From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755930Ab2K1TFd (ORCPT ); Wed, 28 Nov 2012 14:05:33 -0500 Received: from e9.ny.us.ibm.com ([32.97.182.139]:50529 "EHLO e9.ny.us.ibm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755193Ab2K1TFb (ORCPT ); Wed, 28 Nov 2012 14:05:31 -0500 Date: Wed, 28 Nov 2012 13:04:38 -0600 From: Kent Yoder To: Mathias LEBLANC Cc: Kent Yoder , Jean-Luc BLANC , "linux-kernel@vger.kernel.org" , Rajiv Andrade , "tpmdd-devel@lists.sourceforge.net" , Sirrix AG Subject: Re: [tpmdd-devel] [PATCH 1/1] TPM: STMicroelectronics ST33 I2C KERNEL 3.x.x Message-ID: <20121128190438.GA15399@ennui.austin.ibm.com> References: <1353363322-2923-1-git-send-email-mathias.leblanc@st.com> <20121126174632.GA12737@ennui.austin.ibm.com> <35286B1AE75A7C47BFF0870081A31B4B3A9B501754@SAFEX1MAIL4.st.com> <35286B1AE75A7C47BFF0870081A31B4B3A9B501755@SAFEX1MAIL4.st.com> <35286B1AE75A7C47BFF0870081A31B4B3A9B501757@SAFEX1MAIL4.st.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <35286B1AE75A7C47BFF0870081A31B4B3A9B501757@SAFEX1MAIL4.st.com> User-Agent: Mutt/1.5.21 (2010-09-15) X-Content-Scanned: Fidelis XPS MAILER x-cbid: 12112819-7182-0000-0000-000003646AA5 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Wed, Nov 28, 2012 at 06:48:57PM +0100, Mathias LEBLANC wrote: > Ok, so i have patch the ST33 I2C driver on this branch and correct some errors. > I send you the patch for the kernel 3.x > I have no error on compilation, tell me if you have problems. > I have implemented the tpm_do_selftest function to get the tpm ready, but it can be removed This looks like its base64 encoded... > ________________________________________ > From: Kent Yoder [shpedoikal@gmail.com] > Sent: 28 November 2012 16:31 > To: Mathias LEBLANC > Cc: Kent Yoder; Jean-Luc BLANC; linux-kernel@vger.kernel.org; Rajiv Andrade; tpmdd-devel@lists.sourceforge.net; Sirrix AG > Subject: Re: [tpmdd-devel] [PATCH 1/1] TPM: STMicroelectronics ST33 I2C KERNEL 3.x.x > > On Wed, Nov 28, 2012 at 2:54 AM, Mathias LEBLANC wrote: > > Hi Kent, > > > > I have been tried the patch on your linux branch and indeed, i have an error about tpm_continue_seftest. > > What is the kernel I should use to test officially my patch? Because i saw a lot of different version of linux kernel with the tpm_continue_seftest function. > > I used this repo git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 for my tests. > > The tree url I sent you is the correct one. Make sure you use the > "next" branch. > > Kent > > > Matthias Leblanc > > > > ________________________________________From: Kent Yoder [shpedoikal@gmail.com] > > Sent: 27 November 2012 15:48 > > To: Mathias LEBLANC > > Cc: Kent Yoder; Jean-Luc BLANC; linux-kernel@vger.kernel.org; Rajiv Andrade; tpmdd-devel@lists.sourceforge.net; Sirrix AG > > Subject: Re: [tpmdd-devel] [PATCH 1/1] TPM: STMicroelectronics ST33 I2C KERNEL 3.x.x > > > > On Tue, Nov 27, 2012 at 2:44 AM, Mathias LEBLANC wrote: > >> Hi Kent, > >> > >> What's version of the kernel do you compiled? > >> I don't understand why you have some problem with formating, i have send you the patch with no error and warning of code formating. > >> The tpm_continue_selftest_nocheck() (in kernel 3.x.x) and tpm_continue_selftest() (in kernel 2.6.x) is called to have the tpm ready. > >> If the tpm_continue_selftest is not called by the driver, it will be use in the applications. > > > > Apply against this tree's "next" branch. > > > > git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security.git > > > > Thanks, > > Kent > > > >> Regards, > >> > >> Matthias Leblanc > >> ________________________________________ > >> From: Kent Yoder [key@linux.vnet.ibm.com] > >> Sent: 26 November 2012 18:46 > >> To: Mathias LEBLANC > >> Cc: Rajiv Andrade; Marcel Selhorst; Sirrix AG; tpmdd-devel@lists.sourceforge.net; Debora Velarde; linux-kernel@vger.kernel.org; Jean-Luc BLANC > >> Subject: Re: [PATCH 1/1] TPM: STMicroelectronics ST33 I2C KERNEL 3.x.x > >> > >> Hi Mathias, > >> > >> On Mon, Nov 19, 2012 at 11:15:21PM +0100, Mathias Leblanc wrote: > >>> * STMicroelectronics version 1.2.0, Copyright (C) 2010 > >>> * STMicroelectronics comes with ABSOLUTELY NO WARRANTY. > >>> * This is free software, and you are welcome to redistribute it > >>> * under certain conditions. > >> > >>> This is the driver for TPM chip from ST Microelectronics. > >>> > >>> If you have a TPM security chip from STMicroelectronics working with > >>> an I2C, in menuconfig or .config choose the tpm driver on > >>> device --> tpm and activate the protocol of your choice before compiling > >>> the kernel. > >>> The driver will be accessible from within Linux. > >>> > >>> Tested on linux x86/x64, beagleboard REV B & XM REV C and CHROMIUM OS > >>> on kernel 3.x.x > >>> > >>> Signed-off-by: Mathias Leblanc > >>> --- > >>> drivers/char/tpm/tpm_stm_st33_i2c.c | 903 ++++++++++++++++++++++++++++++++++ > >>> drivers/char/tpm/tpm_stm_st33_i2c.h | 81 +++ > >>> include/linux/i2c/tpm_stm_st33_i2c.h | 47 ++ > >>> 3 files changed, 1031 insertions(+) > >>> create mode 100644 drivers/char/tpm/tpm_stm_st33_i2c.c > >>> create mode 100644 drivers/char/tpm/tpm_stm_st33_i2c.h > >>> create mode 100644 include/linux/i2c/tpm_stm_st33_i2c.h > >> > >> I'm still getting the compiler errors I mentioned earlier. I've fixed > >> them up with the patch below (plus some formatting), all except for the > >> tpm_continue_selftest_nocheck() problem. Do you really need to call > >> continue selftest on resume? That strikes me as out of place here. > >> What's making the call to the TPM to start the self test in that case? > >> > >> Please test with the patch below. > >> > >> Thanks, > >> Kent > >> > >> > >> diff --git a/drivers/char/tpm/tpm_stm_st33_i2c.c b/drivers/char/tpm/tpm_stm_st33_i2c.c > >> index 52f3380..67f81b6 100644 > >> --- a/drivers/char/tpm/tpm_stm_st33_i2c.c > >> +++ b/drivers/char/tpm/tpm_stm_st33_i2c.c > >> @@ -722,7 +722,7 @@ tpm_st33_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) > >> goto _irq_set; > >> > >> intmask = TPM_GLOBAL_INT_ENABLE; > >> - err = I2C_WRITE_DATA(client, TPM_INT_ENABLE + 3, &intmask, 1); > >> + err = I2C_WRITE_DATA(client, (TPM_INT_ENABLE + 3), &intmask, 1); > >> if (err < 0) > >> goto _irq_set; > >> > >> @@ -820,10 +820,10 @@ static int tpm_st33_i2c_pm_suspend(struct i2c_client *client, pm_message_t mesg) > >> > >> if (power_mgt) > >> gpio_set_value(pin_infos->io_lpcpd, 0); > >> - else{ > >> + else { > >> if (chip->data_buffer == NULL) > >> chip->data_buffer = pin_infos->tpm_i2c_buffer[0]; > >> - ret = tpm_pm_suspend(&client->dev, mesg); > >> + ret = tpm_pm_suspend(&client->dev); > >> } > >> return ret; > >> } /* tpm_st33_i2c_suspend() */ > >> @@ -848,12 +848,12 @@ static int tpm_st33_i2c_pm_resume(struct i2c_client *client) > >> (chip->vendor.status(chip) && > >> TPM_STS_VALID) == TPM_STS_VALID, > >> chip->vendor.timeout_b); > >> - } else{ > >> - if (chip->data_buffer == NULL) > >> - chip->data_buffer = pin_infos->tpm_i2c_buffer[0]; > >> - ret = tpm_pm_resume(&client->dev); > >> - if (!ret) > >> - tpm_continue_selftest_nocheck(chip); > >> + } else { > >> + if (chip->data_buffer == NULL) > >> + chip->data_buffer = pin_infos->tpm_i2c_buffer[0]; > >> + ret = tpm_pm_resume(&client->dev); > >> + if (!ret) > >> + tpm_continue_selftest_nocheck(chip); > >> } > >> return ret; > >> } /* tpm_st33_i2c_pm_resume() */ > >> > >> ------------------------------------------------------------------------------ > >> Monitor your physical, virtual and cloud infrastructure from a single > >> web console. Get in-depth insight into apps, servers, databases, vmware, > >> SAP, cloud infrastructure, etc. Download 30-day Free Trial. > >> Pricing starts from $795 for 25 servers or applications! > >> http://p.sf.net/sfu/zoho_dev2dev_nov > >> _______________________________________________ > >> tpmdd-devel mailing list > >> tpmdd-devel@lists.sourceforge.net > >> https://lists.sourceforge.net/lists/listinfo/tpmdd-devel > > > > > > > > -- > > IBM LTC Security > > > > -- > IBM LTC Security > From 3cf4687665a0bcffe89de92416f0d5886a90100f Mon Sep 17 00:00:00 2001 > From: Mathias Leblanc > Date: Wed, 28 Nov 2012 18:22:24 +0100 > Subject: [PATCH 1/1] TPM: STMicroelectronics ST33 I2C KERNEL 3.x > > * STMicroelectronics version 1.2.0, Copyright (C) 2010 > * STMicroelectronics comes with ABSOLUTELY NO WARRANTY. > * This is free software, and you are welcome to redistribute it > * under certain conditions. > > This is the driver for TPM chip from ST Microelectronics. > > If you have a TPM security chip from STMicroelectronics working with > an I2C, in menuconfig or .config choose the tpm driver on > device --> tpm and activate the protocol of your choice before compiling > the kernel. > The driver will be accessible from within Linux. > > Tested on linux x86/x64 on kernel 3.x > > Signed-off-by: Mathias Leblanc > --- > drivers/char/tpm/tpm_stm_st33_i2c.c | 903 ++++++++++++++++++++++++++++++++++ > drivers/char/tpm/tpm_stm_st33_i2c.h | 81 +++ > include/linux/i2c/tpm_stm_st33_i2c.h | 47 ++ > 3 files changed, 1031 insertions(+) > create mode 100644 drivers/char/tpm/tpm_stm_st33_i2c.c > create mode 100644 drivers/char/tpm/tpm_stm_st33_i2c.h > create mode 100644 include/linux/i2c/tpm_stm_st33_i2c.h > > diff --git a/drivers/char/tpm/tpm_stm_st33_i2c.c b/drivers/char/tpm/tpm_stm_st33_i2c.c > new file mode 100644 > index 0000000..32cdd5e > --- /dev/null > +++ b/drivers/char/tpm/tpm_stm_st33_i2c.c > @@ -0,0 +1,903 @@ > +/* > + * STMicroelectronics TPM I2C Linux driver for TPM ST33ZP24 > + * Copyright (C) 2009, 2010 STMicroelectronics > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License along > + * with