On Fri, Mar 30, 2012 at 03:38:28PM +0900, Geon Si Jeong wrote: > It is a simple driver for LM3556 Chip(Texas Instruments) > LM3556 : > The LM3556 is a 4 MHz fixed-frequency synchronous boost > converter plus 1.5A constant current driver for a high-current white LED. > Datasheet: www.national.com/ds/LM/LM3556.pdf > > Tested on OMAP4430 > > Signed-off-by: Geon Si Jeong Hi! Thanks for your contribution. I found a few issues, I mentioned the first occurence, but they may appear multiple times. Please check that. > --- > drivers/leds/Kconfig | 9 + > drivers/leds/Makefile | 2 +- > drivers/leds/leds-lm3556.c | 462 +++++++++++++++++++++++++++++++++++++++++++ > include/linux/leds-lm3556.h | 242 ++++++++++++++++++++++ > 4 files changed, 714 insertions(+), 1 deletions(-) > create mode 100644 drivers/leds/leds-lm3556.c > create mode 100644 include/linux/leds-lm3556.h > > diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig > index 589ba02..8ebdb3f 100644 > --- a/drivers/leds/Kconfig > +++ b/drivers/leds/Kconfig > @@ -401,6 +401,15 @@ config LEDS_MAX8997 > This option enables support for on-chip LED drivers on > MAXIM MAX8997 PMIC. > > +config LEDS_LM3556 > + tristate "LED Support for TI LM3556 Chip" > + depends on LEDS_CLASS > + depends on I2C > + help > + This option enables support for LEDs connected to LM3556. > + LM3556 includes Torch, Flash and Indicator functions and > + controlled via I2C. > + > config LEDS_OT200 > tristate "LED support for the Bachmann OT200" > depends on LEDS_CLASS && HAS_IOMEM > diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile > index fa0f428..8ad2a46 100644 > --- a/drivers/leds/Makefile > +++ b/drivers/leds/Makefile > @@ -46,7 +46,7 @@ obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o > obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o > obj-$(CONFIG_LEDS_RENESAS_TPU) += leds-renesas-tpu.o > obj-$(CONFIG_LEDS_MAX8997) += leds-max8997.o > - > +obj-$(CONFIG_LEDS_LM3556) += leds-lm3556.o > # LED SPI Drivers > obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o > > diff --git a/drivers/leds/leds-lm3556.c b/drivers/leds/leds-lm3556.c > new file mode 100644 > index 0000000..65766c1 > --- /dev/null > +++ b/drivers/leds/leds-lm3556.c > @@ -0,0 +1,462 @@ > +/* > + * Simple driver for Texas Instruments LM3556 LED Flash driver chip (Rev0x03) > + * Copyright (C) 2012 Texas Instruments > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + * > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#define REG_FILT_TIME (0x0) > +#define REG_IVFM_MODE (0x1) > +#define REG_NTC (0x2) > +#define REG_INDIC_TIME (0x3) > +#define REG_INDIC_BLINK (0x4) > +#define REG_INDIC_PERIOD (0x5) > +#define REG_TORCH_TIME (0x6) > +#define REG_CONF (0x7) > +#define REG_FLASH (0x8) > +#define REG_I_CTRL (0x9) > +#define REG_ENABLE (0xA) > +#define REG_FLAG (0xB) > +#define REG_MAX (0xC) > + > +#define IVFM_FILTER_TIME_SHIFT (3) > +#define UVLO_EN_SHIFT (7) > +#define HYSTERSIS_SHIFT (5) > +#define IVM_D_TH_SHIFT (2) > +#define IVFM_ADJ_MODE_SHIFT (0) > +#define NTC_EVENT_LVL_SHIFT (5) > +#define NTC_TRIP_TH_SHIFT (2) > +#define NTC_BIAS_I_LVL_SHIFT (0) > +#define INDIC_RAMP_UP_TIME_SHIFT (3) > +#define INDIC_RAMP_DN_TIME_SHIFT (0) > +#define INDIC_N_BLANK_SHIFT (4) > +#define INDIC_PULSE_TIME_SHIFT (0) > +#define INDIC_N_PERIOD_SHIFT (0) > +#define TORCH_RAMP_UP_TIME_SHIFT (3) > +#define TORCH_RAMP_DN_TIME_SHIFT (0) > +#define STROBE_USUAGE_SHIFT (7) > +#define STROBE_PIN_POLARITY_SHIFT (6) > +#define TORCH_PIN_POLARITY_SHIFT (5) > +#define TX_PIN_POLARITY_SHIFT (4) > +#define TX_EVENT_LVL_SHIFT (3) > +#define IVFM_EN_SHIFT (2) > +#define NTC_MODE_SHIFT (1) > +#define INDIC_MODE_SHIFT (0) > +#define INDUCTOR_I_LIMIT_SHIFT (6) > +#define FLASH_RAMP_TIME_SHIFT (3) > +#define FLASH_TOUT_TIME_SHIFT (0) > +#define TORCH_I_SHIFT (4) > +#define FLASH_I_SHIFT (0) > +#define NTC_EN_SHIFT (7) > +#define TX_PIN_EN_SHIFT (6) > +#define STROBE_PIN_EN_SHIFT (5) > +#define TORCH_PIN_EN_SHIFT (4) > +#define PRECHG_MODE_EN_SHIFT (3) > +#define PASS_MODE_ONLY_EN_SHIFT (2) > +#define MODE_BITS_SHIFT (0) > + > +#define IVFM_FILTER_TIME_MASK (0x3) > +#define UVLO_EN_MASK (0x1) > +#define HYSTERSIS_MASK (0x3) > +#define IVM_D_TH_MASK (0x7) > +#define IVFM_ADJ_MODE_MASK (0x3) > +#define NTC_EVENT_LVL_MASK (0x1) > +#define NTC_TRIP_TH_MASK (0x7) > +#define NTC_BIAS_I_LVL_MASK (0x3) > +#define INDIC_RAMP_UP_TIME_MASK (0x7) > +#define INDIC_RAMP_DN_TIME_MASK (0x7) > +#define INDIC_N_BLANK_MASK (0x7) > +#define INDIC_PULSE_TIME_MASK (0x7) > +#define INDIC_N_PERIOD_MASK (0x7) > +#define TORCH_RAMP_UP_TIME_MASK (0x7) > +#define TORCH_RAMP_DN_TIME_MASK (0x7) > +#define STROBE_USUAGE_MASK (0x1) > +#define STROBE_PIN_POLARITY_MASK (0x1) > +#define TORCH_PIN_POLARITY_MASK (0x1) > +#define TX_PIN_POLARITY_MASK (0x1) > +#define TX_EVENT_LVL_MASK (0x1) > +#define IVFM_EN_MASK (0x1) > +#define NTC_MODE_MASK (0x1) > +#define INDIC_MODE_MASK (0x1) > +#define INDUCTOR_I_LIMIT_MASK (0x3) > +#define FLASH_RAMP_TIME_MASK (0x7) > +#define FLASH_TOUT_TIME_MASK (0x7) > +#define TORCH_I_MASK (0x7) > +#define FLASH_I_MASK (0xF) > +#define NTC_EN_MASK (0x1) > +#define TX_PIN_EN_MASK (0x1) > +#define STROBE_PIN_EN_MASK (0x1) > +#define TORCH_PIN_EN_MASK (0x1) > +#define PRECHG_MODE_EN_MASK (0x1) > +#define PASS_MODE_ONLY_EN_MASK (0x1) > +#define MODE_BITS_MASK (0x13) > +#define EX_PIN_CONTROL_MASK (0xF1) > +#define EX_PIN_ENABLE_MASK (0x70) > + > + > +#define INDIC_PATTERN_SIZE 4 > + > +struct indicator { > + u8 