From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754766AbaJCVG7 (ORCPT ); Fri, 3 Oct 2014 17:06:59 -0400 Received: from mail-pd0-f182.google.com ([209.85.192.182]:47074 "EHLO mail-pd0-f182.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752876AbaJCVG4 (ORCPT ); Fri, 3 Oct 2014 17:06:56 -0400 Date: Fri, 3 Oct 2014 14:06:51 -0700 From: Dmitry Torokhov To: Duson Lin Cc: linux-kernel@vger.kernel.org, linux-input@vger.kernel.org, bleung@chromium.org, agnescheng@chromium.org, phoenix@emc.com.tw, jeff.chuang@emc.com.tw, devicetree@vger.kernel.org Subject: Re: [PATCH v2] Input: add i2c/smbus driver for elan touchpad Message-ID: <20141003210651.GC4987@dtor-ws> References: <1389064083-11018-1-git-send-email-dusonlin@emc.com.tw> <20141003210357.GB4987@dtor-ws> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <20141003210357.GB4987@dtor-ws> User-Agent: Mutt/1.5.21 (2010-09-15) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org [adding devicetree folks...] On Fri, Oct 03, 2014 at 02:03:57PM -0700, Dmitry Torokhov wrote: > Hi Duson, > > On Tue, Jan 07, 2014 at 11:08:03AM +0800, Duson Lin wrote: > > This driver adds support for elan i2c/smbus touchpad found on some > > laptops PC > > > > I was looking at your original patch together with varous other patchs > for the device in ChromeOS trees and I ended up with the following > version. Please take a look and shout if you see something wrong. > > The SMbus portion is untested as I do not have hardware; I2C does work > on actual hardware. > > Thanks. > > -- > Dmitry > > Input: driver for Elan I2C/SMbus touchpad > > From: Duson Lin > > This driver supports Elan I2C/SMbous touchpads found in some laptops and > also in many Chromebooks. > > Signed-off-by: Duson Lin > Signed-off-by: Dmitry Torokhov > --- > .../devicetree/bindings/input/elan_i2c.txt | 34 + > .../devicetree/bindings/vendor-prefixes.txt | 1 > drivers/input/mouse/Kconfig | 30 + > drivers/input/mouse/Makefile | 5 > drivers/input/mouse/elan_i2c.h | 86 ++ > drivers/input/mouse/elan_i2c_core.c | 1129 ++++++++++++++++++++ > drivers/input/mouse/elan_i2c_i2c.c | 612 +++++++++++ > drivers/input/mouse/elan_i2c_smbus.c | 514 +++++++++ > 8 files changed, 2411 insertions(+) > create mode 100644 Documentation/devicetree/bindings/input/elan_i2c.txt > create mode 100644 drivers/input/mouse/elan_i2c.h > create mode 100644 drivers/input/mouse/elan_i2c_core.c > create mode 100644 drivers/input/mouse/elan_i2c_i2c.c > create mode 100644 drivers/input/mouse/elan_i2c_smbus.c > > diff --git a/Documentation/devicetree/bindings/input/elan_i2c.txt b/Documentation/devicetree/bindings/input/elan_i2c.txt > new file mode 100644 > index 0000000..0a6ee7d > --- /dev/null > +++ b/Documentation/devicetree/bindings/input/elan_i2c.txt > @@ -0,0 +1,34 @@ > +Elantech I2C Touchpad > + > +Required properties: > +- compatible: must be "elan,i2c_touchpad". > +- reg: I2C address of the chip. > +- interrupt-parent: a phandle for the gpio controller (see interrupt > + binding[0]). > +- interrupts: (gpio) interrupt to which the chip is connected (see interrupt > + binding[0]). > + > +Optional properties: > +- wakeup-source: touchpad should be configured as a wakeup source. > +- pinctrl-names: should be "default" (see pinctrl binding [1]). > +- pinctrl-0: a phandle pointing to the pin settings for the device (see > + pinctrl binding [1]). > +- vcc-supply: a phandle for the regulator supplying 3.3V power. > + > +[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt > +[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt > + > +Example: > + &i2c1 { > + /* ... */ > + > + touchpad@15 { > + compatible = "elan,i2c_touchpad"; > + reg = <0x15>; > + interrupt-parent = <&gpio4>; > + interrupts = <0x0 IRQ_TYPE_EDGE_FALLING>; > + wakeup-source; > + }; > + > + /* ... */ > + }; > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt > index ac7269f..e6469ec 100644 > --- a/Documentation/devicetree/bindings/vendor-prefixes.txt > +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt > @@ -42,6 +42,7 @@ dlink D-Link Corporation > dmo Data Modul AG > ebv EBV Elektronik > edt Emerging Display Technologies > +elan Elan Microelectronic Corp. > emmicro EM Microelectronic > epcos EPCOS AG > epfl Ecole Polytechnique Fédérale de Lausanne > diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig > index 366fc7a..d8b46b0 100644 > --- a/drivers/input/mouse/Kconfig > +++ b/drivers/input/mouse/Kconfig > @@ -215,6 +215,36 @@ config MOUSE_CYAPA > To compile this driver as a module, choose M here: the module will be > called cyapa. > > +config MOUSE_ELAN_I2C > + tristate "ELAN I2C Touchpad support" > + depends on I2C > + help > + This driver adds support for Elan I2C/SMbus Trackpads. > + > + Say Y here if you have a ELAN I2C/SMbus Touchpad. > + > + To compile this driver as a module, choose M here: the module will be > + called elan_i2c. > + > +config MOUSE_ELAN_I2C_I2C > + bool "Enable I2C support" > + depends on MOUSE_ELAN_I2C > + default y > + help > + Say Y here if Elan Touchpad in your system is connected to > + a standard I2C controller. > + > + If unsure, say Y. > + > +config MOUSE_ELAN_I2C_SMBUS > + bool "Enable SMbus support" > + depends on MOUSE_ELAN_I2C > + help > + Say Y here if Elan Touchpad in your system is connected to > + a SMbus adapter. > + > + If unsure, say Y. > + > config MOUSE_INPORT > tristate "InPort/MS/ATIXL busmouse" > depends on ISA > diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile > index dda507f..560003d 100644 > --- a/drivers/input/mouse/Makefile > +++ b/drivers/input/mouse/Makefile > @@ -9,6 +9,7 @@ obj-$(CONFIG_MOUSE_APPLETOUCH) += appletouch.o > obj-$(CONFIG_MOUSE_ATARI) += atarimouse.o > obj-$(CONFIG_MOUSE_BCM5974) += bcm5974.o > obj-$(CONFIG_MOUSE_CYAPA) += cyapa.o > +obj-$(CONFIG_MOUSE_ELAN_I2C) += elan_i2c.o > obj-$(CONFIG_MOUSE_GPIO) += gpio_mouse.o > obj-$(CONFIG_MOUSE_INPORT) += inport.o > obj-$(CONFIG_MOUSE_LOGIBM) += logibm.o > @@ -34,3 +35,7 @@ psmouse-$(CONFIG_MOUSE_PS2_SENTELIC) += sentelic.o > psmouse-$(CONFIG_MOUSE_PS2_TRACKPOINT) += trackpoint.o > psmouse-$(CONFIG_MOUSE_PS2_TOUCHKIT) += touchkit_ps2.o > psmouse-$(CONFIG_MOUSE_PS2_CYPRESS) += cypress_ps2.o > + > +elan_i2c-objs := elan_i2c_core.o > +elan_i2c-$(CONFIG_MOUSE_ELAN_I2C_I2C) += elan_i2c_i2c.o > +elan_i2c-$(CONFIG_MOUSE_ELAN_I2C_SMBUS) += elan_i2c_smbus.o > diff --git a/drivers/input/mouse/elan_i2c.h b/drivers/input/mouse/elan_i2c.h > new file mode 100644 > index 0000000..2e83862 > --- /dev/null > +++ b/drivers/input/mouse/elan_i2c.h > @@ -0,0 +1,86 @@ > +/* > + * Elan I2C/SMBus Touchpad driver > + * > + * Copyright (c) 2013 ELAN Microelectronics Corp. > + * > + * Author: 林政維 (Duson Lin) > + * Version: 1.5.5 > + * > + * Based on cyapa driver: > + * copyright (c) 2011-2012 Cypress Semiconductor, Inc. > + * copyright (c) 2011-2012 Google, Inc. > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms of the GNU General Public License version 2 as published > + * by the Free Software Foundation. > + * > + * Trademarks are the property of their respective owners. > + */ > + > +#ifndef _ELAN_I2C_H > +#define _ELAN_i2C_H > + > +#include > + > +#define ETP_ENABLE_ABS 0x0001 > +#define ETP_ENABLE_CALIBRATE 0x0002 > +#define ETP_DISABLE_CALIBRATE 0x0000 > +#define ETP_DISABLE_POWER 0x0001 > + > +/* IAP Firmware handling */ > +#define ETP_FW_NAME "elan_i2c.bin" > +#define ETP_IAP_START_ADDR 0x0083 > +#define ETP_FW_IAP_PAGE_ERR (1 << 5) > +#define ETP_FW_IAP_INTF_ERR (1 << 4) > +#define ETP_FW_PAGE_SIZE 64 > +#define ETP_FW_PAGE_COUNT 768 > +#define ETP_FW_SIZE (ETP_FW_PAGE_SIZE * ETP_FW_PAGE_COUNT) > + > +struct i2c_client; > +struct completion; > + > +enum tp_mode { > + IAP_MODE = 1, > + MAIN_MODE > +}; > + > +struct elan_transport_ops { > + int (*initialize)(struct i2c_client *client); > + int (*sleep_control)(struct i2c_client *, bool sleep); > + int (*power_control)(struct i2c_client *, bool enable); > + int (*set_mode)(struct i2c_client *client, u8 mode); > + > + int (*calibrate)(struct i2c_client *client); > + int (*calibrate_result)(struct i2c_client *client, u8 *val); > + > + int (*get_baseline_data)(struct i2c_client *client, > + bool max_baseliune, u8 *value); > + > + int (*get_version)(struct i2c_client *client, bool iap, u8 *version); > + int (*get_sm_version)(struct i2c_client *client, u8 *version); > + int (*get_checksum)(struct i2c_client *client, bool iap, u16 *csum); > + int (*get_product_id)(struct