[ 00/37] 3.6.11-stable review

[ 00/37] 3.6.11-stable review

[Greg Kroah-Hartman]

Note: This is going to be the last 3.6.y kernel release, unless
something major comes up, everyone should be moving to the 3.7.y kernel
at this point in time.

This is the start of the stable review cycle for the 3.6.11 release.
There are 37 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sun Dec 16 22:16:49 UTC 2012.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.6.11-rc1.gz
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 3.6.11-rc1

Huang Ying <ying.huang@intel.com>
    PCI/PM: Fix deadlock when unbinding device if parent in D3cold

Eric Dumazet <edumazet@google.com>
    rcu: Fix batch-limit size problem

Alan Stern <stern@rowland.harvard.edu>
    USB: EHCI: bugfix: urb->hcpriv should not be NULL

Zheng Liu <gnehzuil.liu@gmail.com>
    perf test: fix a build error on builtin-test

Dan Williams <dcbw@redhat.com>
    cdc-acm: implement TIOCSSERIAL to avoid blocking close(2)

Steven Rostedt <srostedt@redhat.com>
    ring-buffer: Fix race between integrity check and readers

Steven Rostedt <srostedt@redhat.com>
    ring-buffer: Fix NULL pointer if rb_set_head_page() fails

Dan Carpenter <dan.carpenter@oracle.com>
    ftrace: Clear bits properly in reset_iter_read()

Sarah Sharp <sarah.a.sharp@linux.intel.com>
    xhci: Extend Fresco Logic MSI quirk.

Alan Stern <stern@rowland.harvard.edu>
    USB: OHCI: workaround for hardware bug: retired TDs not added to the Done Queue

Lan Tianyu <tianyu.lan@intel.com>
    ACPI / video: Add "Asus UL30VT" to ACPI video detect blacklist

Zhang Rui <rui.zhang@intel.com>
    ACPI / video: ignore BIOS initial backlight value for HP Folio 13-2000

Rafael J. Wysocki <rafael.j.wysocki@intel.com>
    ACPI / PNP: Do not crash due to stale pointer use during system resume

Lan Tianyu <tianyu.lan@intel.com>
    ACPI / PM: Add Sony Vaio VPCEB1S1E to nonvs blacklist.

Kamil Iskra <kamil@iskra.name>
    ACPI / battery: Correct battery capacity values on Thinkpads

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    USB: mark uas driver as BROKEN

Markus Becker <mab@comnets.uni-bremen.de>
    USB: cp210x: add Virtenio Preon32 device id

Peter Korsgaard <jacmet@sunsite.dk>
    usb: ftdi_sio: fixup BeagleBone A5+ quirk

Martin Teichmann <lkb.teichmann@gmail.com>
    USB: ftdi_sio: Add support for Newport AGILIS motor drivers

Bjørn Mork <bjorn@mork.no>
    USB: option: blacklist network interface on Huawei E173

li.rui27@zte.com.cn <li.rui27@zte.com.cn>
    USB: add new zte 3g-dongle's pid to option.c

Jan Beulich <JBeulich@suse.com>
    x86: hpet: Fix masking of MSI interrupts

Jiri Kosina <jkosina@suse.cz>
    floppy: destroy floppy workqueue before cleaning up the queue

Boris Ostrovsky <boris.ostrovsky@amd.com>
    x86,AMD: Power driver support for AMD's family 16h processors

Marek Szyprowski <m.szyprowski@samsung.com>
    mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls

Jani Nikula <jani.nikula@intel.com>
    drm/i915: do not default to 18 bpp for eDP if missing from VBT

Jani Nikula <jani.nikula@intel.com>
    drm/i915: do not ignore eDP bpc settings from vbt

Tejun Heo <tj@kernel.org>
    workqueue: convert BUG_ON()s in __queue_delayed_work() to WARN_ON_ONCE()s

Mauro Carvalho Chehab <mchehab@redhat.com>
    edac: Fix the dimm filling for csrows-based layouts

Mauro Carvalho Chehab <mchehab@redhat.com>
    i82975x_edac: Fix dimm label initialization

Florian Fainelli <florian@openwrt.org>
    Input: matrix-keymap - provide proper module license

Samuel Iglesias Gonsálvez <siglesias@igalia.com>
    Staging: ipack/bridges/tpci200: avoid kernel bug when uninstalling a device

Peter Ujfalusi <peter.ujfalusi@ti.com>
    ASoC: dmaengine: Correct Makefile when sound is built as module

Paul Walmsley <paul@pwsan.com>
    ARM: 7566/1: vfp: fix save and restore when running on pre-VFPv3 and CONFIG_VFPv3 set

Guennadi Liakhovetski <g.liakhovetski@gmx.de>
    mmc: sh-mmcif: avoid oops on spurious interrupts (second try)

Chris Ball <cjb@laptop.org>
    Revert misapplied "mmc: sh-mmcif: avoid oops on spurious interrupts"

Mel Gorman <mgorman@suse.de>
    tmpfs: fix shared mempolicy leak


-------------

Diffstat:

 Makefile                                    |  4 +-
 arch/arm/include/asm/hwcap.h                |  3 +-
 arch/arm/include/asm/vfpmacros.h            | 12 ++---
 arch/arm/vfp/vfpmodule.c                    |  9 ++--
 arch/powerpc/platforms/pseries/eeh_driver.c | 35 +++++++++----
 arch/x86/kernel/hpet.c                      |  4 +-
 drivers/acpi/battery.c                      | 77 +++++++++++++++++++++++++++++
 drivers/acpi/sleep.c                        |  8 +++
 drivers/acpi/video.c                        | 14 ++++++
 drivers/acpi/video_detect.c                 |  8 +++
 drivers/block/floppy.c                      |  5 +-
 drivers/edac/edac_mc.c                      | 14 ++++--
 drivers/edac/i82975x_edac.c                 | 11 ++---
 drivers/gpu/drm/i915/intel_bios.c           | 11 +----
 drivers/gpu/drm/i915/intel_display.c        | 11 +++++
 drivers/hwmon/fam15h_power.c                |  4 ++
 drivers/input/matrix-keymap.c               |  3 ++
 drivers/mmc/host/sh_mmcif.c                 |  8 +--
 drivers/pci/bus.c                           |  3 --
 drivers/pci/pcie/aer/aerdrv_core.c          | 20 ++++++--
 drivers/pnp/pnpacpi/core.c                  |  3 ++
 drivers/staging/ipack/bridges/tpci200.c     |  2 +-
 drivers/usb/class/cdc-acm.c                 | 38 ++++++++++++++
 drivers/usb/host/ehci-q.c                   | 12 ++---
 drivers/usb/host/ehci-sched.c               |  4 +-
 drivers/usb/host/ohci-q.c                   | 19 +++++++
 drivers/usb/host/xhci-pci.c                 |  7 ++-
 drivers/usb/serial/cp210x.c                 |  1 +
 drivers/usb/serial/ftdi_sio.c               |  3 +-
 drivers/usb/serial/ftdi_sio_ids.h           |  6 +++
 drivers/usb/serial/option.c                 | 25 ++++++++++
 drivers/usb/storage/Kconfig                 |  2 +-
 include/linux/mempolicy.h                   | 16 ------
 kernel/rcutree.c                            | 15 +++---
 kernel/trace/ftrace.c                       |  2 +-
 kernel/trace/ring_buffer.c                  | 16 ++++--
 kernel/workqueue.c                          |  4 +-
 mm/dmapool.c                                | 31 +++---------
 mm/mempolicy.c                              | 22 ---------
 mm/shmem.c                                  | 26 ++++++----
 sound/soc/Makefile                          |  5 +-
 tools/perf/builtin-test.c                   | 38 +++++---------
 42 files changed, 374 insertions(+), 187 deletions(-)

[ 01/37] tmpfs: fix shared mempolicy leak

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mel Gorman <mgorman@suse.de>

commit 18a2f371f5edf41810f6469cb9be39931ef9deb9 upstream.

This fixes a regression in 3.7-rc, which has since gone into stable.

Commit 00442ad04a5e ("mempolicy: fix a memory corruption by refcount
imbalance in alloc_pages_vma()") changed get_vma_policy() to raise the
refcount on a shmem shared mempolicy; whereas shmem_alloc_page() went
on expecting alloc_page_vma() to drop the refcount it had acquired.
This deserves a rework: but for now fix the leak in shmem_alloc_page().

Hugh: shmem_swapin() did not need a fix, but surely it's clearer to use
the same refcounting there as in shmem_alloc_page(), delete its onstack
mempolicy, and the strange mpol_cond_copy() and __mpol_cond_copy() -
those were invented to let swapin_readahead() make an unknown number of
calls to alloc_pages_vma() with one mempolicy; but since 00442ad04a5e,
alloc_pages_vma() has kept refcount in balance, so now no problem.

Reported-and-tested-by: Tommi Rantala <tt.rantala@gmail.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/mempolicy.h |   16 ----------------
 mm/mempolicy.c            |   22 ----------------------
 mm/shmem.c                |   26 ++++++++++++++++----------
 3 files changed, 16 insertions(+), 48 deletions(-)

--- a/include/linux/mempolicy.h
+++ b/include/linux/mempolicy.h
@@ -137,16 +137,6 @@ static inline void mpol_cond_put(struct
 		__mpol_put(pol);
 }
 
-extern struct mempolicy *__mpol_cond_copy(struct mempolicy *tompol,
-					  struct mempolicy *frompol);
-static inline struct mempolicy *mpol_cond_copy(struct mempolicy *tompol,
-						struct mempolicy *frompol)
-{
-	if (!frompol)
-		return frompol;
-	return __mpol_cond_copy(tompol, frompol);
-}
-
 extern struct mempolicy *__mpol_dup(struct mempolicy *pol);
 static inline struct mempolicy *mpol_dup(struct mempolicy *pol)
 {
@@ -270,12 +260,6 @@ static inline void mpol_cond_put(struct
 {
 }
 
-static inline struct mempolicy *mpol_cond_copy(struct mempolicy *to,
-						struct mempolicy *from)
-{
-	return from;
-}
-
 static inline void mpol_get(struct mempolicy *pol)
 {
 }
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -2035,28 +2035,6 @@ struct mempolicy *__mpol_dup(struct memp
 	return new;
 }
 
-/*
- * If *frompol needs [has] an extra ref, copy *frompol to *tompol ,
- * eliminate the * MPOL_F_* flags that require conditional ref and
- * [NOTE!!!] drop the extra ref.  Not safe to reference *frompol directly
- * after return.  Use the returned value.
- *
- * Allows use of a mempolicy for, e.g., multiple allocations with a single
- * policy lookup, even if the policy needs/has extra ref on lookup.
- * shmem_readahead needs this.
- */
-struct mempolicy *__mpol_cond_copy(struct mempolicy *tompol,
-						struct mempolicy *frompol)
-{
-	if (!mpol_needs_cond_ref(frompol))
-		return frompol;
-
-	*tompol = *frompol;
-	tompol->flags &= ~MPOL_F_SHARED;	/* copy doesn't need unref */
-	__mpol_put(frompol);
-	return tompol;
-}
-
 /* Slow path of a mempolicy comparison */
 bool __mpol_equal(struct mempolicy *a, struct mempolicy *b)
 {
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -921,25 +921,29 @@ static struct mempolicy *shmem_get_sbmpo
 static struct page *shmem_swapin(swp_entry_t swap, gfp_t gfp,
 			struct shmem_inode_info *info, pgoff_t index)
 {
-	struct mempolicy mpol, *spol;
 	struct vm_area_struct pvma;
-
-	spol = mpol_cond_copy(&mpol,
-			mpol_shared_policy_lookup(&info->policy, index));
+	struct page *page;
 
 	/* Create a pseudo vma that just contains the policy */
 	pvma.vm_start = 0;
 	/* Bias interleave by inode number to distribute better across nodes */
 	pvma.vm_pgoff = index + info->vfs_inode.i_ino;
 	pvma.vm_ops = NULL;
-	pvma.vm_policy = spol;
-	return swapin_readahead(swap, gfp, &pvma, 0);
+	pvma.vm_policy = mpol_shared_policy_lookup(&info->policy, index);
+
+	page = swapin_readahead(swap, gfp, &pvma, 0);
+
+	/* Drop reference taken by mpol_shared_policy_lookup() */
+	mpol_cond_put(pvma.vm_policy);
+
+	return page;
 }
 
 static struct page *shmem_alloc_page(gfp_t gfp,
 			struct shmem_inode_info *info, pgoff_t index)
 {
 	struct vm_area_struct pvma;
+	struct page *page;
 
 	/* Create a pseudo vma that just contains the policy */
 	pvma.vm_start = 0;
@@ -948,10 +952,12 @@ static struct page *shmem_alloc_page(gfp
 	pvma.vm_ops = NULL;
 	pvma.vm_policy = mpol_shared_policy_lookup(&info->policy, index);
 
-	/*
-	 * alloc_page_vma() will drop the shared policy reference
-	 */
-	return alloc_page_vma(gfp, &pvma, 0);
+	page = alloc_page_vma(gfp, &pvma, 0);
+
+	/* Drop reference taken by mpol_shared_policy_lookup() */
+	mpol_cond_put(pvma.vm_policy);
+
+	return page;
 }
 #else /* !CONFIG_NUMA */
 #ifdef CONFIG_TMPFS

[ 02/37] Revert misapplied "mmc: sh-mmcif: avoid oops on spurious interrupts"

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chris Ball <cjb@laptop.org>

commit 6984f3c31bb57cb7491dbec1be44b74bd00f4648 upstream.

