From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
alan@lxorguk.ukuu.org.uk,
Muhammad Minhazul Haque <mdminhazulhaque@gmail.com>,
Kevin McKinney <klmckinney1@gmail.com>
Subject: [ 27/27] Staging: bcm: Add two products and remove an existing product.
Date: Fri, 14 Dec 2012 15:01:40 -0800 [thread overview]
Message-ID: <20121214222256.895948215@linuxfoundation.org> (raw)
In-Reply-To: <20121214222251.229078963@linuxfoundation.org>
3.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kevin McKinney <klmckinney1@gmail.com>
commit 4f29ef050848245f7c180b95ccf67dfcd76b1fd8 upstream.
This patch adds two new products and modifies
the device id table to include them. In addition,
product of 0xbccd - BCM_USB_PRODUCT_ID_SM250 is
removed because Beceem, ZTE, Sprint use this id
for block devices.
Reported-by: Muhammad Minhazul Haque <mdminhazulhaque@gmail.com>
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/staging/bcm/InterfaceInit.c | 3 ++-
drivers/staging/bcm/InterfaceInit.h | 2 +-
2 files changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/staging/bcm/InterfaceInit.c
+++ b/drivers/staging/bcm/InterfaceInit.c
@@ -4,11 +4,12 @@ static struct usb_device_id InterfaceUsb
{ USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_T3) },
{ USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_T3B) },
{ USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_T3L) },
- { USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_SM250) },
+ { USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_SYM) },
{ USB_DEVICE(BCM_USB_VENDOR_ID_ZTE, BCM_USB_PRODUCT_ID_226) },
{ USB_DEVICE(BCM_USB_VENDOR_ID_FOXCONN, BCM_USB_PRODUCT_ID_1901) },
{ USB_DEVICE(BCM_USB_VENDOR_ID_ZTE, BCM_USB_PRODUCT_ID_ZTE_TU25) },
{ USB_DEVICE(BCM_USB_VENDOR_ID_ZTE, BCM_USB_PRODUCT_ID_ZTE_226) },
+ { USB_DEVICE(BCM_USB_VENDOR_ID_ZTE, BCM_USB_PRODUCT_ID_ZTE_326) },
{ }
};
MODULE_DEVICE_TABLE(usb, InterfaceUsbtable);
--- a/drivers/staging/bcm/InterfaceInit.h
+++ b/drivers/staging/bcm/InterfaceInit.h
@@ -8,11 +8,11 @@
#define BCM_USB_PRODUCT_ID_T3 0x0300
#define BCM_USB_PRODUCT_ID_T3B 0x0210
#define BCM_USB_PRODUCT_ID_T3L 0x0220
-#define BCM_USB_PRODUCT_ID_SM250 0xbccd
#define BCM_USB_PRODUCT_ID_SYM 0x15E
#define BCM_USB_PRODUCT_ID_1901 0xe017
#define BCM_USB_PRODUCT_ID_226 0x0132 /* not sure if this is valid */
#define BCM_USB_PRODUCT_ID_ZTE_226 0x172
+#define BCM_USB_PRODUCT_ID_ZTE_326 0x173 /* ZTE AX326 */
#define BCM_USB_PRODUCT_ID_ZTE_TU25 0x0007
#define BCM_USB_MINOR_BASE 192
next prev parent reply other threads:[~2012-12-14 23:07 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-14 23:01 [ 00/27] 3.7.1-stable review Greg Kroah-Hartman
2012-12-14 23:01 ` [ 01/27] mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls Greg Kroah-Hartman
2012-12-14 23:01 ` [ 02/27] clk: ux500: fix bit error Greg Kroah-Hartman
2012-12-14 23:01 ` [ 03/27] x86,AMD: Power driver support for AMDs family 16h processors Greg Kroah-Hartman
2012-12-14 23:01 ` [ 04/27] telephony: ijx: buffer overflow in ixj_write_cid() Greg Kroah-Hartman
2012-12-14 23:01 ` [ 05/27] ezusb: add dependency to USB Greg Kroah-Hartman
2012-12-14 23:01 ` [ 06/27] x86: hpet: Fix masking of MSI interrupts Greg Kroah-Hartman
2012-12-14 23:01 ` [ 07/27] USB: add new zte 3g-dongles pid to option.c Greg Kroah-Hartman
2012-12-14 23:01 ` [ 08/27] USB: option: blacklist network interface on Huawei E173 Greg Kroah-Hartman
2012-12-14 23:01 ` [ 09/27] USB: ftdi_sio: Add support for Newport AGILIS motor drivers Greg Kroah-Hartman
2012-12-14 23:01 ` [ 10/27] usb: ftdi_sio: fixup BeagleBone A5+ quirk Greg Kroah-Hartman
2012-12-14 23:01 ` [ 11/27] USB: cp210x: add Virtenio Preon32 device id Greg Kroah-Hartman
2012-12-14 23:01 ` [ 12/27] USB: mark uas driver as BROKEN Greg Kroah-Hartman
2012-12-14 23:01 ` [ 13/27] ACPI / battery: Correct battery capacity values on Thinkpads Greg Kroah-Hartman
2012-12-14 23:01 ` [ 14/27] ACPI / PM: Add Sony Vaio VPCEB1S1E to nonvs blacklist Greg Kroah-Hartman
2012-12-14 23:01 ` [ 15/27] ACPI / PNP: Do not crash due to stale pointer use during system resume Greg Kroah-Hartman
2012-12-14 23:01 ` [ 16/27] ACPI / video: ignore BIOS initial backlight value for HP Folio 13-2000 Greg Kroah-Hartman
2012-12-14 23:01 ` [ 17/27] ACPI / video: Add "Asus UL30VT" to ACPI video detect blacklist Greg Kroah-Hartman
2012-12-14 23:01 ` [ 18/27] USB: OHCI: workaround for hardware bug: retired TDs not added to the Done Queue Greg Kroah-Hartman
2012-12-14 23:01 ` [ 19/27] xhci: Extend Fresco Logic MSI quirk Greg Kroah-Hartman
2012-12-14 23:01 ` [ 20/27] ftrace: Clear bits properly in reset_iter_read() Greg Kroah-Hartman
2012-12-14 23:01 ` [ 21/27] ring-buffer: Fix NULL pointer if rb_set_head_page() fails Greg Kroah-Hartman
2012-12-14 23:01 ` [ 22/27] ring-buffer: Fix race between integrity check and readers Greg Kroah-Hartman
2012-12-14 23:01 ` [ 23/27] cdc-acm: implement TIOCSSERIAL to avoid blocking close(2) Greg Kroah-Hartman
2012-12-14 23:01 ` [ 24/27] perf test: fix a build error on builtin-test Greg Kroah-Hartman
2012-12-14 23:01 ` [ 25/27] USB: EHCI: bugfix: urb->hcpriv should not be NULL Greg Kroah-Hartman
2012-12-14 23:01 ` [ 26/27] rcu: Fix batch-limit size problem Greg Kroah-Hartman
2012-12-14 23:01 ` Greg Kroah-Hartman [this message]
2012-12-15 14:22 ` [ 00/27] 3.7.1-stable review Shuah Khan
2012-12-15 20:47 ` Shuah Khan
2012-12-15 14:53 ` Satoru Takeuchi
2012-12-16 19:52 ` Nikola Ciprich
2012-12-17 22:07 ` Mariusz Kozlowski
2012-12-17 22:14 ` Greg Kroah-Hartman
2012-12-17 22:38 ` Mariusz Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121214222256.895948215@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=klmckinney1@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mdminhazulhaque@gmail.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).