linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <greg@kroah.com>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	stable@vger.kernel.org,
	"Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>,
	Robin Holt <holt@sgi.com>, "H. Peter Anvin" <hpa@zytor.com>,
	Thomas Gleixner <tglx@linutronix.de>, Ingo Molnar <mingo@elte.hu>,
	Russ Anderson <rja@sgi.com>,
	Russell King <linux@arm.linux.org.uk>,
	Guan Xuetao <gxt@mprc.pku.edu.cn>,
	Shawn Guo <shawn.guo@linaro.org>,
	Andrew Morton <akpm@linux-foundation.org>,
	Linus Torvalds <torvalds@linux-foundation.org>
Subject: [ 17/48] CPU hotplug: provide a generic helper to disable/enable CPU hotplug
Date: Tue, 18 Jun 2013 09:17:43 -0700	[thread overview]
Message-ID: <20130618161728.384381457@linuxfoundation.org> (raw)
In-Reply-To: <20130618161725.912524266@linuxfoundation.org>

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

3.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>

commit 16e53dbf10a2d7e228709a7286310e629ede5e45 upstream.

There are instances in the kernel where we would like to disable CPU
hotplug (from sysfs) during some important operation.  Today the freezer
code depends on this and the code to do it was kinda tailor-made for
that.

Restructure the code and make it generic enough to be useful for other
usecases too.

Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Russ Anderson <rja@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/cpu.h |    4 +++
 kernel/cpu.c        |   55 +++++++++++++++++++++-------------------------------
 2 files changed, 27 insertions(+), 32 deletions(-)

--- a/include/linux/cpu.h
+++ b/include/linux/cpu.h
@@ -175,6 +175,8 @@ extern struct bus_type cpu_subsys;
 
 extern void get_online_cpus(void);
 extern void put_online_cpus(void);
+extern void cpu_hotplug_disable(void);
+extern void cpu_hotplug_enable(void);
 #define hotcpu_notifier(fn, pri)	cpu_notifier(fn, pri)
 #define register_hotcpu_notifier(nb)	register_cpu_notifier(nb)
 #define unregister_hotcpu_notifier(nb)	unregister_cpu_notifier(nb)
@@ -198,6 +200,8 @@ static inline void cpu_hotplug_driver_un
 
 #define get_online_cpus()	do { } while (0)
 #define put_online_cpus()	do { } while (0)
+#define cpu_hotplug_disable()	do { } while (0)
+#define cpu_hotplug_enable()	do { } while (0)
 #define hotcpu_notifier(fn, pri)	do { (void)(fn); } while (0)
 /* These aren't inline functions due to a GCC bug. */
 #define register_hotcpu_notifier(nb)	({ (void)(nb); 0; })
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -133,6 +133,27 @@ static void cpu_hotplug_done(void)
 	mutex_unlock(&cpu_hotplug.lock);
 }
 
+/*
+ * Wait for currently running CPU hotplug operations to complete (if any) and
+ * disable future CPU hotplug (from sysfs). The 'cpu_add_remove_lock' protects
+ * the 'cpu_hotplug_disabled' flag. The same lock is also acquired by the
+ * hotplug path before performing hotplug operations. So acquiring that lock
+ * guarantees mutual exclusion from any currently running hotplug operations.
+ */
+void cpu_hotplug_disable(void)
+{
+	cpu_maps_update_begin();
+	cpu_hotplug_disabled = 1;
+	cpu_maps_update_done();
+}
+
+void cpu_hotplug_enable(void)
+{
+	cpu_maps_update_begin();
+	cpu_hotplug_disabled = 0;
+	cpu_maps_update_done();
+}
+
 #else /* #if CONFIG_HOTPLUG_CPU */
 static void cpu_hotplug_begin(void) {}
 static void cpu_hotplug_done(void) {}
@@ -541,36 +562,6 @@ static int __init alloc_frozen_cpus(void
 core_initcall(alloc_frozen_cpus);
 
 /*
- * Prevent regular CPU hotplug from racing with the freezer, by disabling CPU
- * hotplug when tasks are about to be frozen. Also, don't allow the freezer
- * to continue until any currently running CPU hotplug operation gets
- * completed.
- * To modify the 'cpu_hotplug_disabled' flag, we need to acquire the
- * 'cpu_add_remove_lock'. And this same lock is also taken by the regular
- * CPU hotplug path and released only after it is complete. Thus, we
- * (and hence the freezer) will block here until any currently running CPU
- * hotplug operation gets completed.
- */
-void cpu_hotplug_disable_before_freeze(void)
-{
-	cpu_maps_update_begin();
-	cpu_hotplug_disabled = 1;
-	cpu_maps_update_done();
-}
-
-
-/*
- * When tasks have been thawed, re-enable regular CPU hotplug (which had been
- * disabled while beginning to freeze tasks).
- */
-void cpu_hotplug_enable_after_thaw(void)
-{
-	cpu_maps_update_begin();
-	cpu_hotplug_disabled = 0;
-	cpu_maps_update_done();
-}
-
-/*
  * When callbacks for CPU hotplug notifications are being executed, we must
  * ensure that the state of the system with respect to the tasks being frozen
  * or not, as reported by the notification, remains unchanged *throughout the
@@ -589,12 +580,12 @@ cpu_hotplug_pm_callback(struct notifier_
 