This reverts commit 8464dd52d3198dd05, which was a misapplied debugging
version of the patch, not the final patch itself.

Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mmc/host/sh_mmcif.c |    4 ----
 1 file changed, 4 deletions(-)

--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -1229,10 +1229,6 @@ static irqreturn_t sh_mmcif_intr(int irq
 		host->sd_error = true;
 		dev_dbg(&host->pd->dev, "int err state = %08x\n", state);
 	}
-	if (host->state == STATE_IDLE) {
-		dev_info(&host->pd->dev, "Spurious IRQ status 0x%x", state);
-		return IRQ_HANDLED;
-	}
 	if (state & ~(INT_CMD12RBE | INT_CMD12CRE)) {
 		if (!host->dma_active)
 			return IRQ_WAKE_THREAD;

[ 03/37] mmc: sh-mmcif: avoid oops on spurious interrupts (second try)

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>

commit 91ab252ac5a5c3461dd6910797611e9172626aed upstream.

On some systems, e.g., kzm9g, MMCIF interfaces can produce spurious
interrupts without any active request. To prevent the Oops, that results
in such cases, don't dereference the mmc request pointer until we make
sure, that we are indeed processing such a request.

Reported-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Tested-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mmc/host/sh_mmcif.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -1104,7 +1104,6 @@ static irqreturn_t sh_mmcif_irqt(int irq
 {
 	struct sh_mmcif_host *host = dev_id;
 	struct mmc_request *mrq = host->mrq;
-	struct mmc_data *data = mrq->data;
 
 	cancel_delayed_work_sync(&host->timeout_work);
 
@@ -1152,13 +1151,14 @@ static irqreturn_t sh_mmcif_irqt(int irq
 	case MMCIF_WAIT_FOR_READ_END:
 	case MMCIF_WAIT_FOR_WRITE_END:
 		if (host->sd_error)
-			data->error = sh_mmcif_error_manage(host);
+			mrq->data->error = sh_mmcif_error_manage(host);
 		break;
 	default:
 		BUG();
 	}
 
 	if (host->wait_for != MMCIF_WAIT_FOR_STOP) {
+		struct mmc_data *data = mrq->data;
 		if (!mrq->cmd->error && data && !data->error)
 			data->bytes_xfered =
 				data->blocks * data->blksz;

[ 04/37] ARM: 7566/1: vfp: fix save and restore when running on pre-VFPv3 and CONFIG_VFPv3 set

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Walmsley <paul@pwsan.com>

commit 39141ddfb63a664f26d3f42f64ee386e879b492c upstream.

After commit 846a136881b8f73c1f74250bf6acfaa309cab1f2 ("ARM: vfp: fix
saving d16-d31 vfp registers on v6+ kernels"), the OMAP 2430SDP board
started crashing during boot with omap2plus_defconfig:

[    3.875122] mmcblk0: mmc0:e624 SD04G 3.69 GiB
[    3.915954]  mmcblk0: p1
[    4.086639] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM
[    4.093719] Modules linked in:
[    4.096954] CPU: 0    Not tainted  (3.6.0-02232-g759e00b #570)
[    4.103149] PC is at vfp_reload_hw+0x1c/0x44
[    4.107666] LR is at __und_usr_fault_32+0x0/0x8

It turns out that the context save/restore fix unmasked a latent bug
in commit 5aaf254409f8d58229107b59507a8235b715a960 ("ARM: 6203/1: Make
VFPv3 usable on ARMv6").  When CONFIG_VFPv3 is set, but the kernel is
booted on a pre-VFPv3 core, the code attempts to save and restore the
d16-d31 VFP registers.  These are only present on non-D16 VFPv3+, so
this results in an undefined instruction exception.  The code didn't
crash before commit 846a136 because the save and restore code was
only touching d0-d15, present on all VFP.

Fix by implementing a request from Russell King to add a new HWCAP
flag that affirmatively indicates the presence of the d16-d31
registers:

   http://marc.info/?l=linux-arm-kernel&m=135013547905283&w=2

and some feedback from Måns to clarify the name of the HWCAP flag.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Martin <dave.martin@linaro.org>
Cc: Måns Rullgård <mans.rullgard@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/include/asm/hwcap.h     |    3 ++-
 arch/arm/include/asm/vfpmacros.h |   12 ++++++------
 arch/arm/vfp/vfpmodule.c         |    9 ++++++---
 3 files changed, 14 insertions(+), 10 deletions(-)

--- a/arch/arm/include/asm/hwcap.h
+++ b/arch/arm/include/asm/hwcap.h
@@ -18,11 +18,12 @@
 #define HWCAP_THUMBEE	(1 << 11)
 #define HWCAP_NEON	(1 << 12)
 #define HWCAP_VFPv3	(1 << 13)
-#define HWCAP_VFPv3D16	(1 << 14)
+#define HWCAP_VFPv3D16	(1 << 14)	/* also set for VFPv4-D16 */
 #define HWCAP_TLS	(1 << 15)
 #define HWCAP_VFPv4	(1 << 16)
 #define HWCAP_IDIVA	(1 << 17)
 #define HWCAP_IDIVT	(1 << 18)
+#define HWCAP_VFPD32	(1 << 19)	/* set if VFP has 32 regs (not 16) */
 #define HWCAP_IDIV	(HWCAP_IDIVA | HWCAP_IDIVT)
 
 #if defined(__KERNEL__)
--- a/arch/arm/include/asm/vfpmacros.h
+++ b/arch/arm/include/asm/vfpmacros.h
@@ -27,9 +27,9 @@
 #if __LINUX_ARM_ARCH__ <= 6
 	ldr	\tmp, =elf_hwcap		    @ may not have MVFR regs
 	ldr	\tmp, [\tmp, #0]
-	tst	\tmp, #HWCAP_VFPv3D16
-	ldceql	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
-	addne	\base, \base, #32*4		    @ step over unused register space
+	tst	\tmp, #HWCAP_VFPD32
+	ldcnel	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
+	addeq	\base, \base, #32*4		    @ step over unused register space
 #else
 	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
 	and	\tmp, \tmp, #MVFR0_A_SIMD_MASK	    @ A_SIMD field
@@ -51,9 +51,9 @@
 #if __LINUX_ARM_ARCH__ <= 6
 	ldr	\tmp, =elf_hwcap		    @ may not have MVFR regs
 	ldr	\tmp, [\tmp, #0]
-	tst	\tmp, #HWCAP_VFPv3D16
-	stceql	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
-	addne	\base, \base, #32*4		    @ step over unused register space
+	tst	\tmp, #HWCAP_VFPD32
+	stcnel	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
+	addeq	\base, \base, #32*4		    @ step over unused register space
 #else
 	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
 	and	\tmp, \tmp, #MVFR0_A_SIMD_MASK	    @ A_SIMD field
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -701,11 +701,14 @@ static int __init vfp_init(void)
 			elf_hwcap |= HWCAP_VFPv3;
 
 			/*
-			 * Check for VFPv3 D16. CPUs in this configuration
-			 * only have 16 x 64bit registers.
+			 * Check for VFPv3 D16 and VFPv4 D16.  CPUs in
+			 * this configuration only have 16 x 64bit
+			 * registers.
 			 */
 			if (((fmrx(MVFR0) & MVFR0_A_SIMD_MASK)) == 1)
-				elf_hwcap |= HWCAP_VFPv3D16;
+				elf_hwcap |= HWCAP_VFPv3D16; /* also v4-D16 */
+			else
+				elf_hwcap |= HWCAP_VFPD32;
 		}
 #endif
 		/*

[ 05/37] ASoC: dmaengine: Correct Makefile when sound is built as module

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Ujfalusi <peter.ujfalusi@ti.com>

commit 961a7aeafab477f63d9eef26afde9cbb8badcd0f upstream.

soc-dmaengine-pcm library need to be part of the snd-soc-core in order to
be able to compile ASoC as modules when dmaengine is enabled on the platform.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/Makefile |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/sound/soc/Makefile
+++ b/sound/soc/Makefile
@@ -1,8 +1,9 @@
 snd-soc-core-objs := soc-core.o soc-dapm.o soc-jack.o soc-cache.o soc-utils.o
 snd-soc-core-objs += soc-pcm.o soc-io.o
 
-snd-soc-dmaengine-pcm-objs := soc-dmaengine-pcm.o
-obj-$(CONFIG_SND_SOC_DMAENGINE_PCM) += snd-soc-dmaengine-pcm.o
+ifneq ($(CONFIG_SND_SOC_DMAENGINE_PCM),)
+snd-soc-core-objs += soc-dmaengine-pcm.o
+endif
 
 obj-$(CONFIG_SND_SOC)	+= snd-soc-core.o
 obj-$(CONFIG_SND_SOC)	+= codecs/

[ 06/37] Staging: ipack/bridges/tpci200: avoid kernel bug when uninstalling a device

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Samuel Iglesias Gonsálvez <siglesias@igalia.com>

commit 9e58d05a1b24d2c0471c3b4df8f473a7543d7647 upstream.

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/ipack/bridges/tpci200.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/ipack/bridges/tpci200.c
+++ b/drivers/staging/ipack/bridges/tpci200.c
@@ -604,8 +604,8 @@ static int tpci200_slot_unregister(struc
 	if (mutex_lock_interruptible(&tpci200->mutex))
 		return -ERESTARTSYS;
 
-	ipack_device_unregister(dev);
 	tpci200->slots[dev->slot].dev = NULL;
+	ipack_device_unregister(dev);
 	mutex_unlock(&tpci200->mutex);
 
 	return 0;

[ 07/37] Input: matrix-keymap - provide proper module license

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Florian Fainelli <florian@openwrt.org>

commit 55220bb3e5f917dd5fee1153c612f9a83599f639 upstream.

The matrix-keymap module is currently lacking a proper module license,
add one so we don't have this module tainting the entire kernel.  This
issue has been present since commit 1932811f426f ("Input: matrix-keymap
- uninline and prepare for device tree support")

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/input/matrix-keymap.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/input/matrix-keymap.c
+++ b/drivers/input/matrix-keymap.c
@@ -23,6 +23,7 @@
 #include <linux/input.h>
 #include <linux/of.h>
 #include <linux/export.h>
+#include <linux/module.h>
 #include <linux/input/matrix_keypad.h>
 
 static bool matrix_keypad_map_key(struct input_dev *input_dev,
@@ -161,3 +162,5 @@ int matrix_keypad_build_keymap(const str
 	return 0;
 }
 EXPORT_SYMBOL(matrix_keypad_build_keymap);
+
+MODULE_LICENSE("GPL");

[ 08/37] i82975x_edac: Fix dimm label initialization

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mauro Carvalho Chehab <mchehab@redhat.com>

commit 479696840239e0cc43efb3c917bdcad2174d2215 upstream.

The driver has only 4 hardcoded labels, but allows much more memory.
Fix it by removing the hardcoded logic, using snprintf() instead.

[   19.833972] general protection fault: 0000 [#1] SMP
[   19.837733] Modules linked in: i82975x_edac(+) edac_core firewire_ohci firewire_core crc_itu_t nouveau mxm_wmi wmi video i2c_algo_bit drm_kms_helper ttm drm i2c_core
[   19.837733] CPU 0
[   19.837733] Pid: 390, comm: udevd Not tainted 3.6.1-1.fc17.x86_64.debug #1 Dell Inc.                 Precision WorkStation 390    /0MY510
[   19.837733] RIP: 0010:[<ffffffff813463a8>]  [<ffffffff813463a8>] strncpy+0x18/0x30
[   19.837733] RSP: 0018:ffff880078535b68  EFLAGS: 00010202
[   19.837733] RAX: ffff880069fa9708 RBX: ffff880078588000 RCX: ffff880069fa9708
[   19.837733] RDX: 000000000000001f RSI: 5f706f5f63616465 RDI: ffff880069fa9708
[   19.837733] RBP: ffff880078535b68 R08: ffff880069fa9727 R09: 000000000000fffe
[   19.837733] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000003
[   19.837733] R13: 0000000000000000 R14: ffff880069fa9290 R15: ffff880079624a80
[   19.837733] FS:  00007f3de01ee840(0000) GS:ffff88007c400000(0000) knlGS:0000000000000000
[   19.837733] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   19.837733] CR2: 00007f3de00b9000 CR3: 0000000078dbc000 CR4: 00000000000007f0
[   19.837733] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   19.837733] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[   19.837733] Process udevd (pid: 390, threadinfo ffff880078534000, task ffff880079642450)
[   19.837733] Stack:
[   19.837733]  ffff880078535c18 ffffffffa017c6b8 00040000816d627f ffff880079624a88
[   19.837733]  ffffc90004cd6000 ffff880079624520 ffff88007ac21148 0000000000000000
[   19.837733]  0000000000000000 0004000000000000 feda000078535bc8 ffffffff810d696d
[   19.837733] Call Trace:
[   19.837733]  [<ffffffffa017c6b8>] i82975x_init_one+0x2e6/0x3e6 [i82975x_edac]
...