blinking; > + u8 period_cnt; > +}; > + > +struct lm3556_chip_data { > + struct i2c_client *client; > + > + struct led_classdev cdev_flash; > + struct led_classdev cdev_torch; > + struct led_classdev cdev_indicator; > + > + struct lm3556_platform_data *pdata; > + struct mutex lock; > + > + u8 last_flag; > +}; > + > +/*Indicator Pattern*/ > +static struct indicator indicator_pattern[INDIC_PATTERN_SIZE] = { > + [0] = {(INDIC_N_BLANK_0 << INDIC_N_BLANK_SHIFT) > + | PULSE_TIME_0_MS, INDIC_PERIOD_0}, > + [1] = {(INDIC_N_BLANK_15 << INDIC_N_BLANK_SHIFT) > + | PULSE_TIME_32_MS, INDIC_PERIOD_1}, > + [2] = {(INDIC_N_BLANK_10 << INDIC_N_BLANK_SHIFT) > + | PULSE_TIME_32_MS, INDIC_PERIOD_4}, > + [3] = {(INDIC_N_BLANK_5 << INDIC_N_BLANK_SHIFT) > + | PULSE_TIME_32_MS, INDIC_PERIOD_7}, > +}; > + > +/* i2c access*/ > +int lm3556_read_reg(struct i2c_client *client, u8 reg, u8 * val) > +{ > + int ret; > + struct lm3556_chip_data *chip = i2c_get_clientdata(client); > + > + mutex_lock(&chip->lock); > + ret = i2c_smbus_read_byte_data(client, reg); > + mutex_unlock(&chip->lock); No need for this lock, i2c-core locks during transactions. > + > + if (ret < 0) { > + printk(KERN_ERR "[LM3556]reading fail at 0x%02x error %d\n", > + reg, ret); dev_err()and drop LM3556 > + return ret; > + } > + *val = ret & 0xff; > + return 0; > +} If you'd return the value here, you could save the pointer to u8 as argument. > +EXPORT_SYMBOL_GPL(lm3556_read_reg); > + > +int lm3556_write_reg(struct i2c_client *client, u8 reg, u8 val) > +{ > + int ret = 0; > + struct lm3556_chip_data *chip = i2c_get_clientdata(client); > + > + mutex_lock(&chip->lock); > + ret = i2c_smbus_write_byte_data(client, reg, val); > + mutex_unlock(&chip->lock); > + > + if (ret < 0) > + printk(KERN_ERR"[LM3556] writting fail at 0x%02x\n", reg); > + return ret; > +} > +EXPORT_SYMBOL_GPL(lm3556_write_reg); > + > +int lm3556_write_bits(struct i2c_client *client, > + u8 reg, u8 val, u8 mask, u8 shift) > +{ > + int ret; > + u8 reg_val; > + > + ret = lm3556_read_reg(client, reg, ®_val); > + if (ret < 0) > + return ret; > + reg_val &= (~(mask << shift)); > + reg_val |= ((val & mask) << shift); > + > + ret = lm3556_write_reg(client, reg, reg_val); > + return ret; > +} > +EXPORT_SYMBOL_GPL(lm3556_write_bits); Seeing all these functions it may be worth converting to REGMAP. Then you already have regmap_update_bits and the like. > + > +/* chip initialize*/ > +static int lm3556_chip_init(struct lm3556_chip_data *chip) > +{ > + u8 reg_val; > + int ret = 0; > + struct i2c_client *client = chip->client; > + struct lm3556_platform_data *pdata = chip->pdata; > + > + /*Set Config Register for external PINs depended by HW*/ Comment format /* text */ > + ret = lm3556_read_reg(client, REG_CONF, ®_val); > + reg_val &= ~EX_PIN_CONTROL_MASK; > + reg_val |= ((pdata->torch_pin_polarity & 0x01) > + << TORCH_PIN_POLARITY_SHIFT); > + reg_val |= ((pdata->strobe_usuage & 0x01) << STROBE_USUAGE_SHIFT); > + reg_val |= ((pdata->strobe_pin_polarity & 0x01) > + << STROBE_PIN_POLARITY_SHIFT); > + reg_val |= ((pdata->tx_pin_polarity & 0x01) << TX_PIN_POLARITY_SHIFT); > + reg_val |= ((pdata->indicator_mode & 0x01) << INDIC_MODE_SHIFT); > + ret |= lm3556_write_reg(client, REG_CONF, reg_val); > + > + /*Set Enable Register for external PINs depended by HW*/ > + ret = lm3556_read_reg(client, REG_ENABLE, ®_val); ret = ret |= ret = ... -> BROKEN > + reg_val &= ~EX_PIN_ENABLE_MASK; > + reg_val |= ((pdata->torch_pin_en & 0x01) << TORCH_PIN_EN_SHIFT); > + reg_val |= ((pdata->strobe_pin_en & 0x01) << STROBE_PIN_EN_SHIFT); > + reg_val |= ((pdata->tx_pin_en & 0x01) << TX_PIN_EN_SHIFT); > + ret |= lm3556_write_reg(client, REG_ENABLE, reg_val); > + return ret; > +} > + > +/* chip control*/ > +static void lm3556_control(struct lm3556_chip_data *chip, > + u8 brightness, enum lm3556_mode opmode) > +{ > + struct i2c_client *client = chip->client; > + struct lm3556_platform_data *pdata = chip->pdata; > + > + lm3556_read_reg(client, REG_FLAG, &chip->last_flag); no error checking? > + if (chip->last_flag) > + printk(KERN_INFO"[LM3556] Last FLAG is 0x%x\n", > + chip->last_flag); > + > + /*Brightness 0 means off-state*/ > + if (!brightness) > + opmode = MODES_STASNDBY; > + > + switch (opmode) { > + case MODES_TORCH: > + lm3556_write_bits(client, REG_I_CTRL, > + brightness - 1, TORCH_I_MASK, TORCH_I_SHIFT); > + > + if (pdata->torch_pin_en) > + opmode |= (TORCH_PIN_EN_MASK << TORCH_PIN_EN_SHIFT); > + break; > + > + case MODES_FLASH: > + lm3556_write_bits(client, REG_I_CTRL, > + brightness - 1, FLASH_I_MASK, FLASH_I_SHIFT); > + > + if (pdata->strobe_pin_en) > + opmode |= (STROBE_PIN_EN_MASK << STROBE_PIN_EN_SHIFT); > + if (pdata->tx_pin_en) > + opmode |= (TX_PIN_EN_MASK << TX_PIN_EN_SHIFT); > + break; > + > + case MODES_INDIC: > + lm3556_write_bits(client, REG_I_CTRL, > + brightness - 1, TORCH_I_MASK, TORCH_I_SHIFT); > + > + if (pdata->indicator_mode) > + opmode |= (TORCH_PIN_EN_MASK << TORCH_PIN_EN_SHIFT); > + break; > + > + case MODES_STASNDBY: > + if (pdata->torch_pin_en) > + opmode |= (TORCH_PIN_EN_MASK << TORCH_PIN_EN_SHIFT); > + break; > + > + default: > + return; > + } > + lm3556_write_bits(client, REG_ENABLE, > + opmode, MODE_BITS_MASK, MODE_BITS_SHIFT); > + > + return; > +} > + > +/*torch */ > +static void lm3556_torch_brightness_set(struct led_classdev *cdev, > + enum led_brightness brightness) > +{ > + struct lm3556_chip_data *chip = > + container_of(cdev, struct lm3556_chip_data, cdev_torch); > + > + lm3556_control(chip, (u8) brightness, MODES_TORCH); I