i2c_client *client, u8 *id); > + > + int (*get_max)(struct i2c_client *client, > + unsigned int *max_x, unsigned int *max_y); > + int (*get_resolution)(struct i2c_client *client, > + u8 *hw_res_x, u8 *hw_res_y); > + int (*get_num_traces)(struct i2c_client *client, > + unsigned int *x_tracenum, > + unsigned int *y_tracenum); > + > + int (*iap_get_mode)(struct i2c_client *client, enum tp_mode *mode); > + int (*iap_reset)(struct i2c_client *client); > + > + int (*prepare_fw_update)(struct i2c_client *client); > + int (*write_fw_block)(struct i2c_client *client, > + const u8 *page, u16 checksum, int idx); > + int (*finish_fw_update)(struct i2c_client *client, > + struct completion *reset_done); > + > + int (*get_report)(struct i2c_client *client, u8 *report); > +}; > + > +extern const struct elan_transport_ops elan_smbus_ops, elan_i2c_ops; > + > +#endif /* _ELAN_I2C_H */ > diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c > new file mode 100644 > index 0000000..f1e5e30 > --- /dev/null > +++ b/drivers/input/mouse/elan_i2c_core.c > @@ -0,0 +1,1129 @@ > +/* > + * Elan I2C/SMBus Touchpad driver > + * > + * Copyright (c) 2013 ELAN Microelectronics Corp. > + * > + * Author: 林政維 (Duson Lin) > + * Version: 1.5.5 > + * > + * Based on cyapa driver: > + * copyright (c) 2011-2012 Cypress Semiconductor, Inc. > + * copyright (c) 2011-2012 Google, Inc. > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms of the GNU General Public License version 2 as published > + * by the Free Software Foundation. > + * > + * Trademarks are the property of their respective owners. > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include "elan_i2c.h" > + > +#define DRIVER_NAME "elan_i2c" > +#define ELAN_DRIVER_VERSION "1.5.5" > +#define ETP_PRESSURE_OFFSET 25 > +#define ETP_MAX_PRESSURE 255 > +#define ETP_FWIDTH_REDUCE 90 > +#define ETP_FINGER_WIDTH 15 > +#define ETP_RETRY_COUNT 3 > + > +#define ETP_MAX_FINGERS 5 > +#define ETP_FINGER_DATA_LEN 5 > +#define ETP_REPORT_ID 0x5D > +#define ETP_REPORT_ID_OFFSET 2 > +#define ETP_TOUCH_INFO_OFFSET 3 > +#define ETP_FINGER_DATA_OFFSET 4 > +#define ETP_MAX_REPORT_LEN 34 > + > +/* The main device structure */ > +struct elan_tp_data { > + struct i2c_client *client; > + struct input_dev *input; > + struct regulator *vcc; > + > + const struct elan_transport_ops *ops; > + > + /* for fw update */ > + struct completion fw_completion; > + bool in_fw_update; > + > + struct mutex sysfs_mutex; > + > + unsigned int max_x; > + unsigned int max_y; > + unsigned int width_x; > + unsigned int width_y; > + unsigned int x_res; > + unsigned int y_res; > + > + u8 product_id; > + u8 fw_version; > + u8 sm_version; > + u8 iap_version; > + u16 fw_checksum; > + > + u8 mode; > + > + bool irq_wake; > + > + u8 min_baseline; > + u8 max_baseline; > + bool baseline_ready; > +}; > + > +static int elan_enable_power(struct elan_tp_data *data) > +{ > + int repeat = ETP_RETRY_COUNT; > + int error; > + > + error = regulator_enable(data->vcc); > + if (error) { > + dev_err(&data->client->dev, > + "Failed to enable regulator: %d\n", error); > + return error; > + } > + > + do { > + error = data->ops->power_control(data->client, true); > + if (error >= 0) > + return 0; > + > + msleep(30); > + } while (--repeat > 0); > + > + return error; > +} > + > +static int elan_disable_power(struct elan_tp_data *data) > +{ > + int repeat = ETP_RETRY_COUNT; > + int error; > + > + do { > + error = data->ops->power_control(data->client, false); > + if (!error) { > + error = regulator_disable(data->vcc); > + if (error) { > + dev_err(&data->client->dev, > + "Failed to disable regulator: %d\n", > + error); > + /* Attempt to power the chip back up */ > + data->ops->power_control(data->client, true); > + break; > + } > + > + return 0; > + } > + > + msleep(30); > + } while (--repeat > 0); > + > + return error; > +} > + > +static int elan_sleep(struct elan_tp_data *data) > +{ > + int repeat = ETP_RETRY_COUNT; > + int error; > + > + do { > + error = data->ops->sleep_control(data->client, true); > + if (!error) > + return 0; > + > + msleep(30); > + } while (--repeat > 0); > + > + return error; > +} > + > +static int __elan_initialize(struct elan_tp_data *data) > +{ > + struct i2c_client *client = data->client; > + int error; > + > + error = data->ops->initialize(client); > + if (error) { > + dev_err(&client->dev, "device initialize failed: %d\n", error); > + return error; > + } > + > + data->mode |= ETP_ENABLE_ABS; > + error = data->ops->set_mode(client, data->mode); > + if (error) { > + dev_err(&client->dev, > + "failed to switch to absolute mode: %d\n", error); > + return error; > + } > + > + error = data->ops->sleep_control(client, false); > + if (error) { > + dev_err(&client->dev, > + "failed to wake device up: %d\n", error); > + return error; > + } > + > + return 0; > +} > + > +static int elan_initialize(struct elan_tp_data *data) > +{ > + int repeat = ETP_RETRY_COUNT; > + int error; > + > + do { > + error = __elan_initialize(data); > + if (!error) > + return 0; > + > + repeat--; > + msleep(30); > + } while (--repeat > 0); > + > + return error; > +} > + > +static int elan_query_device_info(struct elan_tp_data *data) > +{ > + int error; > + > + error = data->ops->get_product_id(data->client, &data->product_id); > + if (error) > + return error; > + > + error = data->ops->get_version(data->client, false, &data->fw_version); > + if (error) > + return error; > + > + error = data->ops->get_checksum(data->client, false, > + &data->fw_checksum); > + if (error) > + return error; > + > + error = data->ops->get_sm_version(data->client, &data->sm_version); > + if (error) > + return error; > + > + error = data->ops->get_version(data->client, true, &data->iap_version); > + if (error) > + return error; > + > + return 0; > +} > + > +static unsigned int elan_convert_resolution(u8 val) > +{ > + /* > + * (value from firmware) * 10 + 790 = dpi > + * > + * We also have to convert dpi to dots/mm (*10/254 to avoid floating > + * point). > + */ > + > + return ((int)(char)val * 10 + 790) * 10 / 254; > +} > + > +static int elan_query_device_parameters(struct elan_tp_data *data) > +{ > + unsigned int x_traces, y_traces; > + u8 hw_x_res, hw_y_res; > + int error; > + > + error = data->ops->get_max(data->client, &data->max_x, &data->max_y); > + if (error) > + return error; > + > + error = data->ops->get_num_traces(data->client, &x_traces, &y_traces); > + if (error) > + return error; > + > + data->width_x = data->max_x / x_traces; > + data->width_y = data->max_y / y_traces; > + > + error = data->ops->get_resolution(data->client, &hw_x_res, &hw_y_res); > + if (error) > + return error; > + > + data->x_res = elan_convert_resolution(hw_x_res); > + data->y_res = elan_convert_resolution(hw_y_res); > + > + return 0; > +} > + > +/* > + ********************************************************** > + * IAP firmware updater related routines > + ********************************************************** > + */ > +static int elan_write_fw_block(struct elan_tp_data *data, > + const u8 *page, u16 checksum, int idx) > +{ > + int retry = ETP_RETRY_COUNT; > + int error; > + > + do { > + error = data->ops->write_fw_block(data->client, > + page, checksum, idx); > + if (!error) > + return 0; > + > + dev_dbg(&data->client->dev, > + "IAP retrying page %d (error: %d)\n", idx, error); > + } while (--retry > 0); > + > + return error; > +} > + > +static int __elan_update_firmware(struct elan_tp_data *data, > + const struct firmware *fw) > +{ > + struct i2c_client *client = data->client; > + struct device *dev = &client->dev; > + int i, j; > + int error; > + u16 iap_start_addr; > + u16 boot_page_count; > + u16 sw_checksum = 0, fw_checksum = 0; > + > + error = data->ops->prepare_fw_update(client); > + if (error) > + return error; > + > + iap_start_addr = get_unaligned_le16(&fw->data[ETP_IAP_START_ADDR * 2]); > + > + boot_page_count = (iap_start_addr * 2) / ETP_FW_PAGE_SIZE; > + for (i = boot_page_count; i < ETP_FW_PAGE_COUNT; i++) { > + u16 checksum = 0; > + const u8 *page = &fw->data[i * ETP_FW_PAGE_SIZE]; > + > + for (j = 0; j < ETP_FW_PAGE_SIZE; j += 2) > + checksum += ((page[j + 1] << 8) | page[j]); > + > + error = elan_write_fw_block(data, page, checksum, i); > + if (error) { > + dev_err(dev, "write page %d fail: %d\n", i, error); > + return error; > + } > + > + sw_checksum += checksum; > + } > + > + /* Wait WDT reset and power on reset */ > + msleep(600); > + > + error = data->ops->finish_fw_update(client, &data->fw_completion); > + if (error) > + return error; > + > + error = data->ops->get_checksum(client, true, &fw_checksum); > + if (error) > + return error; > + > + if (sw_checksum != fw_checksum) { > + dev_err(dev, "checksum diff sw=[%04X], fw=[%04X]\n", > + sw_checksum, fw_checksum); > + return -EIO; > + } > + > + return 0; > +} > + > +static int elan_update_firmware(struct elan_tp_data *data, > + const struct firmware *fw) > +{ > + struct i2c_client *client = data->client; > + int retval; > + > + dev_dbg(&client->dev, "Starting firmware update....