Fix bug reported at:
	https://bugzilla.redhat.com/show_bug.cgi?id=848149
And, very likely:
	https://bbs.archlinux.org/viewtopic.php?id=148033
	https://bugzilla.kernel.org/show_bug.cgi?id=47171

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: CAI Qian <caiqian@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/edac/i82975x_edac.c |   11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

--- a/drivers/edac/i82975x_edac.c
+++ b/drivers/edac/i82975x_edac.c
@@ -370,10 +370,6 @@ static enum dev_type i82975x_dram_type(v
 static void i82975x_init_csrows(struct mem_ctl_info *mci,
 		struct pci_dev *pdev, void __iomem *mch_window)
 {
-	static const char *labels[4] = {
-							"DIMM A1", "DIMM A2",
-							"DIMM B1", "DIMM B2"
-						};
 	struct csrow_info *csrow;
 	unsigned long last_cumul_size;
 	u8 value;
@@ -423,9 +419,10 @@ static void i82975x_init_csrows(struct m
 			dimm = mci->csrows[index]->channels[chan]->dimm;
 
 			dimm->nr_pages = nr_pages / csrow->nr_channels;
-			strncpy(csrow->channels[chan]->dimm->label,
-					labels[(index >> 1) + (chan * 2)],
-					EDAC_MC_LABEL_LEN);
+
+			snprintf(csrow->channels[chan]->dimm->label, EDAC_MC_LABEL_LEN, "DIMM %c%d",
+				 (chan == 0) ? 'A' : 'B',
+				 index);
 			dimm->grain = 1 << 7;	/* 128Byte cache-line resolution */
 			dimm->dtype = i82975x_dram_type(mch_window, index);
 			dimm->mtype = MEM_DDR2; /* I82975x supports only DDR2 */

[ 09/37] edac: Fix the dimm filling for csrows-based layouts

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mauro Carvalho Chehab <mchehab@redhat.com>

commit 24bef66e74d647aebd34e0bef7693512b7912029 upstream.

The driver is currently filling data in a wrong way, on drivers
for csrows-based memory controller, when the first layer is a
csrow.

This is not easily to notice, as, in general, memories are
filed in dual, interleaved, symetric mode, as very few memory
controllers support asymetric modes.

While digging into a bug for i82795_edac driver, the asymetric
mode there is now working, allowing us to fill the machine with
4x1GB ranks at channel 0, and 2x512GB at channel 1:

Channel 0 ranks:
EDAC DEBUG: i82975x_init_csrows: DIMM A0: from page 0x00000000 to 0x0003ffff (size: 0x00040000 pages)
EDAC DEBUG: i82975x_init_csrows: DIMM A1: from page 0x00040000 to 0x0007ffff (size: 0x00040000 pages)
EDAC DEBUG: i82975x_init_csrows: DIMM A2: from page 0x00080000 to 0x000bffff (size: 0x00040000 pages)
EDAC DEBUG: i82975x_init_csrows: DIMM A3: from page 0x000c0000 to 0x000fffff (size: 0x00040000 pages)

Channel 1 ranks:
EDAC DEBUG: i82975x_init_csrows: DIMM B0: from page 0x00100000 to 0x0011ffff (size: 0x00020000 pages)
EDAC DEBUG: i82975x_init_csrows: DIMM B1: from page 0x00120000 to 0x0013ffff (size: 0x00020000 pages)

Instead of properly showing the memories as such, before this patch, it
shows the memory layout as:

          +-----------------------------------+
          |                mc0                |
          |  csrow0   |  csrow1   |  csrow2   |
----------+-----------------------------------+
channel1: |  1024 MB  |  1024 MB  |   512 MB  |
channel0: |  1024 MB  |  1024 MB  |   512 MB  |
----------+-----------------------------------+

as if both channels were symetric, grouping the DIMMs on a wrong
layout.

After this patch, the memory is correctly represented.
So, for csrows at layers[0], it shows:

          +-----------------------------------------------+
          |                      mc0                      |
          |  csrow0   |  csrow1   |  csrow2   |  csrow3   |
----------+-----------------------------------------------+
channel1: |   512 MB  |   512 MB  |     0 MB  |     0 MB  |
channel0: |  1024 MB  |  1024 MB  |  1024 MB  |  1024 MB  |
----------+-----------------------------------------------+

For csrows at layers[1], it shows:

        +-----------------------+
        |          mc0          |
        | channel0  | channel1  |
--------+-----------------------+
csrow3: |  1024 MB  |     0 MB  |
csrow2: |  1024 MB  |     0 MB  |
--------+-----------------------+
csrow1: |  1024 MB  |   512 MB  |
csrow0: |  1024 MB  |   512 MB  |
--------+-----------------------+

So, no matter of what comes first, the information between
channel and csrow will be properly represented.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: CAI Qian <caiqian@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/edac/edac_mc.c |   14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

--- a/drivers/edac/edac_mc.c
+++ b/drivers/edac/edac_mc.c
@@ -416,10 +416,18 @@ struct mem_ctl_info *edac_mc_alloc(unsig
 		dimm->cschannel = chn;
 
 		/* Increment csrow location */
-		row++;
-		if (row == tot_csrows) {
-			row = 0;
+		if (layers[0].is_virt_csrow) {
 			chn++;
+			if (chn == tot_channels) {
+				chn = 0;
+				row++;
+			}
+		} else {
+			row++;
+			if (row == tot_csrows) {
+				row = 0;
+				chn++;
+			}
 		}
 
 		/* Increment dimm location */

[ 10/37] workqueue: convert BUG_ON()s in __queue_delayed_work() to WARN_ON_ONCE()s

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tejun Heo <tj@kernel.org>

commit fc4b514f2727f74a4587c31db87e0e93465518c3 upstream.

8852aac25e ("workqueue: mod_delayed_work_on() shouldn't queue timer on
0 delay") unexpectedly uncovered a very nasty abuse of delayed_work in
megaraid - it allocated work_struct, casted it to delayed_work and
then pass that into queue_delayed_work().

Previously, this was okay because 0 @delay short-circuited to
queue_work() before doing anything with delayed_work.  8852aac25e
moved 0 @delay test into __queue_delayed_work() after sanity check on
delayed_work making megaraid trigger BUG_ON().

Although megaraid is already fixed by c1d390d8e6 ("megaraid: fix
BUG_ON() from incorrect use of delayed work"), this patch converts
BUG_ON()s in __queue_delayed_work() to WARN_ON_ONCE()s so that such
abusers, if there are more, trigger warning but don't crash the
machine.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Xiaotian Feng <xtfeng@gmail.com>
Signed-off-by: Shuah Khan <shuah.khan@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/workqueue.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -1143,8 +1143,8 @@ int queue_delayed_work_on(int cpu, struc
 	if (!test_and_set_bit(WORK_STRUCT_PENDING_BIT, work_data_bits(work))) {
 		unsigned int lcpu;
 
-		BUG_ON(timer_pending(timer));
-		BUG_ON(!list_empty(&work->entry));
+		WARN_ON_ONCE(timer_pending(timer));
+		WARN_ON_ONCE(!list_empty(&work->entry));
 
 		timer_stats_timer_set_start_info(&dwork->timer);
 

[ 11/37] drm/i915: do not ignore eDP bpc settings from vbt

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jani Nikula <jani.nikula@intel.com>

commit 2f4f649a69a9eb51f6e98130e19dd90a260a4145 upstream.

There are laptops out there that need the eDP bpc from VBT. This is
effectively a revert of

commit 4344b813f105a19f793f1fd93ad775b784648b95
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Fri Aug 10 11:10:20 2012 +0200

    drm/i915: ignore eDP bpc settings from vbt

but putting the VBT check after the EDID check to see them both in dmesg if
this clamps more than the EDID. We have enough history with bpc clamping to
warrant the extra debug info.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47641
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56401
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/intel_display.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3791,6 +3791,17 @@ static bool intel_choose_pipe_bpp_dither
 			}
 		}
 
+		if (intel_encoder->type == INTEL_OUTPUT_EDP) {
+			/* Use VBT settings if we have an eDP panel */
+			unsigned int edp_bpc = dev_priv->edp.bpp / 3;
+
+			if (edp_bpc < display_bpc) {
+				DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc);
+				display_bpc = edp_bpc;
+			}
+			continue;
+		}
+
 		/*
 		 * HDMI is either 12 or 8, so if the display lets 10bpc sneak
 		 * through, clamp it down.  (Note: >12bpc will be caught below.)

[ 12/37] drm/i915: do not default to 18 bpp for eDP if missing from VBT

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jani Nikula <jani.nikula@intel.com>

commit 9a30a61f3516871c5c638fd7c025fbaa11ddf7fe upstream.

commit 500a8cc466a24e2fbc4c86ef9c6467ae2ffdeb0c
Author: Zhenyu Wang <zhenyuw@linux.intel.com>
Date:   Wed Jan 13 11:19:52 2010 +0800

    drm/i915: parse eDP panel color depth from VBT block

originally introduced parsing bpp for eDP from VBT, with a default of 18
bpp if the eDP BIOS data block is not present. Turns out that default seems
to break the Macbook Pro with retina display, as noted in

commit 4344b813f105a19f793f1fd93ad775b784648b95
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Fri Aug 10 11:10:20 2012 +0200

    drm/i915: ignore eDP bpc settings from vbt

Since we can't ignore bpc settings from VBT completely after all, get rid
of the default. Do not clamp eDP to 18 bpp by default if the eDP BDB is
missing from VBT.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Henrik Rydberg <rydberg@euromail.se>
[danvet: paste in the updated commit message from irc.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/intel_bios.c    |   11 ++---------
 drivers/gpu/drm/i915/intel_display.c |    2 +-
 2 files changed, 3 insertions(+), 10 deletions(-)

--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -500,12 +500,8 @@ parse_edp(struct drm_i915_private *dev_p
 
 	edp = find_section(bdb, BDB_EDP);
 	if (!edp) {
-		if (SUPPORTS_EDP(dev_priv->dev) && dev_priv->edp.support) {
-			DRM_DEBUG_KMS("No eDP BDB found but eDP panel "
-				      "supported, assume %dbpp panel color "
-				      "depth.\n",
-				      dev_priv->edp.bpp);
-		}
+		if (SUPPORTS_EDP(dev_priv->dev) && dev_priv->edp.support)
+			DRM_DEBUG_KMS("No eDP BDB found but eDP panel supported.\n");
 		return;
 	}
 
@@ -658,9 +654,6 @@ init_vbt_defaults(struct drm_i915_privat
 	dev_priv->lvds_use_ssc = 1;
 	dev_priv->lvds_ssc_freq = intel_bios_ssc_frequency(dev, 1);
 	DRM_DEBUG_KMS("Set default to SSC at %dMHz\n", dev_priv->lvds_ssc_freq);
-
-	/* eDP data */
-	dev_priv->edp.bpp = 18;
 }
 
 static int __init intel_no_opregion_vbt_callback(const struct dmi_system_id *id)
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3795,7 +3795,7 @@ static bool intel_choose_pipe_bpp_dither
 			/* Use VBT settings if we have an eDP panel */
 			unsigned int edp_bpc = dev_priv->edp.bpp / 3;
 
-			if (edp_bpc < display_bpc) {
+			if (edp_bpc && edp_bpc < display_bpc) {
 				DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc);
 				display_bpc = edp_bpc;
 			}

[ 13/37] mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marek Szyprowski <m.szyprowski@samsung.com>

commit 387870f2d6d679746020fa8e25ef786ff338dc98 upstream.

dmapool always calls dma_alloc_coherent() with GFP_ATOMIC flag,
regardless the flags provided by the caller. This causes excessive
pruning of emergency memory pools without any good reason. Additionaly,
on ARM architecture any driver which is using dmapools will sooner or
later  trigger the following error:
"ERROR: 256 KiB atomic DMA coherent pool is too small!
Please increase it with coherent_pool= kernel parameter!".
Increasing the coherent pool size usually doesn't help much and only
delays such error, because all GFP_ATOMIC DMA allocations are always
served from the special, very limited memory pool.

This patch changes the dmapool code to correctly use gfp flags provided
by the dmapool caller.