might miss something but can't the second argument be the enum-type so we can skip the cast? > + return; > +} > + > +/* flash */ > +static void lm3556_strobe_brightness_set(struct led_classdev *cdev, > + enum led_brightness brightness) > +{ > + struct lm3556_chip_data *chip = > + container_of(cdev, struct lm3556_chip_data, cdev_flash); > + > + lm3556_control(chip, (u8) brightness, MODES_FLASH); > + return; > +} > + > +/* indicator */ > +static void lm3556_indicator_brightness_set(struct led_classdev *cdev, > + enum led_brightness brightness) > +{ > + struct lm3556_chip_data *chip = > + container_of(cdev, struct lm3556_chip_data, cdev_indicator); > + > + lm3556_control(chip, (u8) brightness, MODES_INDIC); > + return; > +} > + > +static ssize_t lm3556_indicator_pattern_store(struct device *dev, > + struct device_attribute *devAttr, > + const char *buf, size_t size) > +{ > + char *after; > + ssize_t ret = -EINVAL; > + struct i2c_client *client = container_of(dev->parent, > + struct i2c_client, dev); > + unsigned long state = simple_strtoul(buf, &after, 10); > + size_t count = after - buf; > + > + if (isspace(*after)) > + count++; > + > + if (count == size) { > + ret = count; > + > + if (state > INDIC_PATTERN_SIZE - 1) > + state = INDIC_PATTERN_SIZE - 1; > + lm3556_write_reg(client, REG_INDIC_BLINK, > + indicator_pattern[state].blinking); > + lm3556_write_reg(client, REG_INDIC_PERIOD, > + indicator_pattern[state].period_cnt); > + } > + return ret; > +} > + > +static DEVICE_ATTR(pattern, 0644, NULL, lm3556_indicator_pattern_store); I don't know the LED subsytsem very well. Is it that specific to the chip so we need a DEVICE_ATTR? Or can this be generalized in the core? > + > +/* Module Initialize */ > +static int lm3556_probe(struct i2c_client *client, > + const struct i2c_device_id *id) > +{ > + struct lm3556_platform_data *pdata = client->dev.platform_data; > + struct lm3556_chip_data *chip; > + > + int err = -ENODEV; > + > + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { > + printk(KERN_ERR"[LM3556]i2c functionality check fail.\n"); > + return err; > + } ENODEV does not fit here. Check Documentation/i2c/fault-codes. > + > + if (pdata == NULL) { > + printk(KERN_ERR"[LM3556] Needs Platform Data.\n"); > + return err; > + } > + > + chip = kzalloc(sizeof(struct lm3556_chip_data), GFP_KERNEL); > + chip->client = client; > + chip->pdata = pdata; > + > + mutex_init(&chip->lock); > + i2c_set_clientdata(client, chip); > + > + if (lm3556_chip_init(chip) < 0) > + goto err_chip_init; > + > + /*flash*/ > + chip->cdev_flash.name = "flash"; > + chip->cdev_flash.max_brightness = 16; > + chip->cdev_flash.brightness_set = lm3556_strobe_brightness_set; > + if (led_classdev_register((struct device *) > + &client->dev, &chip->cdev_flash) < 0) > + goto err_create_flash_file; > + /*torch*/ > + chip->cdev_torch.name = "torch"; > + chip->cdev_torch.max_brightness = 8; > + chip->cdev_torch.brightness_set = lm3556_torch_brightness_set; > + if (led_classdev_register((struct device *) > + &client->dev, &chip->cdev_torch) < 0) > + goto err_create_torch_file; > + /*indicator*/ > + chip->cdev_indicator.name = "indicator"; > + chip->cdev_indicator.max_brightness = 8; > + chip->cdev_indicator.brightness_set = lm3556_indicator_brightness_set; > + if (led_classdev_register((struct device *) > + &client->dev, &chip->cdev_indicator) < 0) > + goto err_create_indicator_file; > + > + if (device_create_file(chip->cdev_indicator.dev, &dev_attr_pattern) < 0) > + goto err_create_pattern_file; > + > + return 0; > + > +err_create_pattern_file: > + led_classdev_unregister(&chip->cdev_indicator); > +err_create_indicator_file: > + led_classdev_unregister(&chip->cdev_torch); > +err_create_torch_file: > + led_classdev_unregister(&chip->cdev_flash); > +err_create_flash_file: > +err_chip_init: > + i2c_set_clientdata(client, NULL); not needed > + kfree(chip); > + printk(KERN_ERR"[LM3556] probe func. returns failed\n"); I'd suggest to drop that. The core has output for that. > + return -ENODEV; > +} > + > +static int lm3556_remove(struct i2c_client *client) > +{ > + struct lm3556_chip_data *chip = i2c_get_clientdata(client); > + > + device_remove_file(chip->cdev_indicator.dev, &dev_attr_pattern); > + led_classdev_unregister(&chip->cdev_indicator); > + led_classdev_unregister(&chip->cdev_torch); > + led_classdev_unregister(&chip->cdev_flash); > + lm3556_write_reg(client, REG_ENABLE, 0); > + > + kfree(chip); > + printk(KERN_INFO "[LM3556] Removing is done"); Ditto. > + return 0; > +} > + > +static const struct i2c_device_id lm3556_id[] = { > + {LM3556_NAME, 0}, > + {} > +}; > + > +MODULE_DEVICE_TABLE(i2c, lm3556_id); > + > +static struct i2c_driver lm3556_i2c_driver = { > + .driver = { > + .name = LM3556_NAME, > + .owner = THIS_MODULE, > + .pm = NULL, > + }, > + .probe = lm3556_probe, > + .remove = __devexit_p(lm3556_remove), > + .id_table = lm3556_id, > +}; > + > +static int __init lm3556_init(void) > +{ > + return i2c_add_driver(&lm3556_i2c_driver); > +} > + > +static void __exit lm3556_exit(void) > +{ > + i2c_del_driver(&lm3556_i2c_driver); > +} > + > +module_init(lm3556_init); > +module_exit(lm3556_exit); Use module_i2c_driver > + > +MODULE_DESCRIPTION("Texas Instruments Flash Lighting driver for LM3556"); > +MODULE_AUTHOR > + ("Geon Si Jeong , Woogyom Kim "); > +MODULE_LICENSE("GPL v2"); > diff --git a/include/linux/leds-lm3556.h b/include/linux/leds-lm3556.h > new file mode 100644 > index 