> 
> diff --git a/arch/x86/kernel/jump_label.c b/arch/x86/kernel/jump_label.c
> index 6173ca6..da12264 100644
> --- a/arch/x86/kernel/jump_label.c
> +++ b/arch/x86/kernel/jump_label.c
> @@ -58,13 +58,17 @@ static void __jump_label_transform(struct jump_entry *entry,
>  			size = JUMP_LABEL_NOP_SIZE;
>  			code.jump = 0xe9;
>  			code.offset = entry->target - (entry->code + size);
> -		} else
> +		} else {
> +			unsigned char *ins = ip;
>  			/*
>  			 * The location is not a nop that we were expecting,
>  			 * something went wrong. Crash the box, as something could be
>  			 * corrupting the kernel.
>  			 */
> +			printk("Unknown op at %pS (%02x:%02x:%02x:%02x:%02x)\n",
> +			       ip, ins[0], ins[1], ins[2], ins[3], ins[4]);
>  			BUG();
> +		}

It would be better to make this a regular commit, this kind of 
diagnostics obviously makes sense. That way i could pull in your 
updated branch for more testing.

Thanks,

	Ingo

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [PATCH 0/5 v2] [GIT PULL] x86/jump label: Paranoid checks and 2 or 5 byte nops
  2012-02-01  8:05         ` Ingo Molnar
@ 2012-02-01 13:20           ` Steven Rostedt
  2012-02-01 15:21           ` Steven Rostedt
  1 sibling, 0 replies; 22+ messages in thread
From: Steven Rostedt @ 2012-02-01 13:20 UTC (permalink / raw)
  To: Ingo Molnar
  Cc: linux-kernel, Andrew Morton, Jason Baron, H. Peter Anvin,
	Frederic Weisbecker

On Wed, 2012-02-01 at 09:05 +0100, Ingo Molnar wrote:

> It would be better to make this a regular commit, this kind of 
> diagnostics obviously makes sense. That way i could pull in your 
> updated branch for more testing.

Actually, I was planing on doing that ;-) I just didn't have the time to
push it through my normal testing.

I'm also curious if you get a bug with only patches 1,2, and 3. That is,
the current jump label doesn't do any testing. It would be interesting
to know if something is happening with the current jump label code that
we do not expect.

-- Steve

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [PATCH 0/5 v2] [GIT PULL] x86/jump label: Paranoid checks and 2 or 5 byte nops
  2012-02-01  8:05         ` Ingo Molnar
  2012-02-01 13:20           ` Steven Rostedt
@ 2012-02-01 15:21           ` Steven Rostedt
  2012-02-02 13:51             ` Ingo Molnar
  1 sibling, 1 reply; 22+ messages in thread
From: Steven Rostedt @ 2012-02-01 15:21 UTC (permalink / raw)
  To: Ingo Molnar
  Cc: linux-kernel, Andrew Morton, Jason Baron, H. Peter Anvin,
	Frederic Weisbecker

On Wed, 2012-02-01 at 09:05 +0100, Ingo Molnar wrote:
> * Steven Rostedt <rostedt@goodmis.org> wrote:

> It would be better to make this a regular commit, this kind of 
> diagnostics obviously makes sense. That way i could pull in your 
> updated branch for more testing.


Ingo,

I added the below patch on top of my previous pull request. If you run
this on the box that failed, it should give us a little more info.

Thanks!

Please pull the latest tip/perf/jump-label-3 tree, which can be found at:

  git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace.git
tip/perf/jump-label-3

Head SHA1: abdefd743e4a28f11bcd38a441253f01dafea03e


Steven Rostedt (1):
      x86/jump lables: Show where and what was wrong on errors

----
 arch/x86/kernel/jump_label.c |   31 +++++++++++++++++++++----------
 1 files changed, 21 insertions(+), 10 deletions(-)
---------------------------
commit abdefd743e4a28f11bcd38a441253f01dafea03e
Author: Steven Rostedt <srostedt@redhat.com>
Date:   Wed Feb 1 09:59:24 2012 -0500

    x86/jump lables: Show where and what was wrong on errors
    
    When modifying text sections for jump labels, a paranoid check is
    performed. If the check fails, the system "bugs". But why it failed
    is not shown.
    