Reported-by: Soeren Moch <smoch@web.de>
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Soeren Moch <smoch@web.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/dmapool.c |   31 +++++++------------------------
 1 file changed, 7 insertions(+), 24 deletions(-)

--- a/mm/dmapool.c
+++ b/mm/dmapool.c
@@ -50,7 +50,6 @@ struct dma_pool {		/* the pool */
 	size_t allocation;
 	size_t boundary;
 	char name[32];
-	wait_queue_head_t waitq;
 	struct list_head pools;
 };
 
@@ -62,8 +61,6 @@ struct dma_page {		/* cacheable header f
 	unsigned int offset;
 };
 
-#define	POOL_TIMEOUT_JIFFIES	((100 /* msec */ * HZ) / 1000)
-
 static DEFINE_MUTEX(pools_lock);
 
 static ssize_t
@@ -172,7 +169,6 @@ struct dma_pool *dma_pool_create(const c
 	retval->size = size;
 	retval->boundary = boundary;
 	retval->allocation = allocation;
-	init_waitqueue_head(&retval->waitq);
 
 	if (dev) {
 		int ret;
@@ -227,7 +223,6 @@ static struct dma_page *pool_alloc_page(
 		memset(page->vaddr, POOL_POISON_FREED, pool->allocation);
 #endif
 		pool_initialise_page(pool, page);
-		list_add(&page->page_list, &pool->page_list);
 		page->in_use = 0;
 		page->offset = 0;
 	} else {
@@ -315,30 +310,21 @@ void *dma_pool_alloc(struct dma_pool *po
 	might_sleep_if(mem_flags & __GFP_WAIT);
 
 	spin_lock_irqsave(&pool->lock, flags);
- restart:
 	list_for_each_entry(page, &pool->page_list, page_list) {
 		if (page->offset < pool->allocation)
 			goto ready;
 	}
-	page = pool_alloc_page(pool, GFP_ATOMIC);
-	if (!page) {
-		if (mem_flags & __GFP_WAIT) {
-			DECLARE_WAITQUEUE(wait, current);
 
-			__set_current_state(TASK_UNINTERRUPTIBLE);
-			__add_wait_queue(&pool->waitq, &wait);
-			spin_unlock_irqrestore(&pool->lock, flags);
+	/* pool_alloc_page() might sleep, so temporarily drop &pool->lock */
+	spin_unlock_irqrestore(&pool->lock, flags);
 
-			schedule_timeout(POOL_TIMEOUT_JIFFIES);
+	page = pool_alloc_page(pool, mem_flags);
+	if (!page)
+		return NULL;
 
-			spin_lock_irqsave(&pool->lock, flags);
-			__remove_wait_queue(&pool->waitq, &wait);
-			goto restart;
-		}
-		retval = NULL;
-		goto done;
-	}
+	spin_lock_irqsave(&pool->lock, flags);
 
+	list_add(&page->page_list, &pool->page_list);
  ready:
 	page->in_use++;
 	offset = page->offset;
@@ -348,7 +334,6 @@ void *dma_pool_alloc(struct dma_pool *po
 #ifdef	DMAPOOL_DEBUG
 	memset(retval, POOL_POISON_ALLOCATED, pool->size);
 #endif
- done:
 	spin_unlock_irqrestore(&pool->lock, flags);
 	return retval;
 }
@@ -435,8 +420,6 @@ void dma_pool_free(struct dma_pool *pool
 	page->in_use--;
 	*(int *)vaddr = page->offset;
 	page->offset = offset;
-	if (waitqueue_active(&pool->waitq))
-		wake_up_locked(&pool->waitq);
 	/*
 	 * Resist a temptation to do
 	 *    if (!is_page_busy(page)) pool_free_page(pool, page);

[ 14/37] x86,AMD: Power driver support for AMDs family 16h processors

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Boris Ostrovsky <boris.ostrovsky@amd.com>

commit 22e32f4f57778ebc6e17812fa3008361c05d64f9 upstream.

Add family 16h PCI ID to AMD's power driver to allow it report
power consumption on these processors.

Signed-off-by: Boris Ostrovsky <boris.ostrovsky@amd.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hwmon/fam15h_power.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/hwmon/fam15h_power.c
+++ b/drivers/hwmon/fam15h_power.c
@@ -31,6 +31,9 @@ MODULE_DESCRIPTION("AMD Family 15h CPU p
 MODULE_AUTHOR("Andreas Herrmann <andreas.herrmann3@amd.com>");
 MODULE_LICENSE("GPL");
 
+/* Family 16h Northbridge's function 4 PCI ID */
+#define PCI_DEVICE_ID_AMD_16H_NB_F4	0x1534
+
 /* D18F3 */
 #define REG_NORTHBRIDGE_CAP		0xe8
 
@@ -257,6 +260,7 @@ static void __devexit fam15h_power_remov
 
 static DEFINE_PCI_DEVICE_TABLE(fam15h_power_id_table) = {
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) },
+	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_NB_F4) },
 	{}
 };
 MODULE_DEVICE_TABLE(pci, fam15h_power_id_table);

[ 15/37] floppy: destroy floppy workqueue before cleaning up the queue

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jiri Kosina <jkosina@suse.cz>

commit eac7cc52c6b410e542af431b2ee93f3d7dbfb6af upstream.

We need to first destroy the floppy_wq workqueue before cleaning up
the queue. Otherwise we might race with still pending work with the
workqueue, but all the block queue already gone. This might lead to
various oopses, such as

 CPU 0
 Pid: 6, comm: kworker/u:0 Not tainted 3.7.0-rc4 #1 Bochs Bochs
 RIP: 0010:[<ffffffff8134eef5>]  [<ffffffff8134eef5>] blk_peek_request+0xd5/0x1c0
 RSP: 0000:ffff88000dc7dd88  EFLAGS: 00010092
 RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000000
 RDX: ffff88000f602688 RSI: ffffffff81fd95d8 RDI: 6b6b6b6b6b6b6b6b
 RBP: ffff88000dc7dd98 R08: ffffffff81fd95c8 R09: 0000000000000000
 R10: ffffffff81fd9480 R11: 0000000000000001 R12: 6b6b6b6b6b6b6b6b
 R13: ffff88000dc7dfd8 R14: ffff88000dc7dfd8 R15: 0000000000000000
 FS:  0000000000000000(0000) GS:ffffffff81e21000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: 0000000000000000 CR3: 0000000001e11000 CR4: 00000000000006f0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Process kworker/u:0 (pid: 6, threadinfo ffff88000dc7c000, task ffff88000dc5ecc0)
 Stack:
  0000000000000000 0000000000000000 ffff88000dc7ddb8 ffffffff8134efee
  ffff88000dc7ddb8 0000000000000000 ffff88000dc7dde8 ffffffff814aef3c
  ffffffff81e75d80 ffff88000dc0c640 ffff88000fbfb000 ffffffff814aed90
 Call Trace:
  [<ffffffff8134efee>] blk_fetch_request+0xe/0x30
  [<ffffffff814aef3c>] redo_fd_request+0x1ac/0x400
  [<ffffffff814aed90>] ? start_motor+0x130/0x130
  [<ffffffff8106b526>] process_one_work+0x136/0x450
  [<ffffffff8106af65>] ? manage_workers+0x205/0x2e0
  [<ffffffff8106bb6d>] worker_thread+0x14d/0x420
  [<ffffffff8106ba20>] ? rescuer_thread+0x1a0/0x1a0
  [<ffffffff8107075a>] kthread+0xba/0xc0
  [<ffffffff810706a0>] ? __kthread_parkme+0x80/0x80
  [<ffffffff818b553a>] ret_from_fork+0x7a/0xb0
  [<ffffffff810706a0>] ? __kthread_parkme+0x80/0x80
 Code: 0f 84 c0 00 00 00 83 f8 01 0f 85 e2 00 00 00 81 4b 40 00 00 80 00 48 89 df e8 58 f8 ff ff be fb ff ff ff
 fe ff ff <49> 8b 1c 24 49 39 dc 0f 85 2e ff ff ff 41 0f b6 84 24 28 04 00
 RIP  [<ffffffff8134eef5>] blk_peek_request+0xd5/0x1c0
  RSP <ffff88000dc7dd88>

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/block/floppy.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -4329,6 +4329,7 @@ out_unreg_region:
 out_unreg_blkdev:
 	unregister_blkdev(FLOPPY_MAJOR, "fd");
 out_put_disk:
+	destroy_workqueue(floppy_wq);
 	while (dr--) {
 		del_timer_sync(&motor_off_timer[dr]);
 		if (disks[dr]->queue) {
@@ -4341,7 +4342,6 @@ out_put_disk:
 		}
 		put_disk(disks[dr]);
 	}
-	destroy_workqueue(floppy_wq);
 	return err;
 }
 
@@ -4556,6 +4556,8 @@ static void __exit floppy_module_exit(vo
 	unregister_blkdev(FLOPPY_MAJOR, "fd");
 	platform_driver_unregister(&floppy_driver);
 
+	destroy_workqueue(floppy_wq);
+
 	for (drive = 0; drive < N_DRIVE; drive++) {
 		del_timer_sync(&motor_off_timer[drive]);
 
@@ -4580,7 +4582,6 @@ static void __exit floppy_module_exit(vo
 
 	cancel_delayed_work_sync(&fd_timeout);
 	cancel_delayed_work_sync(&fd_timer);
-	destroy_workqueue(floppy_wq);
 
 	if (atomic_read(&usage_count))
 		floppy_release_irq_and_dma();

[ 16/37] x86: hpet: Fix masking of MSI interrupts

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Beulich <JBeulich@suse.com>

commit 6acf5a8c931da9d26c8dd77d784daaf07fa2bff0 upstream.

HPET_TN_FSB is not a proper mask bit; it merely toggles between MSI and
legacy interrupt delivery. The proper mask bit is HPET_TN_ENABLE, so
use both bits when (un)masking the interrupt.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Link: http://lkml.kernel.org/r/5093E09002000078000A60E6@nat28.tlf.novell.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/hpet.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -434,7 +434,7 @@ void hpet_msi_unmask(struct irq_data *da
 
 	/* unmask it */
 	cfg = hpet_readl(HPET_Tn_CFG(hdev->num));
-	cfg |= HPET_TN_FSB;
+	cfg |= HPET_TN_ENABLE | HPET_TN_FSB;
 	hpet_writel(cfg, HPET_Tn_CFG(hdev->num));
 }
 
@@ -445,7 +445,7 @@ void hpet_msi_mask(struct irq_data *data
 
 	/* mask it */
 	cfg = hpet_readl(HPET_Tn_CFG(hdev->num));
-	cfg &= ~HPET_TN_FSB;
+	cfg &= ~(HPET_TN_ENABLE | HPET_TN_FSB);
 	hpet_writel(cfg, HPET_Tn_CFG(hdev->num));
 }
 

[ 17/37] USB: add new zte 3g-dongles pid to option.c

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "li.rui27@zte.com.cn" <li.rui27@zte.com.cn>

commit 31b6a1048b7292efff8b5b53ae3d9d29adde385e upstream.

Signed-off-by: Rui li <li.rui27@zte.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |   22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -884,6 +884,10 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0126, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0128, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0135, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0136, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0137, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0139, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0142, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0143, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0144, 0xff, 0xff, 0xff) },
@@ -904,20 +908,34 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0165, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0167, 0xff, 0xff, 0xff),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0189, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0191, 0xff, 0xff, 0xff), /* ZTE EuFi890 */
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0196, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0197, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0199, 0xff, 0xff, 0xff), /* ZTE MF820S */
 	  .driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0200, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0201, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0254, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0257, 0xff, 0xff, 0xff), /* ZTE MF821 */
 	  .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0265, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0284, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0317, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0326, 0xff, 0xff, 0xff),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0330, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0395, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0414, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0417, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1018, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1021, 0xff, 0xff, 0xff),
 	  .driver_info = (kernel_ulong_t)&net_intf2_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1057, 0xff, 0xff, 0xff) },
@@ -1097,6 +1115,10 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1298, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1299, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1300, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1301, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1302, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1303, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1333, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1401, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1402, 0xff, 0xff, 0xff),

[ 18/37] USB: option: blacklist network interface on Huawei E173

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bjørn Mork <bjorn@mork.no>

commit f36446cf9bbebaa03a80d95cfeeafbaf68218249 upstream.

The Huawei E173 will normally appear as 12d1:1436 in Linux.  But
the modem has another mode with different device ID and a slightly
different set of descriptors. This is the mode used by Windows like
this:

  3Modem:      USB\VID_12D1&PID_140C&MI_00\6&3A1D2012&0&0000
  Networkcard: USB\VID_12D1&PID_140C&MI_01\6&3A1D2012&0&0001
  Appli.Inter: USB\VID_12D1&PID_140C&MI_02\6&3A1D2012&0&0002
  PC UI Inter: USB\VID_12D1&PID_140C&MI_03\6&3A1D2012&0&0003

All interfaces have the same ff/ff/ff class codes in this mode.
Blacklisting the network interface to allow it to be picked up by
the network driver.

Reported-by: Thomas Schäfer <tschaefer@t-online.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -81,6 +81,7 @@ static void option_instat_callback(struc
 #define OPTION_PRODUCT_GTM380_MODEM		0x7201
 
 #define HUAWEI_VENDOR_ID			0x12D1
+#define HUAWEI_PRODUCT_E173			0x140C
 #define HUAWEI_PRODUCT_K4505			0x1464
 #define HUAWEI_PRODUCT_K3765			0x1465
 #define HUAWEI_PRODUCT_K4605			0x14C6
@@ -553,6 +554,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLX) },
 	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GKE) },
 	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLE) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t) &net_intf1_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff),

[ 19/37] USB: ftdi_sio: Add support for Newport AGILIS motor drivers

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Martin Teichmann <lkb.teichmann@gmail.com>

commit d7e14b375b40c04cd735b115713043b69a2c68ac upstream.

The Newport AGILIS model AG-UC8 compact piezo motor controller
(http://search.newport.com/?q=*&x2=sku&q2=AG-UC8)
is yet another device using an FTDI USB-to-serial chip. It works
fine with the ftdi_sio driver when adding

  options ftdi-sio product=0x3000 vendor=0x104d

to modprobe.d. udevadm reports "Newport" as the manufacturer,
and "Agilis" as the product name.

