From: Nicolin Chen <Guangyu.Chen@freescale.com>
To: <vinod.koul@intel.com>
Cc: <broonie@kernel.org>, <s.hauer@pengutronix.de>,
Nicolin Chen <nicoleotsuka@gmail.com>, <robh+dt@kernel.org>,
<pawel.moll@arm.com>, <mark.rutland@arm.com>,
<ijc+devicetree@hellion.org.uk>, <galak@codeaurora.org>,
<rdunlap@infradead.org>, <lgirdwood@gmail.com>, <perex@perex.cz>,
<tiwai@suse.de>, <timur@tabi.org>, <grant.likely@linaro.org>,
<devicetree@vger.kernel.org>, <linux-doc@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <alsa-devel@alsa-project.org>,
<linuxppc-dev@lists.ozlabs.org>, <dan.j.williams@intel.com>,
<dmaengine@vger.kernel.org>, <b38343@freescale.com>,
<b02247@freescale.com>, <b42378@freescale.com>
Subject: Re: [RFC][PATCH 1/2] dma: imx-sdma: Add device to device support
Date: Fri, 11 Jul 2014 18:11:28 +0800 [thread overview]
Message-ID: <20140711101126.GA667@MrMyself> (raw)
In-Reply-To: <42744e778ce8a4b424d5642f86d18ef047bcc7cd.1402653667.git.nicoleotsuka@gmail.com>
On Fri, Jun 13, 2014 at 06:07:04PM +0800, Nicolin Chen wrote:
> This patch adds DEV_TO_DEV support for i.MX SDMA driver to support data
> tranfer between two peripheral FIFOs. The per_2_per script requires two
> peripheral addresses and two DMA requests. So this patch also adds them
> into private structure.
>
> Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Hi Vinod,
The patch has been here for a month without any comment.
Could you please help on the review or give me an ack?
I really hope my ASRC driver will be merged within this cycle.
Thank you,
Nicolin
> ---
> drivers/dma/imx-sdma.c | 40 ++++++++++++++++++++++++++++++-----
> include/linux/platform_data/dma-imx.h | 1 +
> 2 files changed, 36 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
> index 85561dc..5af1a69 100644
> --- a/drivers/dma/imx-sdma.c
> +++ b/drivers/dma/imx-sdma.c
> @@ -258,8 +258,9 @@ struct sdma_channel {
> struct sdma_buffer_descriptor *bd;
> dma_addr_t bd_phys;
> unsigned int pc_from_device, pc_to_device;
> + unsigned int device_to_device;
> unsigned long flags;
> - dma_addr_t per_address;
> + dma_addr_t per_address, per_address2;
> unsigned long event_mask[2];
> unsigned long watermark_level;
> u32 shp_addr, per_addr;
> @@ -696,6 +697,7 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
>
> sdmac->pc_from_device = 0;
> sdmac->pc_to_device = 0;
> + sdmac->device_to_device = 0;
>
> switch (peripheral_type) {
> case IMX_DMATYPE_MEMORY:
> @@ -770,6 +772,7 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
>
> sdmac->pc_from_device = per_2_emi;
> sdmac->pc_to_device = emi_2_per;
> + sdmac->device_to_device = per_2_per;
> }
>
> static int sdma_load_context(struct sdma_channel *sdmac)
> @@ -782,11 +785,12 @@ static int sdma_load_context(struct sdma_channel *sdmac)
> int ret;
> unsigned long flags;
>
> - if (sdmac->direction == DMA_DEV_TO_MEM) {
> + if (sdmac->direction == DMA_DEV_TO_MEM)
> load_address = sdmac->pc_from_device;
> - } else {
> + else if (sdmac->direction == DMA_DEV_TO_DEV)
> + load_address = sdmac->device_to_device;
> + else
> load_address = sdmac->pc_to_device;
> - }
>
> if (load_address < 0)
> return load_address;
> @@ -850,6 +854,12 @@ static int sdma_config_channel(struct sdma_channel *sdmac)
> sdma_event_enable(sdmac, sdmac->event_id0);
> }
>
> + if (sdmac->event_id1) {
> + if (sdmac->event_id1 >= sdmac->sdma->drvdata->num_events)
> + return -EINVAL;
> + sdma_event_enable(sdmac, sdmac->event_id1);
> + }
> +
> switch (sdmac->peripheral_type) {
> case IMX_DMATYPE_DSP:
> sdma_config_ownership(sdmac, false, true, true);
> @@ -880,7 +890,12 @@ static int sdma_config_channel(struct sdma_channel *sdmac)