    The BUG_ON()s in the jump label update code is replaced with bug_at(ip).
    This is a function that will show what pointer failed, and what was
    at the location of the failure that made jump label panic.
    
    Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

diff --git a/arch/x86/kernel/jump_label.c b/arch/x86/kernel/jump_label.c
index 7112a27..2839524 100644
--- a/arch/x86/kernel/jump_label.c
+++ b/arch/x86/kernel/jump_label.c
@@ -32,6 +32,18 @@ union jump_code_union {
 	} __packed;
 };
 
+static void bug_at(unsigned char *ip, int line)
+{
+	/*
+	 * The location is not an op that we were expecting.
+	 * Something went wrong. Crash the box, as something could be
+	 * corrupting the kernel.
+	 */
+	printk("Unexpected op at %pS [%p] (%02x %02x %02x %02x %02x) %s:%d\n",
+	       ip, ip, ip[0], ip[1], ip[2], ip[3], ip[4], __FILE__, line);
+	BUG();
+}
+
 static void __jump_label_transform(struct jump_entry *entry,
 				   enum jump_label_type type,
 				   void *(*poker)(void *, const void *, size_t),
@@ -59,12 +71,7 @@ static void __jump_label_transform(struct jump_entry *entry,
 			code.jump = 0xe9;
 			code.offset = entry->target - (entry->code + size);
 		} else
-			/*
-			 * The location is not a nop that we were expecting,
-			 * something went wrong. Crash the box, as something could be
-			 * corrupting the kernel.
-			 */
-			BUG();
+			bug_at(ip, __LINE__);
 	} else {
 		/*
 		 * We are disabling this jump label. If it is not what
@@ -78,7 +85,8 @@ static void __jump_label_transform(struct jump_entry *entry,
 				return;
 
 			/* We are initializing from the default nop */
-			BUG_ON(memcmp(ip, default_nop, 5) != 0);
+			if (unlikely(memcmp(ip, default_nop, 5) != 0))
+				bug_at(ip, __LINE__);
 
 			/* Set to the ideal nop */
 			size = JUMP_LABEL_NOP_SIZE;
@@ -91,7 +99,9 @@ static void __jump_label_transform(struct jump_entry *entry,
 			code.jump = 0xe9;
 			code.offset = entry->target -
 				(entry->code + JUMP_LABEL_NOP_SIZE);
-			BUG_ON(memcmp(ip, &code, 5) != 0);
+
+			if (unlikely(memcmp(ip, &code, 5) != 0))
+				bug_at(ip, __LINE__);
 
 			size = JUMP_LABEL_NOP_SIZE;
 			memcpy(&code, ideal_nops[NOP_ATOMIC5], size);
@@ -101,13 +111,14 @@ static void __jump_label_transform(struct jump_entry *entry,
 			/* Had better be a 2 byte jmp */
 			code.jump_short = 0xeb;
 			code.offset = entry->target - (entry->code + 2);
-			BUG_ON(memcmp(ip, &code, 2) != 0);
+			if (unlikely(memcmp(ip, &code, 2) != 0))
+				bug_at(ip, __LINE__);
 
 			size = 2;
 			memcpy(&code, nop_short, size);
 		} else
 			/* The code was not what we expected!  */
-			BUG();
+			bug_at(ip, __LINE__);
 	}
 
 	(*poker)(ip, &code, size);



^ permalink raw reply related	[flat|nested] 22+ messages in thread

* Re: [PATCH 0/5 v2] [GIT PULL] x86/jump label: Paranoid checks and 2 or 5 byte nops
  2012-02-01 15:21           ` Steven Rostedt
@ 2012-02-02 13:51             ` Ingo Molnar
  2012-02-02 14:10               ` H. Peter Anvin
  0 siblings, 1 reply; 22+ messages in thread
From: Ingo Molnar @ 2012-02-02 13:51 UTC (permalink / raw)
  To: Steven Rostedt
  Cc: linux-kernel, Andrew Morton, Jason Baron, H. Peter Anvin,
	Frederic Weisbecker


* Steven Rostedt <rostedt@goodmis.org> wrote:

> On Wed, 2012-02-01 at 09:05 +0100, Ingo Molnar wrote:
> > * Steven Rostedt <rostedt@goodmis.org> wrote:
> 
> > It would be better to make this a regular commit, this kind of 
> > diagnostics obviously makes sense. That way i could pull in your 
> > updated branch for more testing.
> 
> 
> Ingo,
> 
> I added the below patch on top of my previous pull request. If 
> you run this on the box that failed, it should give us a 
> little more info.

