LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Steven Rostedt <rostedt@goodmis.org>
To: linux-kernel@vger.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>,
	Ingo Molnar <mingo@kernel.org>,
	Andrew Morton <akpm@linux-foundation.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	Mathieu Desnoyers <mathieu.desnoyers@efficios.com>,
	"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Subject: [PATCH 2/3] tracing: Move enabling tracepoints to just after mm_init()
Date: Sun, 14 Dec 2014 11:41:06 -0500
Message-ID: <20141214164804.150181588@goodmis.org> (raw)
In-Reply-To: <20141214164104.307127356@goodmis.org>


[-- Attachment #0: 0002-tracing-Move-enabling-tracepoints-to-just-after-mm_i.patch --]
[-- Type: text/plain, Size: 4373 bytes --]

From: "Steven Rostedt (Red Hat)" <rostedt@goodmis.org>

Enabling tracepoints at boot up can be very useful. The tracepoint
can be initialized right after memory has been. There's no need to
wait for the early_initcall() to be called. That's too late for some
things that can use tracepoints for debugging. Move the logic to
enable tracepoints out of the initcalls and into init/main.c to
right after mm_init().

This also allows trace_printk() to be used early too.

Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1412121539300.16494@nanos

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
---
 include/linux/ftrace.h        |  6 ++++++
 init/main.c                   |  3 +++
 kernel/trace/trace.c          |  8 +++++++-
 kernel/trace/trace.h          | 13 +++++++++++++
 kernel/trace/trace_events.c   | 10 ++++++++--
 kernel/trace/trace_syscalls.c |  7 ++-----
 6 files changed, 39 insertions(+), 8 deletions(-)

diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
index ed501953f0b2..f4bc14b7d444 100644
--- a/include/linux/ftrace.h
+++ b/include/linux/ftrace.h
@@ -39,6 +39,12 @@
 # define FTRACE_FORCE_LIST_FUNC 0
 #endif
 
+/* Main tracing buffer and events set up */
+#ifdef CONFIG_TRACING
+void trace_init(void);
+#else
+static inline void trace_init(void) { }
+#endif
 
 struct module;
 struct ftrace_hash;
diff --git a/init/main.c b/init/main.c
index 800a0daede7e..060e60b6aa59 100644
--- a/init/main.c
+++ b/init/main.c
@@ -561,6 +561,9 @@ asmlinkage __visible void __init start_kernel(void)
 	trap_init();
 	mm_init();
 
+	/* trace_printk() and trace points may be used after this */
+	trace_init();
+
 	/*
 	 * Set up the scheduler prior starting any interrupts (such as the
 	 * timer interrupt). Full topology setup happens at smp_init()
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 4ceb2546c7ef..ec3ca694665f 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -6876,6 +6876,13 @@ out:
 	return ret;
 }
 
+void __init trace_init(void)
+{
+	tracer_alloc_buffers();
+	init_ftrace_syscalls();
+	trace_event_init();	
+}
+
 __init static int clear_boot_tracer(void)
 {
 	/*
@@ -6895,6 +6902,5 @@ __init static int clear_boot_tracer(void)
 	return 0;
 }
 
-early_initcall(tracer_alloc_buffers);
 fs_initcall(tracer_init_debugfs);
 late_initcall(clear_boot_tracer);
diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h
index 3255dfb054a0..c138c149d6ef 100644
--- a/kernel/trace/trace.h
+++ b/kernel/trace/trace.h
@@ -1301,4 +1301,17 @@ int perf_ftrace_event_register(struct ftrace_event_call *call,
 #define perf_ftrace_event_register NULL
 #endif
 