> /* Watermark Level */
> sdmac->watermark_level |= sdmac->watermark_level;
> /* Address */
> - sdmac->shp_addr = sdmac->per_address;
> + if (sdmac->direction == DMA_DEV_TO_DEV) {
> + sdmac->shp_addr = sdmac->per_address2;
> + sdmac->per_addr = sdmac->per_address;
> + } else {
> + sdmac->shp_addr = sdmac->per_address;
> + }
> } else {
> sdmac->watermark_level = 0; /* FIXME: M3_BASE_ADDRESS */
> }
> @@ -974,6 +989,7 @@ static int sdma_alloc_chan_resources(struct dma_chan *chan)
>
> sdmac->peripheral_type = data->peripheral_type;
> sdmac->event_id0 = data->dma_request;
> + sdmac->event_id1 = data->dma_request2;
>
> clk_enable(sdmac->sdma->clk_ipg);
> clk_enable(sdmac->sdma->clk_ahb);
> @@ -1213,6 +1229,19 @@ static int sdma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
> sdmac->watermark_level = dmaengine_cfg->src_maxburst *
> dmaengine_cfg->src_addr_width;
> sdmac->word_size = dmaengine_cfg->src_addr_width;
> + } else if (dmaengine_cfg->direction == DMA_DEV_TO_DEV) {
> + sdmac->per_address = dmaengine_cfg->src_addr;
> + sdmac->per_address2 = dmaengine_cfg->dst_addr;
> + /*
> + * For per_2_per sciprt, register r7 requires two
> + * watermark levels: the lower placed at bits [0-7]
> + * and the higher one placed at bits [16-23].
> + */
> + sdmac->watermark_level =
> + dmaengine_cfg->src_maxburst & 0xff;
> + sdmac->watermark_level |=
> + (dmaengine_cfg->dst_maxburst & 0xff) << 16;
> + sdmac->word_size = dmaengine_cfg->dst_addr_width;
> } else {
> sdmac->per_address = dmaengine_cfg->dst_addr;
> sdmac->watermark_level = dmaengine_cfg->dst_maxburst *
> @@ -1433,6 +1462,7 @@ static struct dma_chan *sdma_xlate(struct of_phandle_args *dma_spec,
> data.dma_request = dma_spec->args[0];
> data.peripheral_type = dma_spec->args[1];
> data.priority = dma_spec->args[2];
> + data.dma_request2 = 0;
>
> return dma_request_channel(mask, sdma_filter_fn, &data);
> }
> diff --git a/include/linux/platform_data/dma-imx.h b/include/linux/platform_data/dma-imx.h
> index 7aa0e89..6a1357d 100644
> --- a/include/linux/platform_data/dma-imx.h
> +++ b/include/linux/platform_data/dma-imx.h
> @@ -51,6 +51,7 @@ enum imx_dma_prio {
>
> struct imx_dma_data {
> int dma_request; /* DMA request line */
> + int dma_request2; /* secondary DMA request line */
> enum sdma_peripheral_type peripheral_type;
> int priority;
> };
> --
> 1.8.4
>
next prev parent reply other threads:[~2014-07-11 10:24 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-13 10:07 [RFC][PATCH 0/2] Add ASRC Peripheral to Peripheral driver Nicolin Chen
2014-06-13 10:07 ` [RFC][PATCH 1/2] dma: imx-sdma: Add device to device support Nicolin Chen
2014-06-27 10:58 ` Nicolin Chen
2014-07-11 10:11 ` Nicolin Chen [this message]
2014-06-13 10:07 ` [RFC][PATCH 2/2] ASoC: fsl_asrc: Add ASRC ASoC CPU DAI and platform drivers Nicolin Chen
2014-07-24 8:25 ` [RFC][PATCH 0/2] Add ASRC Peripheral to Peripheral driver Nicolin Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140711101126.GA667@MrMyself \
--to=guangyu.chen@freescale.com \
--cc=alsa-devel@alsa-project.org \
--cc=b02247@freescale.com \
--cc=b38343@freescale.com \
--cc=b42378@freescale.com \
--cc=broonie@kernel.org \
--cc=dan.j.williams@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=grant.likely@linaro.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=lgirdwood@gmail.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mark.rutland@arm.com \
--cc=nicoleotsuka@gmail.com \
--cc=pawel.moll@arm.com \
--cc=perex@perex.cz \
--cc=rdunlap@infradead.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=timur@tabi.org \
--cc=tiwai@suse.de \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).