On Tue, Oct 23, 2012 at 04:27:03PM -0400, Nick Bowler wrote:
>
> Just FYI, I sent a patch to fix the same bug a while back
>
>   https://patchwork.kernel.org/patch/1156361/
>
> together with other patches to fix early printk on the ZC702 serial
> console.  Admittedly, I dropped the ball on these as other issues
> came up so I was away from the Zynq for a while.
>
> However, I'm now getting back on the Zynq and have a bunch of patches to
> make it all work on the ZC702 board.  I've respun the ZC702 early boot
> fixes against newer git but they're obviously going to conflict with
> this series.  Should I resend them anyway?

If you have other fixes for the zc702, that'd be great.  Most of my
testing has been in a qemu model; I haven't had a chance to try getting
the zc702 booting yet.

The first stumbling block is that it looks like the secondary uart is
the primary uart on the zc702.

> I also have a DT binding for the TTC driver, I can send that.

That'd be great!

Thanks,

  Josh