From: roman@hodek.net
To: linux-kernel@vger.kernel.org
Cc: alan@lxorguk.ukuu.org.uk, patrik.r.jakobsson@gmail.com,
christian.gmeiner@gmail.com
Date: Wed, 21 Nov 2012 15:04:42 +0100 [thread overview]
raw)
Hi,
I've found your discussion about a gma500 Atom E6xx graphics device with PCI
ID 0x4108. I'm currently working on such a box, too.
There are two variants of my hardware, one with LVDS output for smaller
panels, and one with a Chrontel 7308 SDVO->LVDS converter for larger ones. My
HW developer says the platform is called "Little Bay" and similar to Queens
Bay.
Anyway, the small LVDS one works fine so far, at least when I hardcode the
panel resolution (there's no VBT etc. in BIOS yet). However, the SDVO one
stays black. No wonder, as there's no SDVO code in the Oaktrail part of the
driver.
So I tried to add this... and simply started with adding a call to
psb_intel_sdvo_init() in oaktrail_output_init(), to see what happens. The
result: it doesn't find anything :-( I could track problems down to the point
that the SDVO i2c registers seem to be the wrong ones.
At the known offsets for i2c regs (0x5100 and on) I see only 0xffffffff, so
probably these registers are not present or somewhere else on my platform.
Does anybody of you have any infos on this? How can I get further?
Thanks for any help in advance!
Roman
PS: Please keep me in Cc:, I'm not subscribed to LKML.
next reply other threads:[~2012-11-21 14:12 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-21 14:04 roman [this message]
2012-11-21 14:50 ` Alan Cox
2012-11-21 16:38 ` SDVO on E6xx roman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121121140442.782733@zweiblum.hodek.net \
--to=roman@hodek.net \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=christian.gmeiner@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=patrik.r.jakobsson@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).