From: Lee Jones <lee.jones@linaro.org>
To: Octavian Purdila <octavian.purdila@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Linus Walleij <linus.walleij@linaro.org>,
Alexandre Courbot <gnurou@gmail.com>,
wsa@the-dreams.de, Samuel Ortiz <sameo@linux.intel.com>,
Arnd Bergmann <arnd@arndb.de>, Johan Hovold <johan@kernel.org>,
Daniel Baluta <daniel.baluta@intel.com>,
Laurentiu Palcu <laurentiu.palcu@intel.com>,
linux-usb@vger.kernel.org, lkml <linux-kernel@vger.kernel.org>,
linux-gpio@vger.kernel.org, linux-i2c@vger.kernel.org
Subject: Re: [PATCH v4 1/3] mfd: add support for Diolan DLN-2 devices
Date: Wed, 17 Sep 2014 08:56:15 -0700 [thread overview]
Message-ID: <20140917155615.GG30918@lee--X1> (raw)
In-Reply-To: <CAE1zotJWUnduPUd9C8EgSHHSo-OCgdj7c-sKaT5M2Ajj2CmNWw@mail.gmail.com>
On Wed, 17 Sep 2014, Octavian Purdila wrote:
> On Wed, Sep 17, 2014 at 2:21 AM, Lee Jones <lee.jones@linaro.org> wrote:
> >
> > On Tue, 09 Sep 2014, Octavian Purdila wrote:
> >
> > > This patch implements the USB part of the Diolan USB-I2C/SPI/GPIO
> > > Master Adapter DLN-2. Details about the device can be found here:
> > >
> > > https://www.diolan.com/i2c/i2c_interface.html.
> > >
> > > Information about the USB protocol can be found in the Programmer's
> > > Reference Manual [1], see section 1.7.
> > >
> > > Because the hardware has a single transmit endpoint and a single
> > > receive endpoint the communication between the various DLN2 drivers
> > > and the hardware will be muxed/demuxed by this driver.
> > >
> > > Each DLN2 module will be identified by the handle field within the DLN2
> > > message header. If a DLN2 module issues multiple commands in parallel
> > > they will be identified by the echo counter field in the message header.
> > >
> > > The DLN2 modules can use the dln2_transfer() function to issue a
> > > command and wait for its response. They can also register a callback
> > > that is going to be called when a specific event id is generated by
> > > the device (e.g. GPIO interrupts). The device uses handle 0 for
> > > sending events.
> > >
> > > [1] https://www.diolan.com/downloads/dln-api-manual.pdf
> > >
> > > Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
> > > ---
> > > drivers/mfd/Kconfig | 9 +
> > > drivers/mfd/Makefile | 1 +
> > > drivers/mfd/dln2.c | 681 +++++++++++++++++++++++++++++++++++++++++++++++
> > > include/linux/mfd/dln2.h | 71 +++++
> > > 4 files changed, 762 insertions(+)
> > > create mode 100644 drivers/mfd/dln2.c
> > > create mode 100644 include/linux/mfd/dln2.h
[...]
> > > diff --git a/include/linux/mfd/dln2.h b/include/linux/mfd/dln2.h
> > > new file mode 100644
> > > index 0000000..197565d
> > > --- /dev/null
> > > +++ b/include/linux/mfd/dln2.h
> > > @@ -0,0 +1,71 @@
> > > +#ifndef __LINUX_USB_DLN2_H
> > > +#define __LINUX_USB_DLN2_H
> > > +
> > > +#define DLN2_CMD(cmd, id) ((cmd) | ((id) << 8))
> > > +
> > > +struct dln2_platform_data {
> > > + u16 handle;
> > > + union {
> > > + struct {
> > > + u8 port;
> > > + } i2c;
> > > + };
> > > +};
> >
> > Why this complexity?
>
> There is also an SPI interface on this adapter which will probably the
> port information and maybe some additional information. Would you
> prefer to add the union later, when we add the SPI driver?
Yes please.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
next prev parent reply other threads:[~2014-09-17 15:56 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-09 19:24 [PATCH v4 0/3] mfd: add support for Diolan DLN-2 Octavian Purdila
2014-09-09 19:24 ` [PATCH v4 1/3] mfd: add support for Diolan DLN-2 devices Octavian Purdila
2014-09-16 23:21 ` Lee Jones
2014-09-17 7:25 ` Octavian Purdila
2014-09-17 7:38 ` Johan Hovold
2014-09-17 15:56 ` Lee Jones [this message]
2014-09-17 9:10 ` Johan Hovold
2014-09-17 15:46 ` Lee Jones
2014-09-18 11:31 ` Johan Hovold
2014-09-18 14:21 ` Johan Hovold
2014-09-09 19:24 ` [PATCH v4 2/3] i2c: add support for Diolan DLN-2 USB-I2C adapter Octavian Purdila
2014-09-17 9:44 ` Johan Hovold
2014-09-17 10:07 ` Octavian Purdila
2014-09-18 8:19 ` Johan Hovold
2014-09-18 8:49 ` Octavian Purdila
2014-09-18 9:13 ` Johan Hovold
2014-09-09 19:24 ` [PATCH v4 3/3] gpio: add support for the Diolan DLN-2 USB GPIO driver Octavian Purdila
2014-09-18 10:54 ` Johan Hovold
2014-09-18 12:43 ` Octavian Purdila
2014-09-18 12:46 ` Johan Hovold
2014-09-18 15:54 ` Octavian Purdila
2014-09-19 7:11 ` Johan Hovold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140917155615.GG30918@lee--X1 \
--to=lee.jones@linaro.org \
--cc=arnd@arndb.de \
--cc=daniel.baluta@intel.com \
--cc=gnurou@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=johan@kernel.org \
--cc=laurentiu.palcu@intel.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=octavian.purdila@intel.com \
--cc=sameo@linux.intel.com \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).