Re: [RFC 7/7] MFD: TWL6040: Add regulator support for VIO, V2V1 supplies

[Mark Brown <broonie@opensource.wolfsonmicro.com>]

[-- Attachment #1: Type: text/plain, Size: 1358 bytes --]

On Thu, Feb 02, 2012 at 02:16:59PM +0200, Peter Ujfalusi wrote:

> +	twl6040->vio = regulator_get(&client->dev, "vio");
> +	if (IS_ERR(twl6040->vio)) {
> +		ret = PTR_ERR(twl6040->vio);
> +		dev_err(&client->dev, "Failed to request VIO supply: %d\n",
> +			ret);
> +		goto regulator_get_err;
> +	}
> +	twl6040->v2v1 = regulator_get(&client->dev, "v2v1");
> +	if (IS_ERR(twl6040->v2v1)) {
> +		ret = PTR_ERR(twl6040->v2v1);
> +		dev_err(&client->dev, "Failed to request V2V1 supply: %d\n",
> +			ret);
> +		regulator_put(twl6040->vio);
> +		goto regulator_get_err;
> +	}

Looks like you want regulator_bulk_get() here.  Or (better yet though
it'd be a potential issue for merge via MFD and the benefits aren't that
exciting since you still need to disable) devm_regulator_bulk_get().

> +	ret = regulator_enable(twl6040->vio);
> +	if (ret != 0) {
> +		dev_err(&client->dev, "Failed to enable VIO: %d\n", ret);
> +		goto power_err;
> +	}
> +	ret = regulator_enable(twl6040->v2v1);
> +	if (ret != 0) {
> +		dev_err(&client->dev, "Failed to enable V2V1: %d\n", ret);
> +		regulator_disable(twl6040->vio);
> +		goto power_err;
> +	}

Similarly regulator_bulk_enable() here, and it'll fix...

>  gpio1_err:
> +	regulator_disable(twl6040->v2v1);
> +	regulator_disable(twl6040->vio);

...the fact that if you fail to enable the v2.1 regulator you don't
disable vio.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]