Signed-off-by: Martin Teichmann <lkb.teichmann@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/ftdi_sio.c     |    1 +
 drivers/usb/serial/ftdi_sio_ids.h |    6 ++++++
 2 files changed, 7 insertions(+)

--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -197,6 +197,7 @@ static struct usb_device_id id_table_com
 	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_THROTTLE_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GATEWAY_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_PID) },
+	{ USB_DEVICE(NEWPORT_VID, NEWPORT_AGILIS_PID) },
 	{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
 	{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SPROG_II) },
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -752,6 +752,12 @@
 #define TTI_VID			0x103E	/* Vendor Id */
 #define TTI_QL355P_PID		0x03E8	/* TTi QL355P power supply */
 
+/*
+ * Newport Cooperation (www.newport.com)
+ */
+#define NEWPORT_VID			0x104D
+#define NEWPORT_AGILIS_PID		0x3000
+
 /* Interbiometrics USB I/O Board */
 /* Developed for Interbiometrics by Rudolf Gugler */
 #define INTERBIOMETRICS_VID              0x1209

[ 20/37] usb: ftdi_sio: fixup BeagleBone A5+ quirk

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Korsgaard <jacmet@sunsite.dk>

commit 1a88d5eee2ef2ad1d3c4e32043e9c4c5347d4fc1 upstream.

BeagleBone A5+ devices ended up getting shipped with the
'BeagleBone/XDS100V2' product string, and not XDS100 like it
was agreed, so adjust the quirk to match.

For details, see the thread on the beagle list:

https://groups.google.com/forum/#!msg/beagleboard/zrFPew9_Wvo/ibWr1-eE8JwJ

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/ftdi_sio.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1788,7 +1788,7 @@ static int ftdi_8u2232c_probe(struct usb
 	struct usb_device *udev = serial->dev;
 
 	if ((udev->manufacturer && !strcmp(udev->manufacturer, "CALAO Systems")) ||
-	    (udev->product && !strcmp(udev->product, "BeagleBone/XDS100")))
+	    (udev->product && !strcmp(udev->product, "BeagleBone/XDS100V2")))
 		return ftdi_jtag_probe(serial);
 
 	return 0;

[ 21/37] USB: cp210x: add Virtenio Preon32 device id

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Markus Becker <mab@comnets.uni-bremen.de>

commit 356fe44f4b8ece867bdb9876b1854d7adbef9de2 upstream.

Signed-off-by: Markus Becker <mab@comnets.uni-bremen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/cp210x.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -120,6 +120,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */
 	{ USB_DEVICE(0x10C4, 0x85EA) }, /* AC-Services IBUS-IF */
 	{ USB_DEVICE(0x10C4, 0x85EB) }, /* AC-Services CIS-IBUS */
+	{ USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */
 	{ USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */
 	{ USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */

[ 22/37] USB: mark uas driver as BROKEN

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit fb37ef98015f864d22be223a0e0d93547cd1d4ef upstream.

As reported https://bugzilla.kernel.org/show_bug.cgi?id=51031, the UAS
driver causes problems and has been asked to be not built into any of
the major distributions.  To prevent users from running into problems
with it, and for distros that were not notified, just mark the whole
thing as broken.

Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/storage/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -203,7 +203,7 @@ config USB_STORAGE_ENE_UB6250
 
 config USB_UAS
 	tristate "USB Attached SCSI"
-	depends on USB && SCSI
+	depends on USB && SCSI && BROKEN
 	help
 	  The USB Attached SCSI protocol is supported by some USB
 	  storage devices.  It permits higher performance by supporting

[ 23/37] ACPI / battery: Correct battery capacity values on Thinkpads

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kamil Iskra <kamil@iskra.name>

commit 4000e626156935dfb626321ce09cae2c833eabbb upstream.

Add a quirk to correctly report battery capacity on 2010 and 2011
Lenovo Thinkpad models.

The affected models that I tested (x201, t410, t410s, and x220)
exhibit a problem where, when battery capacity reporting unit is mAh,
the values being reported are wrong.  Pre-2010 and 2012 models appear
to always report in mWh and are thus unaffected.  Also, in mid-2012
Lenovo issued a BIOS update for the 2011 models that fixes the issue
(tested on x220 with a post-1.29 BIOS).  No such update is available
for the 2010 models, so those still need this patch.

Problem description: for some reason, the affected Thinkpads switch
the reporting unit between mAh and mWh; generally, mAh is used when a
laptop is plugged in and mWh when it's unplugged, although a
suspend/resume or rmmod/modprobe is needed for the switch to take
effect.  The values reported in mAh are *always* wrong.  This does
not appear to be a kernel regression; I believe that the values were
never reported correctly.  I tested back to kernel 2.6.34, with
multiple machines and BIOS versions.

Simply plugging a laptop into mains before turning it on is enough to
reproduce the problem.  Here's a sample /proc/acpi/battery/BAT0/info
from Thinkpad x220 (before a BIOS update) with a 4-cell battery:

present:                 yes
design capacity:         2886 mAh
last full capacity:      2909 mAh
battery technology:      rechargeable
design voltage:          14800 mV
design capacity warning: 145 mAh
design capacity low:     13 mAh
cycle count:              0
capacity granularity 1:  1 mAh
capacity granularity 2:  1 mAh
model number:            42T4899
serial number:           21064
battery type:            LION
OEM info:                SANYO

Once the laptop switches the unit to mWh (unplug from mains, suspend,
resume), the output changes to:

present:                 yes
design capacity:         28860 mWh
last full capacity:      29090 mWh
battery technology:      rechargeable
design voltage:          14800 mV
design capacity warning: 1454 mWh
design capacity low:     200 mWh
cycle count:              0
capacity granularity 1:  1 mWh
capacity granularity 2:  1 mWh
model number:            42T4899
serial number:           21064
battery type:            LION
OEM info:                SANYO

Can you see how the values for "design capacity", etc., differ by a
factor of 10 instead of 14.8 (the design voltage of this battery)?
On the battery itself it says: 14.8V, 1.95Ah, 29Wh, so clearly the
values reported in mWh are correct and the ones in mAh are not.

My guess is that this problem has been around ever since those
machines were released, but because the most common Thinkpad
batteries are rated at 10.8V, the error (8%) is small enough that it
simply hasn't been noticed or at least nobody could be bothered to
look into it.

My patch works around the problem by adjusting the incorrectly
reported mAh values by "10000 / design_voltage".  The patch also has
code to figure out if it should be activated or not.  It only
activates on Lenovo Thinkpads, only when the unit is mAh, and, as an
extra precaution, only when the battery capacity reported through
ACPI does not match what is reported through DMI (I've never
encountered a machine where the first two conditions would be true
but the last would not, but better safe than sorry).

I've been using this patch for close to a year on several systems
without any problems.

References: https://bugzilla.kernel.org/show_bug.cgi?id=41062
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/acpi/battery.c |   77 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 77 insertions(+)

--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -34,6 +34,7 @@
 #include <linux/dmi.h>
 #include <linux/slab.h>
 #include <linux/suspend.h>
+#include <asm/unaligned.h>
 
 #ifdef CONFIG_ACPI_PROCFS_POWER
 #include <linux/proc_fs.h>
@@ -95,6 +96,18 @@ enum {
 	ACPI_BATTERY_ALARM_PRESENT,
 	ACPI_BATTERY_XINFO_PRESENT,
 	ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY,
+	/* On Lenovo Thinkpad models from 2010 and 2011, the power unit
+	   switches between mWh and mAh depending on whether the system
+	   is running on battery or not.  When mAh is the unit, most
+	   reported values are incorrect and need to be adjusted by
+	   10000/design_voltage.  Verified on x201, t410, t410s, and x220.
+	   Pre-2010 and 2012 models appear to always report in mWh and
+	   are thus unaffected (tested with t42, t61, t500, x200, x300,
+	   and x230).  Also, in mid-2012 Lenovo issued a BIOS update for
+	   the 2011 models that fixes the issue (tested on x220 with a
+	   post-1.29 BIOS), but as of Nov. 2012, no such update is
+	   available for the 2010 models.  */
+	ACPI_BATTERY_QUIRK_THINKPAD_MAH,
 };
 
 struct acpi_battery {
@@ -438,6 +451,21 @@ static int acpi_battery_get_info(struct
 	kfree(buffer.pointer);
 	if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags))
 		battery->full_charge_capacity = battery->design_capacity;
+	if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags) &&
+	    battery->power_unit && battery->design_voltage) {
+		battery->design_capacity = battery->design_capacity *
+		    10000 / battery->design_voltage;
+		battery->full_charge_capacity = battery->full_charge_capacity *
+		    10000 / battery->design_voltage;
+		battery->design_capacity_warning =
+		    battery->design_capacity_warning *
+		    10000 / battery->design_voltage;
+		/* Curiously, design_capacity_low, unlike the rest of them,
+		   is correct.  */
+		/* capacity_granularity_* equal 1 on the systems tested, so
+		   it's impossible to tell if they would need an adjustment
+		   or not if their values were higher.  */
+	}
 	return result;
 }
 
@@ -486,6 +514,11 @@ static int acpi_battery_get_state(struct
 	    && battery->capacity_now >= 0 && battery->capacity_now <= 100)
 		battery->capacity_now = (battery->capacity_now *
 				battery->full_charge_capacity) / 100;
+	if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags) &&
+	    battery->power_unit && battery->design_voltage) {
+		battery->capacity_now = battery->capacity_now *
+		    10000 / battery->design_voltage;
+	}
 	return result;
 }
 
@@ -595,6 +628,24 @@ static void sysfs_remove_battery(struct
 	mutex_unlock(&battery->sysfs_lock);
 }
 
+static void find_battery(const struct dmi_header *dm, void *private)
+{
+	struct acpi_battery *battery = (struct acpi_battery *)private;
+	/* Note: the hardcoded offsets below have been extracted from
+	   the source code of dmidecode.  */
+	if (dm->type == DMI_ENTRY_PORTABLE_BATTERY && dm->length >= 8) {
+		const u8 *dmi_data = (const u8 *)(dm + 1);
+		int dmi_capacity = get_unaligned((const u16 *)(dmi_data + 6));
+		if (dm->length >= 18)
+			dmi_capacity *= dmi_data[17];
+		if (battery->design_capacity * battery->design_voltage / 1000
+		    != dmi_capacity &&
+		    battery->design_capacity * 10 == dmi_capacity)
+			set_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH,
+				&battery->flags);
+	}
+}
+
 /*
  * According to the ACPI spec, some kinds of primary batteries can
  * report percentage battery remaining capacity directly to OS.
@@ -620,6 +671,32 @@ static void acpi_battery_quirks(struct a
 		battery->capacity_now = (battery->capacity_now *
 				battery->full_charge_capacity) / 100;
 	}
+
+	if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags))
+		return ;
+
+	if (battery->power_unit && dmi_name_in_vendors("LENOVO")) {
+		const char *s;
+		s = dmi_get_system_info(DMI_PRODUCT_VERSION);
+		if (s && !strnicmp(s, "ThinkPad", 8)) {
+			dmi_walk(find_battery, battery);
+			if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH,
+				     &battery->flags) &&
+			    battery->design_voltage) {
+				battery->design_capacity =
+				    battery->design_capacity *
+				    10000 / battery->design_voltage;
+				battery->full_charge_capacity =
+				    battery->full_charge_capacity *
+				    10000 / battery->design_voltage;
+				battery->design_capacity_warning =
+				    battery->design_capacity_warning *
+				    10000 / battery->design_voltage;
+				battery->capacity_now = battery->capacity_now *
+				    10000 / battery->design_voltage;
+			}
+		}
+	}
 }
 
 static int acpi_battery_update(struct acpi_battery *battery)

[ 24/37] ACPI / PM: Add Sony Vaio VPCEB1S1E to nonvs blacklist.

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lan Tianyu <tianyu.lan@intel.com>

commit 876ab79055019e248508cfd0dee7caa3c0c831ed upstream.

Sony Vaio VPCEB1S1E does not resume correctly without
acpi_sleep=nonvs, so add it to the ACPI sleep blacklist.

References: https://bugzilla.kernel.org/show_bug.cgi?id=48781
Reported-by: Sébastien Wilmet <swilmet@gnome.org>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/acpi/sleep.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -519,6 +519,14 @@ static struct dmi_system_id __initdata a
 	},
 	{
 	.callback = init_nvs_nosave,
+	.ident = "Sony Vaio VPCEB1S1E",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1S1E"),
+		},
+	},
+	{
+	.callback = init_nvs_nosave,
 	.ident = "Sony Vaio VGN-FW520F",
 	.matches = {
 		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),

[ 25/37] ACPI / PNP: Do not crash due to stale pointer use during system resume

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>

commit a6b5e88c0e42093b9057856f35770966c8c591e3 upstream.

During resume from system suspend the 'data' field of
struct pnp_dev in pnpacpi_set_resources() may be a stale pointer,
due to removal of the associated ACPI device node object in the
previous suspend-resume cycle.  This happens, for example, if a
dockable machine is booted in the docking station and then suspended
and resumed and suspended again.  If that happens,
pnpacpi_build_resource_template() called from pnpacpi_set_resources()
attempts to use that pointer and crashes.