\n"); > + > + disable_irq(client->irq); > + data->in_fw_update = true; > + > + retval = __elan_update_firmware(data, fw); > + if (retval) { > + dev_err(&client->dev, "firmware update failed: %d\n", retval); > + data->ops->iap_reset(client); > + } else { > + /* Reinitialize TP after fw is updated */ > + elan_initialize(data); > + elan_query_device_info(data); > + } > + > + data->in_fw_update = false; > + enable_irq(client->irq); > + > + return retval; > +} > + > + > +/* > + ******************************************************************* > + * SYSFS attributes > + ******************************************************************* > + */ > +static ssize_t elan_sysfs_read_fw_checksum(struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct elan_tp_data *data = dev_get_drvdata(dev); > + > + return sprintf(buf, "0x%04x\n", data->fw_checksum); > +} > + > +static ssize_t elan_sysfs_read_product_id(struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct elan_tp_data *data = dev_get_drvdata(dev); > + > + return sprintf(buf, "%d.0\n", data->product_id); > +} > + > +static ssize_t elan_sysfs_read_fw_ver(struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct elan_tp_data *data = dev_get_drvdata(dev); > + > + return sprintf(buf, "%d.0\n", data->fw_version); > +} > + > +static ssize_t elan_sysfs_read_sm_ver(struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct elan_tp_data *data = dev_get_drvdata(dev); > + > + return sprintf(buf, "%d.0\n", data->sm_version); > +} > + > +static ssize_t elan_sysfs_read_iap_ver(struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct elan_tp_data *data = dev_get_drvdata(dev); > + > + return sprintf(buf, "%d.0\n", data->iap_version); > +} > + > +static ssize_t elan_sysfs_update_fw(struct device *dev, > + struct device_attribute *attr, > + const char *buf, size_t count) > +{ > + struct elan_tp_data *data = dev_get_drvdata(dev); > + const struct firmware *fw; > + int error; > + > + error = request_firmware(&fw, ETP_FW_NAME, dev); > + if (error) { > + dev_err(dev, "cannot load firmware %s: %d\n", > + ETP_FW_NAME, error); > + return error; > + } > + > + /* Firmware must be exactly PAGE_NUM * PAGE_SIZE bytes */ > + if (fw->size != ETP_FW_SIZE) { > + dev_err(dev, "invalid firmware size = %zu, expected %d.\n", > + fw->size, ETP_FW_SIZE); > + error = -EBADF; > + goto out_release_fw; > + } > + > + error = mutex_lock_interruptible(&data->sysfs_mutex); > + if (error) > + goto out_release_fw; > + > + error = elan_update_firmware(data, fw); > + > + mutex_unlock(&data->sysfs_mutex); > + > +out_release_fw: > + release_firmware(fw); > + return error ?: count; > +} > + > +static ssize_t calibrate_store(struct device *dev, > + struct device_attribute *attr, > + const char *buf, size_t count) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct elan_tp_data *data = i2c_get_clientdata(client); > + int tries = 20; > + int retval; > + int error; > + u8 val[3]; > + > + retval = mutex_lock_interruptible(&data->sysfs_mutex); > + if (retval) > + return retval; > + > + disable_irq(client->irq); > + > + data->mode |= ETP_ENABLE_CALIBRATE; > + retval = data->ops->set_mode(client, data->mode); > + if (retval) { > + dev_err(dev, "failed to enable calibration mode: %d\n", > + retval); > + goto out; > + } > + > + retval = data->ops->calibrate(client); > + if (retval) { > + dev_err(dev, "failed to start calibration: %d\n", > + retval); > + goto out_disable_calibrate; > + } > + > + val[0] = 0xff; > + do { > + /* Wait 250ms before checking if calibration has completed. */ > + msleep(250); > + > + retval = data->ops->calibrate_result(client, val); > + if (retval) > + dev_err(dev, "failed to check calibration result: %d\n", > + retval); > + else if (val[0] == 0) > + break; /* calibration done */ > + > + } while (--tries); > + > + if (tries == 0) { > + dev_err(dev, "failed to calibrate. Timeout.\n"); > + retval = -ETIMEDOUT; > + } > + > +out_disable_calibrate: > + data->mode &= ~ETP_ENABLE_CALIBRATE; > + error = data->ops->set_mode(data->client, data->mode); > + if (error) { > + dev_err(dev, "failed to disable calibration mode: %d\n", > + error); > + if (!retval) > + retval = error; > + } > +out: > + enable_irq(client->irq); > + mutex_unlock(&data->sysfs_mutex); > + return retval ?: count; > +} > + > +static ssize_t elan_sysfs_read_mode(struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct elan_tp_data *data = dev_get_drvdata(dev); > + int error; > + enum tp_mode mode; > + > + error = mutex_lock_interruptible(&data->sysfs_mutex); > + if (error) > + return error; > + > + error = data->ops->iap_get_mode(data->client, &mode); > + > + mutex_unlock(&data->sysfs_mutex); > + > + if (error) > + return error; > + > + return sprintf(buf, "%d\n", (int)mode); > +} > + > +static DEVICE_ATTR(product_id, S_IRUGO, elan_sysfs_read_product_id, NULL); > +static DEVICE_ATTR(firmware_version, S_IRUGO, elan_sysfs_read_fw_ver, NULL); > +static DEVICE_ATTR(sample_version, S_IRUGO, elan_sysfs_read_sm_ver, NULL); > +static DEVICE_ATTR(iap_version, S_IRUGO, elan_sysfs_read_iap_ver, NULL); > +static DEVICE_ATTR(fw_checksum, S_IRUGO, elan_sysfs_read_fw_checksum, NULL); > +static DEVICE_ATTR(mode, S_IRUGO, elan_sysfs_read_mode, NULL); > +static DEVICE_ATTR(update_fw, S_IWUSR, NULL, elan_sysfs_update_fw); > + > +static DEVICE_ATTR_WO(calibrate); > + > +static struct attribute *elan_sysfs_entries[] = { > + &dev_attr_product_id.attr, > + &dev_attr_firmware_version.attr, > + &dev_attr_sample_version.attr, > + &dev_attr_iap_version.attr, > + &dev_attr_fw_checksum.attr, > + &dev_attr_calibrate.attr, > + &dev_attr_mode.attr, > + &dev_attr_update_fw.attr, > + NULL, > +}; > + > +static const struct attribute_group elan_sysfs_group = { > + .attrs = elan_sysfs_entries, > +}; > + > +static ssize_t acquire_store(struct device *dev, struct device_attribute *attr, > + const char *buf, size_t count) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct elan_tp_data *data = i2c_get_clientdata(client); > + int error; > + int retval; > + > + retval = mutex_lock_interruptible(&data->sysfs_mutex); > + if (retval) > + return retval; > + > + disable_irq(client->irq); > + > + data->baseline_ready = false; > + > + data->mode |= ETP_ENABLE_CALIBRATE; > + retval = data->ops->set_mode(data->client, data->mode); > + if (retval) { > + dev_err(dev, "Failed to enable calibration mode to get baseline: %d\n", > + retval); > + goto out; > + } > + > + msleep(250); > + > + retval = data->ops->get_baseline_data(data->client, true, > + &data->max_baseline); > + if (retval) { > + dev_err(dev, "Failed to read max baseline form device: %d\n", > + retval); > + goto out_disable_calibrate; > + } > + > + retval = data->ops->get_baseline_data(data->client, false, > + &data->min_baseline); > + if (retval) { > + dev_err(dev, "Failed to read min baseline form device: %d\n", > + retval); > + goto out_disable_calibrate; > + } > + > + data->baseline_ready = true; > + > +out_disable_calibrate: > + data->mode &= ~ETP_ENABLE_CALIBRATE; > + error = data->ops->set_mode(data->client, data->mode); > + if (error) { > + dev_err(dev, "Failed to disable calibration mode after acquiring baseline: %d\n", > + error); > + if (!retval) > + retval = error; > + } > +out: > + enable_irq(client->irq); > + mutex_unlock(&data->sysfs_mutex); > + return retval ?: count; > +} > + > +static ssize_t min_show(struct device *dev, > + struct device_attribute *attr, char *buf) > +{ > + struct elan_tp_data *data = dev_get_drvdata(dev); > + int retval; > + > + retval = mutex_lock_interruptible(&data->sysfs_mutex); > + if (retval) > + return retval; > + > + if (!data->baseline_ready) { > + retval = -ENODATA; > + goto out; > + } > + > + retval = snprintf(buf, PAGE_SIZE, "%d", data->min_baseline); > + > +out: > + mutex_unlock(&data->sysfs_mutex); > + return retval; > +} > + > +static ssize_t