From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932391Ab2DFVCH (ORCPT ); Fri, 6 Apr 2012 17:02:07 -0400 Received: from 206.83.70.73.ptr.us.xo.net ([206.83.70.73]:53688 "EHLO king.tilera.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758086Ab2DFVCE (ORCPT ); Fri, 6 Apr 2012 17:02:04 -0400 Message-Id: <201204062101.q36L1u5k011404@farm-0027.internal.tilera.com> From: Chris Metcalf Date: Wed, 4 Apr 2012 16:58:27 -0400 Subject: [PATCH 4/6] arch/tile: common DMA code for the GXIO IORPC subsystem To: linux-kernel@vger.kernel.org In-Reply-To: <201204062059.q36KxjEO011317@farm-0027.internal.tilera.com> References: <201204062059.q36KxjEO011317@farm-0027.internal.tilera.com> X-OriginalArrivalTime: 06 Apr 2012 21:01:56.0229 (UTC) FILETIME=[80072B50:01CD1438] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The dma_queue support is used by both the mPipe (networking) and Trio (PCI) hardware shims on tilegx. This common code is selected when either of those drivers is built. Signed-off-by: Chris Metcalf --- arch/tile/gxio/Kconfig | 9 ++ arch/tile/gxio/Makefile | 1 + arch/tile/gxio/dma_queue.c | 236 ++++++++++++++++++++++++++++++++++++ arch/tile/include/gxio/dma_queue.h | 59 +++++++++ 4 files changed, 305 insertions(+), 0 deletions(-) create mode 100644 arch/tile/gxio/dma_queue.c create mode 100644 arch/tile/include/gxio/dma_queue.h diff --git a/arch/tile/gxio/Kconfig b/arch/tile/gxio/Kconfig index c2bae7d..b5cd898 100644 --- a/arch/tile/gxio/Kconfig +++ b/arch/tile/gxio/Kconfig @@ -5,3 +5,12 @@ config TILE_GXIO This option supports direct access to TILE-Gx hardware from user space, via the gxio library, or from kernel space, via kernel IORPC support. + +config TILE_GXIO_DMA + bool "Tilera Gx I/O DMA support" + depends on TILE_GXIO + ---help--- + This option supports direct access to the common I/O DMA facility + within the TILE-Gx mPIPE and Trio hardware. It is not required + in order to use the gxio library to access mPIPE or Trio from + user space. diff --git a/arch/tile/gxio/Makefile b/arch/tile/gxio/Makefile index db1ee28..97ab468 100644 --- a/arch/tile/gxio/Makefile +++ b/arch/tile/gxio/Makefile @@ -3,3 +3,4 @@ # obj-$(CONFIG_TILE_GXIO) += iorpc_globals.o kiorpc.o +obj-$(CONFIG_TILE_GXIO_DMA) += dma_queue.o diff --git a/arch/tile/gxio/dma_queue.c b/arch/tile/gxio/dma_queue.c new file mode 100644 index 0000000..12cb5df --- /dev/null +++ b/arch/tile/gxio/dma_queue.c @@ -0,0 +1,236 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include +#include +#include +#include + +/* Wait for a memory read to complete. */ +#define wait_for_value(val) \ + __asm__ __volatile__("move %0, %0" :: "r"(val)) + +/* The credit counter lives in the high 32 bits. */ +#define DMA_QUEUE_CREDIT_SHIFT 32 + +/* The index is in the low 16. */ +#define DMA_QUEUE_INDEX_MASK ((1 << 16) - 1) + +/* + * The hardware descriptor-ring type. + * This matches the types used by mpipe (MPIPE_EDMA_POST_REGION_VAL_t) + * and trio (TRIO_PUSH_DMA_REGION_VAL_t or TRIO_PULL_DMA_REGION_VAL_t). + * See those types for more documentation on the individual fields. + */ +typedef union { + struct { +#ifndef __BIG_ENDIAN__ + uint64_t ring_idx : 16; + uint64_t count : 16; + uint64_t gen : 1; + uint64_t __reserved : 31; +#else + uint64_t __reserved : 31; + uint64_t gen : 1; + uint64_t count : 16; + uint64_t ring_idx : 16; +#endif + }; + uint64_t word; +} __gxio_ring_t; + + +void __gxio_dma_queue_init(__gxio_dma_queue_t *dma_queue, + void *post_region_addr, + unsigned int num_entries) +{ + /* + * Limit 65536 entry rings to 65535 credits because we only have a + * 16 