Ok, here's the new debug output:

[    0.000000] Unexpected op at enqueue_task_fair+0xab/0x1fb [ffffffff81078a8d] (0f 1f 44 00 00) arch/x86/kernel/jump_label.c:74
PANIC: early exception 06 rip 10:ffffffff81a1d5f5 error 0 cr2 f06f53

(below is the full bootlog.)

Thanks,

	Ingo

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.3.0-rc2-tip+ (mingo@earth5) (gcc version 4.7.0 20120112 (Red Hat 4.7.0-0.6) (GCC) ) #171448 SMP Thu Feb 2 13:22:44 CET 2012
[    0.000000] Command line: root=/dev/sda6 earlyprintk=ttyS0,115200 console=ttyS0,115200 debug initcall_debug sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=1 panic=1 3
[    0.000000] KERNEL supported cpus:
[    0.000000]   AMD AuthenticAMD
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[    0.000000]  BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFC0000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [ffff8800000f5680] f5680
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff88000009d000] 9d000 size 8192
[    0.000000] init_memory_mapping: 0000000000000000-000000003fff0000
[    0.000000]  0000000000 - 003fff0000 page 4k
[    0.000000] kernel direct mapping tables up to 3fff0000 @ 1fdfe000-20000000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000003fff0000
[    0.000000] Initmem setup node 0 0000000000000000-000000003fff0000
[    0.000000]   NODE_DATA [000000003ffe1000 - 000000003ffeffff]
[    0.000000]  [ffffea0000000000-ffffea0000ffffff] PMD -> [ffff88003e600000-ffff88003f5fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] Early memory PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003fff0
[    0.000000] On node 0 totalpages: 262015
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 2 pages reserved
[    0.000000]   DMA zone: 3917 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 4032 pages used for memmap
[    0.000000]   DMA32 zone: 254000 pages, LIFO batch:31
[    0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[    0.000000] Intel MultiProcessor Specification v1.4
[    0.000000] MPTABLE: OEM ID: OEM00000
[    0.000000] MPTABLE: Product ID: PROD00000000
[    0.000000] MPTABLE: APIC at: 0xFEE00000
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] Processor #1
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] Processors: 2
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 25 pages/cpu @ffff88003fc00000 s78224 r0 d24176 u1048576
[    0.000000] pcpu-alloc: s78224 r0 d24176 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 257917
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=/dev/sda6 earlyprintk=ttyS0,115200 console=ttyS0,115200 debug initcall_debug sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=1 panic=1 3
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] Unexpected op at enqueue_task_fair+0xab/0x1fb [ffffffff81078a8d] (0f 1f 44 00 00) arch/x86/kernel/jump_label.c:74
PANIC: early exception 06 rip 10:ffffffff81a1d5f5 error 0 cr2 f06f53
[    0.000000] Pid: 0, comm: swapper Not tainted 3.3.0-rc2-tip+ #171448
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81a1d5f5>] ? bug_at+0x45/0x47
[    0.000000]  [<ffffffff81078a8d>] ? enqueue_task_fair+0xab/0x1fb
[    0.000000]  [<ffffffff8200619e>] early_idt_handler+0x5e/0x71
[    0.000000]  [<ffffffff81a1d5f5>] ? bug_at+0x45/0x47
[    0.000000]  [<ffffffff81a1d5f5>] ? bug_at+0x45/0x47
[    0.000000]  [<ffffffff81025ad0>] __jump_label_transform+0xc8/0x169
[    0.000000]  [<ffffffff820088dc>] arch_jump_label_transform_static+0x6a/0x6f
[    0.000000]  [<ffffffff8201b4ff>] jump_label_init+0x69/0x91
[    0.000000]  [<ffffffff82006970>] start_kernel+0x1b5/0x349
[    0.000000]  [<ffffffff82006277>] x86_64_start_reservations+0x7e/0x82
[    0.000000]  [<ffffffff820063c1>] x86_64_start_kernel+0x146/0x153
[    0.000000] RIP bug_at+0x45/0x47