max_show(struct device *dev, > + struct device_attribute *attr, char *buf) > +{ > + struct elan_tp_data *data = dev_get_drvdata(dev); > + int retval; > + > + retval = mutex_lock_interruptible(&data->sysfs_mutex); > + if (retval) > + return retval; > + > + if (!data->baseline_ready) { > + retval = -ENODATA; > + goto out; > + } > + > + retval = snprintf(buf, PAGE_SIZE, "%d", data->max_baseline); > + > +out: > + mutex_unlock(&data->sysfs_mutex); > + return retval; > +} > + > + > +static DEVICE_ATTR_WO(acquire); > +static DEVICE_ATTR_RO(min); > +static DEVICE_ATTR_RO(max); > + > +static struct attribute *elan_baseline_sysfs_entries[] = { > + &dev_attr_acquire.attr, > + &dev_attr_min.attr, > + &dev_attr_max.attr, > + NULL, > +}; > + > +static const struct attribute_group elan_baseline_sysfs_group = { > + .name = "baseline", > + .attrs = elan_baseline_sysfs_entries, > +}; > + > +static const struct attribute_group *elan_sysfs_groups[] = { > + &elan_sysfs_group, > + &elan_baseline_sysfs_group, > + NULL > +}; > + > +/* > + ****************************************************************** > + * Elan isr functions > + ****************************************************************** > + */ > +static void elan_report_contact(struct elan_tp_data *data, > + int contact_num, bool contact_valid, > + u8 *finger_data) > +{ > + struct input_dev *input = data->input; > + unsigned int pos_x, pos_y; > + unsigned int pressure, mk_x, mk_y; > + unsigned int area_x, area_y, major, minor, new_pressure; > + > + > + if (contact_valid) { > + pos_x = ((finger_data[0] & 0xf0) << 4) | > + finger_data[1]; > + pos_y = ((finger_data[0] & 0x0f) << 8) | > + finger_data[2]; > + mk_x = (finger_data[3] & 0x0f); > + mk_y = (finger_data[3] >> 4); > + pressure = finger_data[4]; > + > + if (pos_x > data->max_x || pos_y > data->max_y) { > + dev_dbg(input->dev.parent, > + "[%d] x=%d y=%d over max (%d, %d)", > + contact_num, pos_x, pos_y, > + data->max_x, data->max_y); > + return; > + } > + > + /* > + * To avoid treating large finger as palm, let's reduce the > + * width x and y per trace. > + */ > + area_x = mk_x * (data->width_x - ETP_FWIDTH_REDUCE); > + area_y = mk_y * (data->width_y - ETP_FWIDTH_REDUCE); > + > + major = max(area_x, area_y); > + minor = min(area_x, area_y); > + > + new_pressure = pressure + ETP_PRESSURE_OFFSET; > + if (new_pressure > ETP_MAX_PRESSURE) > + new_pressure = ETP_MAX_PRESSURE; > + > + input_mt_slot(input, contact_num); > + input_mt_report_slot_state(input, MT_TOOL_FINGER, true); > + input_report_abs(input, ABS_MT_POSITION_X, pos_x); > + input_report_abs(input, ABS_MT_POSITION_Y, data->max_y - pos_y); > + input_report_abs(input, ABS_MT_PRESSURE, new_pressure); > + input_report_abs(input, ABS_TOOL_WIDTH, mk_x); > + input_report_abs(input, ABS_MT_TOUCH_MAJOR, major); > + input_report_abs(input, ABS_MT_TOUCH_MINOR, minor); > + } else { > + input_mt_slot(input, contact_num); > + input_mt_report_slot_state(input, MT_TOOL_FINGER, false); > + } > +} > + > +static void elan_report_absolute(struct elan_tp_data *data, u8 *packet) > +{ > + struct input_dev *input = data->input; > + u8 *finger_data = &packet[ETP_FINGER_DATA_OFFSET]; > + int i; > + u8 tp_info = packet[ETP_TOUCH_INFO_OFFSET]; > + bool contact_valid; > + > + for (i = 0; i < ETP_MAX_FINGERS; i++) { > + contact_valid = tp_info & (1U << (3 + i)); > + elan_report_contact(data, i, contact_valid, finger_data); > + > + if (contact_valid) > + finger_data += ETP_FINGER_DATA_LEN; > + } > + > + input_report_key(input, BTN_LEFT, tp_info & 0x01); > + input_mt_report_pointer_emulation(input, true); > + input_sync(input); > +} > + > +static irqreturn_t elan_isr(int irq, void *dev_id) > +{ > + struct elan_tp_data *data = dev_id; > + struct device *dev = &data->client->dev; > + int error; > + u8 report[ETP_MAX_REPORT_LEN]; > + > + /* > + * When device is connected to i2c bus, when all IAP page writes > + * complete, the driver will receive interrupt and must read > + * 0000 to confirm that IAP is finished. > + */ > + if (data->in_fw_update) { > + complete(&data->fw_completion); > + goto out; > + } > + > + error = data->ops->get_report(data->client, report); > + if (error) > + goto out; > + > + if (report[ETP_REPORT_ID_OFFSET] != ETP_REPORT_ID) > + dev_err(dev, "invalid report id data (%x)\n", > + report[ETP_REPORT_ID_OFFSET]); > + else > + elan_report_absolute(data, report); > + > +out: > + return IRQ_HANDLED; > +} > + > +/* > + ****************************************************************** > + * Elan initialization functions > + ****************************************************************** > + */ > +static int elan_setup_input_device(struct elan_tp_data *data) > +{ > + struct device *dev = &data->client->dev; > + struct input_dev *input; > + unsigned int max_width = max(data->width_x, data->width_y); > + unsigned int min_width = min(data->width_x, data->width_y); > + int error; > + > + input = devm_input_allocate_device(dev); > + if (!input) > + return -ENOMEM; > + > + input->name = "Elan Touchpad"; > + input->id.bustype = BUS_I2C; > + input_set_drvdata(input, data); > + > + error = input_mt_init_slots(input, ETP_MAX_FINGERS, > + INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED); > + if (error) { > + dev_err(dev, "failed to initialize MT slots: %d\n", error); > + return error; > + } > + > + __set_bit(EV_ABS, input->evbit); > + __set_bit(INPUT_PROP_POINTER, input->propbit); > + __set_bit(INPUT_PROP_BUTTONPAD, input->propbit); > + __set_bit(BTN_LEFT, input->keybit); > + > + /* Set up ST parameters */ > + input_set_abs_params(input, ABS_X, 0, data->max_x, 0, 0); > + input_set_abs_params(input, ABS_Y, 0, data->max_y, 0, 0); > + input_abs_set_res(input, ABS_X, data->x_res); > + input_abs_set_res(input, ABS_Y, data->y_res); > + input_set_abs_params(input, ABS_PRESSURE, 0, ETP_MAX_PRESSURE, 0, 0); > + input_set_abs_params(input, ABS_TOOL_WIDTH, 0, ETP_FINGER_WIDTH, 0, 0); > + > + /* And MT parameters */ > + input_set_abs_params(input, ABS_MT_POSITION_X, 0, data->max_x, 0, 0); > + input_set_abs_params(input, ABS_MT_POSITION_Y, 0, data->max_y, 0, 0); > + input_abs_set_res(input, ABS_MT_POSITION_X, data->x_res); > + input_abs_set_res(input, ABS_MT_POSITION_Y, data->y_res); > + input_set_abs_params(input, ABS_MT_PRESSURE, 0, > + ETP_MAX_PRESSURE, 0, 0); > + input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, > + ETP_FINGER_WIDTH * max_width, 0, 0); > + input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, > + ETP_FINGER_WIDTH * min_width, 0, 0); > + > + data->input = input; > + > + return 0; > +} > + > +static void elan_disable_regulator(void *_data) > +{ > + struct elan_tp_data *data = _data; > + > + regulator_disable(data->vcc); > +} > + > +static void elan_remove_sysfs_groups(void *_data) > +{ > + struct elan_tp_data *data = _data; > + > + sysfs_remove_groups(&data->client->dev.kobj, elan_sysfs_groups); > +} > + > +static int elan_probe(struct i2c_client *client, > + const struct i2c_device_id *dev_id) > +{ > + const struct elan_transport_ops *transport_ops; > + struct device *dev = &client->dev; > + struct elan_tp_data *data; > + unsigned long irqflags; > + int error; > + > + if (IS_ENABLED(CONFIG_MOUSE_ELAN_I2C_I2C) && > + i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { > + transport_ops = &elan_i2c_ops; > + } else if (IS_ENABLED(CONFIG_MOUSE_ELAN_I2C_SMBUS) && > + i2c_check_functionality(client->adapter, > + I2C_FUNC_SMBUS_BYTE_DATA | > + I2C_FUNC_SMBUS_BLOCK_DATA | > + I2C_FUNC_SMBUS_I2C_BLOCK)) { > + transport_ops = &elan_smbus_ops; > + } else { > + dev_err(dev, "not a supported I2C/SMBus adapter\n"); > + return -EIO; > + } > + > + data = devm_kzalloc(&client->dev, sizeof(struct elan_tp_data), > + GFP_KERNEL); > + if (!data) > + return -ENOMEM; > + > + data->ops = transport_ops; > + data->client = client; > + init_completion(&data->fw_completion); > + mutex_init(&data->sysfs_mutex); > + > + data->vcc = devm_regulator_get(&client->dev, "vcc"); > + if (IS_ERR(data->vcc)) { > + error = PTR_ERR(data->vcc); > + if (error != -EPROBE_DEFER) > + dev_err(&client->dev, > + "Failed to get 'vcc' regulator: %d\n", > + error); > + return error; > + } > + > + error = regulator_enable(data->vcc); > + if (error) { > + dev_err(&client->dev, > + "Failed to enable regulator: %d\n", error); > + return error; > + } > + > + error = devm_add_action(&client->dev, > + elan_disable_regulator, data); > + if (error) { > + regulator_disable(data->vcc); > + dev_err(&client->dev, > + "Failed to add disable regulator action: %d\n", > + error); > + return error; > + } > + > + /* Initialize the touchpad. */ > + error = elan_initialize(data); > + if (error) > + return error; > + > + error = elan_query_device_info(data); > + if (error) > + return error; > + > + error = elan_query_device_parameters(data); > + if (error) > + return error; > + > + dev_dbg(&client->dev, > + "Elan Touchpad Information:\n" > + " Module product ID: 0x%04x\n" > + " Firmware Version: 0x%04x\n" > + " Sample Version: 0x%04x\n" > + " IAP Version: 0x%04x\n" > + " Max ABS X,Y: %d,%d\n" > + " Width X,Y: %d,%d\n" > + " Resolution X,Y: %d,%d (dots/mm)\n", > + data->product_id, > + data->fw_version, > + data->sm_version, > + data->iap_version, > + data->max_x, data->max_y, > + data->width_x, data->width_y, > + data->x_res, data->y_res); > + > + /* Set up input device properties based on queried parameters. */ > + error = elan_setup_input_device(data); > + if (error) > + return error; > + > + /* > + * Systems using device tree should set up interrupt via DTS, > + * the rest will use the default falling edge interrupts. > + */ > + irqflags = client->dev.of_node ? 