However, pnpacpi_set_resources() actually checks the device's ACPI
handle, attempts to find the ACPI device node object attached to it
and returns an error code if that fails, so in fact it knows what the
correct value of dev->data should be.  Use this observation to update
dev->data with the correct value if necessary and dump a call trace
if that's the case (once).

We still need to fix the root cause of this issue, but preventing
systems from crashing because of it is an improvement too.

Reported-and-tested-by: Zdenek Kabelac <zdenek.kabelac@gmail.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=51071
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pnp/pnpacpi/core.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/pnp/pnpacpi/core.c
+++ b/drivers/pnp/pnpacpi/core.c
@@ -95,6 +95,9 @@ static int pnpacpi_set_resources(struct
 		return -ENODEV;
 	}
 
+	if (WARN_ON_ONCE(acpi_dev != dev->data))
+		dev->data = acpi_dev;
+
 	ret = pnpacpi_build_resource_template(dev, &buffer);
 	if (ret)
 		return ret;

[ 26/37] ACPI / video: ignore BIOS initial backlight value for HP Folio 13-2000

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zhang Rui <rui.zhang@intel.com>

commit 129ff8f8d58297b04f47b5d6fad81aa2d08404e1 upstream.

Or else the laptop will boot with a dimmed screen.

References: https://bugzilla.kernel.org/show_bug.cgi?id=51141
Tested-by: Stefan Nagy <public@stefan-nagy.at>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/acpi/video.c |   14 ++++++++++++++
 1 file changed, 14 insertions(+)

--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -389,6 +389,12 @@ static int __init video_set_bqc_offset(c
 	return 0;
 }
 
+static int video_ignore_initial_backlight(const struct dmi_system_id *d)
+{
+	use_bios_initial_backlight = 0;
+	return 0;
+}
+
 static struct dmi_system_id video_dmi_table[] __initdata = {
 	/*
 	 * Broken _BQC workaround http://bugzilla.kernel.org/show_bug.cgi?id=13121
@@ -433,6 +439,14 @@ static struct dmi_system_id video_dmi_ta
 		DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 7720"),
 		},
 	},
+	{
+	 .callback = video_ignore_initial_backlight,
+	 .ident = "HP Folio 13-2000",
+	 .matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "HP Folio 13 - 2000 Notebook PC"),
+		},
+	},
 	{}
 };
 

[ 27/37] ACPI / video: Add "Asus UL30VT" to ACPI video detect blacklist

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lan Tianyu <tianyu.lan@intel.com>

commit d0c2ce16bec0afa6013b4c5220ca4c9c67210215 upstream.

The ACPI video driver can't control backlight correctly on
Asus UL30VT.  Vendor driver (asus-laptop) can work.  This patch is to
add "Asus UL30VT" to ACPI video detect blacklist in order to use
asus-laptop for video control on the "Asus UL30VT" rather than ACPI
video driver.

References: https://bugzilla.kernel.org/show_bug.cgi?id=32592
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/acpi/video_detect.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -156,6 +156,14 @@ static struct dmi_system_id video_detect
 		DMI_MATCH(DMI_BOARD_NAME, "X360"),
 		},
 	},
+	{
+	.callback = video_detect_force_vendor,
+	.ident = "Asus UL30VT",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "UL30VT"),
+		},
+	},
 	{ },
 };
 

[ 28/37] USB: OHCI: workaround for hardware bug: retired TDs not added to the Done Queue

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alan Stern <stern@rowland.harvard.edu>

commit 50ce5c0683aa83eb161624ea89daa5a9eee0c2ce upstream.

This patch (as1636) is a partial workaround for a hardware bug
affecting OHCI controllers by NVIDIA at least, maybe others too.  When
the controller retires a Transfer Descriptor, it is supposed to add
the TD onto the Done Queue.  But sometimes this doesn't happen, with
the result that ohci-hcd never realizes the corresponding transfer has
finished.  Symptoms can vary; a typical result is that USB audio stops
working after a while.

The patch works around the problem by recognizing that TDs are always
processed in order.  Therefore, if a later TD is found on the Done
Queue than all the earlier TDs for the same endpoint must be finished
as well.

Unfortunately this won't solve the problem in cases where the missing
TD is the last one in the endpoint's queue.  A complete fix would
require a signficant amount of change to the driver.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/ohci-q.c |   19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

--- a/drivers/usb/host/ohci-q.c
+++ b/drivers/usb/host/ohci-q.c
@@ -1128,6 +1128,25 @@ dl_done_list (struct ohci_hcd *ohci)
 
 	while (td) {
 		struct td	*td_next = td->next_dl_td;
+		struct ed	*ed = td->ed;
+
+		/*
+		 * Some OHCI controllers (NVIDIA for sure, maybe others)
+		 * occasionally forget to add TDs to the done queue.  Since
+		 * TDs for a given endpoint are always processed in order,
+		 * if we find a TD on the donelist then all of its
+		 * predecessors must be finished as well.
+		 */
+		for (;;) {
+			struct td	*td2;
+
+			td2 = list_first_entry(&ed->td_list, struct td,
+					td_list);
+			if (td2 == td)
+				break;
+			takeback_td(ohci, td2);
+		}
+
 		takeback_td(ohci, td);
 		td = td_next;
 	}

[ 29/37] xhci: Extend Fresco Logic MSI quirk.

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sarah Sharp <sarah.a.sharp@linux.intel.com>

commit bba18e33f25072ebf70fd8f7f0cdbf8cdb59a746 upstream.

Ali reports that plugging a device into the Fresco Logic xHCI host with
PCI device ID 1400 produces an IRQ error:

 do_IRQ: 3.176 No irq handler for vector (irq -1)

Other early Fresco Logic host revisions don't support MSI, even though
their PCI config space claims they do.  Extend the quirk to disabling
MSI to this chipset revision.  Also enable the short transfer quirk,
since it's likely this revision also has that quirk, and it should be
harmless to enable.

04:00.0 0c03: 1b73:1400 (rev 01) (prog-if 30 [XHCI])
        Subsystem: 1d5c:1000
        Physical Slot: 3
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 51
        Region 0: Memory at d4600000 (32-bit, non-prefetchable) [size=64K]
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+
                Address: 00000000feeff00c  Data: 41b1
        Capabilities: [80] Express (v1) Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <2us, L1 <32us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 unlimited, L1 unlimited
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        Kernel driver in use: xhci_hcd

This patch should be backported to stable kernels as old as 2.6.36, that
contain the commit f5182b4155b9d686c5540a6822486400e34ddd98 "xhci:
Disable MSI for some Fresco Logic hosts."

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: A Sh <smr.ash1991@gmail.com>
Tested-by: A Sh <smr.ash1991@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/xhci-pci.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -29,6 +29,7 @@
 /* Device for a quirk */
 #define PCI_VENDOR_ID_FRESCO_LOGIC	0x1b73
 #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK	0x1000
+#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1400	0x1400
 
 #define PCI_VENDOR_ID_ETRON		0x1b6f
 #define PCI_DEVICE_ID_ASROCK_P67	0x7023
@@ -58,8 +59,10 @@ static void xhci_pci_quirks(struct devic
 
 	/* Look for vendor-specific quirks */
 	if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
-			pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK) {
-		if (pdev->revision == 0x0) {
+			(pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK ||
+			 pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1400)) {
+		if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
+				pdev->revision == 0x0) {
 			xhci->quirks |= XHCI_RESET_EP_QUIRK;
 			xhci_dbg(xhci, "QUIRK: Fresco Logic xHC needs configure"
 					" endpoint cmd after reset endpoint\n");

[ 30/37] ftrace: Clear bits properly in reset_iter_read()

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 70f77b3f7ec010ff9624c1f2e39a81babc9e2429 upstream.

There is a typo here where '&' is used instead of '|' and it turns the
statement into a noop.  The original code is equivalent to:

	iter->flags &= ~((1 << 2) & (1 << 4));

Link: http://lkml.kernel.org/r/20120609161027.GD6488@elgon.mountain

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/trace/ftrace.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -2358,7 +2358,7 @@ static void reset_iter_read(struct ftrac
 {
 	iter->pos = 0;
 	iter->func_pos = 0;
-	iter->flags &= ~(FTRACE_ITER_PRINTALL & FTRACE_ITER_HASH);
+	iter->flags &= ~(FTRACE_ITER_PRINTALL | FTRACE_ITER_HASH);
 }
 
 static void *t_start(struct seq_file *m, loff_t *pos)

[ 31/37] ring-buffer: Fix NULL pointer if rb_set_head_page() fails

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steven Rostedt <srostedt@redhat.com>

commit 54f7be5b831254199522523ccab4c3d954bbf576 upstream.

The function rb_set_head_page() searches the list of ring buffer
pages for a the page that has the HEAD page flag set. If it does
not find it, it will do a WARN_ON(), disable the ring buffer and
return NULL, as this should never happen.

But if this bug happens to happen, not all callers of this function
can handle a NULL pointer being returned from it. That needs to be
fixed.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/trace/ring_buffer.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -1396,6 +1396,8 @@ rb_insert_pages(struct ring_buffer_per_c
 		struct list_head *head_page_with_bit;
 
 		head_page = &rb_set_head_page(cpu_buffer)->list;
+		if (!head_page)
+			break;
 		prev_page = head_page->prev;
 
 		first_page = pages->next;
@@ -2934,7 +2936,7 @@ unsigned long ring_buffer_oldest_event_t
 	unsigned long flags;
 	struct ring_buffer_per_cpu *cpu_buffer;
 	struct buffer_page *bpage;
-	unsigned long ret;
+	unsigned long ret = 0;
 
 	if (!cpumask_test_cpu(cpu, buffer->cpumask))
 		return 0;
@@ -2949,7 +2951,8 @@ unsigned long ring_buffer_oldest_event_t
 		bpage = cpu_buffer->reader_page;
 	else
 		bpage = rb_set_head_page(cpu_buffer);
-	ret = bpage->page->time_stamp;
+	if (bpage)
+		ret = bpage->page->time_stamp;
 	raw_spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
 
 	return ret;
@@ -3260,6 +3263,8 @@ rb_get_reader_page(struct ring_buffer_pe
 	 * Splice the empty reader page into the list around the head.
 	 */
 	reader = rb_set_head_page(cpu_buffer);
+	if (!reader)
+		goto out;
 	cpu_buffer->reader_page->list.next = rb_list_head(reader->list.next);
 	cpu_buffer->reader_page->list.prev = reader->list.prev;
 

[ 32/37] ring-buffer: Fix race between integrity check and readers

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steven Rostedt <srostedt@redhat.com>

commit 9366c1ba13fbc41bdb57702e75ca4382f209c82f upstream.

The function rb_check_pages() was added to make sure the ring buffer's
pages were sane. This check is done when the ring buffer size is modified
as well as when the iterator is released (closing the "trace" file),
as that was considered a non fast path and a good place to do a sanity
check.

The problem is that the check does not have any locks around it.
If one process were to read the trace file, and another were to read
the raw binary file, the check could happen while the reader is reading
the file.

The issues with this is that the check requires to clear the HEAD page
before doing the full check and it restores it afterward. But readers
require the HEAD page to exist before it can read the buffer, otherwise
it gives a nasty warning and disables the buffer.

By adding the reader lock around the check, this keeps the race from
happening.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/trace/ring_buffer.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -3783,12 +3783,17 @@ void
 ring_buffer_read_finish(struct ring_buffer_iter *iter)
 {
 	struct ring_buffer_per_cpu *cpu_buffer = iter->cpu_buffer;
+	unsigned long flags;
 
 	/*
 	 * Ring buffer is disabled from recording, here's a good place
-	 * to check the integrity of the ring buffer. 
+	 * to check the integrity of the ring buffer.
+	 * Must prevent readers from trying to read, as the check
+	 * clears the HEAD page and readers require it.
 	 */
+	raw_spin_lock_irqsave(&cpu_buffer->reader_lock, flags);
 	rb_check_pages(cpu_buffer);
+	raw_spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
 
 	atomic_dec(&cpu_buffer->record_disabled);
 	atomic_dec(&cpu_buffer->buffer->resize_disabled);

[ 33/37] cdc-acm: implement TIOCSSERIAL to avoid blocking close(2)

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Williams <dcbw@redhat.com>

commit ba2d8ce9db0a61505362bb17b8899df3d3326146 upstream.

Some devices (ex Nokia C7) simply don't respond at all when data is sent
to some of their USB interfaces.  The data gets stuck in the TTYs queue
and sits there until close(2), which them blocks because closing_wait
defaults to 30 seconds (even though the fd is O_NONBLOCK).  This is
rarely desired.  Implement the standard mechanism to adjust closing_wait
and let applications handle it how they want to.