this program; if not, write to the Free Software Foundation, Inc., > + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. > + * > + * STMicroelectronics version 1.2.0, Copyright (C) 2010 > + * STMicroelectronics comes with ABSOLUTELY NO WARRANTY. > + * This is free software, and you are welcome to redistribute it > + * under certain conditions. > + * > + * @Author: Christophe RICARD tpmsupport@st.com > + * > + * @File: tpm_stm_st33_i2c.c > + * > + * @Synopsis: > + * 09/15/2010: First shot driver tpm_tis driver for > + lpc is used as model. > + */ > + > +#include > + > +#include "tpm_stm_st33_i2c.h" > + > +enum stm33zp24_access { > + TPM_ACCESS_VALID = 0x80, > + TPM_ACCESS_ACTIVE_LOCALITY = 0x20, > + TPM_ACCESS_REQUEST_PENDING = 0x04, > + TPM_ACCESS_REQUEST_USE = 0x02, > +}; > + > +enum stm33zp24_status { > + TPM_STS_VALID = 0x80, > + TPM_STS_COMMAND_READY = 0x40, > + TPM_STS_GO = 0x20, > + TPM_STS_DATA_AVAIL = 0x10, > + TPM_STS_DATA_EXPECT = 0x08, > +}; > + > +enum stm33zp24_int_flags { > + TPM_GLOBAL_INT_ENABLE = 0x80, > + TPM_INTF_CMD_READY_INT = 0x080, > + TPM_INTF_FIFO_AVALAIBLE_INT = 0x040, > + TPM_INTF_WAKE_UP_READY_INT = 0x020, > + TPM_INTF_LOCALITY_CHANGE_INT = 0x004, > + TPM_INTF_STS_VALID_INT = 0x002, > + TPM_INTF_DATA_AVAIL_INT = 0x001, > +}; > + > +enum tis_defaults { > + TIS_SHORT_TIMEOUT = 750, > + TIS_LONG_TIMEOUT = 2000, > +}; > + > +/* > + * write8_reg > + * Send byte to the TIS register according to the ST33ZP24 I2C protocol. > + * @param: tpm_register, the tpm tis register where the data should be written > + * @param: tpm_data, the tpm_data to write inside the tpm_register > + * @param: tpm_size, The length of the data > + * @return: Returns negative errno, or else the number of bytes written. > + */ > +static int write8_reg(struct i2c_client *client, u8 tpm_register, > + u8 *tpm_data, u16 tpm_size) > +{ > + u8 data; > + int value = 0; > + struct st33zp24_platform_data *pin_infos; > + > + pin_infos = client->dev.platform_data; > + > + data = tpm_register; > + memcpy(pin_infos->tpm_i2c_buffer[0], &data, sizeof(data)); > + memcpy(pin_infos->tpm_i2c_buffer[0] + 1, tpm_data, tpm_size); > + value = i2c_master_send(client, pin_infos->tpm_i2c_buffer[0], > + tpm_size + 1); > + return value; > +} /* write8_reg() */ > + > +/* > + * read8_reg > + * Recv byte from the TIS register according to the ST33ZP24 I2C protocol. > + * @param: tpm_register, the tpm tis register where the data should be read > + * @param: tpm_data, the TPM response > + * @param: tpm_size, tpm TPM response size to read. > + * @return: number of byte read successfully: should be one if success. > + */ > +static int read8_reg(struct i2c_client *client, u8 tpm_register, > + u8 *tpm_data, int tpm_size) > +{ > + u8 status = 0; > + u8 data; > + struct st33zp24_platform_data *pin_infos; > + > + pin_infos = client->dev.platform_data; > + > + data = TPM_DUMMY_BYTE; > + status = write8_reg(client, tpm_register, &data, 1); > + if (status == 2) > + status = i2c_master_recv(client, tpm_data, tpm_size); > + return status; > +} /* read8_reg() */ > + > +/* > + * I2C_WRITE_DATA > + * Send byte to the TIS register according to the ST33ZP24 I2C protocol. > + * @param: client, the chip description > + * @param: tpm_register, the tpm tis register where the data should be written > + * @param: tpm_data, the tpm_data to write inside the tpm_register > + * @param: tpm_size, The length of the data > + * @return: number of byte written successfully: should be one if success. > + */ > +#define I2C_WRITE_DATA(client, tpm_register, tpm_data, tpm_size) \ > + (write8_reg(client, tpm_register | \ > + TPM_WRITE_DIRECTION, tpm_data, tpm_size)) > + > +/* > + * I2C_READ_DATA > + * Recv byte from the TIS register according to the ST33ZP24 I2C protocol. > + * @param: tpm, the chip description > + * @param: tpm_register, the tpm tis register where the data should be read > + * @param: tpm_data, the TPM response > + * @param: tpm_size, tpm TPM response size to read. > + * @return: number of byte read successfully: should be one if success. > + */ > +#define I2C_READ_DATA(client, tpm_register, tpm_data, tpm_size) \ > + (read8_reg(client, tpm_register, tpm_data, tpm_size)) > + > +/* > + * clear_interruption > + * clear the TPM interrupt register. > + * @param: tpm, the chip description > + */ > +static void clear_interruption(struct i2c_client *client) > +{ > + u8 interrupt; > + I2C_READ_DATA(client, TPM_INT_STATUS, &interrupt, 1); > + I2C_WRITE_DATA(client, TPM_INT_STATUS, &interrupt, 1); > + I2C_READ_DATA(client, TPM_INT_STATUS, &interrupt, 1); > +} /* clear_interruption() */ > + > +/* > + * _wait_for_interrupt_serirq_timeout > + * @param: tpm, the chip description > + * @param: timeout, the timeout of the interrupt > + * @return: the status of the interruption. > + */ > +static long _wait_for_interrupt_serirq_timeout(struct tpm_chip *chip, > + unsigned long timeout) > +{ > + long status; > + struct i2c_client *client; > + struct st33zp24_platform_data *pin_infos; > + > + client = (struct i2c_client *) chip->vendor.iobase; > + pin_infos = client->dev.platform_data; > + > + status = wait_for_completion_interruptible_timeout( > + &pin_infos->irq_detection, > + timeout); > + if (status > 0) > + enable_irq(gpio_to_irq(pin_infos->io_serirq)); > + gpio_direction_input(pin_infos->io_serirq); > + > + return status; > +} /* wait_for_interrupt_serirq_timeout() */ > + > +int wait_for_serirq_timeout(struct tpm_chip *chip, bool condition, > + unsigned long timeout) > +{ > + int status = 2; > + struct i2c_client *client; > + struct st33zp24_platform_data *pin_infos; > + > + client = (struct i2c_client *) chip->vendor.iobase; > + pin_infos = client->dev.platform_data; > + > + status = _wait_for_interrupt_serirq_timeout(chip, timeout); > + if (!status) { > + status = -EBUSY; > + } else{ > + clear_interruption(client); > + if (condition) > + status = 1; > + } > + return status; > +} > + > +/* > + * tpm_stm_i2c_cancel, cancel is not implemented. > + * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h > + */ > +static void tpm_stm_i2c_cancel(struct tpm_chip *chip) > +{ > + struct i2c_client *client; > + u8 data; > + > + client = (struct i2c_client *) chip->vendor.iobase; > + > + data = TPM_STS_COMMAND_READY; > + I2C_WRITE_DATA(client, TPM_STS, &data, 1); > + if (chip->vendor.irq) > + wait_for_serirq_timeout(chip, 1, chip->vendor.timeout_a); > +} /* tpm_stm_i2c_cancel() */ > + > +/* > + * tpm_stm_spi_status return the TPM_STS register > + * @param: chip, the tpm chip description > + * @return: the TPM_STS register value. > + */ > +static u8 tpm_stm_i2c_status(struct tpm_chip *chip) > +{ > + struct i2c_client *client; > + u8 data; > + client = (struct i2c_client *) chip->vendor.iobase; > + > + I2C_READ_DATA(client, TPM_STS, &data, 1); > + return data; > +} /* tpm_stm_i2c_status() */ > + > + > +/* > + * check_locality if the locality is active > + * @param: chip, the tpm chip description > + * @return: the active locality or -EACCESS. > + */ > +static int check_locality(struct tpm_chip *chip) > +{ > + struct i2c_client *client; > + u8 data; > + u8 status; > + > + client = (struct i2c_client *) chip->vendor.iobase; > + > + status = I2C_READ_DATA(client, TPM_ACCESS, &data, 1); > + if (status && (data & > + (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) == > + (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) > + return chip->vendor.locality; > + > + return -EACCES; > + > +} /* check_locality() */ > + > +/* > + * request_locality request the TPM locality > + * @param: chip, the chip description > + * @return: the active locality or EACCESS. > + */ > +static int request_locality(struct tpm_chip *chip) > +{ > + unsigned long stop; > + long rc; > + struct i2c_client *client; > + u8 data; > + > + client = (struct i2c_client *) chip->vendor.iobase; > + > + if (check_locality(chip) == chip->vendor.locality) > + return chip->vendor.locality; > + > + data = TPM_ACCESS_REQUEST_USE; > + rc = I2C_WRITE_DATA(client, TPM_ACCESS, &data, 1); > + if (rc < 0) > + goto end; > + > + if (chip->vendor.irq) { > + rc = wait_for_serirq_timeout(chip, (check_locality > + (chip) >= 0), > + chip->vendor.timeout_a); > + if (rc > 0) > + return chip->vendor.locality; > + } else{ > + stop = jiffies + chip->vendor.timeout_a; > + do { > + if (check_locality(chip) >= 0) > + return chip->vendor.locality; > + msleep(TPM_TIMEOUT); > + } while (time_before(jiffies, stop)); > + } > + rc = -EACCES; > +end: > + return rc; > +} /* request_locality() */ > + > +/* > + * release_locality release the active locality > + * @param: chip, the tpm chip description. > + */ > +static void release_locality(struct tpm_chip *chip) > +{ > + struct i2c_client *client; > + u8 data; > + > + client = (struct i2c_client *) chip->vendor.iobase; > + data = TPM_ACCESS_ACTIVE_LOCALITY; > + > + I2C_WRITE_DATA(client, TPM_ACCESS, &data, 1); > +} > + > +/* > + * get_burstcount return the burstcount address 0x19 0x1A > + * @param: chip, the chip description > + * return: the burstcount. > + */ > +static int get_burstcount(struct tpm_chip *chip) > +{ > + unsigned long stop; > + int burstcnt, status; > + u8 tpm_reg, temp; > + > + struct i2c_client *client = (struct i2c_client *) chip->vendor.iobase; > + > + stop = jiffies + chip->vendor.timeout_d; > + do { > + tpm_reg = TPM_STS + 1; > + status = I2C_READ_DATA(client, tpm_reg, &temp, 1); > + if (status < 0) > + goto end; > + > + tpm_reg = tpm_reg + 1; > + burstcnt = temp; > + status = I2C_READ_DATA(client, tpm_reg, &temp, 1); > + if (status < 0) > + goto end; > + > + burstcnt |= temp << 8; > + if (burstcnt) > + return burstcnt; > + msleep(TPM_TIMEOUT); > + } while (time_before(jiffies, stop)); > + > +end: > + return -EBUSY; > +} /* get_burstcount() */ > + > +/* > + * wait_for_stat wait for a TPM_STS value > + * @param: chip, the tpm chip description > + * @param: mask, the value mask to wait > + * @param: timeout, the timeout > + * @param: queue, the wait queue. > + * @return: the tpm status, 0 if success, -ETIME if timeout is reached. > + */ > +static int wait_for_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout, > + wait_queue_head_t *queue) > +{ > + unsigned long stop; > + long rc; > + u8 status; > + > + if (chip->vendor.irq) { > + rc = wait_for_serirq_timeout(chip, ((tpm_stm_i2c_status > + (chip) & mask) == > + mask), timeout); > + if (rc > 0) > + return 0; > + } else{ > + stop = jiffies + timeout; > + do { > + msleep(TPM_TIMEOUT); > + status = tpm_stm_i2c_status(chip); > + if ((status & mask) == mask) > + return 0; > + } while (time_before(jiffies, stop)); > + } > + return -ETIME; > +} /* wait_for_stat() */ > + > +/* > + * recv_data receive data > + * @param: chip, the tpm chip description > + * @param: buf, the buffer where the data are received > + * @param: count, the number of data to receive > + * @return: the number of bytes read from TPM FIFO. > + */ > +static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count) > +{ > + int size = 0, burstcnt, len; > + struct i2c_client *client; > + > + client = (struct i2c_client *) chip->vendor.iobase; > + > + while (size < count && > + wait_for_stat(chip, > + TPM_STS_DATA_AVAIL | TPM_STS_VALID, > + chip->vendor.timeout_c, > + &chip->vendor.read_queue) > + == 0) { > + burstcnt = get_burstcount(chip); > + len = min_t(int, burstcnt, count - size); > + I2C_READ_DATA(client, TPM_DATA_FIFO, buf + size, len); > + size += len; > + } > + return size; > +} > + > +/* > + * tpm_ioserirq_handler the serirq irq handler > + * @param: irq, the tpm chip description > + * @param: dev_id, the description of the chip > + * @return: the status of the handler. > + */ > +static irqreturn_t tpm_ioserirq_handler(int irq, void *dev_id) > +{ > + struct tpm_chip *chip = dev_id; > + struct i2c_client *client; > + struct st33zp24_platform_data *pin_infos; > + > + disable_irq_nosync(irq); > + > + client = (struct i2c_client *) chip->vendor.iobase; > + pin_infos = client->dev.platform_data; > + > + complete(&pin_infos->irq_detection); > + return IRQ_HANDLED; > +} /* tpm_ioserirq_handler() */ > + > + > +/* > + * tpm_stm_i2c_send send TPM commands through the I2C bus. > + * > + * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h > + * @param: buf, the buffer to send. > + * @param: count, the number of bytes to send. > + * @return: In case of success the number of bytes sent. > + * In other case, a < 0 value describing the issue. > + */ > +static int tpm_stm_i2c_send(struct tpm_chip *chip, unsigned char *buf, > + size_t len) > +{ > + u32 ret = 0, ordinal, > + status, > + burstcnt = 0, i, size; > + u8 data; > + struct i2c_client *client; > + struct st33zp24_platform_data *pin_infos; > + > + if (chip == NULL) > + return -EBUSY; > + if (len < TPM_HEADER_SIZE) > + return -EBUSY; > + > + client = (struct i2c_client *)chip->vendor.iobase; > + pin_infos = client->dev.platform_data; > + > + ordinal = be32_to_cpu(*((__be32 *) (buf + 6))); > + > + client->flags = 0; > + > + ret = request_locality(chip); > + if (ret < 0) > + return ret; > + > + status = tpm_stm_i2c_status(chip); > + if ((status & TPM_STS_COMMAND_READY) == 0) { > + tpm_stm_i2c_cancel(chip); > + if (wait_for_stat > + (chip, TPM_STS_COMMAND_READY, chip->vendor.timeout_b, > + &chip->vendor.int_queue) < 0) { > + ret = -ETIME; > + goto out_err; > + } > + } > + > + for (i = 0 ; i < len - 1 ;) { > + burstcnt = get_burstcount(chip); > + size = min_t(int, len - i - 1, burstcnt); > + ret = I2C_WRITE_DATA(client, TPM_DATA_FIFO, buf, size); > + if (ret < 0) > + goto out_err; > + > + i += size; > + } > + > + status = tpm_stm_i2c_status(chip); > + if ((status & TPM_STS_DATA_EXPECT) == 0) { > + ret = -EIO; > + goto out_err; > + } > + > + ret = I2C_WRITE_DATA(client, TPM_DATA_FIFO, buf + len - 1, 1); > + if (ret < 0) > + goto out_err; > + > + status = tpm_stm_i2c_status(chip); > + if ((status & TPM_STS_DATA_EXPECT) != 0) { > + ret = -EIO; > + goto out_err; > + } > + > + data = TPM_STS_GO; > + I2C_WRITE_DATA(client, TPM_STS, &data, 1); > + > + return len; > +out_err: > + tpm_stm_i2c_cancel(chip); > + release_locality(chip); > + return ret; > +} > + > +/* > + * tpm_stm_i2c_recv received TPM response through the I2C bus. > + * @param: chip, the tpm_chip description as specified in driver/char/tpm/tpm.h. > + * @param: buf, the buffer to store datas. > + * @param: count, the number of bytes to send. > + * @return: In case of success the number of bytes received. > + * In other case, a < 0 value describing the issue. > + */ > +static int tpm_stm_i2c_recv(struct