linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Michael Leun <lkml20120218@newton.leun.net>
To: Kelly Anderson <kelly@silka.with-linux.com>
Cc: Mohammed Shafi <shafi.wireless@gmail.com>,
	Ben Greear <greearb@candelatech.com>,
	"ath9k-devel@lists.ath9k.org" <ath9k-devel@venema.h4ckr.net>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Felix Fietkau <nbd@openwrt.org>,
	linux-wireless Mailing List <linux-wireless@vger.kernel.org>
Subject: Re: [ath9k-devel] 3.3.1 ath9k regression
Date: Tue, 3 Apr 2012 20:03:06 +0200	[thread overview]
Message-ID: <20120403200306.0afbb48b@xenia.leun.net> (raw)
In-Reply-To: <4F7AB6FE.3080009@silka.with-linux.com>

On Tue, 03 Apr 2012 02:38:22 -0600
Kelly Anderson <kelly@silka.with-linux.com> wrote:
[...]

I've trouble with db6a6a78d8602964c9dfb1d8ce18daefd92da0a7 /
c1afdaff90538ef085b756454f12b29575411214 ath9k: fix going to full-sleep
on PS idle also.

On my machine the card is detected as usual, connecting to an ap with
wpa2 the first time after driver was loaded does work, but after an
ifconfig wlan0 down / ifconfig wlan0 up it is not able to reconnect again:

Apr  3 19:34:35 jill kernel: [  986.012989] wlan0: authenticate with xx:xx:xx:xx:xx:xx (try 1)
Apr  3 19:34:35 jill kernel: [  986.213059] wlan0: authenticate with xx:xx:xx:xx:xx:xx (try 2)
Apr  3 19:34:35 jill kernel: [  986.413151] wlan0: authenticate with xx:xx:xx:xx:xx:xx (try 3)
Apr  3 19:34:35 jill kernel: [  986.613135] wlan0: authentication with xx:xx:xx:xx:xx:xx timed out
Apr  3 19:34:43 jill kernel: [  994.188209] wlan0: authenticate with xx:xx:xx:xx:xx:xx (try 1)
Apr  3 19:34:43 jill kernel: [  994.388148] wlan0: authenticate with xx:xx:xx:xx:xx:xx (try 2)
Apr  3 19:34:43 jill kernel: [  994.588132] wlan0: authenticate with xx:xx:xx:xx:xx:xx (try 3)
Apr  3 19:34:43 jill kernel: [  994.788044] wlan0: authentication with xx:xx:xx:xx:xx:xx timed out
[...]

rmmod ath9k
modprobe ath9k

Fixes that, after reloading the module it connects (once) again.

modprobe -v ath9k debug=0xe01 does not yield more information than above.

jill:/home/ml # lspci -vvvvvvxxx
[...]
02:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)
        Subsystem: Hewlett-Packard Company Device 3042
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 19
        Region 0: Memory at d2500000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
                Address: 00000000  Data: 0000
        Capabilities: [60] Express (v1) Legacy Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L1, Latency L0 <512ns, L1 <64us
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        Capabilities: [90] MSI-X: Enable- Count=1 Masked-
                Vector table: BAR=0 offset=00000000
                PBA: BAR=0 offset=00000000
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
                AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
        Capabilities: [140 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=01
                        Status: NegoPending- InProgress-
        Capabilities: [160 v1] Device Serial Number 00-00-00-00-00-00-00-00
        Kernel driver in use: ath9k
00: 8c 16 2a 00 07 00 10 00 01 00 80 02 10 00 00 00
10: 04 00 50 d2 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 42 30
30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00
40: 01 50 c2 5b 00 00 00 00 00 00 00 00 00 00 00 00
50: 05 60 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 90 11 00 c0 0c 04 05 10 20 0a 00 11 38 03 00
70: 48 00 11 10 00 00 00 00 c0 03 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 11 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00


After reverting db6a6a78d8602964c9dfb1d8ce18daefd92da0a7 in 3.3.1 it
works again as expected.


-- 
MfG,

Michael Leun


  reply	other threads:[~2012-04-03 18:03 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-04-03  5:46 3.3.1 ath9k regression Kelly Anderson
2012-04-03  6:01 ` Ben Greear
2012-04-03  6:26   ` [ath9k-devel] " Mohammed Shafi
2012-04-03  6:49     ` Kelly Anderson
2012-04-03  7:16       ` Mohammed Shafi
2012-04-03  7:46         ` Kelly Anderson
2012-04-03  7:52           ` Mohammed Shafi
2012-04-03  8:04             ` Mohammed Shafi
2012-04-03  8:38               ` Kelly Anderson
2012-04-03 18:03                 ` Michael Leun [this message]
2012-04-04  7:29                   ` Mohammed Shafi
2012-04-04 15:03                     ` Mohammed Shafi
2012-04-04 21:51                       ` Michael Leun
2012-04-05  6:16                         ` Mohammed Shafi
2012-04-05 13:53                           ` Michael Leun
2012-04-05 18:25                         ` Ben Greear
2012-04-06  5:11                           ` Mohammed Shafi
2012-04-06 20:31                             ` Ben Greear
2012-04-08 23:08                               ` 3.4-rc ath9k regression (Re: [ath9k-devel] 3.3.1 ath9k regression) Michael Leun
2012-04-09  6:28                                 ` Mohammed Shafi
2012-04-09  8:45                                   ` Sergio Correia
2012-04-09 10:25                                   ` Michael Leun
2012-04-09 14:03                                     ` Michael Leun
2012-04-09 14:22                                       ` Mohammed Shafi
2012-04-09 15:29                                         ` Michael Leun
2012-04-10  5:48                                           ` Mohammed Shafi
2012-04-10 10:05                                             ` [ath9k-devel] 3.4-rc ath9k regression (Re: " Mohammed Shafi
2012-04-12 13:46                                           ` 3.4-rc ath9k regression (Re: [ath9k-devel] " Felix Fietkau
2012-04-12 13:58                                             ` Felipe Contreras
2012-04-12 15:35                                               ` Michael Leun
2012-04-12 18:11                                                 ` Felix Fietkau
2012-04-12 19:28                                                   ` Sergio Correia
2012-04-14 21:15                                                     ` Felipe Contreras
2012-04-12 22:01                                                   ` Michael Leun
2012-04-09 19:12                                 ` [ath9k-devel] 3.4-rc ath9k regression (Re: " Sujith Manoharan
2012-04-09 21:21                                   ` Michael Leun
2012-04-09  6:52                               ` [ath9k-devel] 3.3.1 ath9k regression Mohammed Shafi
2012-04-04 10:40 ` Mantas M.

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120403200306.0afbb48b@xenia.leun.net \
    --to=lkml20120218@newton.leun.net \
    --cc=ath9k-devel@venema.h4ckr.net \
    --cc=greearb@candelatech.com \
    --cc=kelly@silka.with-linux.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=nbd@openwrt.org \
    --cc=shafi.wireless@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).