bit completion counter. + */ + int64_t credits = (num_entries < 65536) ? num_entries : 65535; + + memset(dma_queue, 0, sizeof(*dma_queue)); + + dma_queue->post_region_addr = post_region_addr; + dma_queue->hw_complete_count = 0; + dma_queue->credits_and_next_index = credits << DMA_QUEUE_CREDIT_SHIFT; +} + + +static void __gxio_dma_queue_update_credits(__gxio_dma_queue_t *dma_queue) +{ + __gxio_ring_t val; + uint64_t count; + uint64_t delta; + uint64_t new_count; + + /* + * Read the 64-bit completion count without touching the cache, so + * we later avoid having to evict any sharers of this cache line + * when we update it below. + */ + uint64_t orig_hw_complete_count = + cmpxchg(&dma_queue->hw_complete_count, -1, -1); + + /* Make sure the load completes before we access the hardware. */ + wait_for_value(orig_hw_complete_count); + + /* Read the 16-bit count of how many packets it has completed. */ + val.word = __gxio_mmio_read(dma_queue->post_region_addr); + count = val.count; + + /* + * Calculate the number of completions since we last updated the + * 64-bit counter. It's safe to ignore the high bits because the + * maximum credit value is 65535. + */ + delta = (count - orig_hw_complete_count) & 0xffff; + if (delta == 0) + return; + + /* + * Try to write back the count, advanced by delta. If we race with + * another thread, this might fail, in which case we return + * immediately on the assumption that some credits are (or at least + * were) available. + */ + new_count = orig_hw_complete_count + delta; + if (cmpxchg(&dma_queue->hw_complete_count, + orig_hw_complete_count, new_count) != + orig_hw_complete_count) + return; + + /* + * We succeeded in advancing the completion count; add back the + * corresponding number of egress credits. + */ + __insn_fetchadd(&dma_queue->credits_and_next_index, + (delta << DMA_QUEUE_CREDIT_SHIFT)); +} + + +/* + * A separate 'blocked' method for put() so that backtraces and + * profiles will clearly indicate that we're wasting time spinning on + * egress availability rather than actually posting commands. + */ +int64_t __gxio_dma_queue_wait_for_credits(__gxio_dma_queue_t *dma_queue, + int64_t modifier) +{ + int backoff = 16; + int64_t old; + + do { + int i; + /* Back off to avoid spamming memory networks. */ + for (i = backoff; i > 0; i--) + __insn_mfspr(SPR_PASS); + + /* Check credits again. */ + __gxio_dma_queue_update_credits(dma_queue); + old = __insn_fetchaddgez(&dma_queue->credits_and_next_index, + modifier); + + /* Calculate bounded exponential backoff for next iteration. */ + if (backoff < 256) + backoff *= 2; + } while (old + modifier < 0); + + return old; +} + + +int64_t __gxio_dma_queue_reserve_aux(__gxio_dma_queue_t *dma_queue, + unsigned int num, int wait) +{ + uint64_t slot; + uint64_t complete; + + /* + * Try to reserve 'num' egress command slots. We do this by + * constructing a constant that subtracts N credits and adds N to + * the index, and using fetchaddgez to only apply it if the credits + * count doesn't go negative. + */ + int64_t modifier = (((int64_t)(-num)) << DMA_QUEUE_CREDIT_SHIFT) | num; + int64_t old = __insn_fetchaddgez(&dma_queue->credits_and_next_index, + modifier); + + if (unlikely(old + modifier < 0)) { + /* + * We're out of credits. Try once to get more by checking for + * completed egress commands. If that fails, wait or fail. + */ + __gxio_dma_queue_update_credits(dma_queue); + old = __insn_fetchaddgez(&dma_queue->credits_and_next_index, + modifier); + if (old + modifier < 0) { + if (wait) + old = __gxio_dma_queue_wait_for_credits( + dma_queue, modifier); + else + return GXIO_ERR_DMA_CREDITS; + } + } + + /* + * Compute the value for "slot" which will correspond to the + * eventual value of "hw_complete_count". We combine the low 24 + * bits of "old" with the high 40 bits of "hw_complete_count", and + * if the result is LESS than "hw_complete_count", then we handle + * wrapping by adding "1 << 24". TODO: As a future optimization, + * whenever "hw_complete_count" is modified, we could store the high + * 41 bits of "hw_complete_count" in a separate field, but only when + * they change, and use it instead of "hw_complete_count" above. + * This will reduce the chance of "inval storms". TODO: As a future + * optimization, we could make a version of this function that simply + * returns "old & 0xffffff", which is "good enough" for many uses. + */ + complete = ACCESS_ONCE(dma_queue->hw_complete_count); + slot = (complete & 0xffffffffff000000) | (old & 0xffffff); + if (slot < complete) + slot += 0x1000000; + + /* + * If any of our indexes mod 256 were equivalent to 0, go ahead and + * collect some egress credits, and update "hw_complete_count". + */ + if (unlikely(((slot + num) & 0xff) < num)) { + __gxio_dma_queue_update_credits(dma_queue); + + /* Make sure the index doesn't overflow into the credits. */ +#ifdef __BIG_ENDIAN__ + *(((uint8_t *)&dma_queue->credits_and_next_index) + 4) = 0; +#else + *(((uint8_t *)&dma_queue->credits_and_next_index) + 3) = 0; +#endif + } + + return slot; +} + + +int __gxio_dma_queue_is_complete(__gxio_dma_queue_t *dma_queue, int64_t slot, + int update) +{ + if (update) { + if (ACCESS_ONCE(dma_queue->hw_complete_count) > slot) + return 1; + + __gxio_dma_queue_update_credits(dma_queue); + } + + return ACCESS_ONCE(dma_queue->hw_complete_count) > slot; +} diff --git a/arch/tile/include/gxio/dma_queue.h b/arch/tile/include/gxio/dma_queue.h new file mode 100644 index 0000000..6e18b88 --- /dev/null +++ b/arch/tile/include/gxio/dma_queue.h @@ -0,0 +1,59 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#ifndef _GXIO_DMA_QUEUE_H_ +#define _GXIO_DMA_QUEUE_H_ + +/* + * DMA queue management APIs shared between TRIO and mPIPE. + */ + +#include "common.h" + +/* State object that tracks a DMA queue's head and tail indices, as + well as the number of commands posted and completed. The + structure is accessed via a thread-safe, lock-free algorithm. */ +typedef struct { + /* Address of a MPIPE_EDMA_POST_REGION_VAL_t, + TRIO_PUSH_DMA_REGION_VAL_t, or TRIO_PULL_DMA_REGION_VAL_t + register. These register have identical encodings and provide + information about how many commands have been processed. */ + void *post_region_addr; + + /* A lazily-updated count of how many commands the hardware has + completed. */ + uint64_t hw_complete_count __attribute__ ((aligned(64))); + + /* High 32 bits are a count of available egress command credits, + low 32 bits are the next command index. */ + int64_t credits_and_next_index; +} __gxio_dma_queue_t; + +/* Initialize a dma queue. */ +void __gxio_dma_queue_init(__gxio_dma_queue_t *dma_queue, + void *post_region_addr, unsigned int num_entries); + +/* Try to reserve credits, potentially blocking. */ +int64_t __gxio_dma_queue_reserve_aux(__gxio_dma_queue_t *dma_queue, + unsigned int num, int wait); + +/* Wait for credits to become available. */ +int64_t __gxio_dma_queue_wait_for_credits(__gxio_dma_queue_t *dma_queue, + int64_t modifier); + +/* Check whether a particular slot has completed. */ +int __gxio_dma_queue_is_complete(__gxio_dma_queue_t *dma_queue, int64_t slot, + int update); + +#endif /* !_GXIO_DMA_QUEUE_H_ */ -- 1.6.5.2