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [PATCH 0/5 v2] [GIT PULL] x86/jump label: Paranoid checks and 2 or 5 byte nops
  2012-02-02 13:51             ` Ingo Molnar
@ 2012-02-02 14:10               ` H. Peter Anvin
  2012-02-02 14:31                 ` Steven Rostedt
  0 siblings, 1 reply; 22+ messages in thread
From: H. Peter Anvin @ 2012-02-02 14:10 UTC (permalink / raw)
  To: Ingo Molnar
  Cc: Steven Rostedt, linux-kernel, Andrew Morton, Jason Baron,
	Frederic Weisbecker

On 02/02/2012 05:51 AM, Ingo Molnar wrote:
> [    0.000000] Unexpected op at enqueue_task_fair+0xab/0x1fb [ffffffff81078a8d] (0f 1f 44 00 00) arch/x86/kernel/jump_label.c:74

So this is presumably the expected NOP... what was it expecting instead?

	-hpa

-- 
H. Peter Anvin, Intel Open Source Technology Center
I work for Intel.  I don't speak on their behalf.


^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [PATCH 0/5 v2] [GIT PULL] x86/jump label: Paranoid checks and 2 or 5 byte nops
  2012-02-02 14:10               ` H. Peter Anvin
@ 2012-02-02 14:31                 ` Steven Rostedt
  2012-02-02 22:04                   ` Steven Rostedt
  2012-02-03  7:36                   ` Ingo Molnar
  0 siblings, 2 replies; 22+ messages in thread
From: Steven Rostedt @ 2012-02-02 14:31 UTC (permalink / raw)
  To: H. Peter Anvin
  Cc: Ingo Molnar, linux-kernel, Andrew Morton, Jason Baron,
	Frederic Weisbecker

On Thu, 2012-02-02 at 06:10 -0800, H. Peter Anvin wrote:
> On 02/02/2012 05:51 AM, Ingo Molnar wrote:
> > [    0.000000] Unexpected op at enqueue_task_fair+0xab/0x1fb [ffffffff81078a8d] (0f 1f 44 00 00) arch/x86/kernel/jump_label.c:74
> 
> So this is presumably the expected NOP... what was it expecting instead?

It's expecting the "ideal_nop" that was determined at run time.

This code died on "enabling" the nop. I think the code now enables some
nops by default on boot up, which doesn't expect to see the
"default_nop".

I need to look at the code to see why it is enabling the nop this early.
I think there were patches out there to enable jump labels on boot up,
but I didn't think they were included yet.

But I have a good idea of what is happening.

Which explains why my box didn't trigger this bug. The one box that can
boot tip/master has the ideal_nop the same as the default_nop.

I'm still working on getting my other box to boot. I'm still hunting
down the patch in "out-of-tree" that prevents it from booting. This was
a pain, because the mainline commit that the "out-of-tree" was based on
contained another bug that prevented this box to boot. I just finished a
ktest reverse bisect on the mainline branch to find that bug:

commit 124482935fb7fb9303c8a8ab930149c6a93d9910
Author: Andi Kleen <andi@firstfloor.org>
Date:   Fri Jun 18 23:09:00 2010 +0200

    x86: Fix vsyscall on gcc 4.5 with -Os

Now I'm running a ktest bisect on the out-of-tree branch to find the
commit that prevents this box from booting. (there's a PRE_BUILD and
POST_BUILD option that lets me apply this patch at ever bisect :-)

-- Steve

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [PATCH 0/5 v2] [GIT PULL] x86/jump label: Paranoid checks and 2 or 5 byte nops
  2012-02-02 14:31                 ` Steven Rostedt
@ 2012-02-02 22:04                   ` Steven Rostedt
  2012-02-02 22:07                     ` H. Peter Anvin
  2012-02-03  7:36                   ` Ingo Molnar
  1 sibling, 1 reply; 22+ messages in thread
From: Steven Rostedt @ 2012-02-02 22:04 UTC (permalink / raw)
  To: H. Peter Anvin
  Cc: Ingo Molnar, linux-kernel, Andrew Morton, Jason Baron,
	Frederic Weisbecker

[-- Attachment #1: Type: text/plain, Size: 2284 bytes --]

On Thu, 2012-02-02 at 09:31 -0500, Steven Rostedt wrote:

> This code died on "enabling" the nop. I think the code now enables some
> nops by default on boot up, which doesn't expect to see the
> "default_nop".
> 

Ah, we do have jump labels that are default on. I'm still not triggering
these, I'm not sure why. Perhaps a command line difference?