0000000..aee7fab > --- /dev/null > +++ b/include/linux/leds-lm3556.h > @@ -0,0 +1,242 @@ > +/* > + * Simple driver for Texas Instruments LM3556 LED Flash driver chip (Rev0x03) > + * Copyright (C) 2012 Texas Instruments > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + * > + */ > + > +#ifndef __LINUX_LM3556_H > +#define __LINUX_LM3556_H > + > +#define LM3556_NAME "leds-lm3556" > + > +enum lm3556_ivfm_filter_time { > + IVFM_FILTER_TIME_HALF_CURRENT_STEP = 0, > + IVFM_FILTER_TIME_256_USEC, > + IVFM_FILTER_TIME_512_USEC, > + IVFM_FILTER_TIME_1024_USEC > +}; > + > +enum lm3556_ivfm_adj_mode { > + IVFM_ADJ_MODE_REPORT = 0, > + IVFM_ADJ_MODESTOP_HOLD, > + IVFM_ADJ_MODE_DOWN, > + IVFM_ADJ_MODE_UP_DOWN, > +}; > + > +enum lm3556_ivfm_down_threshold { > + IVFM_DN_TH_2_7_V = 0, > + IVFM_DN_TH_2_8_V, > + IVFM_DN_TH_2_9_V, > + IVFM_DN_TH_3_0_V, > + IVFM_DN_TH_3_1_V, > + IVFM_DN_TH_3_2_V, > + IVFM_DN_TH_3_3_V, > + IVFM_DN_TH_3_4_V, > +}; > + > +enum lm3556_ivfm_hyst { > + IVFM_HYST_50_MV = 0, > + IVFM_HYST_100_MV, > + IVFM_HYST_150_MV, > + IVFM_HYST_DIS > +}; > + > +enum lm3556_ntc_curr_lvl { > + NTC_CURR_LVL_25_UA = 0, > + NTC_CURR_LVL_50_UA, > + NTC_CURR_LVL_75_UA, > + NTC_CURR_LVL_100_UA > +}; > + > +enum lm3556_ntc_trip_threshold { > + NTC_TRIP_THRESHOLD_200_MV = 0, > + NTC_TRIP_THRESHOLD_300_MV, > + NTC_TRIP_THRESHOLD_400_MV, > + NTC_TRIP_THRESHOLD_500_MV, > + NTC_TRIP_THRESHOLD_600_MV, > + NTC_TRIP_THRESHOLD_700_MV, > + NTC_TRIP_THRESHOLD_800_MV, > + NTC_TRIP_THRESHOLD_900_MV > +}; > + > +enum lm3556_ntc_event_lvl { > + NTC_EVENT_LVL_STANDBY = 0, > + NTC_EVENT_LVL_REDUCE_MIN_TORCH > +}; > + > +enum lm3556_torch_indic_ramp_time { > + TORCH_INDIC_RAMP_TIME_16_MS = 0, > + TORCH_INDIC_RAMP_TIME_32_MS, > + TORCH_INDIC_RAMP_TIME_64_MS, > + TORCH_INDIC_RAMP_TIME_128_MS, > + TORCH_INDIC_RAMP_TIME_256_MS, > + TORCH_INDIC_RAMP_TIME_512_MS, > + TORCH_INDIC_RAMP_TIME_1024_MS, > + TORCH_INDIC_RAMP_TIME_2048_MS, > +}; > + > +enum lm3556_indic_pulse_time { > + PULSE_TIME_0_MS = 0, > + PULSE_TIME_32_MS, > + PULSE_TIME_64_MS, > + PULSE_TIME_92_MS, > + PULSE_TIME_128_MS, > + PULSE_TIME_160_MS, > + PULSE_TIME_196_MS, > + PULSE_TIME_224_MS, > + PULSE_TIME_256_MS, > + PULSE_TIME_288_MS, > + PULSE_TIME_320_MS, > + PULSE_TIME_352_MS, > + PULSE_TIME_384_MS, > + PULSE_TIME_416_MS, > + PULSE_TIME_448_MS, > + PULSE_TIME_480_MS, > +}; > + > +enum lm3556_indic_n_blank { > + INDIC_N_BLANK_0 = 0, > + INDIC_N_BLANK_1, > + INDIC_N_BLANK_2, > + INDIC_N_BLANK_3, > + INDIC_N_BLANK_4, > + INDIC_N_BLANK_5, > + INDIC_N_BLANK_6, > + INDIC_N_BLANK_7, > + INDIC_N_BLANK_8, > + INDIC_N_BLANK_9, > + INDIC_N_BLANK_10, > + INDIC_N_BLANK_11, > + INDIC_N_BLANK_12, > + INDIC_N_BLANK_13, > + INDIC_N_BLANK_14, > + INDIC_N_BLANK_15, > +}; > + > +enum