From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932822Ab2IDW3f (ORCPT ); Tue, 4 Sep 2012 18:29:35 -0400 Received: from mail160.messagelabs.com ([216.82.253.99]:43485 "EHLO mail160.messagelabs.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932695Ab2IDW3d convert rfc822-to-8bit (ORCPT ); Tue, 4 Sep 2012 18:29:33 -0400 X-Env-Sender: hartleys@visionengravers.com X-Msg-Ref: server-13.tower-160.messagelabs.com!1346797771!7781788!2 X-Originating-IP: [216.166.12.31] X-StarScan-Received: X-StarScan-Version: 6.6.1.3; banners=-,-,- X-VirusChecked: Checked From: H Hartley Sweeten To: Linux Kernel Subject: [PATCH 3/3] staging: comedi: addi_amcc_S5920.[ch]: remove unnecessary files Date: Tue, 4 Sep 2012 15:29:28 -0700 User-Agent: KMail/1.9.9 CC: , , MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8BIT Content-Disposition: inline Message-ID: <201209041529.28748.hartleys@visionengravers.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The addi_amcc_S5920.c file only has the function i_AddiHeaderRW_ReadEeprom() in it. The addi_amcc_S5920.h file has a prototype for this function and a couple defines for the magic numbers used when accessing the eeprom. The .c file is not actually built by any .config selection, or by an The .h file is only #include'd by the hwdrv_apci3200.c file. That file actually has a local version of the i_AddiHeaderRW_ReadEeprom() function that is identical to the one in the .c file. Just move the #define's from the .h file into hwdrv_apci3200.c and remove the addi_amcc_S5920.[ch] files. Signed-off-by: H Hartley Sweeten Cc: Ian Abbott Cc: Greg Kroah-Hartman --- .../comedi/drivers/addi-data/addi_amcc_S5920.c | 195 --------------------- .../comedi/drivers/addi-data/addi_amcc_S5920.h | 27 --- .../comedi/drivers/addi-data/hwdrv_apci3200.c | 12 +- 3 files changed, 7 insertions(+), 227 deletions(-) delete mode 100644 drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.c delete mode 100644 drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.h diff --git a/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.c b/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.c deleted file mode 100644 index b973095..0000000 --- a/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.c +++ /dev/null @@ -1,195 +0,0 @@ -/** -@verbatim - -Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. - - ADDI-DATA GmbH - Dieselstrasse 3 - D-77833 Ottersweier - Tel: +19(0)7223/9493-0 - Fax: +49(0)7223/9493-92 - http://www.addi-data.com - info@addi-data.com - -This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. - -This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - -You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - -You should also find the complete GPL in the COPYING file accompanying this source code. - -@endverbatim -*/ -/* - +-----------------------------------------------------------------------+ - | (C) ADDI-DATA GmbH Dieselstraße 3 D-77833 Ottersweier | - +-----------------------------------------------------------------------+ - | Tel : +49 (0) 7223/9493-0 | email : info@addi-data.com | - | Fax : +49 (0) 7223/9493-92 | Internet : http://www.addi-data.com | - +-------------------------------+---------------------------------------+ - | Project : ADDI HEADER READ WRITER | Compiler : Visual C++ | - | Module name : S5920.cpp | Version : 6.0 | - +-------------------------------+---------------------------------------+ - | Author : E. LIBS Date : 02/05/2002 | - +-----------------------------------------------------------------------+ - | Description : DLL with the S5920 PCI Controller functions | - +-----------------------------------------------------------------------+ - | UPDATE'S | - +-----------------------------------------------------------------------+ - | Date | Author | Description of updates | - +----------+-----------+------------------------------------------------+ - | 28/08/02 | LIBS Eric | Add return codes each time a function of the | - | | | Addi Library is called | - +-----------------------------------------------------------------------+ - | 31/07/03 | KRAUTH J. | Changes for the MSX-Box | - +-----------------------------------------------------------------------+ -*/ - -#include "addi_amcc_S5920.h" - -/*+----------------------------------------------------------------------------+*/ -/*| Function Name : int i_AddiHeaderRW_ReadEeprom |*/ -/*| (int i_NbOfWordsToRead, |*/ -/*| unsigned int dw_PCIBoardEepromAddress, |*/ -/*| unsigned short w_EepromStartAddress, |*/ -/*| unsigned short * pw_DataRead) |*/ -/*+----------------------------------------------------------------------------+*/ -/*| Task : Read word from the 5920 eeprom. |*/ -/*+----------------------------------------------------------------------------+*/ -/*| Input Parameters : int i_NbOfWordsToRead : Nbr. of word to read |*/ -/*| unsigned int dw_PCIBoardEepromAddress : Address of the eeprom |*/ -/*| unsigned short w_EepromStartAddress : Eeprom start address |*/ -/*+----------------------------------------------------------------------------+*/ -/*| Output Parameters : unsigned short * pw_DataRead : Read data |*/ -/*+----------------------------------------------------------------------------+*/ -/*| Return Value : - |*/ -/*+----------------------------------------------------------------------------+*/ - -int i_AddiHeaderRW_ReadEeprom(int i_NbOfWordsToRead, - unsigned int dw_PCIBoardEepromAddress, - unsigned short w_EepromStartAddress, unsigned short *pw_DataRead) -{ - unsigned int dw_eeprom_busy = 0; - int i_Counter = 0; - int i_WordCounter; - int