Anyway, this should fix the bug:

-- Steve


Ingo,

Please pull the latest tip/perf/jump-label-4 tree, which can be found at:

  git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace.git
tip/perf/jump-label-4

Head SHA1: 7bbd9688727dd30cd44b90b3c9c35f0f66af77ff


Steven Rostedt (1):
      x86/jump labels: Handle initialization of enabled nops

----
 arch/x86/kernel/jump_label.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)
---------------------------
commit 7bbd9688727dd30cd44b90b3c9c35f0f66af77ff
Author: Steven Rostedt <srostedt@redhat.com>
Date:   Thu Feb 2 16:55:43 2012 -0500

    x86/jump labels: Handle initialization of enabled nops
    
    When jump labels are initialized at boot up, they are compared
    to the default_nop before switching to the ideal nop.
    
    But if a jump label is enabled by default on start up, the
    enabled code does not test against the default nop, only the
    ideal nop. But as this jump label has not been converted to the
    ideal nop, it fails the check, and will crash the box.
    
    The enabled path needs to be aware of initialization too.
    
    Reported-by: Ingo Molnar <mingo@elte.hu>
    Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

diff --git a/arch/x86/kernel/jump_label.c b/arch/x86/kernel/jump_label.c
index 2839524..d560c80 100644
--- a/arch/x86/kernel/jump_label.c
+++ b/arch/x86/kernel/jump_label.c
@@ -66,7 +66,8 @@ static void __jump_label_transform(struct jump_entry *entry,
 			code.jump_short = 0xeb;
 			code.offset = entry->target - (entry->code + 2);
 			/* Check for overflow ? */
-		} else if (memcmp(ip, ideal_nop, 5) == 0) {
+		} else if ((!init && memcmp(ip, ideal_nop, 5) == 0) ||
+			   (init && memcmp(ip, default_nop, 5) == 0)) {
 			size = JUMP_LABEL_NOP_SIZE;
 			code.jump = 0xe9;
 			code.offset = entry->target - (entry->code + size);


[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

^ permalink raw reply related	[flat|nested] 22+ messages in thread

* Re: [PATCH 0/5 v2] [GIT PULL] x86/jump label: Paranoid checks and 2 or 5 byte nops
  2012-02-02 22:04                   ` Steven Rostedt
@ 2012-02-02 22:07                     ` H. Peter Anvin
  2012-02-02 22:53                       ` Steven Rostedt
  0 siblings, 1 reply; 22+ messages in thread
From: H. Peter Anvin @ 2012-02-02 22:07 UTC (permalink / raw)
  To: Steven Rostedt
  Cc: Ingo Molnar, linux-kernel, Andrew Morton, Jason Baron,
	Frederic Weisbecker

On 02/02/2012 02:04 PM, Steven Rostedt wrote:
> commit 7bbd9688727dd30cd44b90b3c9c35f0f66af77ff
> Author: Steven Rostedt<srostedt@redhat.com>
> Date:   Thu Feb 2 16:55:43 2012 -0500
>
>      x86/jump labels: Handle initialization of enabled nops
>
>      When jump labels are initialized at boot up, they are compared
>      to the default_nop before switching to the ideal nop.
>
>      But if a jump label is enabled by default on start up, the
>      enabled code does not test against the default nop, only the
>      ideal nop. But as this jump label has not been converted to the
>      ideal nop, it fails the check, and will crash the box.
>
>      The enabled path needs to be aware of initialization too.
>
>      Reported-by: Ingo Molnar<mingo@elte.hu>
>      Signed-off-by: Steven Rostedt<rostedt@goodmis.org>
>

Would it make more sense to keep track of three states:

"Default"
"Enabled"
"Disabled"

	-?