lm3556_indic_period { > + INDIC_PERIOD_0 = 0, > + INDIC_PERIOD_1, > + INDIC_PERIOD_2, > + INDIC_PERIOD_3, > + INDIC_PERIOD_4, > + INDIC_PERIOD_5, > + INDIC_PERIOD_6, > + INDIC_PERIOD_7, > +}; > + > +enum lm3556_indic_mode { > + INDIC_MODE_INTERNAL = 0, > + INDIC_MODE_EXTERNAL, > +}; > + > +enum lm3556_flash_timeout { > + FLASH_TIMEOUT_50_MS = 0, > + FLASH_TIMEOUT_100_MS, > + FLASH_TIMEOUT_150_MS, > + FLASH_TIMEOUT_200_MS, > + FLASH_TIMEOUT_250_MS, > + FLASH_TIMEOUT_300_MS, > + FLASH_TIMEOUT_350_MS, > + FLASH_TIMEOUT_400_MS, > +}; > + > +enum lm3556_flash_ramp_time { > + FLASH_RAMP_TIME_256_US = 0, > + FLASH_RAMP_TIME_512_US, > + FLASH_RAMP_TIME_1024_US, > + FLASH_RAMP_TIME_2048_US, > + FLASH_RAMP_TIME_4096_US, > + FLASH_RAMP_TIME_8192_US, > + FLASH_RAMP_TIME_16384_US, > + FLASH_RAMP_TIME_32768_US, > +}; > + > +enum lm3556_indic_current_limit { > + INDIC_I_LIMIT_1500_MA = 0, > + INDIC_I_LIMIT_2000_MA, > + INDIC_I_LIMIT_2500_MA, > + INDIC_I_LIMIT_3000_MA > +}; > + > +enum lm3556_flash_current { > + FLASH_I_93750_UA = 0, > + FLASH_I_187500_UA, > + FLASH_I_281250_UA, > + FLASH_I_375000_UA, > + FLASH_I_468750_UA, > + FLASH_I_562500_UA, > + FLASH_I_656250_UA, > + FLASH_I_750000_UA, > + FLASH_I_843750_UA, > + FLASH_I_937500_UA, > + FLASH_I_1031250_UA, > + FLASH_I_1125000_UA, > + FLASH_I_1218750_UA, > + FLASH_I_1312500_UA, > + FLASH_I_1406250_UA, > + FLASH_I_1500000_UA, > + > +}; > + > +enum lm3556_torch_current { > + TORCH_I_46880_UA = 0, > + TORCH_I_93750_UA, > + TORCH_I_1406300_UA, > + TORCH_I_187500_UA, > + TORCH_I_234380_UA, > + TORCH_I_281250_UA, > + TORCH_I_328130_UA, > + TORCH_I_375000_UA, > +}; > + > +enum lm3556_mode { > + MODES_STASNDBY = 0, > + MODES_INDIC, > + MODES_TORCH, > + MODES_FLASH > +}; > + > +enum lm3556_pass_mode { > + PASS_MODE_NORMAL = 0, > + PASS_MODE_PASS_ONLY > +}; > + > +enum lm3556_prechg_mode { > + PRE_CHARGE_MODE_NORMAL = 0, > + PRE_CHARGE_MODE_PRE_CHARGE > +}; > + > +enum lm3556_pin_polarity { > + PIN_LOW_ACTIVE = 0, > + PIN_HIGH_ACTIVE, > +}; > + > +enum lm3556_pin_enable { > + PIN_DISABLED = 0, > + PIN_ENABLED, > +}; > + > +enum lm3556_strobe_usuage { > + STROBE_EDGE_DETECT = 0, > + STROBE_LEVEL_DETECT, > +}; > + > +struct lm3556_platform_data { > + enum lm3556_pin_enable torch_pin_en; > + enum lm3556_pin_polarity torch_pin_polarity; > + > + enum lm3556_strobe_usuage strobe_usuage; > + enum lm3556_pin_enable strobe_pin_en; > + enum lm3556_pin_polarity strobe_pin_polarity; > + > + enum lm3556_pin_enable tx_pin_en; > + enum lm3556_pin_polarity tx_pin_polarity; > + > + enum lm3556_indic_mode indicator_mode; > +}; > + > +#endif /* __LINUX_LM3556_H */ > -- > 1.7.5.4 Regards, Wolfram -- Pengutronix e.K. | Wolfram Sang | Industrial Linux Solutions | http://www.pengutronix.de/ |