[RESEND PATCH V2 0/2] Add I2C and enable M41T0M6 RTC

[RESEND PATCH V2 0/2] Add I2C and enable M41T0M6 RTC

[Bhuvanchandra DV]

Add I2C support on Colibri VFxx moduels and enable M41T0M6 RTC
available on Colibri carrier boards.

Bhuvanchandra DV (2):
  ARM: dts: vf-colibri: Add I2C support
  ARM: dts: vf-colibri-eval-v3.dts: Enable ST-M41T0M6 RTC

 arch/arm/boot/dts/vf-colibri-eval-v3.dtsi |   12 +++++++++++-
 arch/arm/boot/dts/vf-colibri.dtsi         |   13 +++++++++++++
 2 files changed, 24 insertions(+), 1 deletion(-)

-- 
1.7.9.5

[RESEND PATCH V2 1/2] ARM: dts: vf-colibri: Add I2C support

[Bhuvanchandra DV]

Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
---
 arch/arm/boot/dts/vf-colibri-eval-v3.dtsi |    6 +++++-
 arch/arm/boot/dts/vf-colibri.dtsi         |   13 +++++++++++++
 2 files changed, 18 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
index 80e8fbc..7324bdc 100644
--- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
@@ -33,6 +33,10 @@
 	status = "okay";
 };
 
+&i2c0 {
+	status = "okay";
+};
+
 &pwm0 {
 	status = "okay";
 };
@@ -51,4 +55,4 @@
 
 &uart2 {
 	status = "okay";
-};
\ No newline at end of file
+};
diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi
index ab40367..471eec0 100644
--- a/arch/arm/boot/dts/vf-colibri.dtsi
+++ b/arch/arm/boot/dts/vf-colibri.dtsi
@@ -39,6 +39,12 @@
 	pinctrl-0 = <&pinctrl_fec1>;
 };
 
+&i2c0 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0>;
+};
+
 &pwm0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm0>;
@@ -102,6 +108,13 @@
 			>;
 		};
 
+		pinctrl_i2c0: i2c0grp {
+			fsl,pins = <
+				VF610_PAD_PTB14__I2C0_SCL		0x37ff
+				VF610_PAD_PTB15__I2C0_SDA		0x37ff
+			>;
+		};
+
 		pinctrl_pwm0: pwm0grp {
 			fsl,pins = <
 				VF610_PAD_PTB0__FTM0_CH0		0x1182
-- 
1.7.9.5

[RESEND PATCH V2 2/2] ARM: dts: vf-colibri-eval-v3.dts: Enable ST-M41T0M6 RTC

[Bhuvanchandra DV]

ST-M41T0M6 is available on Colibri carrier boards.
Hence enable M41T0M6 RTC.

Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
---
 arch/arm/boot/dts/vf-colibri-eval-v3.dtsi |    6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
index 7324bdc..20251a3 100644
--- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
@@ -35,6 +35,12 @@
 
 &i2c0 {
 	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc: m41t0m6@68 {
+		compatible = "st,m41t00";
+		reg = <0x68>;
+	};
 };
 
 &pwm0 {
-- 
1.7.9.5

Re: [RESEND PATCH V2 0/2] Add I2C and enable M41T0M6 RTC

[Shawn Guo]

On Thu, Nov 13, 2014 at 10:05:30AM +0530, Bhuvanchandra DV wrote:
> Add I2C support on Colibri VFxx moduels and enable M41T0M6 RTC
> available on Colibri carrier boards.
> 
> Bhuvanchandra DV (2):
>   ARM: dts: vf-colibri: Add I2C support
>   ARM: dts: vf-colibri-eval-v3.dts: Enable ST-M41T0M6 RTC

Applied both, thanks.

> 
>  arch/arm/boot/dts/vf-colibri-eval-v3.dtsi |   12 +++++++++++-
>  arch/arm/boot/dts/vf-colibri.dtsi         |   13 +++++++++++++
>  2 files changed, 24 insertions(+), 1 deletion(-)
> 
> -- 
> 1.7.9.5
>