LKML Archive on
 help / color / Atom feed
From: Francois Romieu <>
To: David R <>
Cc: Linux Kernel Mailing List <>,
Subject: Re: AMD Vi error and lost networking with r8169
Date: Sun, 7 Apr 2013 23:53:03 +0200
Message-ID: <> (raw)
In-Reply-To: <>

David R <> :
> I'm been seeing some problems with my new ish AMD motherboard/processor
> combo and networking (r8169). I see the following page fault :-
> Apr  7 12:25:14 david kernel: [156421.436545] AMD-Vi: Event logged
> [IO_PAGE_FAULT device=02:00.0 domain=0x0015 address=0x0000000000003000
> flags=0x0050]

Can you give the hack below a try ?

diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 28fb50a..ed8625d 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -4125,6 +4125,8 @@ static void rtl_init_rxcfg(struct rtl8169_private *tp)
 	case RTL_GIGA_MAC_VER_23:
 	case RTL_GIGA_MAC_VER_24:
 	case RTL_GIGA_MAC_VER_34:
+	case RTL_GIGA_MAC_VER_35:
+	case RTL_GIGA_MAC_VER_36:
 		RTL_W32(RxConfig, RX128_INT_EN | RX_MULTI_EN | RX_DMA_BURST);

  reply index

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-04-07 12:29 David R
2013-04-07 21:53 ` Francois Romieu [this message]
2013-04-08  6:14   ` David R
2013-04-10 19:57   ` David R

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on

Archives are clonable:
	git clone --mirror lkml/git/0.git
	git clone --mirror lkml/git/1.git
	git clone --mirror lkml/git/2.git
	git clone --mirror lkml/git/3.git
	git clone --mirror lkml/git/4.git
	git clone --mirror lkml/git/5.git
	git clone --mirror lkml/git/6.git
	git clone --mirror lkml/git/7.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ \
	public-inbox-index lkml

Newsgroup available over NNTP:

AGPL code for this site: git clone public-inbox