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [PATCH 0/5 v2] [GIT PULL] x86/jump label: Paranoid checks and 2 or 5 byte nops
  2012-02-02 22:07                     ` H. Peter Anvin
@ 2012-02-02 22:53                       ` Steven Rostedt
  0 siblings, 0 replies; 22+ messages in thread
From: Steven Rostedt @ 2012-02-02 22:53 UTC (permalink / raw)
  To: H. Peter Anvin
  Cc: Ingo Molnar, linux-kernel, Andrew Morton, Jason Baron,
	Frederic Weisbecker

On Thu, 2012-02-02 at 14:07 -0800, H. Peter Anvin wrote:

> Would it make more sense to keep track of three states:
> 
> "Default"
> "Enabled"
> "Disabled"

Well, it is only default on start up, and every jump label is
initialized then to the ideal nop. Either at boot up, or on module load.

What's nice is that the jump label init calls call the "_static" version
of the update (arch_jump_label_transform_static()), and the
enable/disable calls the non "_static" version
(arch_jump_label_transform()). This means that we can set the "init"
flag depending on which way we got into the common code. The upper layer
only needs to know if the field is enabled or disabled. Remember this is
a x86 specific thing. Other archs do not have a different "default" nop.
There's no reason to save a "default" state, as that would require
changing the common arch layers of jump label.

-- Steve

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [PATCH 0/5 v2] [GIT PULL] x86/jump label: Paranoid checks and 2 or 5 byte nops
  2012-02-02 14:31                 ` Steven Rostedt
  2012-02-02 22:04                   ` Steven Rostedt
@ 2012-02-03  7:36                   ` Ingo Molnar
  2012-02-03 13:31                     ` Steven Rostedt
  1 sibling, 1 reply; 22+ messages in thread
From: Ingo Molnar @ 2012-02-03  7:36 UTC (permalink / raw)
  To: Steven Rostedt
  Cc: H. Peter Anvin, linux-kernel, Andrew Morton, Jason Baron,
	Frederic Weisbecker


* Steven Rostedt <rostedt@goodmis.org> wrote:

> Now I'm running a ktest bisect on the out-of-tree branch to 
> find the commit that prevents this box from booting. [...]

Let me know once you have found that and are able to boot -tip 
with your new bits applied. tip:out-of-tree needs definitely 
needs a cleanup - I'll probably even make it internal to my 
testing to not uglify tip:master.

Thanks,

	Ingo

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [PATCH 0/5 v2] [GIT PULL] x86/jump label: Paranoid checks and 2 or 5 byte nops
  2012-02-03  7:36                   ` Ingo Molnar
@ 2012-02-03 13:31                     ` Steven Rostedt
  2012-02-05 11:47                       ` Ingo Molnar
  0 siblings, 1 reply; 22+ messages in thread
From: Steven Rostedt @ 2012-02-03 13:31 UTC (permalink / raw)
  To: Ingo Molnar
  Cc: H. Peter Anvin, linux-kernel, Andrew Morton, Jason Baron,
	Frederic Weisbecker

On Fri, 2012-02-03 at 08:36 +0100, Ingo Molnar wrote:
> * Steven Rostedt <rostedt@goodmis.org> wrote:
> 
> > Now I'm running a ktest bisect on the out-of-tree branch to 
> > find the commit that prevents this box from booting. [...]
> 
> Let me know once you have found that and are able to boot -tip 
> with your new bits applied. tip:out-of-tree needs definitely 
> needs a cleanup - I'll probably even make it internal to my 
> testing to not uglify tip:master.

Found it. I found this once before, but couldn't find it when I looked,
but it was still there :-/

Anyway, here's the commit that prevents my box from booting:

commit 41e95d95208c62d4b0fbcee5f16d93e23ca32984
Author: Ingo Molnar <mingo@elte.hu>
Date:   Thu Sep 17 23:12:20 2009 +0200

    <not-for-merge> Disable DEVTMPFS_MOUNT for now


It seems that this box requires DEVTMPFS_MOUNT to be set in order to
boot.

