early console in setup code [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.19.0-rc4-g8dd4553 (kbuild@jaketown) (gcc version 4.9.1 (Debian 4.9.1-19) ) #5 PREEMPT Sun Feb 1 14:16:18 CST 2015 [ 0.000000] KERNEL supported cpus: [ 0.000000] Centaur CentaurHauls [ 0.000000] UMC UMC UMC UMC [ 0.000000] CPU: vendor_id 'GenuineIntel' unknown, using generic init. [ 0.000000] CPU: Your system may be unstable. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013fdffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000013fe0000-0x0000000013ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x13fe0 max_arch_pfn = 0x1000000 [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000f0eb0-0x000f0ebf] mapped at [c00f0eb0] [ 0.000000] mpc: f0ec0-f0fa4 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] initial memory mapped: [mem 0x00000000-0x05dfffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x12400000-0x125fffff] [ 0.000000] [mem 0x12400000-0x125fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x123fffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x123fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x12600000-0x13fdffff] [ 0.000000] [mem 0x12600000-0x13dfffff] page 2M [ 0.000000] [mem 0x13e00000-0x13fdffff] page 4k [ 0.000000] BRK [0x058bf000, 0x058bffff] PGTABLE [ 0.000000] BRK [0x058c0000, 0x058c0fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x12793000-0x13fd7fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x000F0C90 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x13FE18BD 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x13FE0B37 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x13FE0040 000AF7 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 0x13FE0000 000040 [ 0.000000] ACPI: SSDT 0x13FE0BAB 000C5A (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0x13FE1805 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x13FE1885 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffc000 ( fee00000) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 319MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 13fe0000 [ 0.000000] low ram: 0 - 13fe0000 [ 0.000000] cma: dma_contiguous_reserve(limit 13fe0000) [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:13fdf001, primary cpu clock [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x13fdffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x13fdffff] [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x13fdffff] [ 0.000000] On node 0 totalpages: 81790 [ 0.000000] free_area_init_node: node 0, pgdat c51db060, node_mem_map d2513020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 608 pages used for memmap [ 0.000000] Normal zone: 77792 pages, LIFO batch:15 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x608 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffc000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] Using ACPI for processor (LAPIC) configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] mpc: f0ec0-f0fa4 [ 0.000000] MPTABLE: OEM ID: BOCHSCPU [ 0.000000] MPTABLE: Product ID: 0.1 [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Lint: type 3, pol 0, trig 0, bus 01, IRQ 00, APIC ID 0, APIC LINT 00 [ 0.000000] Lint: type 1, pol 0, trig 0, bus 01, IRQ 00, APIC ID ff, APIC LINT 01 [ 0.000000] Processors: 1 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 503e9c0 [ 0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 81150 [ 0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/i386-randconfig-j1-01312211/linux-devel:devel-jaketown-smoke-201501312324:8dd45530cb1353fbd058d42a3e6d32bde811429b:bisect-linux-4/.vmlinuz-8dd45530cb1353fbd058d42a3e6d32bde811429b-20150201141752-18-ivb41 branch=linux-devel/devel-jaketown-smoke-201501312324 BOOT_IMAGE=/kernel/i386-randconfig-j1-01312211/8dd45530cb1353fbd058d42a3e6d32bde811429b/vmlinuz-3.19.0-rc4-g8dd4553 drbd.minor_count=8 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 279988K/327160K available (7457K kernel code, 1733K rwdata, 2960K rodata, 512K init, 6328K bss, 47172K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfffcd000 - 0xfffff000 ( 200 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xd47e0000 - 0xffbfe000 ( 692 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd3fe0000 ( 319 MB) [ 0.000000] .init : 0xc51e1000 - 0xc5261000 ( 512 kB) [ 0.000000] .data : 0xc4d48b02 - 0xc51df760 (4699 kB) [ 0.000000] .text : 0xc4600000 - 0xc4d48b02 (7458 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] CPU 0 irqstacks, hard=d2008000 soft=d200a000 [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.000000] ... CHAINHASH_SIZE: 32768 [ 0.000000] memory used by lock dependency info: 5151 kB [ 0.000000] per task-struct memory footprint: 1920 bytes [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 2693.508 MHz processor [ 0.008000] Calibrating delay loop (skipped) preset value.. 