0 : IRQF_TRIGGER_FALLING; > + > + error = devm_request_threaded_irq(&client->dev, client->irq, > + NULL, elan_isr, > + irqflags | IRQF_ONESHOT, > + client->name, data); > + if (error) { > + dev_err(&client->dev, "cannot register irq=%d\n", client->irq); > + return error; > + } > + > + error = sysfs_create_groups(&client->dev.kobj, elan_sysfs_groups); > + if (error) { > + dev_err(&client->dev, "failed to create sysfs attributes: %d\n", > + error); > + return error; > + } > + > + error = devm_add_action(&client->dev, > + elan_remove_sysfs_groups, data); > + if (error) { > + elan_remove_sysfs_groups(data); > + dev_err(&client->dev, > + "Failed to add sysfs cleanup action: %d\n", > + error); > + return error; > + } > + > + error = input_register_device(data->input); > + if (error) { > + dev_err(&client->dev, "failed to register input device: %d\n", > + error); > + return error; > + } > + > + /* > + * Systems using device tree should set up wakeup via DTS, > + * the rest will configure device as wakeup source by default. > + */ > + if (!client->dev.of_node) > + device_init_wakeup(&client->dev, true); > + > + i2c_set_clientdata(client, data); > + > + return 0; > +} > + > +static int __maybe_unused elan_suspend(struct device *dev) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct elan_tp_data *data = i2c_get_clientdata(client); > + int ret; > + > + /* > + * We are taking the mutex to make sure sysfs operations are > + * complete before we attempt to bring the device into low[er] > + * power mode. > + */ > + ret = mutex_lock_interruptible(&data->sysfs_mutex); > + if (ret) > + return ret; > + > + disable_irq(client->irq); > + > + if (device_may_wakeup(dev)) { > + ret = elan_sleep(data); > + /* Enable wake from IRQ */ > + data->irq_wake = (enable_irq_wake(client->irq) == 0); > + } else { > + ret = elan_disable_power(data); > + } > + > + mutex_unlock(&data->sysfs_mutex); > + return ret; > +} > + > +static int __maybe_unused elan_resume(struct device *dev) > +{ > + struct i2c_client *client = to_i2c_client(dev); > + struct elan_tp_data *data = i2c_get_clientdata(client); > + int error; > + > + if (device_may_wakeup(dev) && data->irq_wake) { > + disable_irq_wake(client->irq); > + data->irq_wake = false; > + } > + > + error = elan_enable_power(data); > + if (error) > + dev_err(dev, "power up when resuming failed: %d\n", error); > + > + error = elan_initialize(data); > + if (error) > + dev_err(dev, "initialize when resuming failed: %d\n", error); > + > + enable_irq(data->client->irq); > + > + return 0; > +} > + > +static SIMPLE_DEV_PM_OPS(elan_pm_ops, elan_suspend, elan_resume); > + > +static const struct i2c_device_id elan_id[] = { > + { DRIVER_NAME, 0 }, > + { }, > +}; > +MODULE_DEVICE_TABLE(i2c, elan_id); > + > +#ifdef CONFIG_ACPI > +static const struct acpi_device_id elan_acpi_id[] = { > + { "ELAN0000", 0 }, > + { } > +}; > +MODULE_DEVICE_TABLE(acpi, elan_acpi_id); > +#endif > + > +#ifdef CONFIG_OF > +static const struct of_device_id elan_of_match[] = { > + { .compatible = "elan,i2c_touchpad" }, > + { /* sentinel */ } > +}; > +MODULE_DEVICE_TABLE(of, elan_of_match); > +#endif > + > +static struct i2c_driver elan_driver = { > + .driver = { > + .name = DRIVER_NAME, > + .owner = THIS_MODULE, > + .pm = &elan_pm_ops, > + .acpi_match_table = ACPI_PTR(elan_acpi_id), > + .of_match_table = of_match_ptr(elan_of_match), > + }, > + .probe = elan_probe, > + .id_table = elan_id, > +}; > + > +module_i2c_driver(elan_driver); > + > +MODULE_AUTHOR("Duson Lin "); > +MODULE_DESCRIPTION("Elan I2C/SMBus Touchpad driver"); > +MODULE_LICENSE("GPL"); > +MODULE_VERSION(ELAN_DRIVER_VERSION); > diff --git a/drivers/input/mouse/elan_i2c_i2c.c b/drivers/input/mouse/elan_i2c_i2c.c > new file mode 100644 > index 0000000..047b257 > --- /dev/null > +++ b/drivers/input/mouse/elan_i2c_i2c.c > @@ -0,0 +1,612 @@ > +/* > + * Elan I2C/SMBus Touchpad driver - I2C interface > + * > + * Copyright (c) 2013 ELAN Microelectronics Corp. > + * > + * Author: 林政維 (Duson Lin) > + * Version: 1.5.5 > + * > + * Based on cyapa driver: > + * copyright (c) 2011-2012 Cypress Semiconductor, Inc. > + * copyright (c) 2011-2012 Google, Inc. > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms of the GNU General Public License version 2 as published > + * by the Free Software Foundation. > + * > + * Trademarks are the property of their respective owners. > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include "elan_i2c.h" > + > +/* Elan i2c commands */ > +#define ETP_I2C_RESET 0x0100 > +#define ETP_I2C_WAKE_UP 0x0800 > +#define ETP_I2C_SLEEP 0x0801 > +#define ETP_I2C_DESC_CMD 0x0001 > +#define ETP_I2C_REPORT_DESC_CMD 0x0002 > +#define ETP_I2C_STAND_CMD 0x0005 > +#define ETP_I2C_UNIQUEID_CMD 0x0101 > +#define ETP_I2C_FW_VERSION_CMD 0x0102 > +#define ETP_I2C_SM_VERSION_CMD 0x0103 > +#define ETP_I2C_XY_TRACENUM_CMD 0x0105 > +#define ETP_I2C_MAX_X_AXIS_CMD 0x0106 > +#define ETP_I2C_MAX_Y_AXIS_CMD 0x0107 > +#define ETP_I2C_RESOLUTION_CMD 0x0108 > +#define ETP_I2C_IAP_VERSION_CMD 0x0110 > +#define ETP_I2C_SET_CMD 0x0300 > +#define ETP_I2C_POWER_CMD 0x0307 > +#define ETP_I2C_FW_CHECKSUM_CMD 0x030F > +#define ETP_I2C_IAP_CTRL_CMD 0x0310 > +#define ETP_I2C_IAP_CMD 0x0311 > +#define ETP_I2C_IAP_RESET_CMD 0x0314 > +#define ETP_I2C_IAP_CHECKSUM_CMD 0x0315 > +#define ETP_I2C_CALIBRATE_CMD 0x0316 > +#define ETP_I2C_MAX_BASELINE_CMD 0x0317 > +#define ETP_I2C_MIN_BASELINE_CMD 0x0318 > + > +#define ETP_I2C_REPORT_LEN 34 > +#define ETP_I2C_DESC_LENGTH 30 > +#define ETP_I2C_REPORT_DESC_LENGTH 158 > +#define ETP_I2C_INF_LENGTH 2 > +#define ETP_I2C_IAP_PASSWORD 0x1EA5 > +#define ETP_I2C_IAP_RESET 0xF0F0 > +#define ETP_I2C_MAIN_MODE_ON (1 << 9) > +#define ETP_I2C_IAP_REG_L 0x01 > +#define ETP_I2C_IAP_REG_H 0x06 > + > +static int elan_i2c_read_block(struct i2c_client *client, > + u16 reg, u8 *val, u16 len) > +{ > + __le16 buf[] = { > + cpu_to_le16(reg), > + }; > + struct i2c_msg msgs[] = { > + { > + .addr = client->addr, > + .flags = client->flags & I2C_M_TEN, > + .len = sizeof(buf), > + .buf = (u8 *)buf, > + }, > + { > + .addr = client->addr, > + .flags = (client->flags & I2C_M_TEN) | I2C_M_RD, > + .len = len, > + .buf = val, > + } > + }; > + int ret; > + > + ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); > + return ret == ARRAY_SIZE(msgs) ? 0 : (ret < 0 ? ret : -EIO); > +} > + > +static int elan_i2c_read_cmd(struct i2c_client *client, u16 reg, u8 *val) > +{ > + int retval; > + > + retval = elan_i2c_read_block(client, reg, val, ETP_I2C_INF_LENGTH); > + if (retval < 0) { > + dev_err(&client->dev, "reading cmd (0x%04x) fail.\n", reg); > + return retval; > + } > + > + return 0; > +} > + > +static int elan_i2c_write_cmd(struct i2c_client *client, u16 reg, u16 cmd) > +{ > + __le16 buf[] = { > + cpu_to_le16(reg), > + cpu_to_le16(cmd), > + }; > + struct i2c_msg msg = { > + .addr = client->addr, > + .flags = client->flags & I2C_M_TEN, > + .len = sizeof(buf), > + .buf = (u8 *)buf, > + }; > + int ret; > + > + ret = i2c_transfer(client->adapter, &msg, 1); > + return ret == 1 ? 