linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Don Zickus <dzickus@redhat.com>
To: Cong Wang <xiyou.wangcong@gmail.com>
Cc: linux-kernel@vger.kernel.org, Andrew Morton <akpm@linux-foundation.org>
Subject: Re: [V2 Patch] nmi watchdog: do not use cpp symbol in Kconfig
Date: Wed, 1 Feb 2012 10:03:13 -0500	[thread overview]
Message-ID: <20120201150313.GG5650@redhat.com> (raw)
In-Reply-To: <1328099500-15923-1-git-send-email-xiyou.wangcong@gmail.com>

On Wed, Feb 01, 2012 at 08:31:40PM +0800, Cong Wang wrote:
> V2: Fix subject...
> 
> ARCH_HAS_NMI_WATCHDOG is a macro defined by arch,
> but config HARDLOCKUP_DETECTOR depends on it.
> This is wrong, ARCH_HAS_NMI_WATCHDOG has to be a Kconfig
> config, and arch's need it should select it explicitly.

Seems to make sense.  How did you stumble upon that?

Acked-by: Don Zickus <dzickus@redhat.com>

> 
> Cc: Don Zickus <dzickus@redhat.com>
> Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
> 
> ---
>  arch/Kconfig                          |    3 +++
>  arch/blackfin/Kconfig                 |    1 +
>  arch/blackfin/include/asm/irq.h       |    4 ----
>  arch/mn10300/Kconfig                  |    1 +
>  arch/mn10300/include/asm/reset-regs.h |    4 ----
>  arch/sparc/Kconfig                    |    1 +
>  arch/sparc/include/asm/irq_64.h       |    1 -
>  include/linux/nmi.h                   |    2 +-
>  lib/Kconfig.debug                     |    2 +-
>  9 files changed, 8 insertions(+), 11 deletions(-)
> 
> diff --git a/arch/Kconfig b/arch/Kconfig
> index 4f55c73..c1a94a7 100644
> --- a/arch/Kconfig
> +++ b/arch/Kconfig
> @@ -109,6 +109,9 @@ config HAVE_KRETPROBES
>  
>  config HAVE_OPTPROBES
>  	bool
> +
> +config HAVE_NMI_WATCHDOG
> +	bool
>  #
>  # An arch should select this if it provides all these things:
>  #
> diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
> index abe5a9e..c1269a1 100644
> --- a/arch/blackfin/Kconfig
> +++ b/arch/blackfin/Kconfig
> @@ -36,6 +36,7 @@ config BLACKFIN
>  	select GENERIC_ATOMIC64
>  	select GENERIC_IRQ_PROBE
>  	select IRQ_PER_CPU if SMP
> +	select HAVE_NMI_WATCHDOG if NMI_WATCHDOG
>  
>  config GENERIC_CSUM
>  	def_bool y
> diff --git a/arch/blackfin/include/asm/irq.h b/arch/blackfin/include/asm/irq.h
> index 12f4060..89de539 100644
> --- a/arch/blackfin/include/asm/irq.h
> +++ b/arch/blackfin/include/asm/irq.h
> @@ -38,8 +38,4 @@
>  
>  #include <asm-generic/irq.h>
>  
> -#ifdef CONFIG_NMI_WATCHDOG
> -# define ARCH_HAS_NMI_WATCHDOG
> -#endif
> -
>  #endif				/* _BFIN_IRQ_H_ */
> diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig
> index 8f1c40d..3aa3de0 100644
> --- a/arch/mn10300/Kconfig
> +++ b/arch/mn10300/Kconfig
> @@ -5,6 +5,7 @@ config MN10300
>  	select GENERIC_IRQ_SHOW
>  	select HAVE_ARCH_TRACEHOOK
>  	select HAVE_ARCH_KGDB
> +	select HAVE_NMI_WATCHDOG if MN10300_WD_TIMER
>  
>  config AM33_2
>  	def_bool n
> diff --git a/arch/mn10300/include/asm/reset-regs.h b/arch/mn10300/include/asm/reset-regs.h
> index 10c7502..8ca2a42 100644
> --- a/arch/mn10300/include/asm/reset-regs.h
> +++ b/arch/mn10300/include/asm/reset-regs.h
> @@ -17,10 +17,6 @@
>  
>  #ifdef __KERNEL__
>  
> -#ifdef CONFIG_MN10300_WD_TIMER
> -#define ARCH_HAS_NMI_WATCHDOG		/* See include/linux/nmi.h */
> -#endif
> -
>  /*
>   * watchdog timer registers
>   */
> diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
> index 9665799..53c7c7a 100644
> --- a/arch/sparc/Kconfig
> +++ b/arch/sparc/Kconfig
> @@ -29,6 +29,7 @@ config SPARC
>  	select GENERIC_IRQ_SHOW
>  	select USE_GENERIC_SMP_HELPERS if SMP
>  	select GENERIC_PCI_IOMAP
> +	select HAVE_NMI_WATCHDOG if SPARC64
>  
>  config SPARC32
>  	def_bool !64BIT
> diff --git a/arch/sparc/include/asm/irq_64.h b/arch/sparc/include/asm/irq_64.h
> index 16dcae6d..abf6afe 100644
> --- a/arch/sparc/include/asm/irq_64.h
> +++ b/arch/sparc/include/asm/irq_64.h
> @@ -95,7 +95,6 @@ void arch_trigger_all_cpu_backtrace(void);
>  extern void *hardirq_stack[NR_CPUS];
>  extern void *softirq_stack[NR_CPUS];
>  #define __ARCH_HAS_DO_SOFTIRQ
> -#define ARCH_HAS_NMI_WATCHDOG
>  
>  #define NO_IRQ		0xffffffff
>  
> diff --git a/include/linux/nmi.h b/include/linux/nmi.h
> index 2d304ef..db50840 100644
> --- a/include/linux/nmi.h
> +++ b/include/linux/nmi.h
> @@ -14,7 +14,7 @@
>   * may be used to reset the timeout - for code which intentionally
>   * disables interrupts for a long time. This call is stateless.
>   */
> -#if defined(ARCH_HAS_NMI_WATCHDOG) || defined(CONFIG_HARDLOCKUP_DETECTOR)
> +#if defined(CONFIG_HAVE_NMI_WATCHDOG) || defined(CONFIG_HARDLOCKUP_DETECTOR)
>  #include <asm/nmi.h>
>  extern void touch_nmi_watchdog(void);
>  #else
> diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
> index 8745ac7..2dc65ba 100644
> --- a/lib/Kconfig.debug
> +++ b/lib/Kconfig.debug
> @@ -181,7 +181,7 @@ config LOCKUP_DETECTOR
>  
>  config HARDLOCKUP_DETECTOR
>  	def_bool LOCKUP_DETECTOR && PERF_EVENTS && HAVE_PERF_EVENTS_NMI && \
> -		 !ARCH_HAS_NMI_WATCHDOG
> +		 !HAVE_NMI_WATCHDOG
>  
>  config BOOTPARAM_HARDLOCKUP_PANIC
>  	bool "Panic (Reboot) On Hard Lockups"

  reply	other threads:[~2012-02-01 15:03 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-02-01 12:31 [V2 Patch] nmi watchdog: do not use cpp symbol in Kconfig Cong Wang
2012-02-01 15:03 ` Don Zickus [this message]
2012-02-01 18:55 ` Mike Frysinger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120201150313.GG5650@redhat.com \
    --to=dzickus@redhat.com \
    --cc=akpm@linux-foundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=xiyou.wangcong@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).