5387.01 BogoMIPS (lpj=10774032) [ 0.008000] pid_max: default: 32768 minimum: 301 [ 0.008000] ACPI: Core revision 20141107 [ 0.008000] ACPI: All ACPI Tables successfully acquired [ 0.008035] ACPI: setting ELCR to 0200 (from 0c00) [ 0.008437] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.008970] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.009758] Initializing cgroup subsys freezer [ 0.010124] Initializing cgroup subsys blkio [ 0.010465] Initializing cgroup subsys debug [ 0.010850] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.010850] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.011728] CPU: GenuineIntel Common KVM processor (fam: 0f, model: 06, stepping: 01) [ 0.014667] Performance Events: no PMU driver, software events only. [ 0.015527] Getting VERSION: 1050014 [ 0.015832] Getting VERSION: 1050014 [ 0.016004] Getting ID: 0 [ 0.016228] Getting ID: f000000 [ 0.016485] Getting LVT0: 8700 [ 0.016740] Getting LVT1: 8400 [ 0.017006] enabled ExtINT on CPU#0 [ 0.017296] Using local APIC timer interrupts. [ 0.017296] calibrating APIC timer ... [ 0.020000] ... lapic delta = 6250716 [ 0.020000] ... PM-Timer delta = 358011 [ 0.020000] ... PM-Timer result ok [ 0.020000] ..... delta 6250716 [ 0.020000] ..... mult: 268466207 [ 0.020000] ..... calibration result: 4000458 [ 0.020000] ..... CPU clock speed is 2693.3807 MHz. [ 0.020000] ..... host bus clock speed is 1000.0458 MHz. [ 0.020000] NMI watchdog: disabled (cpu0): hardware events not enabled [ 0.020000] devtmpfs: initialized [ 0.020000] pinctrl core: initialized pinctrl subsystem [ 0.020000] RTC time: 14:16:56, date: 02/01/15 [ 0.020000] NET: Registered protocol family 16 [ 0.020000] EISA bus registered [ 0.032017] cpuidle: using governor ladder [ 0.044017] cpuidle: using governor menu [ 0.044700] ACPI: bus type PCI registered [ 0.045249] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX. [ 0.045827] PCI: PCI BIOS revision 2.10 entry at 0xfd456, last bus=0 [ 0.046333] PCI: Using configuration type 1 for base access [ 0.051778] ACPI: Added _OSI(Module Device) [ 0.052003] ACPI: Added _OSI(Processor Device) [ 0.052366] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.052741] ACPI: Added _OSI(Processor Aggregator Device) [ 0.056580] ACPI: Interpreter enabled [ 0.056886] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580) [ 0.057641] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580) [ 0.058414] ACPI: (supports S0 S3 S5) [ 0.058711] ACPI: Using PIC for interrupt routing [ 0.059108] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.065233] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.065740] acpi PNP0A03:00: _OSC: OS supports [Segments MSI] [ 0.066209] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.066843] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.067812] PCI host bridge to bus 0000:00 [ 0.068008] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.068459] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.068932] pci_bus 0000:00: root bus resource [io 0x0d00-0xadff] [ 0.069453] pci_bus 0000:00: root bus resource [io 0xae0f-0xaeff] [ 0.069925] pci_bus 0000:00: root bus resource [io 0xaf20-0xafdf] [ 0.070443] pci_bus 0000:00: root bus resource [io 0xafe4-0xffff] [ 0.070915] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.071488] pci_bus 0000:00: root bus resource [mem 0x14000000-0xfebfffff] [ 0.072038] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.072900] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.073848] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.076608] pci 0000:00:01.1: reg 0x20: [io 0xc040-0xc04f] [ 0.077840] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.078416] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.078926] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.079512] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.080231] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.080971] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI [ 0.081570] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB [ 0.082418] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 0.083853] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref] [ 0.084889] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff] [ 0.090222] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref] [ 0.090980] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 