early console in setup code Probing EDD (edd=off to disable)... ok [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.14.0-rc7-00067-g2301503 (kbuild@ivytown2) (gcc version 4.8.1 (Debian 4.8.1-8) ) #8 Mon Mar 24 15:11:38 CST 2014 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffdfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000fffe000-0x000000000fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0xfffe max_arch_pfn = 0x1000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] initial memory mapped: [mem 0x00000000-0x027fffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x0fa00000-0x0fbfffff] [ 0.000000] [mem 0x0fa00000-0x0fbfffff] page 4k [ 0.000000] BRK [0x022b0000, 0x022b0fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x0c000000-0x0f9fffff] [ 0.000000] [mem 0x0c000000-0x0f9fffff] page 4k [ 0.000000] BRK [0x022b1000, 0x022b1fff] PGTABLE [ 0.000000] BRK [0x022b2000, 0x022b2fff] PGTABLE [ 0.000000] BRK [0x022b3000, 0x022b3fff] PGTABLE [ 0.000000] BRK [0x022b4000, 0x022b4fff] PGTABLE [ 0.000000] BRK [0x022b5000, 0x022b5fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0x0bffffff] [ 0.000000] [mem 0x00100000-0x0bffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x0fc00000-0x0fffdfff] [ 0.000000] [mem 0x0fc00000-0x0fffdfff] page 4k [ 0.000000] RAMDISK: [mem 0x0fcbd000-0x0ffeffff] [ 0.000000] ACPI: RSDP 000fd950 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0fffe450 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0fffff80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0fffe490 0011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 0fffff40 000040 [ 0.000000] ACPI: SSDT 0ffff7a0 000796 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0ffff680 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0ffff640 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffb000 ( fee00000) [ 0.000000] 255MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 0fffe000 [ 0.000000] low ram: 0 - 0fffe000 [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:fffd001, boot clock [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x00001000-0x0fffdfff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x0fffdfff] [ 0.000000] On node 0 totalpages: 65436 [ 0.000000] free_area_init_node: node 0, pgdat c1c58a20, node_mem_map cf95a024 [ 0.000000] Normal zone: 576 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65436 pages, LIFO batch:15 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffb000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 1a9eec0 [ 0.000000] e820: [mem 0x10000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64860 [ 0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/i386-randconfig-iv4-0324/linux-devel:devel-hourly-2014032413:2301503dfef14f2fd017a850f080c63ac5c022b7:bisect-usb/.vmlinuz-2301503dfef14f2fd017a850f080c63ac5c022b7-20140324151155-1-jaketown branch=linux-devel/devel-hourly-2014032413 BOOT_IMAGE=/kernel/i386-randconfig-iv4-0324/2301503dfef14f2fd017a850f080c63ac5c022b7/vmlinuz-3.14.0-rc7-00067-g2301503 drbd.minor_count=8 [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Memory: 236268K/261744K available (7562K kernel code, 2132K rwdata, 3220K rodata, 632K init, 5496K bss, 25476K reserved) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfffa1000 - 0xfffff000 ( 376 kB) [ 0.000000] vmalloc : 0xd07fe000 - 0xfff9f000 ( 759 MB) [ 0.000000] lowmem : 0xc0000000 - 0xcfffe000 ( 255 MB) [ 0.000000] .init : 0xc1c9f000 - 0xc1d3d000 ( 632 kB) [ 0.000000] .data : 0xc1762ce6 - 0xc1c9e080 (5356 kB) [ 0.000000] .text : 0xc1000000 - 0xc1762ce6 (7563 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] NR_IRQS:2304 nr_irqs:256 16 [ 0.000000] CPU 0 irqstacks, hard=c0096000 soft=c0080000 [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3807 kB [ 0.000000] per task-struct memory footprint: 1920 bytes [ 0.000000] ODEBUG: 0 of 0 active objects replaced [ 0.000000] ODEBUG: selftest passed [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 1600.074 MHz processor [ 0.008000] Calibrating delay loop (skipped) preset value.. 3200.14 BogoMIPS (lpj=6400296) [ 0.008014] pid_max: default: 32768 minimum: 301 [ 0.009238] ACPI: Core revision 20131218 [ 0.014599] ACPI: All ACPI Tables successfully acquired [ 0.016134] Security Framework initialized [ 0.017212] AppArmor: AppArmor initialized [ 0.018274] Kernel panic - not syncing: Could not register MntRestrict security module [ 0.020000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.14.0-rc7-00067-g2301503 #8 [ 0.020000] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.020000] c1d321b4 c1d321b4 c1a8bf88 c17517b0 c1a8bfa8 c17497a4 c199edd4 c1d4c280 [ 0.020000] c1cc2c55 c1d321b4 00000000 c1d41800 c1a8bfb4 c1cc3d6d c19e5a2c c1a8bfc4 [ 0.020000] c1cc2c1b c19e5170 00000000 c1a8bfec c1c9face 00000139 ffffffff ffffffff [ 0.020000] Call Trace: [ 0.020000] [] dump_stack+0x16/0x18 [ 0.020000] [] panic+0x87/0x16f [ 0.020000] [] ? register_security+0x12/0x4d [ 0.020000] [] mntrestrict_init+0x1e/0x2e [ 0.020000] [] security_init+0x2e/0x3f [ 0.020000] [] start_kernel+0x35a/0x3f1 [ 0.020000] [] ? repair_env_string+0x51/0x51 [ 0.020000] [] i386_start_kernel+0x12e/0x131 Elapsed time: 5 qemu-system-x86_64 -cpu kvm64 -enable-kvm -kernel /kernel/i386-randconfig-iv4-0324/2301503dfef14f2fd017a850f080c63ac5c022b7/vmlinuz-3.14.0-rc7-00067-g2301503 -append 'hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/i386-randconfig-iv4-0324/linux-devel:devel-hourly-2014032413:2301503dfef14f2fd017a850f080c63ac5c022b7:bisect-usb/.vmlinuz-2301503dfef14f2fd017a850f080c63ac5c022b7-20140324151155-1-jaketown branch=linux-devel/devel-hourly-2014032413 BOOT_IMAGE=/kernel/i386-randconfig-iv4-0324/2301503dfef14f2fd017a850f080c63ac5c022b7/vmlinuz-3.14.0-rc7-00067-g2301503 drbd.minor_count=8' -initrd /kernel-tests/initrd/yocto-minimal-i386.cgz -m 256 -smp 2 -net nic,vlan=1,model=e1000 -net user,vlan=1,hostfwd=tcp::10494-:22 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-yocto-jaketown-10 -serial file:/dev/shm/kboot/serial-yocto-jaketown-10 -daemonize -display none -monitor null