i; - unsigned char pb_ReadByte[1]; - unsigned char b_ReadLowByte = 0; - unsigned char b_ReadHighByte = 0; - unsigned char b_SelectedAddressLow = 0; - unsigned char b_SelectedAddressHigh = 0; - unsigned short w_ReadWord = 0; - - for (i_WordCounter = 0; i_WordCounter < i_NbOfWordsToRead; - i_WordCounter++) { - do { - dw_eeprom_busy = - inl(dw_PCIBoardEepromAddress + - AMCC_OP_REG_MCSR); - dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY; - } while (dw_eeprom_busy == EEPROM_BUSY); - - for (i_Counter = 0; i_Counter < 2; i_Counter++) { - b_SelectedAddressLow = (w_EepromStartAddress + i_Counter) % 256; /* Read the low 8 bit part */ - b_SelectedAddressHigh = (w_EepromStartAddress + i_Counter) / 256; /* Read the high 8 bit part */ - - /* Select the load low address mode */ - outb(NVCMD_LOAD_LOW, - dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR + - 3); - - /* Wait on busy */ - do { - dw_eeprom_busy = - inl(dw_PCIBoardEepromAddress + - AMCC_OP_REG_MCSR); - dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY; - } while (dw_eeprom_busy == EEPROM_BUSY); - - /* Load the low address */ - outb(b_SelectedAddressLow, - dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR + - 2); - - /* Wait on busy */ - do { - dw_eeprom_busy = - inl(dw_PCIBoardEepromAddress + - AMCC_OP_REG_MCSR); - dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY; - } while (dw_eeprom_busy == EEPROM_BUSY); - - /* Select the load high address mode */ - outb(NVCMD_LOAD_HIGH, - dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR + - 3); - - /* Wait on busy */ - do { - dw_eeprom_busy = - inl(dw_PCIBoardEepromAddress + - AMCC_OP_REG_MCSR); - dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY; - } while (dw_eeprom_busy == EEPROM_BUSY); - - /* Load the high address */ - outb(b_SelectedAddressHigh, - dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR + - 2); - - /* Wait on busy */ - do { - dw_eeprom_busy = - inl(dw_PCIBoardEepromAddress + - AMCC_OP_REG_MCSR); - dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY; - } while (dw_eeprom_busy == EEPROM_BUSY); - - /* Select the READ mode */ - outb(NVCMD_BEGIN_READ, - dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR + - 3); - - /* Wait on busy */ - do { - dw_eeprom_busy = - inl(dw_PCIBoardEepromAddress + - AMCC_OP_REG_MCSR); - dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY; - } while (dw_eeprom_busy == EEPROM_BUSY); - - /* Read data into the EEPROM */ - *pb_ReadByte = - inb(dw_PCIBoardEepromAddress + - AMCC_OP_REG_MCSR + 2); - - /* Wait on busy */ - do { - dw_eeprom_busy = - inl(dw_PCIBoardEepromAddress + - AMCC_OP_REG_MCSR); - dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY; - } while (dw_eeprom_busy == EEPROM_BUSY); - - /* Select the upper address part */ - if (i_Counter == 0) - b_ReadLowByte = pb_ReadByte[0]; - else - b_ReadHighByte = pb_ReadByte[0]; - - /* Sleep */ - msleep(1); - - } - w_ReadWord = - (b_ReadLowByte | (((unsigned short)b_ReadHighByte) * - 256)); - - pw_DataRead[i_WordCounter] = w_ReadWord; - - w_EepromStartAddress += 2; /* to read the next word */ - - } /* for (...) i_NbOfWordsToRead */ - return 0; -} diff --git a/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.h b/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.h deleted file mode 100644 index 9afdb13..0000000 --- a/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. - * - * ADDI-DATA GmbH - * Dieselstrasse 3 - * D-77833 Ottersweier - * Tel: +19(0)7223/9493-0 - * Fax: +49(0)7223/9493-92 - * http://www.addi-data.com - * info@addi-data.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 of the License, or (at your option) - * any later version. - */ - -#define AMCC_OP_REG_MCSR 0x3c -#define EEPROM_BUSY 0x80000000 -#define NVCMD_LOAD_LOW (0x4 << 5) /* nvRam load low command */ -#define NVCMD_LOAD_HIGH (0x5 << 5) /* nvRam load high command */ -#define NVCMD_BEGIN_READ (0x7 << 5) /* nvRam begin read command */ -#define NVCMD_BEGIN_WRITE (0x6 << 5) /* EEPROM begin write command */ - -int i_AddiHeaderRW_ReadEeprom(int i_NbOfWordsToRead, - unsigned int dw_PCIBoardEepromAddress, - unsigned short w_EepromStartAddress, unsigned short *pw_DataRead); diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c index f9545b0..5aed4a1 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c @@ -57,11 +57,8 @@ You should also find the complete GPL in the COPYING file accompanying this sour +----------------------------------------------------------------------------+ */ #include "hwdrv_apci3200.h" -/* Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ -#include "addi_amcc_S5920.h" -/* #define PRINT_INFO */ -/* End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ +/* #define PRINT_INFO */ /* BEGIN JK 06.07.04: Management of sevrals boards */ /* @@ -90,7 +87,12 @@ You should also find the complete GPL in the COPYING file accompanying this sour struct str_BoardInfos s_BoardInfos[100]; /* 100 will be the max number of boards to be used */ /* END JK 06.07.04: Management of sevrals boards */ -/* Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ +#define AMCC_OP_REG_MCSR 0x3c +#define EEPROM_BUSY 0x80000000 +#define NVCMD_LOAD_LOW (0x4 << 5) /* nvRam load low command */ +#define NVCMD_LOAD_HIGH (0x5 << 5) /* nvRam load high command */ +#define NVCMD_BEGIN_READ (0x7 << 5) /* nvRam begin read command */ +#define NVCMD_BEGIN_WRITE (0x6 << 5) /* EEPROM begin write command */ /*+----------------------------------------------------------------------------+*/ /*| Function Name : int i_AddiHeaderRW_ReadEeprom |*/ -- 1.7.11