linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
To: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>
Subject: Re: [Xen-devel] [PATCH 07/11] xen/mmu: Recycle the Xen provided L4, L3, and L2 pages
Date: Fri, 17 Aug 2012 14:05:57 -0400	[thread overview]
Message-ID: <20120817180557.GA18579@phenom.dumpdata.com> (raw)
In-Reply-To: <alpine.DEB.2.02.1208171902320.15568@kaball.uk.xensource.com>

On Fri, Aug 17, 2012 at 07:07:28PM +0100, Stefano Stabellini wrote:
> On Thu, 16 Aug 2012, Konrad Rzeszutek Wilk wrote:
> > As we are not using them. We end up only using the L1 pagetables
> > and grafting those to our page-tables.
> > 
> > [v1: Per Stefano's suggestion squashed two commits]
> > [v2: Per Stefano's suggestion simplified loop]
> > [v3: Fix smatch warnings]
> > Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> > ---
> >  arch/x86/xen/mmu.c |   40 +++++++++++++++++++++++++++++++++-------
> >  1 files changed, 33 insertions(+), 7 deletions(-)
> > 
> > diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
> > index a59070b..bd92c82 100644
> > --- a/arch/x86/xen/mmu.c
> > +++ b/arch/x86/xen/mmu.c
> > @@ -1708,7 +1708,20 @@ static void convert_pfn_mfn(void *v)
> >  	for (i = 0; i < PTRS_PER_PTE; i++)
> >  		pte[i] = xen_make_pte(pte[i].pte);
> >  }
> > -
> > +static void __init check_pt_base(unsigned long *pt_base, unsigned long *pt_end,
> > +				 unsigned long addr)
> > +{
> > +	if (*pt_base == PFN_DOWN(__pa(addr))) {
> > +		set_page_prot((void *)addr, PAGE_KERNEL);
> > +		clear_page((void *)addr);
> > +		(*pt_base)++;
> > +	}
> > +	if (*pt_end == PFN_DOWN(__pa(addr))) {
> > +		set_page_prot((void *)addr, PAGE_KERNEL);
> > +		clear_page((void *)addr);
> > +		(*pt_end)--;
> > +	}
> > +}
> >  /*
> >   * Set up the initial kernel pagetable.
> >   *
> > @@ -1724,6 +1737,9 @@ void __init xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn)
> >  {
> >  	pud_t *l3;
> >  	pmd_t *l2;
> > +	unsigned long addr[3];
> > +	unsigned long pt_base, pt_end;
> > +	unsigned i;
> >  
> >  	/* max_pfn_mapped is the last pfn mapped in the initial memory
> >  	 * mappings. Considering that on Xen after the kernel mappings we
> > @@ -1731,6 +1747,9 @@ void __init xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn)
> >  	 * set max_pfn_mapped to the last real pfn mapped. */
> >  	max_pfn_mapped = PFN_DOWN(__pa(xen_start_info->mfn_list));
> >  
> > +	pt_base = PFN_DOWN(__pa(xen_start_info->pt_base));
> > +	pt_end = PFN_DOWN(__pa(xen_start_info->pt_base + (xen_start_info->nr_pt_frames * PAGE_SIZE)));
> 

or just do:

	pt_end = pt_base + xen_start_info->nr_pt_frames;

> code style
> 
> >  	/* Zap identity mapping */
> >  	init_level4_pgt[0] = __pgd(0);
> >  
> > @@ -1749,6 +1768,9 @@ void __init xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn)
> >  	l3 = m2v(pgd[pgd_index(__START_KERNEL_map)].pgd);
> >  	l2 = m2v(l3[pud_index(__START_KERNEL_map)].pud);
> >  
> > +	addr[0] = (unsigned long)pgd;
> > +	addr[1] = (unsigned long)l3;
> > +	addr[2] = (unsigned long)l2;
> >  	/* Graft it onto L4[272][0]. Note that we creating an aliasing problem:
> >  	 * Both L4[272][0] and L4[511][511] have entries that point to the same
> >  	 * L2 (PMD) tables. Meaning that if you modify it in __va space
> > @@ -1782,20 +1804,24 @@ void __init xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn)
> >  	/* Unpin Xen-provided one */
> >  	pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(pgd)));
> >  
> > -	/* Switch over */
> > -	pgd = init_level4_pgt;
> > -
> >  	/*
> >  	 * At this stage there can be no user pgd, and no page
> >  	 * structure to attach it to, so make sure we just set kernel
> >  	 * pgd.
> >  	 */
> >  	xen_mc_batch();
> > -	__xen_write_cr3(true, __pa(pgd));
> > +	__xen_write_cr3(true, __pa(init_level4_pgt));
> >  	xen_mc_issue(PARAVIRT_LAZY_CPU);
> >  
> > -	memblock_reserve(__pa(xen_start_info->pt_base),
> > -			 xen_start_info->nr_pt_frames * PAGE_SIZE);
> > +	/* We can't that easily rip out L3 and L2, as the Xen pagetables are
> > +	 * set out this way: [L4], [L1], [L2], [L3], [L1], [L1] ...  for
> > +	 * the initial domain. For guests using the toolstack, they are in:
> > +	 * [L4], [L3], [L2], [L1], [L1], order .. */
> > +	for (i = 0; i < ARRAY_SIZE(addr); i++)
> > +		check_pt_base(&pt_base, &pt_end, addr[i]);
> 
> It is much clearer now, but if the comment is correct, doesn't it mean
> that we are going to be able to free pgd, l3 and l2 only in the non-dom0
> case?