0.092004] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff] [ 0.093236] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f] [ 0.097408] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 0.098171] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000 [ 0.099071] pci 0000:00:04.0: reg 0x10: [mem 0xfebf1000-0xfebf100f] [ 0.102194] pci_bus 0000:00: on NUMA node 0 [ 0.102977] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.103640] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.104274] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.104874] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.105435] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.106295] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.106736] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.107414] vgaarb: loaded [ 0.107623] vgaarb: bridge control possible 0000:00:02.0 [ 0.108306] SCSI subsystem initialized [ 0.108670] libata version 3.00 loaded. [ 0.109038] media: Linux media interface: v0.10 [ 0.109417] Linux video capture interface: v2.00 [ 0.109783] EDAC MC: Ver: 3.0.0 [ 0.110195] EDAC DEBUG: edac_mc_sysfs_init: device mc created [ 0.110825] PCI: Using ACPI for IRQ routing [ 0.111174] PCI: pci_cache_line_size set to 64 bytes [ 0.111637] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.112004] e820: reserve RAM buffer [mem 0x13fe0000-0x13ffffff] [ 0.113012] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.113629] Switched to clocksource kvm-clock [ 0.114098] FS-Cache: Loaded [ 0.114368] pnp: PnP ACPI init [ 0.114683] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.115267] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.115773] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.115773] pnp 00:03: [dma 2] [ 0.115773] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.115773] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.116237] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.117022] pnp: PnP ACPI: found 6 devices [ 0.152410] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.152890] pci_bus 0000:00: resource 5 [io 0x0d00-0xadff] [ 0.153334] pci_bus 0000:00: resource 6 [io 0xae0f-0xaeff] [ 0.153803] pci_bus 0000:00: resource 7 [io 0xaf20-0xafdf] [ 0.154275] pci_bus 0000:00: resource 8 [io 0xafe4-0xffff] [ 0.154713] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff] [ 0.155233] pci_bus 0000:00: resource 10 [mem 0x14000000-0xfebfffff] [ 0.155776] NET: Registered protocol family 1 [ 0.156136] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.156643] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.157126] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.157648] pci 0000:00:02.0: Video device with shadowed ROM [ 0.158116] PCI: CLS 0 bytes, default 64 [ 0.158459] Kernel panic - not syncing: junk in compressed archive [ 0.158932] CPU: 0 PID: 1 Comm: swapper Not tainted 3.19.0-rc4-g8dd4553 #5 [ 0.159485] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 0.160116] d2121770 d2121770 d2045edc c4d34984 d2045ef4 c4d33ea5 c5036200 d2121770 [ 0.160116] c5036200 c51e2b1f d2045f10 c51e2b44 c4f58381 c4f12230 d2121770 c5036200 [ 0.160116] c51e2b1f d2045f84 c460041e 000000d0 c4f1c126 c51e2b1f c51e14ba c502d814 [ 0.160116] Call Trace: [ 0.160116] [] dump_stack+0x16/0x18 [ 0.160116] [] panic+0x87/0x1a2 [ 0.160116] [] ? do_format+0x71/0x71 [ 0.160116] [] populate_rootfs+0x25/0xee [ 0.160116] [] ? do_format+0x71/0x71 [ 0.160116] [] do_one_initcall+0x7e/0x1d0 [ 0.160116] [] ? do_format+0x71/0x71 [ 0.160116] [] ? repair_env_string+0x12/0x54 [ 0.160116] [] kernel_init_freeable+0xdb/0x158 [ 0.160116] [] kernel_init+0xb/0xe0 [ 0.160116] [] ? schedule_tail+0x12/0x60 [ 0.160116] [] ret_from_kernel_thread+0x20/0x30 [ 0.160116] [] ? rest_init+0xa0/0xa0 Elapsed time: 5 qemu-system-x86_64 -cpu kvm64 -enable-kvm -kernel /kernel/i386-randconfig-j1-01312211/8dd45530cb1353fbd058d42a3e6d32bde811429b/vmlinuz-3.19.0-rc4-g8dd4553 -append 'hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/i386-randconfig-j1-01312211/linux-devel:devel-jaketown-smoke-201501312324:8dd45530cb1353fbd058d42a3e6d32bde811429b:bisect-linux-4/.vmlinuz-8dd45530cb1353fbd058d42a3e6d32bde811429b-20150201141752-18-ivb41 branch=linux-devel/devel-jaketown-smoke-201501312324 BOOT_IMAGE=/kernel/i386-randconfig-j1-01312211/8dd45530cb1353fbd058d42a3e6d32bde811429b/vmlinuz-3.19.0-rc4-g8dd4553 drbd.minor_count=8' -initrd /kernel-tests/initrd/quantal-core-i386.cgz -m 320 -smp 2 -net nic,vlan=1,model=e1000 -net user,vlan=1 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-quantal-ivb41-108 -serial file:/dev/shm/kboot/serial-quantal-ivb41-108 -daemonize -display none -monitor null