archive mirror
 help / color / mirror / Atom feed
From: Greg KH <>
To: Linus Torvalds <>,
	Andrew Morton <>
Subject: [GIT PATCH] USB bug fixes for 3.3-rc1
Date: Mon, 30 Jan 2012 11:36:21 -0800	[thread overview]
Message-ID: <> (raw)

Here are a bunch of USB patches for 3.3-rc1.

Nothing major, largest thing here is the removal of some drivers that
did not work at all.  Other than that, the normal collection of bugfixes
and new device ids.

Please pull from:
	git:// usb-3.3-rc1

(usb-3.3-rc1 is a signed tag, I need to figure out how to build git
1.7.9 for openSUSE to properly generate this pull message...)

All of these patches have been in the -next and -mm releases for a
while, and will be sent to the linux-usb list for those that wish to see


greg k-h


 drivers/usb/class/cdc-wdm.c            |   59 +-
 drivers/usb/dwc3/ep0.c                 |   15 +-
 drivers/usb/dwc3/gadget.c              |    2 +-
 drivers/usb/gadget/composite.c         |    7 +-
 drivers/usb/gadget/epautoconf.c        |    2 +-
 drivers/usb/gadget/f_mass_storage.c    |   10 +-
 drivers/usb/gadget/fsl_udc_core.c      |    4 +-
 drivers/usb/gadget/langwell_udc.c      |  107 +--
 drivers/usb/gadget/langwell_udc.h      |    1 -
 drivers/usb/gadget/storage_common.c    |    6 +-
 drivers/usb/host/ehci-fsl.c            |    2 +-
 drivers/usb/host/ehci-pci.c            |    6 +
 drivers/usb/host/ohci-dbg.c            |   12 +-
 drivers/usb/host/ohci-pci.c            |    4 +
 drivers/usb/host/xhci-ring.c           |    6 +-
 drivers/usb/misc/emi26.c               |    3 -
 drivers/usb/misc/emi62.c               |    3 -
 drivers/usb/misc/usbsevseg.c           |    2 +-
 drivers/usb/musb/davinci.c             |    3 -
 drivers/usb/musb/musb_core.c           |    5 +-
 drivers/usb/musb/omap2430.c            |    4 +-
 drivers/usb/otg/Kconfig                |   18 +-
 drivers/usb/otg/Makefile               |    1 -
 drivers/usb/otg/langwell_otg.c         | 2347 --------------------------------
 drivers/usb/otg/mv_otg.c               |    2 +
 drivers/usb/renesas_usbhs/mod_gadget.c |    2 +-
 drivers/usb/serial/cp210x.c            |  105 +-
 drivers/usb/serial/ftdi_sio.c          |   14 +-
 drivers/usb/serial/ftdi_sio_ids.h      |   19 +
 drivers/usb/serial/io_ti.c             |   10 +-
 drivers/usb/serial/kobil_sct.c         |    2 +-
 drivers/usb/serial/option.c            |    5 +
 drivers/usb/serial/qcaux.c             |    7 +-
 drivers/usb/storage/realtek_cr.c       |    2 +-
 drivers/usb/usb-skeleton.c             |   18 +-
 drivers/usb/wusbcore/Kconfig           |    2 +-
 include/linux/usb.h                    |    1 +
 include/linux/usb/langwell_otg.h       |  139 --
 38 files changed, 225 insertions(+), 2732 deletions(-)
 delete mode 100644 drivers/usb/otg/langwell_otg.c
 delete mode 100644 include/linux/usb/langwell_otg.h


Alan Cox (1):
      USB: ftdi_sio: Add more identifiers

Alan Stern (1):
      USB: OHCI: fix new compiler warnings

Alessandro Rubini (1):
      usb: add support for STA2X11 host driver

Alexander Shishkin (3):
      usb: otg: kill langwell_otg driver
      usb: gadget: langwell: drop langwell_otg support
      usb: gadget: langwell: don't call gadget's disconnect()