0 : (ret < 0 ? ret : -EIO); > +} > + > +static int elan_i2c_initialize(struct i2c_client *client) > +{ > + struct device *dev = &client->dev; > + int error; > + u8 val[256]; > + > + error = elan_i2c_write_cmd(client, ETP_I2C_STAND_CMD, ETP_I2C_RESET); > + if (error) { > + dev_err(dev, "device reset failed: %d\n", error); > + return error; > + } > + > + /* Wait for the device to reset */ > + msleep(100); > + > + /* get reset acknowledgement 0000 */ > + error = i2c_master_recv(client, val, ETP_I2C_INF_LENGTH); > + if (error < 0) { > + dev_err(dev, "failed to read reset response: %d\n", error); > + return error; > + } > + > + error = elan_i2c_read_block(client, ETP_I2C_DESC_CMD, > + val, ETP_I2C_DESC_LENGTH); > + if (error) { > + dev_err(dev, "cannot get device descriptor: %d\n", error); > + return error; > + } > + > + error = elan_i2c_read_block(client, ETP_I2C_REPORT_DESC_CMD, > + val, ETP_I2C_REPORT_DESC_LENGTH); > + if (error) { > + dev_err(dev, "fetching report descriptor failed.: %d\n", error); > + return error; > + } > + > + return 0; > +} > + > +static int elan_i2c_sleep_control(struct i2c_client *client, bool sleep) > +{ > + return elan_i2c_write_cmd(client, ETP_I2C_STAND_CMD, > + sleep ? ETP_I2C_SLEEP : ETP_I2C_WAKE_UP); > +} > + > +static int elan_i2c_power_control(struct i2c_client *client, bool enable) > +{ > + u8 val[2]; > + u16 reg; > + int error; > + > + error = elan_i2c_read_cmd(client, ETP_I2C_POWER_CMD, val); > + if (error) { > + dev_err(&client->dev, > + "failed to read current power state: %d\n", > + error); > + return error; > + } > + > + reg = le16_to_cpup((__le16 *)val); > + if (enable) > + reg &= ~ETP_DISABLE_POWER; > + else > + reg |= ETP_DISABLE_POWER; > + > + error = elan_i2c_write_cmd(client, ETP_I2C_POWER_CMD, > + cpu_to_le16(reg)); > + if (error) { > + dev_err(&client->dev, > + "failed to write current power state: %d\n", > + error); > + return error; > + } > + > + return 0; > +} > + > +static int elan_i2c_set_mode(struct i2c_client *client, u8 mode) > +{ > + return elan_i2c_write_cmd(client, ETP_I2C_SET_CMD, mode); > +} > + > + > +static int elan_i2c_calibrate(struct i2c_client *client) > +{ > + return elan_i2c_write_cmd(client, ETP_I2C_CALIBRATE_CMD, 1); > +} > + > +static int elan_i2c_calibrate_result(struct i2c_client *client, u8 *val) > +{ > + return elan_i2c_read_block(client, ETP_I2C_CALIBRATE_CMD, val, 1); > +} > + > +static int elan_i2c_get_baseline_data(struct i2c_client *client, > + bool max_baseline, u8 *value) > +{ > + int error; > + u8 val[3]; > + > + error = elan_i2c_read_cmd(client, > + max_baseline ? ETP_I2C_MAX_BASELINE_CMD : > + ETP_I2C_MIN_BASELINE_CMD, > + val); > + if (error) > + return error; > + > + *value = le16_to_cpup((__le16 *)val); > + > + return 0; > +} > + > +static int elan_i2c_get_version(struct i2c_client *client, > + bool iap, u8 *version) > +{ > + int error; > + u8 val[3]; > + > + error = elan_i2c_read_cmd(client, > + iap ? ETP_I2C_IAP_VERSION_CMD : > + ETP_I2C_FW_VERSION_CMD, > + val); > + if (error) { > + dev_err(&client->dev, "failed to get %s version: %d\n", > + iap ? "IAP" : "FW", error); > + return error; > + } > + > + *version = val[0]; > + return 0; > +} > + > +static int elan_i2c_get_sm_version(struct i2c_client *client, u8 *version) > +{ > + int error; > + u8 val[3]; > + > + error = elan_i2c_read_cmd(client, ETP_I2C_SM_VERSION_CMD, val); > + if (error) { > + dev_err(&client->dev, "failed to get SM version: %d\n", error); > + return error; > + } > + > + *version = val[0]; > + return 0; > +} > + > +static int elan_i2c_get_product_id(struct i2c_client *client, u8 *id) > +{ > + int error; > + u8 val[3]; > + > + error = elan_i2c_read_cmd(client, ETP_I2C_UNIQUEID_CMD, val); > + if (error) { > + dev_err(&client->dev, "failed to get product ID: %d\n", error); > + return error; > + } > + > + *id = val[0]; > + return 0; > +} > + > +static int elan_i2c_get_checksum(struct i2c_client *client, > + bool iap, u16 *csum) > +{ > + int error; > + u8 val[3]; > + > + error = elan_i2c_read_cmd(client, > + iap ? ETP_I2C_IAP_CHECKSUM_CMD : > + ETP_I2C_FW_CHECKSUM_CMD, > + val); > + if (error) { > + dev_err(&client->dev, "failed to get %s checksum: %d\n", > + iap ? "IAP" : "FW", error); > + return error; > + } > + > + *csum = le16_to_cpup((__le16 *)val); > + return 0; > +} > + > +static int elan_i2c_get_max(struct i2c_client *client, > + unsigned int *max_x, unsigned int *max_y) > +{ > + int error; > + u8 val[3]; > + > + error = elan_i2c_read_cmd(client, ETP_I2C_MAX_X_AXIS_CMD, val); > + if (error) { > + dev_err(&client->dev, "failed to get X dimension: %d\n", error); > + return error; > + } > + > + *max_x = le16_to_cpup((__le16 *)val) & 0x0fff; > + > + error = elan_i2c_read_cmd(client, ETP_I2C_MAX_Y_AXIS_CMD, val); > + if (error) { > + dev_err(&client->dev, "failed to get Y dimension: %d\n", error); > + return error; > + } > + > + *max_y = le16_to_cpup((__le16 *)val) & 0x0fff; > + > + return 0; > +} > + > +static int elan_i2c_get_resolution(struct i2c_client *client, > + u8 *hw_res_x, u8 *hw_res_y) > +{ > + int error; > + u8 val[3]; > + > + error = elan_i2c_read_cmd(client, ETP_I2C_RESOLUTION_CMD, val); > + if (error) { > + dev_err(&client->dev, "failed to get resolution: %d\n", error); > + return error; > + } > + > + *hw_res_x = val[0]; > + *hw_res_y = val[1]; > + > + return 0; > +} > + > +static int elan_i2c_get_num_traces(struct i2c_client *client, > + unsigned int *x_traces, > + unsigned int *y_traces) > +{ > + int error; > + u8 val[3]; > + > + error = elan_i2c_read_cmd(client, ETP_I2C_XY_TRACENUM_CMD, val); > + if (error) { > + dev_err(&client->dev, "failed to get trace info: %d\n", error); > + return error; > + } > + > + *x_traces = val[0] - 1; > + *y_traces = val[1] - 1; > + > + return 0; > +} > + > +static int elan_i2c_iap_get_mode(struct i2c_client *client, enum tp_mode *mode) > +{ > + int error; > + u16 constant; > + u8 val[3]; > + > + error = elan_i2c_read_cmd(client, ETP_I2C_IAP_CTRL_CMD, val); > + if (error) { > + dev_err(&client->dev, > + "failed to read iap control register: %d\n", > + error); > + return error; > + } > + > + constant = le16_to_cpup((__le16 *)val); > + dev_dbg(&client->dev, "iap control reg: 0x%04x.\n", constant); > + > + *mode = (constant & ETP_I2C_MAIN_MODE_ON) ? MAIN_MODE : IAP_MODE; > + > + return 0; > +} > + > +static int elan_i2c_iap_reset(struct i2c_client *client) > +{ > + int error; > + > + error = elan_i2c_write_cmd(client, ETP_I2C_IAP_RESET_CMD, > + ETP_I2C_IAP_RESET); > + if (error) { > + dev_err(&client->dev, "cannot reset IC: %d\n", error); > + return error; > + } > + > + return 0; > +} > + > +static int elan_i2c_set_flash_key(struct i2c_client *client) > +{ > + int error; > + > + error = elan_i2c_write_cmd(client, ETP_I2C_IAP_CMD, > + ETP_I2C_IAP_PASSWORD); > + if (error) { > + dev_err(&client->dev, "cannot set flash key: %d\n", error); > + return error; > + } > + > + return 0; > +} > + > +static int elan_i2c_prepare_fw_update(struct i2c_client *client) > +{ > + struct device *dev = &client->dev; > + int error; > + enum tp_mode mode; > + u8 val[3]; > + u16 password; > + > + /* Get FW in which mode (IAP_MODE/MAIN_MODE) */ > + error = elan_i2c_iap_get_mode(client, &mode); > + if (error) > + return error; > + > + if (mode == IAP_MODE) { > + /* Reset IC */ > + error = elan_i2c_iap_reset(client); > + if (error) > + return error; > + > + msleep(30); > + } > + > + /* Set flash key*/ > + error = elan_i2c_set_flash_key(client); > + if (error) > + return error; > + > + /* Wait for F/W IAP initialization */ > + msleep(mode == MAIN_MODE ? 