linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
To: benh@kernel.crashing.org, linuxppc-dev@lists.ozlabs.org,
	linux-kernel@vger.kernel.org
Cc: daniel.lezcano@linaro.org, michael@ellerman.id.au,
	scottwood@freescale.com, srivatsa.bhat@linux.vnet.ibm.com,
	preeti@linux.vnet.ibm.com, linux-pm@lists.linux-foundation.org,
	svaidy@linux.vnet.ibm.com
Subject: [PATCH V7 6/7] POWER/cpuidle: Enable powernv cpuidle support.
Date: Tue, 29 Oct 2013 16:31:56 +0530	[thread overview]
Message-ID: <20131029110154.31547.94129.stgit@deepthi.in.ibm.com> (raw)
In-Reply-To: <20131029110052.31547.82682.stgit@deepthi.in.ibm.com>

The following patch extends the current power backend
idle driver to the powernv platform.

Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
---
 drivers/cpuidle/cpuidle-ibm-power.c |   39 ++++++++++++++++++++++++++++++++---
 1 file changed, 36 insertions(+), 3 deletions(-)

diff --git a/drivers/cpuidle/cpuidle-ibm-power.c b/drivers/cpuidle/cpuidle-ibm-power.c
index 5b92242..f790ea2 100644
--- a/drivers/cpuidle/cpuidle-ibm-power.c
+++ b/drivers/cpuidle/cpuidle-ibm-power.c
@@ -52,9 +52,10 @@ static int snooze_loop(struct cpuidle_device *dev,
 			struct cpuidle_driver *drv,
 			int index)
 {
-	unsigned long in_purr;
+	unsigned long in_purr = 0;
 
-	idle_loop_prolog(&in_purr);
+	if (firmware_has_feature(FW_FEATURE_SPLPAR))
+		idle_loop_prolog(&in_purr);
 	local_irq_enable();
 	set_thread_flag(TIF_POLLING_NRFLAG);
 
@@ -68,7 +69,8 @@ static int snooze_loop(struct cpuidle_device *dev,
 	clear_thread_flag(TIF_POLLING_NRFLAG);
 	smp_mb();
 
-	idle_loop_epilog(in_purr);
+	if (firmware_has_feature(FW_FEATURE_SPLPAR))
+		idle_loop_epilog(in_purr);
 
 	return index;
 }
@@ -132,6 +134,15 @@ static int shared_cede_loop(struct cpuidle_device *dev,
 	return index;
 }
 
+static int nap_loop(struct cpuidle_device *dev,
+			struct cpuidle_driver *drv,
+			int index)
+{
+	ppc64_runlatch_off();
+	power7_idle();
+	return index;
+}
+
 /*
  * States for dedicated partition case.
  */
@@ -165,6 +176,23 @@ static struct cpuidle_state shared_states[] = {
 		.enter = &shared_cede_loop },
 };
 
+static struct cpuidle_state powernv_states[] = {
+	{ /* Snooze */
+		.name = "snooze",
+		.desc = "snooze",
+		.flags = CPUIDLE_FLAG_TIME_VALID,
+		.exit_latency = 0,
+		.target_residency = 0,
+		.enter = &snooze_loop },
+	{ /* NAP */
+		.name = "NAP",
+		.desc = "NAP",
+		.flags = CPUIDLE_FLAG_TIME_VALID,
+		.exit_latency = 10,
+		.target_residency = 100,
+		.enter = &nap_loop },
+};
+
 void update_smt_snooze_delay(int cpu, int residency)
 {
 	struct cpuidle_driver *drv = cpuidle_get_driver();
@@ -258,6 +286,11 @@ static int power_idle_probe(void)
 			cpuidle_state_table = dedicated_states;
 			max_idle_state = ARRAY_SIZE(dedicated_states);
 		}
+
+	} else if (firmware_has_feature(FW_FEATURE_OPALv3)) {
+		cpuidle_state_table = powernv_states;
+		max_idle_state = ARRAY_SIZE(powernv_states);
+
 	} else
 		return -ENODEV;
 


  parent reply	other threads:[~2013-10-29 11:02 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-10-29 11:01 [PATCH V7 0/7] POWER/cpuidle: Generic IBM-POWER cpuidle driver enabled for PSERIES and POWERNV platforms Deepthi Dharwar
2013-10-29 11:01 ` [PATCH V7 1/7] pseries/cpuidle: Move processor_idle.c to drivers/cpuidle Deepthi Dharwar
2013-11-06 20:58   ` Daniel Lezcano
2013-10-29 11:01 ` [PATCH V7 2/7] pseries/cpuidle: Use cpuidle_register() for initialisation Deepthi Dharwar
2013-11-06 21:00   ` Daniel Lezcano
2013-10-29 11:01 ` [PATCH V7 3/7] pseries/cpuidle: Make pseries_idle backend driver a non-module Deepthi Dharwar
2013-11-06 21:01   ` Daniel Lezcano
2013-10-29 11:01 ` [PATCH V7 4/7] pseries/cpuidle: Remove MAX_IDLE_STATE macro Deepthi Dharwar
2013-11-06 21:02   ` Daniel Lezcano
2013-10-29 11:01 ` [PATCH V7 5/7] POWER/cpuidle: Generic POWER CPUIDLE driver supporting PSERIES Deepthi Dharwar
2013-11-06 21:05   ` Daniel Lezcano
2013-11-07  4:15     ` Deepthi Dharwar
2013-11-07  5:01       ` Benjamin Herrenschmidt
2013-11-07  5:27         ` Deepthi Dharwar
2013-10-29 11:01 ` Deepthi Dharwar [this message]
2013-11-06 21:06   ` [PATCH V7 6/7] POWER/cpuidle: Enable powernv cpuidle support Daniel Lezcano
2013-10-29 11:02 ` [PATCH V7 7/7] powernv/cpuidle: Enable idle powernv cpu to call into the cpuidle framework Deepthi Dharwar
2013-11-06 21:11   ` Daniel Lezcano

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20131029110154.31547.94129.stgit@deepthi.in.ibm.com \
    --to=deepthi@linux.vnet.ibm.com \
    --cc=benh@kernel.crashing.org \
    --cc=daniel.lezcano@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@lists.linux-foundation.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=michael@ellerman.id.au \
    --cc=preeti@linux.vnet.ibm.com \
    --cc=scottwood@freescale.com \
    --cc=srivatsa.bhat@linux.vnet.ibm.com \
    --cc=svaidy@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).