+#ifdef CONFIG_FTRACE_SYSCALLS
+void init_ftrace_syscalls(void);
+#else
+static inline void init_ftrace_syscalls(void) { }
+#endif
+
+#ifdef CONFIG_EVENT_TRACING
+void trace_event_init(void);
+#else
+static inline void __init trace_event_init(void) { }
+#endif
+
+
 #endif /* _LINUX_KERNEL_TRACE_H */
diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c
index f9d0cbe014b7..fd9deb0e03f0 100644
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -2477,8 +2477,14 @@ static __init int event_trace_init(void)
 #endif
 	return 0;
 }
-early_initcall(event_trace_memsetup);
-core_initcall(event_trace_enable);
+
+void __init trace_event_init(void)
+{
+	event_trace_memsetup();
+	init_ftrace_syscalls();
+	event_trace_enable();
+}
+
 fs_initcall(event_trace_init);
 
 #ifdef CONFIG_FTRACE_STARTUP_TEST
diff --git a/kernel/trace/trace_syscalls.c b/kernel/trace/trace_syscalls.c
index a72f3d8d813e..ec239771c175 100644
--- a/kernel/trace/trace_syscalls.c
+++ b/kernel/trace/trace_syscalls.c
@@ -514,7 +514,7 @@ unsigned long __init __weak arch_syscall_addr(int nr)
 	return (unsigned long)sys_call_table[nr];
 }
 
-static int __init init_ftrace_syscalls(void)
+void __init init_ftrace_syscalls(void)
 {
 	struct syscall_metadata *meta;
 	unsigned long addr;
@@ -524,7 +524,7 @@ static int __init init_ftrace_syscalls(void)
 				    GFP_KERNEL);
 	if (!syscalls_metadata) {
 		WARN_ON(1);
-		return -ENOMEM;
+		return;
 	}
 
 	for (i = 0; i < NR_syscalls; i++) {
@@ -536,10 +536,7 @@ static int __init init_ftrace_syscalls(void)
 		meta->syscall_nr = i;
 		syscalls_metadata[i] = meta;
 	}
-
-	return 0;
 }
-early_initcall(init_ftrace_syscalls);
 
 #ifdef CONFIG_PERF_EVENTS
 
-- 
2.1.3



  parent reply index

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-14 16:41 [PATCH 0/3] tracing: Enable tracepoints early and allow printk to use them Steven Rostedt
2014-12-14 16:41 ` [PATCH 1/3] tracepoints: Do not use call_rcu_sched() before early_initcall() Steven Rostedt
2014-12-14 16:53   ` Steven Rostedt
2014-12-14 18:08     ` Paul E. McKenney
2014-12-14 18:15       ` Steven Rostedt
2014-12-14 18:18         ` Paul E. McKenney
2014-12-14 18:25           ` Steven Rostedt
2014-12-14 20:23             ` Paul E. McKenney
2014-12-14 17:05   ` Mathieu Desnoyers
2014-12-14 17:14     ` Steven Rostedt
2014-12-14 17:21       ` Steven Rostedt
2014-12-14 17:29         ` Mathieu Desnoyers
2014-12-14 17:44           ` Steven Rostedt
2014-12-14 18:13             ` Paul E. McKenney
2014-12-14 16:41 ` Steven Rostedt [this message]
2014-12-14 18:14   ` [PATCH 2/3] tracing: Move enabling tracepoints to just after mm_init() Paul E. McKenney
2014-12-14 18:20     ` Steven Rostedt
2014-12-14 20:26       ` Paul E. McKenney
2014-12-14 16:41 ` [PATCH 3/3] tracing: Add tp_printk cmdline to have tracepoints go to printk() Steven Rostedt
2014-12-14 17:07 ` [PATCH 0/3] tracing: Enable tracepoints early and allow printk to use them Steven Rostedt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20141214164804.150181588@goodmis.org \
    --to=rostedt@goodmis.org \
    --cc=akpm@linux-foundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mathieu.desnoyers@efficios.com \
    --cc=mingo@kernel.org \
    --cc=paulmck@linux.vnet.ibm.com \
    --cc=tglx@linutronix.de \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git