See also 02303f73373aa1da19dbec510ec5a4e2576f9610 for usb_wwan.c.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Acked-by: Oliver Neukum <oneukum@suse.de>
Tested-by: Aleksander Morgado <aleksander@gnu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/class/cdc-acm.c |   38 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -788,6 +788,10 @@ static int get_serial_info(struct acm *a
 	tmp.flags = ASYNC_LOW_LATENCY;
 	tmp.xmit_fifo_size = acm->writesize;
 	tmp.baud_base = le32_to_cpu(acm->line.dwDTERate);
+	tmp.close_delay	= acm->port.close_delay / 10;
+	tmp.closing_wait = acm->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
+				ASYNC_CLOSING_WAIT_NONE :
+				acm->port.closing_wait / 10;
 
 	if (copy_to_user(info, &tmp, sizeof(tmp)))
 		return -EFAULT;
@@ -795,6 +799,37 @@ static int get_serial_info(struct acm *a
 		return 0;
 }
 
+static int set_serial_info(struct acm *acm,
+				struct serial_struct __user *newinfo)
+{
+	struct serial_struct new_serial;
+	unsigned int closing_wait, close_delay;
+	int retval = 0;
+
+	if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
+		return -EFAULT;
+
+	close_delay = new_serial.close_delay * 10;
+	closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
+			ASYNC_CLOSING_WAIT_NONE : new_serial.closing_wait * 10;
+
+	mutex_lock(&acm->port.mutex);
+
+	if (!capable(CAP_SYS_ADMIN)) {
+		if ((close_delay != acm->port.close_delay) ||
+		    (closing_wait != acm->port.closing_wait))
+			retval = -EPERM;
+		else
+			retval = -EOPNOTSUPP;
+	} else {
+		acm->port.close_delay  = close_delay;
+		acm->port.closing_wait = closing_wait;
+	}
+
+	mutex_unlock(&acm->port.mutex);
+	return retval;
+}
+
 static int acm_tty_ioctl(struct tty_struct *tty,
 					unsigned int cmd, unsigned long arg)
 {
@@ -805,6 +840,9 @@ static int acm_tty_ioctl(struct tty_stru
 	case TIOCGSERIAL: /* gets serial port data */
 		rv = get_serial_info(acm, (struct serial_struct __user *) arg);
 		break;
+	case TIOCSSERIAL:
+		rv = set_serial_info(acm, (struct serial_struct __user *) arg);
+		break;
 	}
 
 	return rv;

[ 34/37] perf test: fix a build error on builtin-test

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zheng Liu <gnehzuil.liu@gmail.com>

commit 12f8f74b2a4d26c4facfa7ef99487cf0930f6ef7 upstream.

Recently I build perf and get a build error on builtin-test.c. The error is as
following:

$ make
    CC perf.o
    CC builtin-test.o
cc1: warnings being treated as errors
builtin-test.c: In function ‘sched__get_first_possible_cpu’:
builtin-test.c:977: warning: implicit declaration of function ‘CPU_ALLOC’
builtin-test.c:977: warning: nested extern declaration of ‘CPU_ALLOC’
builtin-test.c:977: warning: assignment makes pointer from integer without a cast
builtin-test.c:978: warning: implicit declaration of function ‘CPU_ALLOC_SIZE’
builtin-test.c:978: warning: nested extern declaration of ‘CPU_ALLOC_SIZE’
builtin-test.c:979: warning: implicit declaration of function ‘CPU_ZERO_S’
builtin-test.c:979: warning: nested extern declaration of ‘CPU_ZERO_S’
builtin-test.c:982: warning: implicit declaration of function ‘CPU_FREE’
builtin-test.c:982: warning: nested extern declaration of ‘CPU_FREE’
builtin-test.c:992: warning: implicit declaration of function ‘CPU_ISSET_S’
builtin-test.c:992: warning: nested extern declaration of ‘CPU_ISSET_S’
builtin-test.c:998: warning: implicit declaration of function ‘CPU_CLR_S’
builtin-test.c:998: warning: nested extern declaration of ‘CPU_CLR_S’
make: *** [builtin-test.o] Error 1

This problem is introduced in 3e7c439a. CPU_ALLOC and related macros are
missing in sched__get_first_possible_cpu function. In 54489c18, commiter
mentioned that CPU_ALLOC has been removed. So CPU_ALLOC calls in this
function are removed to let perf to be built.

Signed-off-by: Vinson Lee <vlee@twitter.com>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vinson Lee <vlee@twitter.com>
Cc: Zheng Liu <wenqing.lz@taobao.com>
Link: http://lkml.kernel.org/r/1352422726-31114-1-git-send-email-vlee@twitter.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/perf/builtin-test.c |   38 ++++++++++++--------------------------
 1 file changed, 12 insertions(+), 26 deletions(-)

--- a/tools/perf/builtin-test.c
+++ b/tools/perf/builtin-test.c
@@ -602,19 +602,13 @@ out_free_threads:
 #undef nsyscalls
 }
 
-static int sched__get_first_possible_cpu(pid_t pid, cpu_set_t **maskp,
-					 size_t *sizep)
+static int sched__get_first_possible_cpu(pid_t pid, cpu_set_t *maskp)
 {
-	cpu_set_t *mask;
-	size_t size;
 	int i, cpu = -1, nrcpus = 1024;
 realloc:
-	mask = CPU_ALLOC(nrcpus);
-	size = CPU_ALLOC_SIZE(nrcpus);
-	CPU_ZERO_S(size, mask);
+	CPU_ZERO(maskp);
 
-	if (sched_getaffinity(pid, size, mask) == -1) {
-		CPU_FREE(mask);
+	if (sched_getaffinity(pid, sizeof(*maskp), maskp) == -1) {
 		if (errno == EINVAL && nrcpus < (1024 << 8)) {
 			nrcpus = nrcpus << 2;
 			goto realloc;
@@ -624,19 +618,14 @@ realloc:
 	}
 
 	for (i = 0; i < nrcpus; i++) {
-		if (CPU_ISSET_S(i, size, mask)) {
-			if (cpu == -1) {
+		if (CPU_ISSET(i, maskp)) {
+			if (cpu == -1)
 				cpu = i;
-				*maskp = mask;
-				*sizep = size;
-			} else
-				CPU_CLR_S(i, size, mask);
+			else
+				CPU_CLR(i, maskp);
 		}
 	}
 
-	if (cpu == -1)
-		CPU_FREE(mask);
-
 	return cpu;
 }
 
@@ -651,8 +640,8 @@ static int test__PERF_RECORD(void)
 		.freq	    = 10,
 		.mmap_pages = 256,
 	};
-	cpu_set_t *cpu_mask = NULL;
-	size_t cpu_mask_size = 0;
+	cpu_set_t cpu_mask;
+	size_t cpu_mask_size = sizeof(cpu_mask);
 	struct perf_evlist *evlist = perf_evlist__new(NULL, NULL);
 	struct perf_evsel *evsel;
 	struct perf_sample sample;
@@ -716,8 +705,7 @@ static int test__PERF_RECORD(void)
 	evsel->attr.sample_type |= PERF_SAMPLE_TIME;
 	perf_evlist__config_attrs(evlist, &opts);
 
-	err = sched__get_first_possible_cpu(evlist->workload.pid, &cpu_mask,
-					    &cpu_mask_size);
+	err = sched__get_first_possible_cpu(evlist->workload.pid, &cpu_mask);
 	if (err < 0) {
 		pr_debug("sched__get_first_possible_cpu: %s\n", strerror(errno));
 		goto out_delete_evlist;
@@ -728,9 +716,9 @@ static int test__PERF_RECORD(void)
 	/*
 	 * So that we can check perf_sample.cpu on all the samples.
 	 */
-	if (sched_setaffinity(evlist->workload.pid, cpu_mask_size, cpu_mask) < 0) {
+	if (sched_setaffinity(evlist->workload.pid, cpu_mask_size, &cpu_mask) < 0) {
 		pr_debug("sched_setaffinity: %s\n", strerror(errno));
-		goto out_free_cpu_mask;
+		goto out_delete_evlist;
 	}
 
 	/*
@@ -914,8 +902,6 @@ found_exit:
 	}
 out_err:
 	perf_evlist__munmap(evlist);
-out_free_cpu_mask:
-	CPU_FREE(cpu_mask);
 out_delete_evlist:
 	perf_evlist__delete(evlist);
 out:

[ 35/37] USB: EHCI: bugfix: urb->hcpriv should not be NULL

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alan Stern <stern@rowland.harvard.edu>

commit 2656a9abcf1ec8dd5fee6a75d6997a0f2fa0094e upstream.

This patch (as1632b) fixes a bug in ehci-hcd.  The USB core uses
urb->hcpriv to determine whether or not an URB is active; host
controller drivers are supposed to set this pointer to a non-NULL
value when an URB is queued.  However ehci-hcd sets it to NULL for
isochronous URBs, which defeats the check in usbcore.

In itself this isn't a big deal.  But people have recently found that
certain sequences of actions will cause the snd-usb-audio driver to
reuse URBs without waiting for them to complete.  In the absence of
proper checking by usbcore, the URBs get added to their endpoint list
twice.  This leads to list corruption and a system freeze.

The patch makes ehci-hcd assign a meaningful value to urb->hcpriv for
isochronous URBs.  Improving robustness always helps.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Artem S. Tashkinov <t.artem@lycos.com>
Reported-by: Christof Meerwald <cmeerw@cmeerw.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/ehci-q.c     |   12 +++---------
 drivers/usb/host/ehci-sched.c |    4 ++--
 2 files changed, 5 insertions(+), 11 deletions(-)

--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -264,15 +264,9 @@ ehci_urb_done(struct ehci_hcd *ehci, str
 __releases(ehci->lock)
 __acquires(ehci->lock)
 {
-	if (likely (urb->hcpriv != NULL)) {
-		struct ehci_qh	*qh = (struct ehci_qh *) urb->hcpriv;
-
-		/* S-mask in a QH means it's an interrupt urb */
-		if ((qh->hw->hw_info2 & cpu_to_hc32(ehci, QH_SMASK)) != 0) {
-
-			/* ... update hc-wide periodic stats (for usbfs) */
-			ehci_to_hcd(ehci)->self.bandwidth_int_reqs--;
-		}
+	if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) {
+		/* ... update hc-wide periodic stats */
+		ehci_to_hcd(ehci)->self.bandwidth_int_reqs--;
 	}
 
 	if (unlikely(urb->unlinked)) {
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1646,7 +1646,7 @@ static void itd_link_urb(
 
 	/* don't need that schedule data any more */
 	iso_sched_free (stream, iso_sched);
-	urb->hcpriv = NULL;
+	urb->hcpriv = stream;
 
 	++ehci->isoc_count;
 	enable_periodic(ehci);
@@ -2045,7 +2045,7 @@ static void sitd_link_urb(
 
 	/* don't need that schedule data any more */
 	iso_sched_free (stream, sched);
-	urb->hcpriv = NULL;
+	urb->hcpriv = stream;
 
 	++ehci->isoc_count;
 	enable_periodic(ehci);

[ 36/37] rcu: Fix batch-limit size problem

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

commit 878d7439d0f45a95869e417576774673d1fa243f upstream.

Commit 29c00b4a1d9e27 (rcu: Add event-tracing for RCU callback
invocation) added a regression in rcu_do_batch()

Under stress, RCU is supposed to allow to process all items in queue,
instead of a batch of 10 items (blimit), but an integer overflow makes
the effective limit being 1.  So, unless there is frequent idle periods
(during which RCU ignores batch limits), RCU can be forced into a
state where it cannot keep up with the callback-generation rate,
eventually resulting in OOM.

This commit therefore converts a few variables in rcu_do_batch() from
int to long to fix this problem, along with the module parameters
controlling the batch limits.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/rcutree.c |   17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -212,13 +212,13 @@ DEFINE_PER_CPU(struct rcu_dynticks, rcu_
 	.dynticks = ATOMIC_INIT(1),
 };
 
-static int blimit = 10;		/* Maximum callbacks per rcu_do_batch. */
-static int qhimark = 10000;	/* If this many pending, ignore blimit. */
-static int qlowmark = 100;	/* Once only this many pending, use blimit. */
-
-module_param(blimit, int, 0);
-module_param(qhimark, int, 0);
-module_param(qlowmark, int, 0);
+static long blimit = 10;	/* Maximum callbacks per rcu_do_batch. */
+static long qhimark = 10000;	/* If this many pending, ignore blimit. */
+static long qlowmark = 100;	/* Once only this many pending, use blimit. */
+
+module_param(blimit, long, 0);
+module_param(qhimark, long, 0);
+module_param(qlowmark, long, 0);
 
 int rcu_cpu_stall_suppress __read_mostly; /* 1 = suppress stall warnings. */
 int rcu_cpu_stall_timeout __read_mostly = CONFIG_RCU_CPU_STALL_TIMEOUT;
@@ -1543,7 +1543,8 @@ static void rcu_do_batch(struct rcu_stat
 {
 	unsigned long flags;
 	struct rcu_head *next, *list, **tail;
-	int bl, count, count_lazy, i;
+	long bl, count, count_lazy;
+	int i;
 
 	/* If no callbacks are ready, just return.*/
 	if (!cpu_has_callbacks_ready_to_invoke(rdp)) {

[ 37/37] PCI/PM: Fix deadlock when unbinding device if parent in D3cold

[Greg Kroah-Hartman]

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Huang Ying <ying.huang@intel.com>

commit 90b5c1d7c45eeb622302680ff96ed30c1a2b6f0e upstream.

