Hi Bjorn,

Today's linux-next merge of the pci tree got a conflict in
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c between commit
8eee694c3e66 ("bnx2x: fix unload previous driver flow when flr-capable")
from Linus' tree and commit 2a80eebcbf3e ("bnx2x: Use PCI Express
Capability accessors") from the pci tree.

The former removes the function updated by the latter, so I just removed
the function (see below) and can carry the fix as necessary.
-- 
Cheers,
Stephen Rothwell                    sfr@canb.auug.org.au

diff --cc drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 2105498,281cf3f..0000000
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@@ -9372,29 -9378,28 +9366,25 @@@ static int __devinit bnx2x_prev_mark_pa
  	return rc;
  }
  
 -static bool __devinit bnx2x_can_flr(struct bnx2x *bp)
 -{
 -	u32 cap;
 -	struct pci_dev *dev = bp->pdev;
 -
 -	pcie_capability_read_dword(dev, PCI_EXP_DEVCAP, &cap);
 -	if (!(cap & PCI_EXP_DEVCAP_FLR))
 -		return false;
 -
 -	return true;
 -}
 -
  static int __devinit bnx2x_do_flr(struct bnx2x *bp)
  {
- 	int i, pos;
+ 	int i;
  	u16 status;
  	struct pci_dev *dev = bp->pdev;
  
 -	/* probe the capability first */
 -	if (bnx2x_can_flr(bp))
 -		return -ENOTTY;
 +
 +	if (CHIP_IS_E1x(bp)) {
 +		BNX2X_DEV_INFO("FLR not supported in E1/E1H\n");
 +		return -EINVAL;
 +	}
 +
 +	/* only bootcode REQ_BC_VER_4_INITIATE_FLR and onwards support flr */
 +	if (bp->common.bc_ver < REQ_BC_VER_4_INITIATE_FLR) {
 +		BNX2X_ERR("FLR not supported by BC_VER: 0x%x\n",
 +			  bp->common.bc_ver);
 +		return -EINVAL;
 +	}
  
- 	pos = pci_pcie_cap(dev);
- 	if (!pos)
- 		return -ENOTTY;
- 
  	/* Wait for Transaction Pending bit clean */
  	for (i = 0; i < 4; i++) {
  		if (i)