Andiry Xu (2):
      usb: gadget: storage: endian fix
      xHCI: Cleanup isoc transfer ring when TD length mismatch found

Andrew Morton (1):
      drivers/usb/misc/emi26.c & emi62.c: fix warnings

Bjørn Mork (5):
      USB: cdc-wdm: updating desc->length must be protected by spin_lock
      USB: cdc-wdm: use two mutexes to allow simultaneous read and write
      USB: cdc-wdm: call wake_up_all to allow driver to shutdown on device removal
      USB: cdc-wdm: better allocate a buffer that is at least as big as we tell the USB core
      USB: cdc-wdm: Avoid hanging on interface with no USB_CDC_DMM_TYPE

Dan Williams (1):
      qcaux: add more Pantech UML190 and UML290 ports

Eric W. Biederman (1):
      usb: io_ti: Make edge_remove_sysfs_attrs the port_remove method.

Fabio Estevam (3):
      drivers: usb: otg: Fix dependencies for some OTG drivers
      usb: gadget: f_mass_storage: Use "bool" instead of "int" in fsg_module_parameters
      drivers: usb: Fix dependency for USB_HWA_HCD

Felipe Balbi (3):
      usb: dwc3: ep0: tidy up Pending Request handling
      usb: dwc3: ep0: fix compile warning
      usb: serial: kobil_sct: fix compile warning:

Geert Uytterhoeven (1):
      usb: mv-otg - Fix build if CONFIG_USB is not set

Grazvydas Ignotas (1):
      usb: musb: fix shutdown while usb gadget is in use

Greg Kroah-Hartman (2):
      Revert "USB: usb-skeleton.c: fix open/disconnect race"
      Revert "drivers: usb: Fix dependency for USB_HWA_HCD"

Harrison Metzger (1):
      USB: usbsevseg: fix max length

Jesper Juhl (1):
      usb: renesas: silence uninitialized variable report in usbhsg_recip_run_handle()

Johan Hovold (8):
      USB: ftdi_sio: fix TIOCSSERIAL baud_base handling
      USB: ftdi_sio: fix initial baud rate
      USB: cp210x: call generic open last in open
      USB: cp210x: fix up set_termios variables
      USB: cp210x: do not map baud rates to B0
      USB: cp210x: clean up, refactor and document speed handling
      USB: cp210x: initialise baud rate at open
      USB: cp210x: allow more baud rates above 1Mbaud

Julia Lawall (1):
      drivers/usb/host/ehci-fsl.c: add missing iounmap

Kentaro Matsuyama (1):
      USB: option: Add LG docomo L-02C

NeilBrown (1):
      usb: musb: omap2430: minor cleanups.

Paul Zimmerman (1):
      usb: gadget: SS Isoc endpoints use comp_desc->bMaxBurst too

Peter Chen (1):
      usb: gadget: fsl_udc: fix the usage of udc->max_ep

Peter Korsgaard (1):
      USB: ftdi_sio: add PID for TI XDS100v2 / BeagleBone A3

Peter Naulls (1):
      USB: serial: ftdi additional IDs

Preston Fick (1):
      USB: cp210x: fix CP2104 baudrate usage

Randy Dunlap (2):
      kernel-doc: fix new warning in usb.h
      uwb & wusb: fix kconfig error

Renato Caldas (1):
      USB: serial: CP210x: Added USB-ID for the Link Instruments MSO-19

Sarah Sharp (1):
      xhci: Fix USB 3.0 device restart on resume.

Sebastian Andrzej Siewior (2):
      usb: gadget: check for streams only for SS udcs
      usb: dwc3: unmap the proper number of sg entries

Sekhar Nori (1):
      usb: musb: davinci: fix build breakage

Stanislaw Gruszka (1):
      USB: Realtek cr: fix autopm scheduling while atomic

                 reply	other threads:[~2012-01-30 19:36 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).