tpm_chip *chip, unsigned char *buf, > + size_t count) > +{ > + int size = 0; > + int expected; > + > + struct i2c_client *client; > + struct st33zp24_platform_data *pin_infos; > + > + client = (struct i2c_client *)chip->vendor.iobase; > + pin_infos = client->dev.platform_data; > + > + > + if (chip == NULL) > + return -EBUSY; > + > + if (count < TPM_HEADER_SIZE) { > + size = -EIO; > + goto out; > + } > + > + size = recv_data(chip, buf, TPM_HEADER_SIZE); > + if (size < TPM_HEADER_SIZE) { > + dev_err(chip->dev, "Unable to read header\n"); > + goto out; > + } > + > + expected = be32_to_cpu(*(__be32 *) (buf + 2)); > + if (expected > count) { > + size = -EIO; > + goto out; > + } > + > + size += recv_data(chip, &buf[TPM_HEADER_SIZE], > + expected - TPM_HEADER_SIZE); > + if (size < expected) { > + dev_err(chip->dev, "Unable to read remainder of result\n"); > + size = -ETIME; > + goto out; > + } > + > +out: > + chip->vendor.cancel(chip); > + release_locality(chip); > + return size; > +} > + > +static const struct file_operations tpm_st33_i2c_fops = { > + .owner = THIS_MODULE, > + .llseek = no_llseek, > + .read = tpm_read, > + .write = tpm_write, > + .open = tpm_open, > + .release = tpm_release, > +}; > + > +static DEVICE_ATTR(pubek, S_IRUGO, tpm_show_pubek, NULL); > +static DEVICE_ATTR(pcrs, S_IRUGO, tpm_show_pcrs, NULL); > +static DEVICE_ATTR(enabled, S_IRUGO, tpm_show_enabled, NULL); > +static DEVICE_ATTR(active, S_IRUGO, tpm_show_active, NULL); > +static DEVICE_ATTR(owned, S_IRUGO, tpm_show_owned, NULL); > +static DEVICE_ATTR(temp_deactivated, S_IRUGO, tpm_show_temp_deactivated, NULL); > +static DEVICE_ATTR(caps, S_IRUGO, tpm_show_caps_1_2, NULL); > +static DEVICE_ATTR(cancel, S_IWUSR | S_IWGRP, NULL, tpm_store_cancel); > + > +static struct attribute *stm_tpm_attrs[] = { > + &dev_attr_pubek.attr, > + &dev_attr_pcrs.attr, > + &dev_attr_enabled.attr, > + &dev_attr_active.attr, > + &dev_attr_owned.attr, > + &dev_attr_temp_deactivated.attr, > + &dev_attr_caps.attr, > + &dev_attr_cancel.attr, NULL, > +}; > + > +static struct attribute_group stm_tpm_attr_grp = { > + .attrs = stm_tpm_attrs > +}; > + > +static struct tpm_vendor_specific st_i2c_tpm = { > + .send = tpm_stm_i2c_send, > + .recv = tpm_stm_i2c_recv, > + .cancel = tpm_stm_i2c_cancel, > + .status = tpm_stm_i2c_status, > + .req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID, > + .req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID, > + .req_canceled = TPM_STS_COMMAND_READY, > + .attr_group = &stm_tpm_attr_grp, > + .miscdev = {.fops = &tpm_st33_i2c_fops,}, > +}; > + > +static int interrupts ; > +module_param(interrupts, int, 0444); > +MODULE_PARM_DESC(interrupts, "Enable interrupts"); > + > +static int power_mgt = 1; > +module_param(power_mgt, int, 0444); > +MODULE_PARM_DESC(power_mgt, "Power Management"); > + > +/* > + * tpm_st33_i2c_probe initialize the TPM device > + * @param: client, the i2c_client drescription (TPM I2C description). > + * @param: id, the i2c_device_id struct. > + * @return: 0 in case of success. > + * -1 in other case. > + */ > +static int > +tpm_st33_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) > +{ > + u32 err; > + u8 intmask; > + struct tpm_chip *chip; > + struct st33zp24_platform_data *platform_data; > + > + err = 0; > + > + if (client == NULL) { > + dev_info(&client->dev, "client is NULL. exiting.\n"); > + err = -ENODEV; > + goto end; > + } > + > + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { > + dev_info(&client->dev, "client not i2c capable\n"); > + err = -ENODEV; > + goto end; > + } > + > + chip = tpm_register_hardware(&client->dev, &st_i2c_tpm); > + if (!chip) { > + dev_info(&client->dev, "fail chip\n"); > + err = -ENODEV; > + goto end; > + } > + > + platform_data = client->dev.platform_data; > + platform_data->tpm_i2c_buffer[0] = > + kmalloc(TPM_BUFSIZE * sizeof(u8), GFP_KERNEL); > + if (platform_data->tpm_i2c_buffer[0] == NULL) { > + err = -ENOMEM; > + goto _tpm_clean_answer; > + } > + platform_data->tpm_i2c_buffer[1] = > + kmalloc(TPM_BUFSIZE * sizeof(u8), GFP_KERNEL); > + if (platform_data->tpm_i2c_buffer[1] == NULL) { > + err = -ENOMEM; > + goto _tpm_clean_response; > + } > + > + chip->vendor.iobase = client; > + > + chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT); > + chip->vendor.timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT); > + chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT); > + chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT); > + > + chip->vendor.locality = LOCALITY0; > + > + if (power_mgt) { > + err = gpio_request(platform_data->io_lpcpd, "TPM IO_LPCPD"); > + if (err) > + goto _gpio_init1; > + gpio_set_value(platform_data->io_lpcpd, 1); > + } > + > + if (interrupts) { > + init_completion(&platform_data->irq_detection); > + if (request_locality(chip) != LOCALITY0) { > + err = -ENODEV; > + goto _tpm_clean_response; > + } > + err = gpio_request(platform_data->io_serirq, "TPM IO_SERIRQ"); > + if (err) > + goto _gpio_init2; > + > + clear_interruption(client); > + err = request_irq(gpio_to_irq(platform_data->io_serirq), > + &tpm_ioserirq_handler, > + IRQF_TRIGGER_HIGH, > + "TPM SERIRQ management", chip); > + if (err < 0) { > + dev_err(chip->dev , "TPM SERIRQ signals %d not available\n", > + gpio_to_irq(platform_data->io_serirq)); > + goto _irq_set; > + } > + > + err = I2C_READ_DATA(client, TPM_INT_ENABLE, &intmask, 1); > + if (err < 0) > + goto _irq_set; > + > + intmask |= TPM_INTF_CMD_READY_INT > + | TPM_INTF_FIFO_AVALAIBLE_INT > + | TPM_INTF_WAKE_UP_READY_INT > + | TPM_INTF_LOCALITY_CHANGE_INT > + | TPM_INTF_STS_VALID_INT > + | TPM_INTF_DATA_AVAIL_INT; > + > + err = I2C_WRITE_DATA(client, TPM_INT_ENABLE, &intmask, 1); > + if (err < 0) > + goto _irq_set; > + > + intmask = TPM_GLOBAL_INT_ENABLE; > + err = I2C_WRITE_DATA(client, (TPM_INT_ENABLE + 3), &intmask, 1); > + if (err < 0) > + goto _irq_set; > + > + err = I2C_READ_DATA(client, TPM_INT_STATUS, &intmask, 1); > + if (err < 0) > + goto _irq_set; > + > + chip->vendor.irq = interrupts; > + > + tpm_gen_interrupt(chip); > + } > + > + tpm_get_timeouts(chip); > + > + i2c_set_clientdata(client, chip); > + platform_data->bChipF = false; > + > + dev_info(chip->dev, "TPM I2C Initialized\n"); > + return 0; > +_irq_set: > + free_irq(gpio_to_irq(platform_data->io_serirq), (void *) chip); > +_gpio_init2: > + if (platform_data && interrupts) > + gpio_free(platform_data->io_serirq); > +_gpio_init1: > + if (platform_data && power_mgt) > + gpio_free(platform_data->io_lpcpd); > +_tpm_clean_response: > + tpm_remove_hardware(chip->dev); > + if (platform_data->tpm_i2c_buffer[1] != NULL) { > + kzfree(platform_data->tpm_i2c_buffer[1]); > + platform_data->tpm_i2c_buffer[1] = NULL; > + } > +_tpm_clean_answer: > + if (platform_data->tpm_i2c_buffer[0] != NULL) { > + kzfree(platform_data->tpm_i2c_buffer[0]); > + platform_data->tpm_i2c_buffer[0] = NULL; > + } > + > + platform_data->bChipF = true; > +end: > + pr_info("TPM I2C initialisation fail\n"); > + return err; > +} > + > +/* > + * tpm_st33_i2c_remove remove the TPM device > + * @param: client, the i2c_client drescription (TPM I2C description). > + clear_bit(0, &chip->is_open); > + * @return: 0 in case of success. > + */ > +static __devexit int tpm_st33_i2c_remove(struct i2c_client *client) > +{ > + struct tpm_chip *chip = (struct tpm_chip *)i2c_get_clientdata(client); > + struct st33zp24_platform_data *pin_infos = > + ((struct i2c_client *) chip->vendor.iobase)->dev.platform_data; > + > + if (pin_infos != NULL) { > + free_irq(pin_infos->io_serirq, chip); > + > + gpio_free(pin_infos->io_serirq); > + gpio_free(pin_infos->io_lpcpd); > + > + if (pin_infos->bChipF != true) > + tpm_remove_hardware(chip->dev); > + if (pin_infos->tpm_i2c_buffer[1] != NULL) { > + kzfree(pin_infos->tpm_i2c_buffer[1]); > + pin_infos->tpm_i2c_buffer[1] = NULL; > + } > + if (pin_infos->tpm_i2c_buffer[0] != NULL) { > + kzfree(pin_infos->tpm_i2c_buffer[0]); > + pin_infos->tpm_i2c_buffer[0] = NULL; > + } > + } > + > + return 0; > +} > + > +/* > + * tpm_st33_i2c_pm_suspend suspend the TPM device > + * Added: Work around when suspend and no tpm application is running, suspend > + * may fail because chip->data_buffer is not set (only set in tpm_open in Linux > + * TPM core) > + * @param: client, the i2c_client drescription (TPM I2C description). > + * @param: mesg, the power management message. > + * @return: 0 in case of success. > + */ > +static int tpm_st33_i2c_pm_suspend(struct i2c_client *client, pm_message_t mesg) > +{ > + struct tpm_chip *chip = > + (struct tpm_chip *)i2c_get_clientdata(client); > + struct st33zp24_platform_data *pin_infos = > + ((struct i2c_client *)chip->vendor.iobase)->dev.platform_data; > + int ret = 0; > + > + if (power_mgt) > + gpio_set_value(pin_infos->io_lpcpd, 0); > + else{ > + if (chip->data_buffer == NULL) > + chip->data_buffer = pin_infos->tpm_i2c_buffer[0]; > + ret = tpm_pm_suspend(&client->dev); > + } > + return ret; > +} /* tpm_st33_i2c_suspend() */ > + > +/* > + * tpm_st33_i2c_pm_resume resume the TPM device > + * @param: client, the i2c_client drescription (TPM I2C description). > + * @return: 0 in case of success. > + */ > +static int tpm_st33_i2c_pm_resume(struct i2c_client *client) > +{ > + struct tpm_chip *chip = > + (struct tpm_chip *)i2c_get_clientdata(client); > + struct st33zp24_platform_data *pin_infos = > + ((struct i2c_client *)chip->vendor.iobase)->dev.platform_data; > + > + int ret = 0; > + > + if (power_mgt) { > + gpio_set_value(pin_infos->io_lpcpd, 1); > + ret = wait_for_serirq_timeout(chip, > + (chip->vendor.status(chip) && > + TPM_STS_VALID) == TPM_STS_VALID, > + chip->vendor.timeout_b); > + } else{ > + if (chip->data_buffer == NULL) > + chip->data_buffer = pin_infos->tpm_i2c_buffer[0]; > + ret = tpm_pm_resume(&client->dev); > + if (!ret) > + tpm_do_selftest(chip); > + } > + return ret; > +} /* tpm_st33_i2c_pm_resume() */ > + > +static const struct i2c_device_id tpm_st33_i2c_id[] = { > + {TPM_ST33_I2C, 0}, > + {} > +}; > + > +MODULE_DEVICE_TABLE(i2c, tpm_st33_i2c_id); > + > +static struct i2c_driver tpm_st33_i2c_driver = { > + .driver = { > + .owner = THIS_MODULE, > + .name = TPM_ST33_I2C, > + }, > + .probe = tpm_st33_i2c_probe, > + .remove = tpm_st33_i2c_remove, > + .resume = tpm_st33_i2c_pm_resume, > + .suspend = tpm_st33_i2c_pm_suspend, > + .id_table = tpm_st33_i2c_id > +}; > + > +/* > + * tpm_st33_i2c_init initialize driver > + * @return: 0 if successful, else non zero value. > + */ > +static int __init tpm_st33_i2c_init(void) > +{ > + return i2c_add_driver(&tpm_st33_i2c_driver); > +} > + > +/* > + * tpm_st33_i2c_exit The kernel calls this function during unloading the > + * module or during shut down process > + */ > +static void __exit tpm_st33_i2c_exit(void) > +{ > + i2c_del_driver(&tpm_st33_i2c_driver); > +} > + > +module_init(tpm_st33_i2c_init); > +module_exit(tpm_st33_i2c_exit); > + > +MODULE_AUTHOR("Christophe Ricard (tpmsupport@st.com)"); > +MODULE_DESCRIPTION("STM TPM I2C ST33 Driver"); > +MODULE_VERSION("1.2.0"); > diff --git a/drivers/char/tpm/tpm_stm_st33_i2c.h b/drivers/char/tpm/tpm_stm_st33_i2c.h > new file mode 100644 > index 0000000..d390542 > --- /dev/null > +++ b/drivers/char/tpm/tpm_stm_st33_i2c.h > @@ -0,0 +1,81 @@ > +/* > + * STMicroelectronics TPM I2C Linux driver for TPM ST33ZP24 > + * Copyright (C) 2009, 2010 STMicroelectronics > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License along > + * with this program; if not, write to the Free Software Foundation, Inc., > + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. > + * > + * STMicroelectronics version 1.2.0, Copyright (C) 2010 > + * STMicroelectronics comes with ABSOLUTELY NO WARRANTY. > + * This is free software, and you are welcome to redistribute it > + * under certain conditions. > + * > + * @Author: Christophe RICARD tpmsupport@st.com > + * > + * @File: stm_st33_tpm_i2c.h > + * > + * @Date: 09/15/2010 > + */ > +#ifndef __STM_ST33_TPM_I2C_MAIN_H__ > +#define __STM_ST33_TPM_I2C_MAIN_H__ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include "tpm.h" > + > +#define MINOR_NUM_I2C 224 > + > +#define TPM_ACCESS (0x0) > +#define TPM_STS (0x18) > +#define TPM_HASH_END (0x20) > +#define TPM_DATA_FIFO (0x24) > +#define TPM_HASH_DATA (0x24) > +#define TPM_HASH_START (0x28) > +#define TPM_INTF_CAPABILITY (0x14) > +#define TPM_INT_STATUS (0x10) > +#define TPM_INT_ENABLE (0x08) > + > +#define TPM_DUMMY_BYTE 0xAA > +#define TPM_WRITE_DIRECTION 0x80 > +#define TPM_HEADER_SIZE 10 > +#define TPM_BUFSIZE 2048 > + > +#define LOCALITY0 0 > + > +struct st_tpm_hash { > + int size; > + u8 *data; > +}; > + > +#endif /* __STM_ST33_TPM_I2C_MAIN_H__ */ > diff --git a/include/linux/i2c/tpm_stm_st33_i2c.h b/include/linux/i2c/tpm_stm_st33_i2c.h > new file mode 100644 > index 0000000..e3ce42d > --- /dev/null > +++ b/include/linux/i2c/tpm_stm_st33_i2c.h > @@ -0,0 +1,47 @@ > +/* > +* STMicroelectronics TPM I2C Linux driver for TPM ST33ZP24 > +* Copyright (C) 2009, 2010 STMicroelectronics > +* Christophe RICARD tpmsupport@st.com > +* This program is free software; you can redistribute it and/or modify > +* it under the terms of the GNU General Public License as published by > +* the Free Software Foundation; either version 2 of the License, or > +* (at your option) any later version. > +* > +* This program is distributed in the hope that it will be useful, > +* but WITHOUT ANY WARRANTY; without even the implied warranty of > +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > +* GNU General Public License for more details. > +* > +* You should have received a copy of the GNU General Public License along > +* with this program; if not, write to the Free Software Foundation, Inc., > +* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. > +* > +* STMicroelectronics version 1.2.0, Copyright (C) 2010 > +* STMicroelectronics comes with ABSOLUTELY NO WARRANTY. > +* This is free software, and you are welcome to redistribute it > +* under certain conditions. > +* > +* @File: stm_st33_tpm_i2c.h > +* > +* @Date: 06/15/2008 > +*/ > +#ifndef __STM_ST33_TPM_I2C_H__ > +#define __STM_ST33_TPM_I2C_H__ > + > +#include > + > +#define TPM_ST33_I2C "st33zp24_i2c" > +#define TPM_I2C_ST33_ADDR_WR_LOC0 (0x26 >> 1) > + > + > +struct st33zp24_platform_data { > + int io_serirq; > + int io_lpcpd; > + struct i2c_client *client; > + bool bChipF; > + u8 *tpm_i2c_buffer[2]; /* 0 Request 1 Response */ > + struct completion irq_detection; > + struct mutex lock; > +}; > + > +#endif /* __STM_ST33_TPM_I2C_H__ */ > -- > 1.7.9.5 >