If a PCI device and its parents are put into D3cold, unbinding the
device will trigger deadlock as follow:

- driver_unbind
  - device_release_driver
    - device_lock(dev)				<--- previous lock here
    - __device_release_driver
      - pm_runtime_get_sync
        ...
          - rpm_resume(dev)
            - rpm_resume(dev->parent)
              ...
                - pci_pm_runtime_resume
                  ...
                  - pci_set_power_state
                    - __pci_start_power_transition
                      - pci_wakeup_bus(dev->parent->subordinate)
                        - pci_walk_bus
                          - device_lock(dev)	<--- deadlock here


If we do not do device_lock in pci_walk_bus, we can avoid deadlock.
Device_lock in pci_walk_bus is introduced in commit:
d71374dafbba7ec3f67371d3b7e9f6310a588808, corresponding email thread
is: https://lkml.org/lkml/2006/5/26/38.  The patch author Zhang Yanmin
said device_lock is added to pci_walk_bus because:

  Some error handling functions call pci_walk_bus. For example, PCIe
  aer. Here we lock the device, so the driver wouldn't detach from the
  device, as the cb might call driver's callback function.

So I fixed the deadlock as follows:

- remove device_lock from pci_walk_bus
- add device_lock into callback if callback will call driver's callback

I checked pci_walk_bus users one by one, and found only PCIe aer needs
device lock.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
CC: stable@vger.kernel.org		# v3.6+
CC: Zhang Yanmin <yanmin.zhang@intel.com>


---
 arch/powerpc/platforms/pseries/eeh_driver.c |   35 ++++++++++++++++++++--------
 drivers/pci/bus.c                           |    3 --
 drivers/pci/pcie/aer/aerdrv_core.c          |   20 ++++++++++++----
 3 files changed, 41 insertions(+), 17 deletions(-)

--- a/arch/powerpc/platforms/pseries/eeh_driver.c
+++ b/arch/powerpc/platforms/pseries/eeh_driver.c
@@ -164,17 +164,18 @@ static int eeh_report_error(struct pci_d
 	enum pci_ers_result rc, *res = userdata;
 	struct pci_driver *driver;
 
+	device_lock(&dev->dev);
 	dev->error_state = pci_channel_io_frozen;
 
 	driver = eeh_pcid_get(dev);
-	if (!driver) return 0;
+	if (!driver) goto out;
 
 	eeh_disable_irq(dev);
 
 	if (!driver->err_handler ||
 	    !driver->err_handler->error_detected) {
 		eeh_pcid_put(dev);
-		return 0;
+		goto out;
 	}
 
 	rc = driver->err_handler->error_detected(dev, pci_channel_io_frozen);
@@ -184,6 +185,8 @@ static int eeh_report_error(struct pci_d
 	if (*res == PCI_ERS_RESULT_NONE) *res = rc;
 
 	eeh_pcid_put(dev);
+out:
+	device_unlock(&dev->dev);
 	return 0;
 }
 
@@ -201,13 +204,14 @@ static int eeh_report_mmio_enabled(struc
 	enum pci_ers_result rc, *res = userdata;
 	struct pci_driver *driver;
 
+	device_lock(&dev->dev);
 	driver = eeh_pcid_get(dev);
-	if (!driver) return 0;
+	if (!driver) goto out;
 
 	if (!driver->err_handler ||
 	    !driver->err_handler->mmio_enabled) {
 		eeh_pcid_put(dev);
-		return 0;
+		goto out;
 	}
 
 	rc = driver->err_handler->mmio_enabled(dev);
@@ -217,6 +221,8 @@ static int eeh_report_mmio_enabled(struc
 	if (*res == PCI_ERS_RESULT_NONE) *res = rc;
 
 	eeh_pcid_put(dev);
+out:
+	device_unlock(&dev->dev);
 	return 0;
 }
 
@@ -235,17 +241,18 @@ static int eeh_report_reset(struct pci_d
 	enum pci_ers_result rc, *res = userdata;
 	struct pci_driver *driver;
 
+	device_lock(&dev->dev);
 	dev->error_state = pci_channel_io_normal;
 
 	driver = eeh_pcid_get(dev);
-	if (!driver) return 0;
+	if (!driver) goto out;
 
 	eeh_enable_irq(dev);
 
 	if (!driver->err_handler ||
 	    !driver->err_handler->slot_reset) {
 		eeh_pcid_put(dev);
-		return 0;
+		goto out;
 	}
 
 	rc = driver->err_handler->slot_reset(dev);
@@ -255,6 +262,8 @@ static int eeh_report_reset(struct pci_d
 	     rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
 
 	eeh_pcid_put(dev);
+out:
+	device_unlock(&dev->dev);
 	return 0;
 }
 
@@ -271,22 +280,25 @@ static int eeh_report_resume(struct pci_
 {
 	struct pci_driver *driver;
 
+	device_lock(&dev->dev);
 	dev->error_state = pci_channel_io_normal;
 
 	driver = eeh_pcid_get(dev);
-	if (!driver) return 0;
+	if (!driver) goto out;
 
 	eeh_enable_irq(dev);
 
 	if (!driver->err_handler ||
 	    !driver->err_handler->resume) {
 		eeh_pcid_put(dev);
-		return 0;
+		goto out;
 	}
 
 	driver->err_handler->resume(dev);
 
 	eeh_pcid_put(dev);
+out:
+	device_unlock(&dev->dev);
 	return 0;
 }
 
@@ -302,22 +314,25 @@ static int eeh_report_failure(struct pci
 {
 	struct pci_driver *driver;
 
+	device_lock(&dev->dev);
 	dev->error_state = pci_channel_io_perm_failure;
 
 	driver = eeh_pcid_get(dev);
-	if (!driver) return 0;
+	if (!driver) goto out;
 
 	eeh_disable_irq(dev);
 
 	if (!driver->err_handler ||
 	    !driver->err_handler->error_detected) {
 		eeh_pcid_put(dev);
-		return 0;
+		goto out;
 	}
 
 	driver->err_handler->error_detected(dev, pci_channel_io_perm_failure);
 
 	eeh_pcid_put(dev);
+out:
+	device_unlock(&dev->dev);
 	return 0;
 }
 
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -316,10 +316,7 @@ void pci_walk_bus(struct pci_bus *top, i
 		} else
 			next = dev->bus_list.next;
 
-		/* Run device routines with the device locked */
-		device_lock(&dev->dev);
 		retval = cb(dev, userdata);
-		device_unlock(&dev->dev);
 		if (retval)
 			break;
 	}
--- a/drivers/pci/pcie/aer/aerdrv_core.c
+++ b/drivers/pci/pcie/aer/aerdrv_core.c
@@ -244,6 +244,7 @@ static int report_error_detected(struct
 	struct aer_broadcast_data *result_data;
 	result_data = (struct aer_broadcast_data *) data;
 
+	device_lock(&dev->dev);
 	dev->error_state = result_data->state;
 
 	if (!dev->driver ||
@@ -262,12 +263,14 @@ static int report_error_detected(struct
 				   dev->driver ?
 				   "no AER-aware driver" : "no driver");
 		}
-		return 0;
+		goto out;
 	}
 
 	err_handler = dev->driver->err_handler;
 	vote = err_handler->error_detected(dev, result_data->state);
 	result_data->result = merge_result(result_data->result, vote);
+out:
+	device_unlock(&dev->dev);
 	return 0;
 }
 
@@ -278,14 +281,17 @@ static int report_mmio_enabled(struct pc
 	struct aer_broadcast_data *result_data;
 	result_data = (struct aer_broadcast_data *) data;
 
+	device_lock(&dev->dev);
 	if (!dev->driver ||
 		!dev->driver->err_handler ||
 		!dev->driver->err_handler->mmio_enabled)
-		return 0;
+		goto out;
 
 	err_handler = dev->driver->err_handler;
 	vote = err_handler->mmio_enabled(dev);
 	result_data->result = merge_result(result_data->result, vote);
+out:
+	device_unlock(&dev->dev);
 	return 0;
 }
 
@@ -296,14 +302,17 @@ static int report_slot_reset(struct pci_
 	struct aer_broadcast_data *result_data;
 	result_data = (struct aer_broadcast_data *) data;
 
+	device_lock(&dev->dev);
 	if (!dev->driver ||
 		!dev->driver->err_handler ||
 		!dev->driver->err_handler->slot_reset)
-		return 0;
+		goto out;
 
 	err_handler = dev->driver->err_handler;
 	vote = err_handler->slot_reset(dev);
 	result_data->result = merge_result(result_data->result, vote);
+out:
+	device_unlock(&dev->dev);
 	return 0;
 }
 
@@ -311,15 +320,18 @@ static int report_resume(struct pci_dev
 {
 	struct pci_error_handlers *err_handler;
 
+	device_lock(&dev->dev);
 	dev->error_state = pci_channel_io_normal;
 
 	if (!dev->driver ||
 		!dev->driver->err_handler ||
 		!dev->driver->err_handler->resume)
-		return 0;
+		goto out;
 
 	err_handler = dev->driver->err_handler;
 	err_handler->resume(dev);
+out:
+	device_unlock(&dev->dev);
 	return 0;
 }
 

Re: [ 00/37] 3.6.11-stable review

[Shuah Khan]

On Fri, Dec 14, 2012 at 4:00 PM, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
> Note: This is going to be the last 3.6.y kernel release, unless
> something major comes up, everyone should be moving to the 3.7.y kernel
> at this point in time.
>
> This is the start of the stable review cycle for the 3.6.11 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Dec 16 22:16:49 UTC 2012.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.6.11-rc1.gz
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Patches applied cleanly to 3.0.y, 3.4.y, 3.6.y, and 3.7.y.
Compiled and booted on the following systems:
HP EliteBook 6930p Intel(R) Core(TM)2 Duo CPU     T9400  @ 2.53GHz
HP ProBook 6475b AMD A10-4600M APU with Radeon(tm) HD Graphics

I started cross-compile tests and will report the status.

-- Shuah

Re: [ 00/37] 3.6.11-stable review

[Satoru Takeuchi]

At Fri, 14 Dec 2012 15:00:37 -0800,
Greg Kroah-Hartman wrote:
> 
> Note: This is going to be the last 3.6.y kernel release, unless
> something major comes up, everyone should be moving to the 3.7.y kernel
> at this point in time.
> 
> This is the start of the stable review cycle for the 3.6.11 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun Dec 16 22:16:49 UTC 2012.
> Anything received after that time might be too late.

This kernel can be built and boot without any problem.
Building a kernel with this kernel also works fine.

 - Build Machine: debian wheezy x86_64
   CPU: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz x 4
   memory: 8GB

 - Test machine: debian wheezy x86_64(KVM guest on the Build Machine)
   vCPU: x2
   memory: 2GB

I reviewed the following patches and it looks good to me.

> Zheng Liu <gnehzuil.liu@gmail.com>
>     perf test: fix a build error on builtin-test
> 
> Steven Rostedt <srostedt@redhat.com>
>     ring-buffer: Fix race between integrity check and readers
> 
> Steven Rostedt <srostedt@redhat.com>
>     ring-buffer: Fix NULL pointer if rb_set_head_page() fails
> 
> Dan Carpenter <dan.carpenter@oracle.com>
>     ftrace: Clear bits properly in reset_iter_read()
> 
> Jan Beulich <JBeulich@suse.com>
>     x86: hpet: Fix masking of MSI interrupts
> 
> Marek Szyprowski <m.szyprowski@samsung.com>
>     mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls
> 
> Tejun Heo <tj@kernel.org>
>     workqueue: convert BUG_ON()s in __queue_delayed_work() to WARN_ON_ONCE()s
> 
> Mel Gorman <mgorman@suse.de>
>     tmpfs: fix shared mempolicy leak

Thanks,
Satoru

Re: [ 00/37] 3.6.11-stable review

[Shuah Khan]

On Sat, Dec 15, 2012 at 7:24 AM, Shuah Khan <shuahkhan@gmail.com> wrote:
> On Fri, Dec 14, 2012 at 4:00 PM, Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
>> Note: This is going to be the last 3.6.y kernel release, unless
>> something major comes up, everyone should be moving to the 3.7.y kernel
>> at this point in time.
>>
>> This is the start of the stable review cycle for the 3.6.11 release.
>> There are 37 patches in this series, all will be posted as a response
>> to this one.  If anyone has any issues with these being applied, please
>> let me know.
>>
>> Responses should be made by Sun Dec 16 22:16:49 UTC 2012.
>> Anything received after that time might be too late.
>>
>> The whole patch series can be found in one patch at:
>>         kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.6.11-rc1.gz
>> and the diffstat can be found below.
>>
>> thanks,
>>
>> greg k-h
>
> Patches applied cleanly to 3.0.y, 3.4.y, 3.6.y, and 3.7.y.
> Compiled and booted on the following systems:
> HP EliteBook 6930p Intel(R) Core(TM)2 Duo CPU     T9400  @ 2.53GHz
> HP ProBook 6475b AMD A10-4600M APU with Radeon(tm) HD Graphics
>
> I started cross-compile tests and will report the status.
>
> -- Shuah

Cross-compile tests:
alpha: defconfig passed on all
arm: defconfig passed on all
c6x: not applicable to 3.0.y, defconfig passed on the rest three
mips: defconfig passed on all
mipsel: defconfig passed on all
powerpc: wii_defconfig failed on 3.0.y (known issue), passed on the rest three
sh: defconfig passed on all
sparc: defconfig passed on all
tile: tilegx_defconfig passed on all

-- Shuah