 	case PM_SUSPEND_PREPARE:
 	case PM_HIBERNATION_PREPARE:
-		cpu_hotplug_disable_before_freeze();
+		cpu_hotplug_disable();
 		break;
 
 	case PM_POST_SUSPEND:
 	case PM_POST_HIBERNATION:
-		cpu_hotplug_enable_after_thaw();
+		cpu_hotplug_enable();
 		break;
 
 	default:



  parent reply	other threads:[~2013-06-18 16:17 UTC|newest]

Thread overview: 67+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-18 16:17 [ 00/48] 3.9.7-stable review Greg Kroah-Hartman
2013-06-18 16:17 ` [ 01/48] audit: wait_for_auditd() should use TASK_UNINTERRUPTIBLE Greg Kroah-Hartman
2013-06-18 16:17 ` [ 02/48] b43: stop format string leaking into error msgs Greg Kroah-Hartman
2013-06-18 16:17 ` [ 03/48] ACPI / video: Do not bind to device objects with a scan handler Greg Kroah-Hartman
2013-06-18 16:17 ` [ 04/48] libceph: must hold mutex for reset_changed_osds() Greg Kroah-Hartman
2013-06-18 16:17 ` [ 05/48] ceph: add cpu_to_le32() calls when encoding a reconnect capability Greg Kroah-Hartman
2013-06-18 16:17 ` [ 06/48] ceph: ceph_pagelist_append might sleep while atomic Greg Kroah-Hartman
2013-06-18 16:17 ` [ 07/48] rbd: dont destroy ceph_opts in rbd_add() Greg Kroah-Hartman
2013-06-18 16:17 ` [ 08/48] drivers/rtc/rtc-twl.c: fix missing device_init_wakeup() when booted with device tree Greg Kroah-Hartman
2013-06-18 16:17 ` [ 09/48] drm/gma500/psb: Unpin framebuffer on crtc disable Greg Kroah-Hartman
2013-06-18 16:17 ` [ 10/48] drm/gma500/cdv: " Greg Kroah-Hartman
2013-06-18 16:17 ` [ 11/48] Bluetooth: Fix missing length checks for L2CAP signalling PDUs Greg Kroah-Hartman
2013-06-18 16:17 ` [ 12/48] Bluetooth: Fix mgmt handling of power on failures Greg Kroah-Hartman
2013-06-18 16:17 ` [ 13/48] s390/pci: Implement IRQ functions if !PCI Greg Kroah-Hartman
2013-06-18 17:35   ` Ben Hutchings
2013-06-18 17:42     ` Greg Kroah-Hartman
2013-06-18 21:35       ` Ben Hutchings
2013-06-19  7:09     ` Martin Schwidefsky
2013-06-20 19:21     ` Greg Kroah-Hartman
2013-06-18 16:17 ` [ 14/48] ath9k: Disable PowerSave by default Greg Kroah-Hartman
2013-06-18 16:17 ` [ 15/48] Revert "ath9k_hw: Update rx gain initval to improve rx sensitivity" Greg Kroah-Hartman
2013-06-18 16:17 ` [ 16/48] ath9k: Use minstrel rate control by default Greg Kroah-Hartman
2013-06-18 16:17 ` Greg Kroah-Hartman [this message]
2013-06-18 16:17 ` [ 18/48] reboot: rigrate shutdown/reboot to boot cpu Greg Kroah-Hartman
2013-06-18 16:17 ` [ 19/48] kmsg: honor dmesg_restrict sysctl on /dev/kmsg Greg Kroah-Hartman
2013-06-18 16:17 ` [ 20/48] cciss: fix broken mutex usage in ioctl Greg Kroah-Hartman
2013-06-18 16:17 ` [ 21/48] memcg: dont initialize kmem-cache destroying work for root caches Greg Kroah-Hartman
2013-06-18 16:17 ` [ 22/48] wl12xx: fix minimum required firmware version for wl127x multirole Greg Kroah-Hartman
2013-06-18 16:17 ` [ 23/48] drm/i915: prefer VBT modes for SVDO-LVDS over EDID Greg Kroah-Hartman
2013-06-18 16:17 ` [ 24/48] swap: avoid read_swap_cache_async() race to deadlock while waiting on discard I/O completion Greg Kroah-Hartman
2013-06-18 16:17 ` [ 25/48] md/raid1: consider WRITE as successful only if at least one non-Faulty and non-rebuilding drive completed it Greg Kroah-Hartman