-- Steve



^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [PATCH 0/5 v2] [GIT PULL] x86/jump label: Paranoid checks and 2 or 5 byte nops
  2012-02-03 13:31                     ` Steven Rostedt
@ 2012-02-05 11:47                       ` Ingo Molnar
  0 siblings, 0 replies; 22+ messages in thread
From: Ingo Molnar @ 2012-02-05 11:47 UTC (permalink / raw)
  To: Steven Rostedt
  Cc: H. Peter Anvin, linux-kernel, Andrew Morton, Jason Baron,
	Frederic Weisbecker


* Steven Rostedt <rostedt@goodmis.org> wrote:

> On Fri, 2012-02-03 at 08:36 +0100, Ingo Molnar wrote:
> > * Steven Rostedt <rostedt@goodmis.org> wrote:
> > 
> > > Now I'm running a ktest bisect on the out-of-tree branch to 
> > > find the commit that prevents this box from booting. [...]
> > 
> > Let me know once you have found that and are able to boot -tip 
> > with your new bits applied. tip:out-of-tree needs definitely 
> > needs a cleanup - I'll probably even make it internal to my 
> > testing to not uglify tip:master.
> 
> Found it. I found this once before, but couldn't find it when I looked,
> but it was still there :-/
> 
> Anyway, here's the commit that prevents my box from booting:
> 
> commit 41e95d95208c62d4b0fbcee5f16d93e23ca32984
> Author: Ingo Molnar <mingo@elte.hu>
> Date:   Thu Sep 17 23:12:20 2009 +0200
> 
>     <not-for-merge> Disable DEVTMPFS_MOUNT for now
> 
> 
> It seems that this box requires DEVTMPFS_MOUNT to be set in 
> order to boot.

Hm, silly userspace, because the *enabling* of this option can 
break existing setups as well:

| Subject: [PATCH] <not-for-merge> Disable DEVTMPFS_MOUNT for now
|
| Causing bootup problems - /dev/zero and /dev/null not being there, etc.
|
| NOT-Signed-off-by: Ingo Molnar <mingo@elte.hu>

You could probably work it around by doing something like:

   mkdir /mnt2
   mount /dev/root /mnt2
   cp -a /dev/* /mnt2/

this will create the device nodes in /dev and make them 
available to early userspace even if it could not mount devtmpfs 
like it used to.

Thanks,

	Ingo

^ permalink raw reply	[flat|nested] 22+ messages in thread

end of thread, other threads:[~2012-02-05 11:48 UTC | newest]

Thread overview: 22+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-01-28 16:09 [PATCH 0/5 v2] [GIT PULL] x86/jump label: Paranoid checks and 2 or 5 byte nops Steven Rostedt
2012-01-28 16:09 ` [PATCH 1/5 v2] x86/jump-label: Use best default nops for inital jump label calls Steven Rostedt
2012-01-28 16:09 ` [PATCH 2/5 v2] x86/jump-label: Do not bother updating nops if they are correct Steven Rostedt
2012-01-28 16:09 ` [PATCH 3/5 v2] x86/jump-label: Add safety checks to jump label conversions Steven Rostedt
2012-01-28 16:09 ` [PATCH 4/5 v2] jump labels: Add infrastructure to update jump labels at compile time Steven Rostedt
2012-01-28 16:09 ` [PATCH 5/5 v2] x86/jump labels: Use etiher 5 byte or 2 byte jumps Steven Rostedt
2012-01-30 14:48 ` [PATCH 0/5 v2] [GIT PULL] x86/jump label: Paranoid checks and 2 or 5 byte nops Ingo Molnar
2012-01-30 15:07   ` Steven Rostedt
2012-01-31 19:48     ` Ingo Molnar
2012-02-01  5:08       ` Steven Rostedt
2012-02-01  8:05         ` Ingo Molnar
2012-02-01 13:20           ` Steven Rostedt
2012-02-01 15:21           ` Steven Rostedt
2012-02-02 13:51             ` Ingo Molnar
2012-02-02 14:10               ` H. Peter Anvin
2012-02-02 14:31                 ` Steven Rostedt
2012-02-02 22:04                   ` Steven Rostedt
2012-02-02 22:07                     ` H. Peter Anvin
2012-02-02 22:53                       ` Steven Rostedt
2012-02-03  7:36                   ` Ingo Molnar
2012-02-03 13:31                     ` Steven Rostedt
2012-02-05 11:47                       ` Ingo Molnar

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).