linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Minchan Kim <minchan@kernel.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matt Sealey <matt@genesi-usa.com>,
	linux-mm@kvack.org, linux-kernel@vger.kernel.org,
	stable@vger.kernel.org,
	Dan Magenheimer <dan.magenheimer@oracle.com>,
	Russell King <linux@arm.linux.org.uk>,
	Konrad Rzeszutek Wilk <konrad@darnok.org>,
	Nitin Gupta <ngupta@vflare.org>,
	Seth Jennings <sjenning@linux.vnet.ibm.com>
Subject: Re: [PATCH] zsmalloc: Fix TLB coherency and build problem
Date: Wed, 30 Jan 2013 11:48:05 +0900	[thread overview]
Message-ID: <20130130024805.GB2580@blaptop> (raw)
In-Reply-To: <1359334808-19794-1-git-send-email-minchan@kernel.org>

Ping

On Mon, Jan 28, 2013 at 10:00:08AM +0900, Minchan Kim wrote:
> Recently, Matt Sealey reported he fail to build zsmalloc caused by
> using of local_flush_tlb_kernel_range which are architecture dependent
> function so !CONFIG_SMP in ARM couldn't implement it so it ends up
> build error following as.
> 
>   MODPOST 216 modules
>   LZMA    arch/arm/boot/compressed/piggy.lzma
>   AS      arch/arm/boot/compressed/lib1funcs.o
> ERROR: "v7wbi_flush_kern_tlb_range"
> [drivers/staging/zsmalloc/zsmalloc.ko] undefined!
> make[1]: *** [__modpost] Error 1
> make: *** [modules] Error 2
> make: *** Waiting for unfinished jobs....
> 
> The reason we used that function is copy method by [1]
> was really slow in ARM but at that time.
> 
> More severe problem is ARM can prefetch speculatively on other CPUs
> so under us, other TLBs can have an entry only if we do flush local
> CPU. Russell King pointed that. Thanks!
> We don't have many choices except using flush_tlb_kernel_range.
> 
> My experiment in ARMv7 processor 4 core didn't make any difference with
> zsmapbench[2] between local_flush_tlb_kernel_range and flush_tlb_kernel_range
> but still page-table based is much better than copy-based.
> 
> * bigger is better.
> 
> 1. local_flush_tlb_kernel_range: 3918795 mappings
> 2. flush_tlb_kernel_range : 3989538 mappings
> 3. copy-based: 635158 mappings
> 
> This patch replace local_flush_tlb_kernel_range with
> flush_tlb_kernel_range which are avaialbe in all architectures
> because we already have used it in vmalloc allocator which are
> generic one so build problem should go away and performane loss
> shoud be void.
> 
> [1] f553646, zsmalloc: add page table mapping method
> [2] https://github.com/spartacus06/zsmapbench
> 
> Cc: stable@vger.kernel.org
> Cc: Dan Magenheimer <dan.magenheimer@oracle.com>
> Cc: Russell King <linux@arm.linux.org.uk>
> Cc: Konrad Rzeszutek Wilk <konrad@darnok.org>
> Cc: Nitin Gupta <ngupta@vflare.org>
> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com>
> Reported-by: Matt Sealey <matt@genesi-usa.com>
> Signed-off-by: Minchan Kim <minchan@kernel.org>
> ---
> 
> Matt, Could you test this patch?
> 
>  drivers/staging/zsmalloc/zsmalloc-main.c |   10 ++++------
>  1 file changed, 4 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/staging/zsmalloc/zsmalloc-main.c b/drivers/staging/zsmalloc/zsmalloc-main.c
> index eb00772..82e627c 100644
> --- a/drivers/staging/zsmalloc/zsmalloc-main.c
> +++ b/drivers/staging/zsmalloc/zsmalloc-main.c
> @@ -222,11 +222,9 @@ struct zs_pool {
>  /*
>   * By default, zsmalloc uses a copy-based object mapping method to access
>   * allocations that span two pages. However, if a particular architecture
> - * 1) Implements local_flush_tlb_kernel_range() and 2) Performs VM mapping
> - * faster than copying, then it should be added here so that
> - * USE_PGTABLE_MAPPING is defined. This causes zsmalloc to use page table
> - * mapping rather than copying
> - * for object mapping.
> + * performs VM mapping faster than copying, then it should be added here
> + * so that USE_PGTABLE_MAPPING is defined. This causes zsmalloc to use
> + * page table mapping rather than copying for object mapping.
>  */
>  #if defined(CONFIG_ARM)
>  #define USE_PGTABLE_MAPPING
> @@ -663,7 +661,7 @@ static inline void __zs_unmap_object(struct mapping_area *area,
>  
>  	flush_cache_vunmap(addr, end);
>  	unmap_kernel_range_noflush(addr, PAGE_SIZE * 2);
> -	local_flush_tlb_kernel_range(addr, end);
> +	flush_tlb_kernel_range(addr, end);
>  }
>  
>  #else /* USE_PGTABLE_MAPPING */
> -- 
> 1.7.9.5
> 
> --
> To unsubscribe, send a message with 'unsubscribe linux-mm' in
> the body to majordomo@kvack.org.  For more info on Linux MM,
> see: http://www.linux-mm.org/ .
> Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

-- 
Kind regards,
Minchan Kim

  reply	other threads:[~2013-01-30  2:48 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-28  1:00 [PATCH] zsmalloc: Fix TLB coherency and build problem Minchan Kim
2013-01-30  2:48 ` Minchan Kim [this message]
2013-02-01 13:02 ` Konrad Rzeszutek Wilk
2013-02-01 14:02 ` Russell King - ARM Linux
2013-02-03 23:50   ` Minchan Kim
2013-02-19 10:07 ` Simon Jeons
2013-02-19 23:45   ` Minchan Kim

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130130024805.GB2580@blaptop \
    --to=minchan@kernel.org \
    --cc=dan.magenheimer@oracle.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=konrad@darnok.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linux@arm.linux.org.uk \
    --cc=matt@genesi-usa.com \
    --cc=ngupta@vflare.org \
    --cc=sjenning@linux.vnet.ibm.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).