100 : 30); > + > + /* Check if we are in IAP mode or not */ > + error = elan_i2c_iap_get_mode(client, &mode); > + if (error) > + return error; > + > + if (mode == MAIN_MODE) { > + dev_err(dev, "wrong mode: %d\n", mode); > + return -EIO; > + } > + > + /* Set flash key again */ > + error = elan_i2c_set_flash_key(client); > + if (error) > + return error; > + > + /* Wait for F/W IAP initialization */ > + msleep(30); > + > + /* read back to check we actually enabled successfully. */ > + error = elan_i2c_read_cmd(client, ETP_I2C_IAP_CMD, val); > + if (error) { > + dev_err(dev, "cannot read iap password: %d\n", > + error); > + return error; > + } > + > + password = le16_to_cpup((__le16 *)val); > + if (password != ETP_I2C_IAP_PASSWORD) { > + dev_err(dev, "wrong iap password: 0x%X\n", password); > + return -EIO; > + } > + > + return 0; > +} > + > +static int elan_i2c_write_fw_block(struct i2c_client *client, > + const u8 *page, u16 checksum, int idx) > +{ > + struct device *dev = &client->dev; > + u8 page_store[ETP_FW_PAGE_SIZE + 4]; > + u8 val[3]; > + u16 result; > + int ret, error; > + > + page_store[0] = ETP_I2C_IAP_REG_L; > + page_store[1] = ETP_I2C_IAP_REG_H; > + memcpy(&page_store[2], page, ETP_FW_PAGE_SIZE); > + /* recode checksum at last two bytes */ > + put_unaligned_le16(checksum, &page_store[ETP_FW_PAGE_SIZE + 2]); > + > + ret = i2c_master_send(client, page_store, sizeof(page_store)); > + if (ret != sizeof(page_store)) { > + error = ret < 0 ? ret : -EIO; > + dev_err(dev, "Failed to write page %d: %d\n", idx, error); > + return error; > + } > + > + /* Wait for F/W to update one page ROM data. */ > + msleep(20); > + > + error = elan_i2c_read_cmd(client, ETP_I2C_IAP_CTRL_CMD, val); > + if (error) { > + dev_err(dev, "Failed to read IAP write result: %d\n", error); > + return error; > + } > + > + result = le16_to_cpup((__le16 *)val); > + if (result & (ETP_FW_IAP_PAGE_ERR | ETP_FW_IAP_INTF_ERR)) { > + dev_err(dev, "IAP reports failed write: %04hx\n", > + result); > + return -EIO; > + } > + > + return 0; > +} > + > +static int elan_i2c_finish_fw_update(struct i2c_client *client, > + struct completion *completion) > +{ > + struct device *dev = &client->dev; > + long ret; > + int error; > + int len; > + u8 buffer[ETP_I2C_INF_LENGTH]; > + > + reinit_completion(completion); > + enable_irq(client->irq); > + > + error = elan_i2c_write_cmd(client, ETP_I2C_STAND_CMD, ETP_I2C_RESET); > + if (!error) > + ret = wait_for_completion_interruptible_timeout(completion, > + msecs_to_jiffies(300)); > + disable_irq(client->irq); > + > + if (error) { > + dev_err(dev, "device reset failed: %d\n", error); > + return error; > + } else if (ret == 0) { > + dev_err(dev, "timeout waiting for device reset\n"); > + return -ETIMEDOUT; > + } else if (ret < 0) { > + error = ret; > + dev_err(dev, "error waiting for device reset: %d\n", error); > + return error; > + } > + > + len = i2c_master_recv(client, buffer, ETP_I2C_INF_LENGTH); > + if (len != ETP_I2C_INF_LENGTH) { > + error = len < 0 ? len : -EIO; > + dev_err(dev, "failed to read INT signal: %d (%d)\n", > + error, len); > + return error; > + } > + > + return 0; > +} > + > +static int elan_i2c_get_report(struct i2c_client *client, u8 *report) > +{ > + int len; > + > + len = i2c_master_recv(client, report, ETP_I2C_REPORT_LEN); > + if (len < 0) { > + dev_err(&client->dev, "failed to read report data: %d\n", len); > + return len; > + } > + > + if (len != ETP_I2C_REPORT_LEN) { > + dev_err(&client->dev, > + "wrong report length (%d vs %d expected)\n", > + len, ETP_I2C_REPORT_LEN); > + return -EIO; > + } > + > + return 0; > +} > + > +const struct elan_transport_ops elan_i2c_ops = { > + .initialize = elan_i2c_initialize, > + .sleep_control = elan_i2c_sleep_control, > + .power_control = elan_i2c_power_control, > + .set_mode = elan_i2c_set_mode, > + > + .calibrate = elan_i2c_calibrate, > + .calibrate_result = elan_i2c_calibrate_result, > + > + .get_baseline_data = elan_i2c_get_baseline_data, > + > + .get_version = elan_i2c_get_version, > + .get_sm_version = elan_i2c_get_sm_version, > + .get_product_id = elan_i2c_get_product_id, > + .get_checksum = elan_i2c_get_checksum, > + > + .get_max = elan_i2c_get_max, > + .get_resolution = elan_i2c_get_resolution, > + .get_num_traces = elan_i2c_get_num_traces, > + > + .iap_get_mode = elan_i2c_iap_get_mode, > + .iap_reset = elan_i2c_iap_reset, > + > + .prepare_fw_update = elan_i2c_prepare_fw_update, > + .write_fw_block = elan_i2c_write_fw_block, > + .finish_fw_update = elan_i2c_finish_fw_update, > + > + .get_report = elan_i2c_get_report, > +}; > diff --git a/drivers/input/mouse/elan_i2c_smbus.c b/drivers/input/mouse/elan_i2c_smbus.c > new file mode 100644 > index 0000000..e58d82b > --- /dev/null > +++ b/drivers/input/mouse/elan_i2c_smbus.c > @@ -0,0 +1,514 @@ > +/* > + * Elan I2C/SMBus Touchpad driver - SMBus interface > + * > + * Copyright (c) 2013 ELAN Microelectronics Corp. > + * > + * Author: 林政維 (Duson Lin) > + * Version: 1.5.5 > + * > + * Based on cyapa driver: > + * copyright (c) 2011-2012 Cypress Semiconductor, Inc. > + * copyright (c) 2011-2012 Google, Inc. > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms of the GNU General Public License version 2 as published > + * by the Free Software Foundation. > + * > + * Trademarks are the property of their respective owners. > + */ > + > +#include > +#include > +#include > +#include > + > +#include "elan_i2c.h" > + > +/* Elan SMbus commands */ > +#define ETP_SMBUS_IAP_CMD 0x00 > +#define ETP_SMBUS_ENABLE_TP 0x20 > +#define ETP_SMBUS_SLEEP_CMD 0x21 > +#define ETP_SMBUS_IAP_PASSWORD_WRITE 0x29 > +#define ETP_SMBUS_IAP_PASSWORD_READ 0x80 > +#define ETP_SMBUS_WRITE_FW_BLOCK 0x2A > +#define ETP_SMBUS_IAP_RESET_CMD 0x2B > +#define ETP_SMBUS_RANGE_CMD 0xA0 > +#define ETP_SMBUS_FW_VERSION_CMD 0xA1 > +#define ETP_SMBUS_XY_TRACENUM_CMD 0xA2 > +#define ETP_SMBUS_SM_VERSION_CMD 0xA3 > +#define ETP_SMBUS_UNIQUEID_CMD 0xA3 > +#define ETP_SMBUS_RESOLUTION_CMD 0xA4 > +#define ETP_SMBUS_HELLOPACKET_CMD 0xA7 > +#define ETP_SMBUS_PACKET_QUERY 0xA8 > +#define ETP_SMBUS_IAP_VERSION_CMD 0xAC > +#define ETP_SMBUS_IAP_CTRL_CMD 0xAD > +#define ETP_SMBUS_IAP_CHECKSUM_CMD 0xAE > +#define ETP_SMBUS_FW_CHECKSUM_CMD 0xAF > +#define ETP_SMBUS_MAX_BASELINE_CMD 0xC3 > +#define ETP_SMBUS_MIN_BASELINE_CMD 0xC4 > +#define ETP_SMBUS_CALIBRATE_QUERY 0xC5 > + > +#define ETP_SMBUS_REPORT_LEN 32 > +#define ETP_SMBUS_REPORT_OFFSET 2 > +#define ETP_SMBUS_HELLOPACKET_LEN 5 > +#define ETP_SMBUS_IAP_PASSWORD 0x1234 > +#define ETP_SMBUS_IAP_MODE_ON (1 << 6) > + > +static int elan_smbus_initialize(struct i2c_client *client) > +{ > + u8 check[ETP_SMBUS_HELLOPACKET_LEN] = { 0x55, 0x55, 0x55, 0x55, 0x55 }; > + u8 values[ETP_SMBUS_HELLOPACKET_LEN] = { 0, 0, 0, 0, 0 }; > + int len, error; > + > + /* Get hello packet */ > + len = i2c_smbus_read_block_data(client, > + ETP_SMBUS_HELLOPACKET_CMD, values); > + if (len != ETP_SMBUS_HELLOPACKET_LEN) { > + dev_err(&client->dev, "hello packet length fail: %d\n", len); > + error = len < 0 ? len : -EIO; > + return error; > + } > + > + /* compare hello packet */ > + if (memcmp(values, check, ETP_SMBUS_HELLOPACKET_LEN)) { > + dev_err(&client->dev, "hello packet fail [%*px]\n", > + ETP_SMBUS_HELLOPACKET_LEN, values); > + return -ENXIO; > + } > + > + /* enable tp */ > + error = i2c_smbus_write_byte(client, ETP_SMBUS_ENABLE_TP); > + if (error) { > + dev_err(&client->dev, "failed to enable touchpad: %d\n", error); > + return error; > + } > + > + return 0; > +} > + > +static int elan_smbus_set_mode(struct i2c_client *client, u8 mode) > +{ > + u8 cmd[4] = { 0x00, 0x07, 0x00, mode }; > + > + return i2c_smbus_write_block_data(client, ETP_SMBUS_IAP_CMD, > + sizeof(cmd), cmd); > +} > + > +static int elan_smbus_sleep_control(struct i2c_client *client, bool sleep) > +{ > + if (sleep) > + return i2c_smbus_write_byte(client, ETP_SMBUS_SLEEP_CMD); > + else > + return 0; /* XXX should we send ETP_SMBUS_ENABLE_TP here? */ > +} > + > +static int elan_smbus_power_control(struct i2c_client *client, bool enable) > +{ > + return 0; /* A no-op */ > +} > + > +static int elan_smbus_calibrate(struct i2c_client *client) > +{ > + u8 cmd[4] = { 0x00, 0x08, 0x00, 0x01 }; > + > + return i2c_smbus_write_block_data(client, ETP_SMBUS_IAP_CMD, > + sizeof(cmd), cmd); > +} > + > +static int elan_smbus_calibrate_result(struct i2c_client *client, u8 *val) > +{ > + int error; > + > + error = i2c_smbus_read_block_data(client, > + ETP_SMBUS_CALIBRATE_QUERY, val); > + if (error < 0) > + return error; > + > + return 0; > +} > + > +static int elan_smbus_get_baseline_data(struct i2c_client *client, > + bool max_baseline, u8 *value) > +{ > + int error; > + u8 val[3]; > + > + error = i2c_smbus_read_block_data(client, > + max_baseline ? > + ETP_SMBUS_MAX_BASELINE_CMD : > + ETP_SMBUS_MIN_BASELINE_CMD, > + val); > + if (error < 0) > + return error; > + > + *value = be16_to_cpup((__be16 *)val); > + > + return 0; > +} > + > +static int elan_smbus_get_version(struct i2c_client *client, > + bool iap, u8 *version) > +{ > + int error; > + u8 val[3]; > + > + error = i2c_smbus_read_block_data(client, > + iap ? ETP_SMBUS_IAP_VERSION_CMD : > + ETP_SMBUS_FW_VERSION_CMD, > + val); > + if (error < 0) { > + dev_err(&client->dev, "failed to get %s version: %d\n", > + iap ? "IAP" : "FW", error); > + return error; > + } > + > + *version = val[2]; > + return 0; > +} > + > +static int elan_smbus_get_sm_version(struct i2c_client *client, u8 *version) > +{ > + int error; > + u8 val[3]; > + > + error = i2c_smbus_read_block_data(client, > + ETP_SMBUS_SM_VERSION_CMD, val); > + if (error < 0) { > + dev_err(&client->dev, "failed to get SM version: %d\n", error); > + return error; > + } > + > + *version = val[0]; /* XXX Why 0 and not 2 as in IAP/FW versions? */ > + return 0; > +} > + > +static int elan_smbus_get_product_id(struct i2c_client *client, u8 *id) > +{ > + int error; > + u8 val[3]; > + > + error = i2c_smbus_read_block_data(client, > + ETP_SMBUS_UNIQUEID_CMD, val); > + if (error < 0) { > + dev_err(&client->dev, "failed to get product ID: %d\n", error); > + return error; > + } > + > + *id = val[1]; > + return 0; > +} > + > +static int elan_smbus_get_checksum(struct i2c_client *client, > + bool iap, u16 *csum) > +{ > + int error; > + u8 val[3]; > + > + error = i2c_smbus_read_block_data(client, > + iap ? ETP_SMBUS_FW_CHECKSUM_CMD : > + ETP_SMBUS_IAP_CHECKSUM_CMD, > + val); > + if (error < 0) { > + dev_err(&client->dev, "failed to get %s checksum: %d\n", > + iap ? "IAP" : "FW", error); > + return error; > + } > + > + *csum = be16_to_cpup((__be16 *)val); > + return 0; > +} > + > +static int elan_smbus_get_max(struct i2c_client *client, > + unsigned int *max_x, unsigned int *max_y) > +{ > + int error; > + u8 val[3]; > + > + error = i2c_smbus_read_block_data(client, ETP_SMBUS_RANGE_CMD, val); > + if (error) { > + dev_err(&client->dev, "failed to get dimensions: %d\n", error); > + return error; > + } > + > + *max_x = (0x0f & val[0]) << 8 | val[1]; > + *max_y = (0xf0 & val[0]) << 4 | val[2]; > + > + return 0; > +} > + > +static int elan_smbus_get_resolution(struct i2c_client *client, > + u8 *hw_res_x, u8 *hw_res_y) > +{ > + int error; > + u8 val[3]; > + > + error = i2c_smbus_read_block_data(client, > + ETP_SMBUS_RESOLUTION_CMD, val); > + if (error) { > + dev_err(&client->dev, "failed to get resolution: %d\n", error); > + return error; > + } > + > + *hw_res_x = val[1] & 0x0F; > + *hw_res_y = (val[1] & 0xF0) >> 4; > + > + return 0; > +} > + > +static int elan_smbus_get_num_traces(struct i2c_client *client, > + unsigned int *x_traces, > + unsigned int *y_traces) > +{ > + int error; > + u8 val[3]; > + > + error = i2c_smbus_read_block_data(client, > + ETP_SMBUS_XY_TRACENUM_CMD, val); > + if (error) { > + dev_err(&client->dev, "failed to get trace info: %d\n", error); > + return error; > + } > + > + *x_traces = val[1] - 1; > + *y_traces = val[2] - 1; > + > + return 0; > +} > + > +static int elan_smbus_iap_get_mode(struct i2c_client *client, > + enum tp_mode *mode) > +{ > + int error; > + u16 constant; > + u8 val[3]; > + > + error = i2c_smbus_read_block_data(client, ETP_SMBUS_IAP_CTRL_CMD, val); > + if (error < 0) { > + dev_err(&client->dev, "failed to read iap ctrol register: %d\n", > + error); > + return error; > + } > + > + constant = be16_to_cpup((__be16 *)val); > + dev_dbg(&client->dev, "iap control reg: 0x%04x.\n", constant); > + > + *mode = (constant & ETP_SMBUS_IAP_MODE_ON) ? IAP_MODE : MAIN_MODE; > + > + return 0; > +} > + > +static int elan_smbus_iap_reset(struct i2c_client *client) > +{ > + int error; > + > + error = i2c_smbus_write_byte(client, ETP_SMBUS_IAP_RESET_CMD); > + if (error) { > + dev_err(&client->dev, "cannot reset IC: %d\n", error); > + return error; > + } > + > + return 0; > +} > + > +static int elan_smbus_set_flash_key(struct i2c_client *client) > +{ > + int error; > + u8 cmd[4] = { 0x00, 0x0B, 0x00, 0x5A }; > + > + error = i2c_smbus_write_block_data(client, ETP_SMBUS_IAP_CMD, > + sizeof(cmd), cmd); > + if (error) { > + dev_err(&client->dev, "cannot set flash key: %d\n", error); > + return error; > + } > + > + return 0; > +} > + > +static int elan_smbus_prepare_fw_update(struct i2c_client *client) > +{ > + struct device *dev = &client->dev; > + int len; > + int error; > + enum tp_mode mode; > + u8 val[3]; > + u8 cmd[4] = {0x0F, 0x78, 0x00, 0x06}; > + u16 password; > + > + /* Get FW in which mode (IAP_MODE/MAIN_MODE) */ > + error = elan_smbus_iap_get_mode(client, &mode); > + if (error) > + return error; > + > + if (mode == MAIN_MODE) { > + > + /* set flash key */ > + error = elan_smbus_set_flash_key(client); > + if (error) > + return error; > + > + /* write iap password */ > + if (i2c_smbus_write_byte(client, > + ETP_SMBUS_IAP_PASSWORD_WRITE) < 0) { > + dev_err(dev, "cannot write iap password\n"); > + return -EIO; > + } > + > + error = i2c_smbus_write_block_data(client, ETP_SMBUS_IAP_CMD, > + sizeof(cmd), cmd); > + if (error) { > + dev_err(dev, "failed to write iap password: %d\n", > + error); > + return error; > + } > + > + /* > + * Read back password to make sure we enabled flash > + * successfully. > + */ > + len = i2c_smbus_read_block_data(client, > + ETP_SMBUS_IAP_PASSWORD_READ, > + val); > + if (len != sizeof(ETP_SMBUS_IAP_PASSWORD)) { > + error = len < 0 ? len : -EIO; > + dev_err(dev, "failed to read iap password: %d\n", > + error); > + return error; > + } > + > + password = be16_to_cpup((__be16 *)val); > + if (password != ETP_SMBUS_IAP_PASSWORD) { > + dev_err(dev, "wrong iap password = 0x%X\n", password); > + return -EIO; > + } > + > + /* Wait 30ms for MAIN_MODE change to IAP_MODE */ > + msleep(30); > + } > + > + error = elan_smbus_set_flash_key(client); > + if (error) > + return error; > + > + /* Reset IC */ > + error = elan_smbus_iap_reset(client); > + if (error) > + return error; > + > + return 0; > +} > + > + > +static int elan_smbus_write_fw_block(struct i2c_client *client, > + const u8 *page, u16 checksum, int idx) > +{ > + struct device *dev = &client->dev; > + int error; > + u16 result; > + u8 val[3]; > + > + /* > + * Due to the limitation of smbus protocol limiting > + * transfer to 32 bytes at a time, we must split block > + * in 2 transfers. > + */ > + error = i2c_smbus_write_block_data(client, > + ETP_SMBUS_WRITE_FW_BLOCK, > + ETP_FW_PAGE_SIZE / 2, > + page); > + if (error) { > + dev_err(dev, "Failed to write page %d (part %d): %d\n", > + idx, 1, error); > + return error; > + } > + > + error = i2c_smbus_write_block_data(client, > + ETP_SMBUS_WRITE_FW_BLOCK, > + ETP_FW_PAGE_SIZE / 2, > + page + ETP_FW_PAGE_SIZE / 2); > + if (error) { > + dev_err(dev, "Failed to write page %d (part %d): %d\n", > + idx, 2, error); > + return error; > + } > + > + > + /* Wait for F/W to update one page ROM data. */ > + usleep_range(8000, 10000); > + > + error = i2c_smbus_read_block_data(client, > + ETP_SMBUS_IAP_CTRL_CMD, val); > + if (error < 0) { > + dev_err(dev, "Failed to read IAP write result: %d\n", > + error); > + return error; > + } > + > + result = be16_to_cpup((__be16 *)val); > + if (result & (ETP_FW_IAP_PAGE_ERR | ETP_FW_IAP_INTF_ERR)) { > + dev_err(dev, "IAP reports failed write: %04hx\n", > + result); > + return -EIO; > + } > + > + return 0; > +} > + > +static int elan_smbus_get_report(struct i2c_client *client, u8 *report) > +{ > + int len; > + > + len = i2c_smbus_read_block_data(client, > + ETP_SMBUS_PACKET_QUERY, > + &report[ETP_SMBUS_REPORT_OFFSET]); > + if (len < 0) { > + dev_err(&client->dev, "failed to read report data: %d\n", len); > + return len; > + } > + > + if (len != ETP_SMBUS_REPORT_LEN) { > + dev_err(&client->dev, > + "wrong report length (%d vs %d expected)\n", > + len, ETP_SMBUS_REPORT_LEN); > + return -EIO; > + } > + > + return 0; > +} > + > +static int elan_smbus_finish_fw_update(struct i2c_client *client, > + struct completion *fw_completion) > +{ > + /* No special handling unlike I2C transport */ > + return 0; > +} > + > +const struct elan_transport_ops elan_smbus_ops = { > + .initialize = elan_smbus_initialize, > + .sleep_control = elan_smbus_sleep_control, > + .power_control = elan_smbus_power_control, > + .set_mode = elan_smbus_set_mode, > + > + .calibrate = elan_smbus_calibrate, > + .calibrate_result = elan_smbus_calibrate_result, > + > + .get_baseline_data = elan_smbus_get_baseline_data, > + > + .get_version = elan_smbus_get_version, > + .get_sm_version = elan_smbus_get_sm_version, > + .get_product_id = elan_smbus_get_product_id, > + .get_checksum = elan_smbus_get_checksum, > + > + .get_max = elan_smbus_get_max, > + .get_resolution = elan_smbus_get_resolution, > + .get_num_traces = elan_smbus_get_num_traces, > + > + .iap_get_mode = elan_smbus_iap_get_mode, > + .iap_reset = elan_smbus_iap_reset, > + > + .prepare_fw_update = elan_smbus_prepare_fw_update, > + .write_fw_block = elan_smbus_write_fw_block, > + .finish_fw_update = elan_smbus_finish_fw_update, > + > + .get_report = elan_smbus_get_report, > +}; -- Dmitry