From: Kurt Van Dijck <kurt.van.dijck@eia.be>
To: Fabio Baltieri <fabio.baltieri@gmail.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re: [PATCH 0/9] tx/rx LED trigger support
Date: Mon, 17 Dec 2012 10:35:16 +0100 [thread overview]
Message-ID: <20121217093516.GB17341@vandijck-laurijssen.be> (raw)
In-Reply-To: <1355656113-9562-1-git-send-email-fabio.baltieri@gmail.com>
Fabio,
Nice work to repackage this :-) !
Kurt
On Sun, Dec 16, 2012 at 12:08:24PM +0100, Fabio Baltieri wrote:
> Hi all,
>
> this is a resend of the patch series on tx/rx LEDs trigger. The patch
> set was put on hold after the latest discussions on Kurt's rename patch
> due to a missing feature in the LED subsystem, which has been just
> merged in:
>
> a8df7b1 leds: add led_trigger_rename function
>
> So, as months passed since the latest developments, I'm reposting the
> whole set, rebased on current mainline. The first patches are the same
> that were merged in can-next/led-trigger, but there was some (trivial)
> conflict in the rebase.
>
> As for the test, I've tried the patch on the current mainline kernel
> with my custom usb-can interface. For the drivers, I don't have any
> SoC-enabled board anymore, so they have only been compile tested.
>
> Cheers,
> Fabio
>
>
> Fabio Baltieri (7):
> can: add tx/rx LED trigger support
> can: flexcan: add LED trigger support
> can: at91_can: add LED trigger support
> can: ti_hecc: add LED trigger support
> can: c_can: add LED trigger support
> can: mcp251x: add LED trigger support
> can: sja1000: add LED trigger support
>
> Kurt Van Dijck (2):
> can: export a safe netdev_priv wrapper for candev
> can: rename LED trigger name on netdev renames
>
> drivers/net/can/Kconfig | 12 ++++
> drivers/net/can/Makefile | 2 +
> drivers/net/can/at91_can.c | 10 +++
> drivers/net/can/c_can/c_can.c | 10 +++
> drivers/net/can/dev.c | 18 ++++++
> drivers/net/can/flexcan.c | 11 ++++
> drivers/net/can/led.c | 129 ++++++++++++++++++++++++++++++++++++++
> drivers/net/can/mcp251x.c | 23 +++++--
> drivers/net/can/sja1000/sja1000.c | 17 ++++-
> drivers/net/can/ti_hecc.c | 10 +++
> include/linux/can/dev.h | 11 ++++
> include/linux/can/led.h | 51 +++++++++++++++
> 12 files changed, 299 insertions(+), 5 deletions(-)
> create mode 100644 drivers/net/can/led.c
> create mode 100644 include/linux/can/led.h
>
> --
> 1.7.12.1
>
prev parent reply other threads:[~2012-12-17 9:35 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-16 11:08 [PATCH 0/9] tx/rx LED trigger support Fabio Baltieri
2012-12-16 11:08 ` [PATCH 1/9] can: add " Fabio Baltieri
2012-12-17 7:28 ` Bernd Krumboeck
2012-12-17 9:34 ` Kurt Van Dijck
2012-12-17 17:41 ` Fabio Baltieri
2012-12-17 20:20 ` "Bernd Krumböck"
2012-12-17 21:42 ` Fabio Baltieri
2012-12-18 6:02 ` "Bernd Krumböck"
2012-12-16 11:08 ` [PATCH 2/9] can: flexcan: add " Fabio Baltieri
2012-12-16 11:08 ` [PATCH 3/9] can: at91_can: " Fabio Baltieri
2012-12-16 11:08 ` [PATCH 4/9] can: ti_hecc: " Fabio Baltieri
2012-12-16 11:08 ` [PATCH 5/9] can: c_can: " Fabio Baltieri
2012-12-16 11:08 ` [PATCH 6/9] can: mcp251x: " Fabio Baltieri
2012-12-16 11:08 ` [PATCH 7/9] can: sja1000: " Fabio Baltieri
2012-12-16 11:08 ` [PATCH 8/9] can: export a safe netdev_priv wrapper for candev Fabio Baltieri
2012-12-16 11:08 ` [PATCH 9/9] can: rename LED trigger name on netdev renames Fabio Baltieri
2012-12-16 22:37 ` [PATCH 0/9] tx/rx LED trigger support Marc Kleine-Budde
2012-12-16 22:51 ` Fabio Baltieri
2012-12-17 9:35 ` Kurt Van Dijck [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121217093516.GB17341@vandijck-laurijssen.be \
--to=kurt.van.dijck@eia.be \
--cc=fabio.baltieri@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).