2013-06-18 16:17 ` [ 26/48] md/raid1,5,10: Disable WRITE SAME until a recovery strategy is in place Greg Kroah-Hartman
2013-06-18 16:17 ` [ 27/48] md/raid1,raid10: use freeze_array in place of raise_barrier in various places Greg Kroah-Hartman
2013-06-18 16:17 ` [ 28/48] mm/page_alloc.c: fix watermark check in __zone_watermark_ok() Greg Kroah-Hartman
2013-06-18 16:17 ` [ 29/48] mm: migration: add migrate_entry_wait_huge() Greg Kroah-Hartman
2013-06-20  9:52   ` Satoru Takeuchi
2013-06-20 17:02     ` Greg Kroah-Hartman
2013-06-21 11:42       ` Satoru Takeuchi
2013-06-21 12:47     ` Michal Hocko
2013-06-21 22:56       ` Satoru Takeuchi
2013-06-22 12:28         ` Satoru Takeuchi
2013-06-27 18:48     ` Naoya Horiguchi
2013-06-18 16:17 ` [ 30/48] x86: Fix adjust_range_size_mask calling position Greg Kroah-Hartman
2013-06-18 16:17 ` [ 31/48] x86: Fix typo in kexec register clearing Greg Kroah-Hartman
2013-06-18 16:17 ` [ 32/48] drm/nv50/disp: force dac power state during load detect Greg Kroah-Hartman
2013-06-18 16:17 ` [ 33/48] drm/nv50/kms: use dac loadval from vbios, where its available Greg Kroah-Hartman
2013-06-18 16:18 ` [ 34/48] libceph: clear messenger auth_retry flag when we authenticate Greg Kroah-Hartman
2013-06-18 16:18 ` [ 35/48] libceph: fix authorizer invalidation Greg Kroah-Hartman
2013-06-18 16:18 ` [ 36/48] libceph: add update_authorizer auth method Greg Kroah-Hartman
2013-06-18 16:18 ` [ 37/48] libceph: wrap auth ops in wrapper functions Greg Kroah-Hartman
2013-06-18 16:18 ` [ 38/48] libceph: wrap auth methods in a mutex Greg Kroah-Hartman
2013-06-18 16:18 ` [ 39/48] Modify UEFI anti-bricking code Greg Kroah-Hartman
2013-06-18 16:18 ` [ 40/48] powerpc: Fix stack overflow crash in resume_kernel when ftracing Greg Kroah-Hartman
2013-06-18 16:18 ` [ 41/48] powerpc: Fix emulation of illegal instructions on PowerNV platform Greg Kroah-Hartman
2013-06-18 16:18 ` [ 42/48] powerpc: Fix missing/delayed calls to irq_work Greg Kroah-Hartman
2013-06-18 16:18 ` [ 43/48] usb: chipidea: fix id change handling Greg Kroah-Hartman
2013-06-18 16:18 ` [ 44/48] USB: pl2303: fix device initialisation at open Greg Kroah-Hartman
2013-06-18 16:18 ` [ 45/48] USB: f81232: " Greg Kroah-Hartman
2013-06-18 16:18 ` [ 46/48] USB: spcp8x5: " Greg Kroah-Hartman
2013-06-18 16:18 ` [ 47/48] tg3: Wait for boot code to finish after power on Greg Kroah-Hartman
2013-06-18 16:18 ` [ 48/48] ARM: Kirkwood: handle mv88f6282 cpu in __kirkwood_variant() Greg Kroah-Hartman
2013-06-18 21:55 ` [ 00/48] 3.9.7-stable review Shuah Khan
2013-06-18 22:11   ` Greg Kroah-Hartman
2013-06-18 22:58 ` Guenter Roeck
2013-06-18 23:26   ` Greg Kroah-Hartman
2013-06-20 10:02 ` Satoru Takeuchi
2013-06-20 17:01   ` Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130618161728.384381457@linuxfoundation.org \
    --to=greg@kroah.com \
    --cc=akpm@linux-foundation.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=gxt@mprc.pku.edu.cn \
    --cc=holt@sgi.com \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=mingo@elte.hu \
    --cc=rja@sgi.com \
    --cc=shawn.guo@linaro.org \
    --cc=srivatsa.bhat@linux.vnet.ibm.com \
    --cc=stable@vger.kernel.org \
    --cc=tglx@linutronix.de \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).