And in dom0 case only PGD.

> If so it might be worth saying it explicitly.

OK.
> 
> Other than that, it is fine by me.
> 
> 
> > +	/* Our (by three pages) smaller Xen pagetable that we are using */
> > +	memblock_reserve(PFN_PHYS(pt_base), (pt_end - pt_base) * PAGE_SIZE);
> >  }
> >  #else	/* !CONFIG_X86_64 */
> >  static RESERVE_BRK_ARRAY(pmd_t, initial_kernel_pmd, PTRS_PER_PMD);
> > -- 
> > 1.7.7.6
> > 
> > 
> > _______________________________________________
> > Xen-devel mailing list
> > Xen-devel@lists.xen.org
> > http://lists.xen.org/xen-devel
> > 

  reply	other threads:[~2012-08-17 18:16 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-08-16 16:03 [PATCH] Boot PV guests with more than 128GB (v3) for v3.7 Konrad Rzeszutek Wilk
2012-08-16 16:03 ` [PATCH 01/11] xen/p2m: Fix the comment describing the P2M tree Konrad Rzeszutek Wilk
2012-08-17 17:29   ` [Xen-devel] " Stefano Stabellini
2012-08-16 16:03 ` [PATCH 02/11] xen/x86: Use memblock_reserve for sensitive areas Konrad Rzeszutek Wilk
2012-08-17 17:35   ` [Xen-devel] " Stefano Stabellini
2012-08-20 14:13     ` Konrad Rzeszutek Wilk
2012-08-21 17:27       ` Q:pt_base in COMPAT mode offset by two pages. Was:Re: " Konrad Rzeszutek Wilk
2012-08-21 19:03         ` Konrad Rzeszutek Wilk
2012-08-22 10:48           ` Stefano Stabellini
2012-08-22 14:00             ` Konrad Rzeszutek Wilk
2012-08-22 14:12           ` Jan Beulich
2012-08-22 14:41             ` Stefano Stabellini
2012-08-22 14:57             ` Konrad Rzeszutek Wilk
2012-08-22 15:59           ` Jan Beulich
2012-08-22 16:21             ` Konrad Rzeszutek Wilk
2012-08-22 18:55             ` [Xen-devel] Q:pt_base in COMPAT mode offset by two pages. Was:Re: " Konrad Rzeszutek Wilk
2012-08-23  6:23               ` Jan Beulich
2012-08-16 16:03 ` [PATCH 03/11] xen/mmu: The xen_setup_kernel_pagetable doesn't need to return anything Konrad Rzeszutek Wilk
2012-08-16 16:03 ` [PATCH 04/11] xen/mmu: Provide comments describing the _ka and _va aliasing issue Konrad Rzeszutek Wilk
2012-08-16 16:03 ` [PATCH 05/11] xen/mmu: use copy_page instead of memcpy Konrad Rzeszutek Wilk
2012-08-16 16:03 ` [PATCH 06/11] xen/mmu: For 64-bit do not call xen_map_identity_early Konrad Rzeszutek Wilk
2012-08-17 17:41   ` [Xen-devel] " Stefano Stabellini
2012-08-17 17:45     ` Konrad Rzeszutek Wilk
2012-08-20 11:45       ` Stefano Stabellini
2012-08-20 11:53         ` Ian Campbell
2012-08-20 11:58           ` Stefano Stabellini
2012-08-20 12:06             ` Konrad Rzeszutek Wilk
2012-08-20 12:19               ` Stefano Stabellini
2012-08-23 15:40             ` Konrad Rzeszutek Wilk
2012-08-23 15:57               ` Stefano Stabellini
2012-08-16 16:03 ` [PATCH 07/11] xen/mmu: Recycle the Xen provided L4, L3, and L2 pages Konrad Rzeszutek Wilk
2012-08-17 18:07   ` [Xen-devel] " Stefano Stabellini
2012-08-17 18:05     ` Konrad Rzeszutek Wilk [this message]
2012-08-16 16:03 ` [PATCH 08/11] xen/p2m: Add logic to revector a P2M tree to use __va leafs Konrad Rzeszutek Wilk
2012-08-16 16:03 ` [PATCH 09/11] xen/mmu: Copy and revector the P2M tree Konrad Rzeszutek Wilk
2012-08-16 16:03 ` [PATCH 10/11] xen/mmu: Remove from __ka space PMD entries for pagetables Konrad Rzeszutek Wilk
2012-08-16 16:03 ` [PATCH 11/11] xen/mmu: Release just the MFN list, not MFN list and part of pagetables Konrad Rzeszutek Wilk
2012-08-21 14:18   ` [Xen-devel] " Stefano Stabellini
2012-08-21 14:57     ` Konrad Rzeszutek Wilk
2012-08-21 15:27       ` Stefano Stabellini
2012-09-17 18:06   ` William Dauchy
2012-09-17 18:18     ` Konrad Rzeszutek Wilk
2012-08-17 17:39 ` [PATCH] Boot PV guests with more than 128GB (v3) for v3.7 Konrad Rzeszutek Wilk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120817180557.GA18579@phenom.dumpdata.com \
    --to=konrad.wilk@oracle.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stefano.stabellini@eu.citrix.com \
    --cc=xen-devel@lists.xensource.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).