From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757047AbaEDRAB (ORCPT ); Sun, 4 May 2014 13:00:01 -0400 Received: from mail.linuxfoundation.org ([140.211.169.12]:35869 "EHLO mail.linuxfoundation.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752460AbaEDPlO (ORCPT ); Sun, 4 May 2014 11:41:14 -0400 From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman , stable@vger.kernel.org, Tomasz Figa , Kyungmin Park , Tushar Behera , Kukjin Kim Subject: [PATCH 3.14 014/158] ARM: dts: Keep G3D regulator always on for exynos5250-arndale Date: Sun, 4 May 2014 11:38:43 -0400 Message-Id: <20140504154031.962367403@linuxfoundation.org> X-Mailer: git-send-email 1.9.0 In-Reply-To: <20140504154029.975081050@linuxfoundation.org> References: <20140504154029.975081050@linuxfoundation.org> User-Agent: quilt/0.60-1 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org 3.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Tomasz Figa commit bfeda827278f09f4db35877e5f1ca9c149ca2890 upstream. Apparently, if G3D regulator is powered off, the SoC cannot enter low power modes and just hangs. This patch fixes this by keeping the regulator always on when the system is running, as suggested by Exynos 4 User's Manual in case of Exynos4210/4x12 SoCs (Exynos5250 UM does not have such note, but observed behavior seems to confirm that it is true for this SoC as well). This fixes an issue preventing Arndale board from entering sleep mode observed since commit 346f372f7b72a0 clk: exynos5250: Add CLK_IGNORE_UNUSED flag for pmu clock that landed in kernel 3.10, which has fixed the clock driver to make the SoC actually try to enter the sleep mode. Signed-off-by: Tomasz Figa Acked-by: Kyungmin Park Tested-by: Tushar Behera Signed-off-by: Kukjin Kim Signed-off-by: Greg Kroah-Hartman --- arch/arm/boot/dts/exynos5250-arndale.dts | 1 + 1 file changed, 1 insertion(+) --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -287,6 +287,7 @@ regulator-name = "vdd_g3d"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; + regulator-always-on; regulator-boot-on; op_mode = <1>; };